- Latest available (Revised)
- Point in Time (01/01/2019)
- Original (As made)
Point in time view as at 01/01/2019.
There are currently no known outstanding effects for the The Waste Electrical and Electronic Equipment Regulations 2013, Section 66.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
66.—(1) An operator of an AATF or an approved exporter [F1must] provide reports to the appropriate authority—
(a)on or before 30th April in a relevant approval period in respect of the first quarter period in that approval period;
(b)on or before 31st July in a relevant approval period in respect of the second quarter period in that approval period;
(c)on or before 31st October in a relevant approval period in respect of the third quarter period in that approval period; and
(d)on or before 31st January in the year immediately following the end of a relevant approval period in respect of the fourth quarter period in that approval period.
(2) During the transitional period, the reports referred to in paragraph (1) [F1must], include details of—
(a)in the case of an AATF—
(i)the total amount in tonnes of WEEE received for treatment under these Regulations, and
(ii)the total amount in tonnes of WEEE delivered to another ATF for treatment under these Regulations,
(iii)where sub-paragraph (a)(ii) applies
(aa)the name and address of the operator of the ATF referred to in that sub-paragraph; and
(bb)the address of the ATF where the treatment referred to in that sub-paragraph was carried out;
(iv)the total amount in tonnes of WEEE in respect of which evidence of reuse as a whole appliance has been issued by that AATF under these Regulations,
(v)where sub-paragraph (iv) applies and the evidence relates to WEEE that has not been received at the premises of that AATF, the name and address of the reuse establishment or undertaking in receipt of that WEEE, and
(vi)where sub-paragraph (a)(i), (ii) or (iv) applies, details of the amounts in tonnes of WEEE [F1must] be provided by reference to the following categories—
(aa)each of the categories listed in Schedule 1 (excluding display equipment, appliances containing refrigerants, gas discharge lamps, LED light sources and photovoltaic panels),
(bb)display equipment,
(cc)appliances containing refrigerants,
(dd)gas discharge lamps, and LED light sources; and
(ee)photovoltaic panels
and in the case of each category [F1must] specify the amount in tonnes of WEEE from private households, WEEE from users other than private households and from or on behalf of which scheme it was received;
(b)in the case of an approved exporter, the total amount of WEEE in tonnes received and the total amount of WEEE in tonnes exported for reuse as a whole appliance, treatment, recovery or recycling by reference to the following categories—
(i)each of the categories listed in Schedule 1 (excluding display equipment, appliances containing refrigerants, gas discharge lamps, LED light sources and photovoltaic panels),
(ii)display equipment,
(iii)appliances containing refrigerants,
(iv)gas discharge lamps and LED light sources, and;
(v)photovoltaic panels
and in the case of each category [F1must] specify the amount in tonnes of WEEE from private households, WEEE from users other than private households and from or on behalf of which scheme it was received; and
(c)in relation to each scheme to whom an evidence note has been issued—
(i)the name of the scheme; and
(ii)the total tonnage of WEEE stated in all evidence notes issued to that scheme.
(3) In addition to the requirements in paragraph (2), the reports referred to in paragraph (1) [F1must] include details of the total amount in tonnes of non-obligated WEEE received by the AATF or approved exporter and [F1must] also specify the total amount in tonnes of non-obligated WEEE received by the AATF that was retained by the operator of a designated collection facility under regulation 53, by reference to the following categories—
(a)each of the categories listed in Schedule 1 (excluding display equipment, appliances containing refrigerants, gas discharge lamps, LED light sources and photovoltaic panels);
(b)display equipment;
(c)appliances containing refrigerants;
(d)gas discharge lamps and LED light sources; and
(e)photovoltaic panels.
(4) In addition to the requirements in paragraph (2), the report referred to in paragraph (1)(d) [F1must] include all of the information provided in the quarterly reports that relate to the relevant approval period.
(5) From 1st January 2014 until 31st December 2015 an operator of an AATF or an approved exporter [F1must] allow the appropriate authority to assess whether the conditions in Schedule 11 part 2 paragraph 22 have been met during the relevant approval period.
(6) From 1st January 2016 until 31st December 2018 an operator of an AATF or an approved exporter [F1must] allow the appropriate authority to assess whether the conditions in Schedule 11 part 2 paragraph 23 have been met during the relevant approval period.
(7) From 1st January 2019, an operator of an AATF or an approved exporter [F1must] allow the appropriate authority to assess whether the conditions in Schedule 11 part 2 paragraph [F224] have been met during the relevant approval period.
(8) From 1st January 2019, the reports referred to in paragraph (1) [F1must], include details of—
(a)in the case of an AATF—
(i)the total amount in tonnes of WEEE received for treatment under these Regulations, and
(ii)the total amount in tonnes of WEEE delivered to another ATF for treatment under these Regulations,
(iii)where sub-paragraph (a)(ii) applies
(aa)the name and address of the operator of the ATF referred to in that sub-paragraph; and
(bb)the address of the ATF where the treatment referred to in that sub-paragraph was carried out;
(iv)the total amount in tonnes of WEEE in respect of which evidence of reuse as a whole appliance has been issued by that AATF under these Regulations, [F3and]
(v)where sub-paragraph (iv) applies and the evidence relates to WEEE that has not been received at the premises of that AATF, the name and address of the reuse establishment or undertaking in receipt of that WEEE; F4...
F5(vi). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(b)in the case of an approved exporter, the total amount of WEEE in tonnes received and the total amount of WEEE in tonnes exported for reuse as a whole appliance, treatment, recovery or recycling F6...; and
(c)in relation to each scheme to whom an evidence note has been issued—
(i)the name of the scheme, and
(ii)the total tonnage of WEEE stated in all evidence notes issued to that scheme.
[F7(8A) Where paragraph (8)(a)(i), (ii) or (iv) or (8)(b) applies, details of the amounts in tonnes of WEEE must be provided by reference to each of the following categories—
(i)the categories listed in Schedule 3 (excluding display equipment, appliances containing refrigerants, gas discharge lamps, LED light sources and photovoltaic panels),
(ii)display equipment,
(iii)appliances containing refrigerants,
(iv)gas discharge lamps and LED light sources, and
(v)photovoltaic panels
and in the case of each category must specify the amount in tonnes of WEEE from private households, WEEE from users other than private households and from or on behalf of which scheme it was received.]
(9) In addition to the requirements in paragraph (8) the reports referred to in paragraph (1) [F1must] include details of the total amount in tonnes of non-obligated WEEE received by the AATF [F8or approved exporter and must also specify the total amount in tonnes of non-obligated WEEE received by the AATF that was retained by the operator of a designated collection facility under regulation 53, by reference to each of the following categories—
(i)the categories listed in Schedule 3 (excluding display equipment, appliances containing refrigerants, gas discharge lamps, LED light sources and photovoltaic panels),
(ii)display equipment,
(iii)appliances containing refrigerants,
(iv)gas discharge lamps and LED light sources, and
(v)photovoltaic panels]
(10) In addition to the requirements in paragraph (8), the report referred to in paragraph (1)(d) [F1must] include all of the information provided in the quarterly reports that relate to the relevant approval period.
[F9(11) The reports referred to in paragraph (1) must be either submitted in the format published by the appropriate authority under regulation 81(2) or online.]
Textual Amendments
F1Word in reg. 66 substituted (25.7.2014) by The Waste Electrical and Electronic Equipment and Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (Amendment) Regulations 2014 (S.I. 2014/1771), regs. 1(b), 3(2), Sch. 1 para. 27
F2Word in reg. 66(7) substituted (25.12.2015) by The Waste Electrical and Electronic Equipment (Amendment) Regulations 2015 (S.I. 2015/1968), regs. 1, 2(33)(c)
F3Word in reg. 66(8)(a)(iv) inserted (1.1.2019) by The Waste Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2018 (S.I. 2018/1214), regs. 1, 22(1)(a)
F4Word in reg. 66(8)(a)(v) omitted (1.1.2019) by virtue of The Waste Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2018 (S.I. 2018/1214), regs. 1, 22(1)(b)
F5Reg. 66(8)(a)(vi) omitted (1.1.2019) by virtue of The Waste Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2018 (S.I. 2018/1214), regs. 1, 22(1)(c)
F6Words in reg. 66(8)(b) omitted (1.1.2019) by virtue of The Waste Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2018 (S.I. 2018/1214), regs. 1, 22(1)(d)
F7Reg. 66(8A) inserted (1.1.2019) by The Waste Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2018 (S.I. 2018/1214), regs. 1, 22(2)
F8Words in reg. 66(9) substituted (1.1.2019) by The Waste Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2018 (S.I. 2018/1214), regs. 1, 22(3)
F9Reg. 66(11) inserted (1.1.2019) by The Waste Electrical and Electronic Equipment (Amendment) (No. 2) Regulations 2018 (S.I. 2018/1214), regs. 1, 22(4)
Commencement Information
I1Reg. 66(1)-(5)(9)(10) in force at 1.1.2014, see reg. 1(2)
I2Reg. 66(6) in force at 1.1.2016, see reg. 1(3)
I3Reg. 66(7)(8) in force at 1.1.2019, see reg. 1(4)
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: