The Wireless Telegraphy (Ultra-Wideband Equipment) (Exemption) Regulations 2015

Terms, provisions and limitationsU.K.

30.—(1) The exemption provided for in regulation 29 shall apply to ultra-wideband equipment which is a building material analysis device and which complies with the requirements of paragraphs (2) to (4) of this regulation.

(2) The ultra-wideband equipment must—

(a)only have the transmitter turned on if manually operated with a non-locking switch;

(b)be used in close proximity to the material being analysed with the emissions being directed into the direction of the object of the analysis; and

(c)switch off automatically after ten seconds without any movement.

(3) The ultra-wideband equipment must not cause or contribute to undue interference to other users of the electromagnetic spectrum.

(4) The ultra-wideband equipment must only emit signals that are radiated into the air which—

(a)are kept to a minimum; and

(b)if the equipment were to be placed on a representative wall (as defined within Annex D of harmonised standard EN 302-435-1(1)) would be in accordance with the condition in regulation 31.

Commencement Information

I1Reg. 30 in force at 25.3.2015, see reg. 1

(1)

EN 302 435-1 (Version 1.3.1) published in December 2009.