Search Legislation

The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012

Status:

Point in time view as at 02/01/2013.

Changes to legislation:

There are currently no known outstanding effects for the The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, Cross Heading: Importers. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

ImportersU.K.

Prohibition on placing EEE on the marketU.K.

23.  An importer must not place EEE on the market unless—

(a)the EEE complies with the requirements of regulation 3;

(b)the importer has ensured that the manufacturer has done all of the following in relation to the EEE—

(i)carried out the conformity assessment procedure and drawn up the technical documentation in accordance with paragraph (1) of regulation 12 (conformity assessment procedure and drawing up of technical documentation);

(ii)affixed the CE marking in accordance with regulation 16 (EEE to bear CE marking);

(iii)complied with paragraph (1) of regulation 18 (information identifying EEE and manufacturer); and

(iv)complied with regulation 19 (register of EEE);

(c)the EEE is accompanied by the required documents; and

(d)the importer has complied with regulation 24 (information identifying importers).

Information identifying importersU.K.

24.—(1) An importer must ensure that the following information is marked on the EEE—

(a)the importer’s name, registered trade name or registered trade mark; and

(b)an address at which the importer can be contacted.

(2) Where it is not possible to mark the information on the EEE the information may instead be marked on the packaging of the EEE or in a document accompanying the EEE.

(3) Where the importer complies with other applicable EU legislation, or legislation giving effect to EU legislation, containing provisions for the affixing of the importer’s name and address which are at least as stringent as those set out in this regulation, it is sufficient to satisfy this regulation.

Monitoring of EEEU.K.

25.  An importer must keep a register of any EEE which they have placed on the market—

(a)in relation to which any provision of these Regulations has not been complied with; or

(b)any EEE which has been recalled,

and keep distributors informed of these matters.

Non-compliant EEEU.K.

26.—(1) If an importer has reason to believe that EEE which the importer was intending to place on the market does not comply with the requirements of regulation 3, the importer must inform the manufacturer and the market surveillance authority of the non-compliance.

(2) An importer who has placed EEE on the market and has reason to believe that any provision of these Regulations has not been complied with in relation to the EEE must immediately—

(a)take the corrective measures which are necessary to ensure that the provision is complied with in relation to the EEE, withdraw the EEE or recall it, if appropriate; and

(b)provide the market surveillance authority and the competent national authorities of any other member States in which they made the EEE available with information about the non-compliance and any corrective measures taken in accordance with sub-paragraph (a).

Retention of documentation and co-operation with the authoritiesU.K.

27.—(1) An importer must for a period of ten years from the day on which they placed an item of EEE on the market—

(a)keep a copy of the EU declaration of conformity for the EEE; and

(b)ensure that the technical documentation is available for inspection by the market surveillance authority on request by the authority.

(2) The market surveillance authority may during the ten year period mentioned in paragraph (1) request an importer who has placed EEE on the market to—

(a)provide it within such period as the authority may specify with all the information and documentation necessary to demonstrate that the provisions of these Regulations have been complied with in relation to the EEE; and

(b)co-operate with that authority on any action taken or to be taken to ensure that the provisions of these Regulations are complied with in relation to the EEE.

(3) A request under paragraph (2)(a) must be accompanied by the reasons for making the request.

(4) The importer must comply with a request under paragraph (2).

(5) The information and documentation supplied pursuant to a request under paragraph (2)(a) must be drawn up in or translated into English.

Duty in certain circumstances to comply with manufacturers’ duties in place of importers’ dutiesU.K.

28.—(1) An importer who places EEE on the market under the importer’s name or trademark must comply with all of the duties imposed by these Regulations on manufacturers, and in such a case, a reference to the manufacturer in these Regulations is to be taken as being a reference to the importer.

(2) Such an importer is not required to comply with the duties imposed by these Regulations on importers.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources