F1SCHEDULE 17CONFORMITY ASSESSMENT PROCEDURES
PART 1TYPE EXAMINATION (MODULE B)
3
The technical documentation referred to in paragraph 2(2)(c) must—
a
make it possible to assess the explosive's conformity with the applicable requirements of these Regulations and must include an adequate analysis and assessment of any risks;
b
specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the explosive;
c
contain, wherever applicable, at least the following elements—
i
a general description of the explosive;
ii
conceptual design and manufacturing drawings and schemes of components, sub-assemblies and circuits;
iii
descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the explosive;
iv
a list of the designated standards applied in full or in part (where applicable specifying the parts which have been applied);
v
where designated standards have not been applied, descriptions of the solutions adopted to meet the essential safety requirements, including a list of other relevant technical specifications applied to meet the essential safety requirements;
vi
the results of design calculations made and examinations carried out;
vii
test reports.
Schs. 17, 18 inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 35 (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)