- Latest available (Revised)
- Original (As made)
The Renewables Obligation Order 2015
You are here:
- UK Statutory Instruments
- 2015 No. 1947
- PART 2
- Article 13A
What Version
Advanced Features
- Show Geographical Extent(e.g. England, Wales, Scotland and Northern Ireland)
- Show Timeline of Changes
More Resources
Changes to legislation:
There are currently no known outstanding effects for the The Renewables Obligation Order 2015, Section 13A.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
[F1Determining the number of UK ROCs to be produced by a designated electricity supplier in order to discharge its renewables obligation: obligation periods beginning on or after 1st April 2019E+W
This section has no associated Explanatory Memorandum
13A.—(1) This article applies in respect of an obligation period beginning on or after 1st April 2019.
(2) Before the start of an obligation period to which this article applies, the Secretary of State must estimate, in megawatt hours, the total amount of EII excluded electricity likely to be supplied to customers in Great Britain during that period by designated electricity suppliers and electricity suppliers on whom the renewables obligation has been imposed by an order made under sections 32 to 32M of the Act by Scottish Ministers.
(3) [F2Subject to article 13C,] where the total obligation for the obligation period is calculation A, the number of UK ROCs that a designated electricity supplier is required to produce in order to discharge its renewables obligation is, for each megawatt hour of relevant electricity that it supplies during that period, equal to—
(4) [F3Subject to article 13C,] where the total obligation for the obligation period is calculation B, the number of UK ROCs that a designated electricity supplier is required to produce in order to discharge its renewables obligation is, for each megawatt hour of relevant electricity that it supplies during that period, equal to—
(5) For the purposes of paragraphs (3) and (4)—
(a)C is the estimate made by the Secretary of State under article 8(1) of the total amount of electricity likely to be supplied to customers in Great Britain during the obligation period;
(b)D is the estimate made by the Secretary of State under paragraph (2) of the total amount of EII excluded electricity likely to be supplied to customers in Great Britain during the obligation period; and
(c)E is equal to—
(6) The Secretary of State must publish, by the 1st October preceding the obligation period, the number of UK ROCs that a designated electricity supplier is required to produce in respect of each megawatt hour of relevant electricity that it supplies during that period in order to discharge its renewables obligation for that period.]
Textual Amendments
F1Arts. 13A, 13B inserted (15.12.2017) by The Renewables Obligation (Amendment) (Energy Intensive Industries) Order 2017 (S.I. 2017/1289), arts. 1(1), 8
F2Words in art. 13A(3) inserted (21.3.2024) by The Renewables Obligation (Amendment) (Energy Intensive Industries) Order 2024 (S.I. 2024/403), arts. 1(1), 2(3)
F3Words in art. 13A(4) inserted (21.3.2024) by The Renewables Obligation (Amendment) (Energy Intensive Industries) Order 2024 (S.I. 2024/403), arts. 1(1), 2(4)
Options/Help
Print Options
PrintThe Whole Instrument
PrintThe Whole Part
PrintThis Section only
Legislation is available in different versions:
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
See additional information alongside the content
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Opening Options
Different options to open legislation in order to view more content on screen at once
Explanatory Memorandum
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
More Resources
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as enacted version that was used for the print copy
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- correction slips
- links to related legislation and further information resources
Impact Assessments
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
- Why the government is proposing to intervene;
- The main options the government is considering, and which one is preferred;
- How and to what extent new policies may impact on them; and,
- The estimated costs and benefits of proposed measures.
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
More Resources
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
- the original print PDF of the as made version that was used for the print copy
- correction slips
Click 'View More' or select 'More Resources' tab for additional information including:
- lists of changes made by and/or affecting this legislation item
- confers power and blanket amendment details
- all formats of all associated documents
- links to related legislation and further information resources
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.