- Latest available (Revised)
- Point in Time (15/12/2017)
- Original (As made)
Version Superseded: 01/01/2018
Point in time view as at 15/12/2017.
There are currently no known outstanding effects for the The Renewables Obligation Order 2015, SCHEDULE 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Article 2(1)
1. In this Schedule—
“actual value method” means the calculation method for greenhouse gas emissions from the production and use of bioliquids provided for in paragraphs 1, 2 and 5 to 18 of Part C of Annex 5 to the Renewables Directive;
“default percentage” means—
in relation to bioliquid described in the first column of Part A or Part B of Annex 5 to the Renewables Directive—
the percentage (if any) which corresponds to that description in the third column of Part A or Part B of that Annex, or
where a percentage corresponding to that description is not set out in the third column of Part A or Part B of that Annex, the percentage which complies with the provision corresponding to that description in the second column of Part A or Part B of that Annex,
in all other cases 0%;
“disaggregated default value” means, in relation to a bioliquid described in the first column of a table in Part D or Part E of Annex 5 to the Renewables Directive, the value which corresponds to that description in the third column of that table in Part D or Part E of that Annex;
“disaggregated default values for cultivation” means the figures in the third column of the table entitled “Disaggregated default values for cultivation: ‘eec’ as defined in part C of this Annex” in Part D of Annex 5 to the Renewables Directive;
“greenhouse gas emissions from the use of fossil fuel” means the value given in paragraph 19 of Part C of Annex 5 to the Renewables Directive as the fossil fuel comparator for bioliquids used for electricity production;
“mixed value method” means the calculation method for greenhouse gas emissions from the production and use of bioliquids provided for in paragraphs 1, 2 and 5 to 18 of Part C of Annex 5 to the Renewables Directive, but using one or more disaggregated default values for the bioliquid when carrying out the calculation set out in paragraph 1 of Part C of that Annex; and
“relevant percentage” means—
in relation to bioliquid used to generate electricity before 1st January 2017, 35%;
in relation to bioliquid used to generate electricity during 2017, 50%;
in relation to bioliquid produced by an installation that started producing bioliquid before 1st January 2017 and used to generate electricity on or after 1st January 2018, 50%;
in all other cases, 60%.
2. Bioliquid meets the greenhouse gas criteria if the greenhouse gas emissions from its use are lower, by at least the relevant percentage, than the greenhouse gas emissions from the use of fossil fuel.
3. For the purposes of paragraph 2, and subject to paragraphs 4 to 6, the percentage difference between the greenhouse gas emissions from the use of the bioliquid and the greenhouse gas emissions from the use of fossil fuel—
(a)is to be calculated by the operator of the generating station using the actual value method, or the mixed value method, or
(b)when not so calculated, is equal to the default percentage.
4. The mixed value method must not be used for the purposes of paragraph 2 unless the bioliquid is described in the first column of a table in Part D or Part E of Annex 5 to the Renewables Directive.E+W
5. Where the mixed value method is used for the purposes of paragraph 2, the disaggregated default values for cultivation must not be used in carrying out the calculation in paragraph 1 of Part C of Annex 5 to the Renewables Directive unless the biomaterial from which the bioliquid is made—E+W
(a)was cultivated outside the EU,
(b)was cultivated in an area included in a list submitted under Article 19(2) of the Renewables Directive,
(c)is waste, or
(d)is residue (other than residue from agriculture, aquaculture or fisheries).
6. The default percentage must not be used in relation to bioliquid described in the first column of Part A or Part B of Annex 5 to the Renewables Directive unless—E+W
(a)in relation to the bioliquid, the result of the calculation in paragraph 7 of Part C of Annex 5 to the Renewables Directive is equal to, or less than, zero; and
(b)in the case of a bioliquid described in the first column of Part A of Annex 5 to the Renewables Directive, the biomaterial from which the bioliquid is made—
(i)was cultivated outside the EU,
(ii)was cultivated in an area included in a list submitted under Article 19(2) of the Renewables Directive,
(iii)is waste, or
(iv)is residue (other than residue from agriculture, aquaculture or fisheries).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: