- Latest available (Revised)
- Original (As made)
There are currently no known outstanding effects for the The Control of Asbestos Regulations 2012,
PART 1
.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
1. These Regulations may be cited as the Control of Asbestos Regulations 2012 and come into force on 6thApril 2012.
2.—(1) In these Regulations—
“adequate” means adequate having regard only to the nature and degree of exposure to asbestos, and “adequately” must be construed accordingly;
“appointed doctor” means a registered medical practitioner appointed for the time being in writing by the Executive for the purpose of these Regulations;
“approved” means approved for the time being in writing by the Executive;
“asbestos” means the following fibrous silicates—
asbestos actinolite, CAS No 77536-66-4;
asbestos grunerite (amosite), CAS No 12172-73-5;
asbestos anthophyllite, CAS No 77536-67-5;
chrysotile, CAS No 12001-29-5 or CAS No 132207-32-0;
crocidolite, CAS No 12001-28-4; and
asbestos tremolite, CAS No 77536-68-6,
and reference to “CAS” followed by a numerical sequence are references to CAS Registry Numbers assigned to chemicals by the Chemical Abstracts Service, a division of the American Chemical Society;
“asbestos cement” means a material which is predominantly a mixture of cement and chrysotile and which when in a dry state absorbs less than 30% water by weight;
“asbestos coating” means a surface coating which contains asbestos for fire protection, heat insulation or sound insulation but does not include textured decorative coatings;
“asbestos insulating board” (AIB) means any flat sheet, tile or building board consisting of a mixture of asbestos and other material except—
asbestos cement; or
any article of bitumen, plastic, resin or rubber which contains asbestos, and the thermal or acoustic properties of the article are incidental to its main purpose;
“asbestos insulation” means any material containing asbestos which is used for thermal, acoustic or other insulation purposes (including fire protection) except—
asbestos cement, asbestos coating or asbestos insulating board; or
any article of bitumen, plastic, resin or rubber which contains asbestos and the thermal and acoustic properties of that article are incidental to its main purpose;
“the control limit” means a concentration of asbestos in the atmosphere when measured in accordance with the 1997 WHO recommended method, or by a method giving equivalent results to that method approved by the Executive, of 0.1 fibres per cubic centimetre of air averaged over a continuous period of 4 hours;
“control measure” means a measure taken to prevent or reduce exposure to asbestos (including the provision of systems of work and supervision, the cleaning of workplaces, premises, plant and equipment, and the provision and use of engineering controls and personal protective equipment);
“emergency services” include—
police, fire, rescue and ambulance services;
Her Majesty's Coastguard;
“employment medical adviser” means an employment medical adviser appointed under section 56 of the 1974 Act M1;
[F1“enforcing authority” means the Executive, the Office for Nuclear Regulation, local authority or [F2Office of Rail Regulation] [F2Office of Rail and Road] determined in accordance with—
section 18(1A) of the Health and Safety at Work etc. Act 1974;
the provisions of the Health and Safety (Enforcing Authority) Regulations 1998; and
the provisions of the Health and Safety (Enforcing Authority for Railways and Other Guided Transport Systems) Regulations 2006;]
“ISO 17020” means European Standard EN ISO/IEC 17020, “General criteria for the operation of various types of bodies performing inspection” as revised or reissued from time to time and accepted by the Comit Europen de Normalisation lectrotechnique (CEN/CENELEC) M2;
“ISO 17025” means European Standard EN ISO/IEC 17025, “General requirements for the competence of testing and calibration laboratories” as revised or reissued from time to time and accepted by the Comit Europen de Normalisation lectrotechnique (CEN/CENELEC) M3;
“licensable work with asbestos” is work—
where the exposure to asbestos of employees is not sporadic and of low intensity; or
in relation to which the risk assessment cannot clearly demonstrate that the control limit will not be exceeded; or
on asbestos coating; or
on asbestos insulating board or asbestos insulation for which the risk assessment—
demonstrates that the work is not sporadic and of low intensity, or
cannot clearly demonstrate that the control limit will not be exceeded, or
demonstrates that the work is not short duration work;
“medical examination” includes any laboratory tests and X-rays that a relevant doctor may require;
“personal protective equipment” means all equipment (including clothing) which is intended to be worn or held by a person at work and which protects that person against one or more risks to that person's health, and any addition or accessory designed to meet that objective;
“relevant doctor” means an appointed doctor or an employment medical adviser. In relation to work with asbestos which is not licensable work with asbestos and is not exempted by regulation 3(2) “relevant doctor” also includes an appropriate fully registered medical practitioner who holds a licence to practice;
[F3“relevant nuclear premises” means premises which are, or are on—
a GB nuclear site (within the meaning given in section 68 of the Energy Act 2013),
authorised defence site (within the meaning given in regulation 2(1) of the Health and Safety (Enforcing Authority) Regulations 1998),
a nuclear new build site (within the meaning given in regulation 2A of those Regulations);]
“risk assessment” means the assessment of risk required by regulation 6(1)(a);
“textured decorative coatings” means decorative and textured finishes, such as paints and ceiling and wall plasters which are used to produce visual effects and which contain asbestos. These coatings are designed to be decorative and any thermal or acoustic properties are incidental to their purpose, and
“the 1997 WHO recommended method” means the publication “Determination of airborne fibre concentrations. A recommended method, by phase-contrast optical microscopy (membrane filter method)”, WHO (World Health Organisation), Geneva 1997 M4.
(2) A reference to work with asbestos in these Regulations includes—
(a)work which consists of the removal, repair or disturbance of asbestos or materials containing asbestos;
(b)work which is ancillary to such work; and
(c)supervision of such work and such ancillary work.
(3) For the purposes of these Regulations, work with asbestos is not “short duration work” if, in any seven day period—
(a)that work, including any ancillary work liable to disturb asbestos, takes more than two hours; or
(b)any person carries out that work for more than one hour.
(4) For the purpose of these Regulations, no exposure to asbestos will be sporadic and of low intensity if the concentration of asbestos in the atmosphere, when measured in accordance with the 1997 WHO recommended method or by a method giving equivalent results to that method and approved by the Executive, exceeds or is liable to exceed the concentration approved in relation to a specified reference period for the purposes of this paragraph by the Executive.
(5) For the purposes of these Regulations, except in accordance with regulation 11(3) and (5), in determining whether an employee is exposed to asbestos or whether the extent of such exposure exceeds the control limit, no account must be taken of respiratory protective equipment which, for the time being, is being worn by that employee.
(6) In these Regulations the provisions of Appendix 7 to Annex XVII of the REACH Regulations M5, which determine the labelling requirements of articles containing asbestos, are reproduced in Schedule 2 (with minor changes reflecting the practical implementation of the requirements).
Textual Amendments
F1Words in reg. 2 substituted (1.4.2014) by The Energy Act 2013 (Office for Nuclear Regulation) (Consequential Amendments, Transitional Provisions and Savings) Order 2014 (S.I. 2014/469), art. 1(2), Sch. 3 para. 145(2)(a) (with Sch. 4)
F2Words in reg. 2(1) substituted (E.W.S.) (16.10.2015) by The Office of Rail Regulation (Change of Name) Regulations 2015 (S.I. 2015/1682), reg. 1(2), Sch. para. 10(dd)
F3Words in reg. 2 inserted (1.4.2014) by The Energy Act 2013 (Office for Nuclear Regulation) (Consequential Amendments, Transitional Provisions and Savings) Order 2014 (S.I. 2014/469), art. 1(2), Sch. 3 para. 145(2)(b) (with Sch. 4)
Marginal Citations
M11974 c.37; section 56(3) was amended by the Medical Act 1983 (Amendment Order) 2002, S.I. 2002/3135.
M2The most recent version is reference number EN ISO/IEC 17020: 2004, accepted by CEN/CENELEC on 15th July 2004.
M3The most recent version is reference number EN ISO/IEC 17025:2005, accepted by CEN/CENELEC on 15th March 2005.
M4ISBN 92 4 154496 1.
M5O.J No L 396 30.12.2006, p840.
3.—(1) These Regulations apply to a self-employed person as they apply to an employer and an employee and as if that self-employed person were both an employer and an employee.
(2) Regulations 9 (notification of work with asbestos), 18(1)(a) (designated areas) and 22 (health records and medical surveillance) do not apply where—
(a)the exposure to asbestos of employees is sporadic and of low intensity; and
(b)it is clear from the risk assessment that the exposure to asbestos of any employee will not exceed the control limit; and
(c)the work involves—
(i)short, non-continuous maintenance activities in which only non-friable materials are handled, or
(ii)removal without deterioration of non-degraded materials in which the asbestos fibres are firmly linked in a matrix, or
(iii)encapsulation or sealing of asbestos-containing materials which are in good condition, or
(iv)air monitoring and control, and the collection and analysis of samples to ascertain whether a specific material contains asbestos.
(3) Where a duty is placed by these Regulations on an employer in respect of employees of that employer, the employer is, so far as is reasonably practicable, under a like duty in respect of any other person, whether at work or not, who may be affected by the work activity carried out by that employer except that the duties of the employer—
(a)under regulation 10 (information, instruction and training) do not extend to persons who are not employees of that employer unless those persons are on the premises where the work is being carried out; and
(b)under regulation 22 (health records and medical surveillance) do not extend to persons who are not employees of that employer.
(4) Regulation 17 (cleanliness of premises and plant), to the extent that it requires an employer to ensure that premises are thoroughly cleaned, does not apply—
(a)in England and Wales, to a fire and rescue authority within the meaning of section 1 of the Fire and Rescue Services Act 2004 M6 or, in Scotland, to [F4a relevant authority within the meaning of section 6 of the Fire (Scotland) Act 2005] [F4the Scottish Fire and Rescue Service], in respect of premises attended by its employees for the purpose of fighting a fire or in an emergency; or
(b)to the employer of persons who attend a ship in dock premises for the purpose of fighting a fire or in an emergency, in respect of any ship so attended,
and for the purposes of this paragraph “ship” includes all vessels and hovercraft which operate on water or land and water, and “dock premises” means a dock, wharf, quay, jetty or other place at which ships load or unload goods or embark or disembark passengers, together with neighbouring land or water which is used or occupied, or intended to be used or occupied, for those or incidental activities, and any part of a ship when used for those or incidental activities.
(5) These Regulations shall not apply to the master or crew of a ship or to the employer of such persons in respect of the normal shipboard activities of a ship's crew which are carried out solely by the crew under the direction of the master, and for the purposes of this paragraph “ship” includes every description of vessel used in navigation, other than a ship forming part of Her Majesty's Navy.
Textual Amendments
F4Words in reg. 3(4)(a) substituted (S.) (1.4.2013) by The Police and Fire Reform (Scotland) Act 2012 (Consequential Modifications and Savings) Order 2013 (S.S.I. 2013/119), art. 1, sch. 2 para. 27
Marginal Citations
M62004 c.21; section 1(2)(d) was amended by the Civil Contingencies Act 2004 (c.36), section 32(1) and Schedule 2, Part 1, paragraph 10(1) and (2).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: