- Latest available (Revised)
- Point in Time (20/07/2018)
- Original (As made)
Point in time view as at 20/07/2018.
There are currently no known outstanding effects for the The Renewables Obligation Order 2015, Section 32.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
32.—(1) References in this Part to a way of generating electricity are references to—
(a)one of the ways of generating electricity described in the first column of Parts 2, 3 or 5 of Schedule 5;
(b)generating electricity in the way described in article 36(1)(c);
(c)generating electricity in the way described in article 36(1)(c) and (3)(b);
(d)generating electricity from renewable sources in a way not falling within sub-paragraph (a), (b) or (c).
(2) Paragraph (3) applies for the purposes of this Part.
(3) Where during any month the RO eligible renewable output of a generating station is generated in two or more ways, the proportion of the station's RO eligible renewable output which is generated in each of those ways is—
(a)in the case of electricity generated in a way that does not use fuel,
(b)in the case of electricity generated using mixed gas in the way described as “AD” in Schedule 5,
(c)in the case of electricity generated using mixed gas in the way described as “electricity generated from sewage gas” in Schedule 5,
(d)in the case of electricity generated in a way not falling within sub-paragraph (a), (b) or (c),
(4) In paragraph (3)—
(a)B is the total installed capacity of the RO capacity of the station in that month;
(b)C is the maximum capacity in that month at which the station could generate electricity—
(i)in the way in question,
(ii)using RO capacity, and
(iii)for a sustained period without causing damage to the station (assuming the source of power used by the station to generate electricity was available to it without interruption);
(c)D is the maximum capacity in that month at which the station could generate electricity—
(i)from fuel,
(ii)using RO capacity, and
(iii)for a sustained period without causing damage to the station (assuming the fuel used by the station to generate electricity was available to it without interruption);
(d)E is the energy content of the mixed gas used in generating the station's RO output electricity during that month less the energy content of any fossil fuel from which the mixed gas is in part composed;
(e)F is the energy content of all of the renewable sources used in generating the station's RO output electricity during that month less the energy content of any fossil fuel from which those renewable sources are in part composed;
(f)G is the dry mass of—
(i)any renewable waste (other than sewage), and
(ii)any biomass (other than sewage or renewable waste),
from which the mixed gas used in generating the station's RO output electricity during that month is formed, less the dry mass of any digestible fossil fuel from which that waste or biomass is in part composed;
(g)H is the dry mass of all of the material from which the mixed gas used in generating the station's RO output electricity during that month is formed, less the dry mass of any digestible fossil fuel from which that material is in part composed;
(h)I is the dry mass of the sewage from which the mixed gas used in generating the station's RO output electricity during that month is formed; and
(i)J is the energy content of the renewable sources used in generating the station's RO output electricity in the way in question during that month less the energy content of any fossil fuel from which those renewable sources are in part composed.
(5) For the purposes of paragraphs (3) and (4)(c), electricity generated in the way described as “landfill gas heat recovery” in Schedule 5 is to be regarded as not generated from fuel.
(6) In this article—
“dry mass”, in relation to a fuel, means the mass of the fuel when any water present in it has been removed; and
“mixed gas” means gas formed by the anaerobic digestion of sewage together with—
renewable waste (other than sewage), or
biomass (other than sewage).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: