Textual Amendments
F1Schs. 17, 18 inserted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 16 para. 35 (with Sch. 16 para. 29) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
3. The technical documentation referred to in paragraph 2(2)(c) must—U.K.
(a)make it possible to assess the explosive's conformity with the applicable requirements of these Regulations and must include an adequate analysis and assessment of any risks;
(b)specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the explosive;
(c)contain, wherever applicable, at least the following elements—
(i)a general description of the explosive;
(ii)conceptual design and manufacturing drawings and schemes of components, sub-assemblies and circuits;
(iii)descriptions and explanations necessary for the understanding of those drawings and schemes and the operation of the explosive;
(iv)a list of the designated standards applied in full or in part (where applicable specifying the parts which have been applied);
(v)where designated standards have not been applied, descriptions of the solutions adopted to meet the essential safety requirements, including a list of other relevant technical specifications applied to meet the essential safety requirements;
(vi)the results of design calculations made and examinations carried out;
(vii)test reports.]