- Latest available (Revised)
- Point in Time (01/09/2019)
- Original (As made)
Version Superseded: 01/04/2024
Point in time view as at 01/09/2019. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Single Source Contract Regulations 2014, Section 28.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
28.—(1) The primary contractor must provide a contract completion report within six months after the contract completion date of the qualifying defence contract.
(2) The report must contain the following information—
(a)a list of the key deliverables specified in the contract, with a brief description of each;
(b)the actual quantum of those deliverables, expressed using the output metrics set out in the most recent contract reporting plan;
(c)an annual profile (or, if the contractor is of the view that it is not possible to express these matters in an annual profile, the total amount) of the following matters—
(i)any risk contingency element included in the allowable costs;
(ii)any actual risk contingency element;
(iii)the maximum amount of profit that could have resulted from the incentive adjustment (step 5 of regulation 11) at the time of agreement;
(iv)the actual incentive adjustment;
(v)the planned amount of profit, excluding any amount resulting from the incentive adjustment; and
(vi)the actual amount of profit, excluding any amount resulting from the incentive adjustment;
(d)an annual profile of any estimated costs (split by the defined pricing structure) at the time of agreement;
(e)the total amount of those allowable costs (split by the defined pricing structure) that are non-recurring;
(f)an annual profile of the estimated amount of each cost recovery base set out in the contract reporting plan at the time of agreement;
(g)an annual profile of the actual costs (split by the defined pricing structure);
(h)an annual profile of the actual amount of each cost recovery base set out in the contract reporting plan;
(i)a quantified analysis of the causes of variance (explaining not less than 90% of the total variance) between any estimated costs used to determine the contract price and the total actual and forecast costs;
(j)a description of any event that has occurred, or circumstances which have arisen, since the contract was entered into, that have had or are likely to have a material effect in relation to the contract, including—
(i)the date on which the contractor became aware of the event or circumstances;
(ii)whether the event or circumstances were covered by any contingency element of the contract price; and
(iii)the effect that the event or circumstances have had on the costs already incurred or forecast to be incurred under the contract;
(k)a forecast of any TCIF adjustment or any final price adjustment (regulation 16) which the contractor expects will be made;
(l)a list of all payments exceeding £100,000 or 1% of the contract [F1price] (whichever is the greater) that have been or are expected to be made by the Secretary of State under the contract, including—
(i)the amount, or expected amount, of each payment;
(ii)the date on which each payment did, or is expected to, fall due; and
(iii)if the contract requires the payment to be made in any currency other than sterling, the currency in which the payment was or is to be made;
(m)if the contract requires payment to be made in sterling, an annual profile of all such payments made, or which the contractor expects the Secretary of State will make;
(n)if the contract requires payment to be made in any currency other than sterling, an annual profile for each such currency of all payments made, or which the contractor expects the Secretary of State will make;
(o)a list of—
(i)all delivery milestones set out in the contract;
(ii)where the contract sets an expected date for a delivery milestone to be completed, that date;
(iii)the actual or expected completion date for each delivery milestone; and
(iv)a description of the causes of any variance between the expected date for a delivery milestone set out in the contract, and the actual or expected completion date; and
(p)in relation to each sub-contract which the primary contractor has entered into for the purposes of enabling it to perform its obligations under the qualifying defence contract which has or is expected to have a value of not less than £1,000,000 F2...—
(i)if the sub-contractor is a registered company, its registered name and company number, and the address of its registered office;
(ii)if the sub-contractor is not a registered company, its name;
(iii)whether the sub-contractor is associated with the primary contractor;
(iv)whether the sub-contractor is an SME;
(v)a brief description of the goods, works or services provided under the sub-contract;
(vi)the date on which the sub-contract was entered into;
(vii)the contract completion date (or, if that date is not known, the expected contract completion date);
(viii)the (actual or estimated) price payable under the sub-contract; and
(ix)if an assessment has been made under regulation 61(1) or (4), the outcome of that assessment;
[F3(q)in relation to each sub-contract which the primary contractor has entered into, or intends to enter into, and which has or is expected to have a value of not less than £15,000,000, if the primary contractor has made an assessment that the contract would not be a qualifying sub-contract—
(i)the outcome of the negative assessment;
(ii)confirmation of whether the award of the contract is not, or would not be, the result of a competitive process; and
(iii)confirmation of whether the contract enables the performance of contracts other than a qualifying defence contract or qualifying sub-contract.]
Textual Amendments
F1Word in reg. 28(2)(l) substituted (1.9.2019) by The Single Source Contract (Amendment) Regulations 2019 (S.I. 2019/1106), regs. 1, 12(2)
F2Words in reg. 28(2)(p) omitted (1.9.2019) by virtue of The Single Source Contract (Amendment) Regulations 2019 (S.I. 2019/1106), regs. 1, 12(3)
F3Reg. 28(2)(q) inserted (1.9.2019) by The Single Source Contract (Amendment) Regulations 2019 (S.I. 2019/1106), regs. 1, 12(4)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: