Search Legislation

The Mines Regulations 2014

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes to legislation:

There are currently no known outstanding effects for the The Mines Regulations 2014, PART 10. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

PART 10E+W+STRANSITIONAL PROVISIONS, REPEALS, REVOCATIONS AND MODIFICATIONS

Transitional provisions: generalE+W+S

71.—(1) Where enforcement action has been initiated against an owner, manager or employer in relation to a mine by the Executive before the commencement date, that action continues as if the action had been commenced against the mine operator on that date.

(2) Any action taken by the Executive or an inspector with respect to a mine in relation to any of the relevant statutory provisions in force before the commencement date continues to have effect in relation to the mine operator so that it is the duty of the mine operator to carry out any remedial actions or operations that the owner, manager or principal employer of employees at the mine was under an obligation to carry out or achieve immediately before the commencement date.

(3) A document prepared by the owner, manager or an employer at a mine and sufficient for the purposes of the provision in column 1 of table 1 in force immediately before the commencement date may be relied upon by the mine operator as evidence that an assessment, process, procedure or scheme required by the corresponding provision of these Regulations in column 2 of table 1 has been made or is in place.

Table 1

Column 1Column 2
Regulation 11(2) of MASHAMregulation 15(1)(a)
Regulation 4(5)(a) of the Mines Miscellaneous Health and Safety Provisions Regulations 1995(1)regulation 20(1)
Regulation 5 of the Mines (Control of Ground Movement) Regulations 1999(2)regulation 32(3)
Regulation 6(5)(a) of the Mines (Precautions Against Inrushes) Regulations 1979(3)regulation 35(2)(a)
Section 37(1) of the 1954 Actregulation 42
Regulation 4(1) of the Coal Mines (Control of Inhalable Dust) Regulations 2007(4)regulation 45(2)
Regulation 27(1) of MASHAMregulation 58(1)
Regulation 10 of the 1971 Regulationsregulation 66(1)

(4) Where, immediately before the commencement date, anything is kept at a place other than a mine in accordance with the relevant statutory provisions, that place shall be deemed to be suitable for the purposes of these Regulations.

(5) In this regulation, references to enforcement action are to steps taken by an inspector under sections 20 to 22 and 25 of the 1974 Act in relation to a particular mine or to proceedings instituted under the 1974 Act in any court and requiring the owner, manager, employer or mine operator to do or not to do anything.

Commencement Information

I1Reg. 71 in force at 6.4.2015, see reg. 1(2)

Transitional provisions: tipsE+W+S

72.—(1) A mine operator must carry out by 5th April 2016 the first appraisal of a tip that, immediately before the commencement date, was not classified within the meaning of regulation 2(1) of the 1971 Regulations.

(2) Where, before the commencement date, a report has been obtained in accordance with regulation 9(2)(a), 12(1) or 18(1) of the 1971 Regulations and is less than two years old, that report—

(a)must be treated as a geotechnical assessment for the purpose of regulation 62; and

(b)remains valid for two years from the date on which it was made.

Commencement Information

I2Reg. 72 in force at 6.4.2015, see reg. 1(2)

Transitional provision: Winsford mineE+W+S

73.—(1) Where explosives were being stored below ground at Winsford mine in accordance with the Winsford Regulations immediately before the commencement date, the mine operator of that mine on the commencement date is deemed to hold a licence granted by the Executive under regulation 13 of the 2014 Regulations (the “deemed licence”).

(2) The requirements set out in regulations 4(2) to (4), 6, 7, 7(a) and 9(1) to (5) and (7) of the Winsford Regulations have effect as if they were conditions of the deemed licence and as if references to the mine manager in those regulations were references to the mine operator.

(3) The deemed licence remains in force until 6th April 2020 unless it is revoked before that date under regulation 23 of the 2014 Regulations.

(4) In this regulation—

(a)“Winsford mine” means the Winsford Rock Salt Mine, Winsford, Cheshire (formerly known as the Meadow Bank Mine); and

(b)“Winsford Regulations” means the Meadow Bank Mine (Explosives) Special Regulations 1963(5).

Commencement Information

I3Reg. 73 in force at 6.4.2015, see reg. 1(2)

Repeals and revocationsE+W+S

74.—(1) The provisions of the Acts specified in column 1 of Schedule 3 are repealed to the extent set out in the corresponding entry in column 2.

(2) The instruments specified in Part 1 of Schedule 4 are revoked in full.

(3) The instruments specified in column 1 of Part 2 of Schedule 4 are revoked to the extent specified in the corresponding entry in column 2.

Commencement Information

I4Reg. 74 in force at 6.4.2015, see reg. 1(2)

ModificationsE+W+S

75.  The modifications specified in Schedule 5 have effect.

Commencement Information

I5Reg. 75 in force at 6.4.2015, see reg. 1(2)

ReviewE+W+S

76.—(1) Before the end of the review period, the Secretary of State must—

(a)carry out a review of these Regulations;

(b)set out the conclusions of the review in a report; and

(c)publish the report.

(2) In carrying out the review, the Secretary of State must, so far as is reasonably practicable, have regard to how other member States have implemented Council Directive 1992/104/EEC(6) on the minimum requirements for improving the safety and health protection of workers in surface and underground mineral-extracting industries, which regulations 7, 9 to 17, 19, 20, 22, 23, 25, 26, 28, 29, 32 to 34, 37, 39, 41 to 43, 45 to 50, 53, 55 to 57, 59, 60 and 69 implement.

(3) The report must, in particular,—

(a)set out the objectives intended to be achieved by the regulatory system established by these Regulations;

(b)assess the extent to which those objectives are achieved; and

(c)assess whether those objectives remain appropriate and, if so, the extent to which they could be achieved with a system that imposes less regulation.

(4) In this regulation, “review period” means the period of five years beginning with the commencement date.

Commencement Information

I6Reg. 76 in force at 6.4.2015, see reg. 1(2)

(1)

S.I. 1995/2005. Regulation 4(5) was inserted by S.I. 1999/3242.

(5)

S.I. 1963/815, amended by S.I. 1974/2223. These are special regulations within the meaning of section 141(5) of the 1954 Act and therefore not subject to parliamentary control (section 174 of that Act). They are not published by HMSO. A copy of the Regulations is available from the Health and Safety Executive, Redgrave Court, Merton Road, Bootle, L20 7HS.

(6)

OJ No L 404, 31.12.92, p10.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources