Print Options
PrintThe Whole
Instrument
PrintThe Whole
Part
PrintThis
Section
only
Changes over time for: Section 40
Timeline of Changes
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Status:
Point in time view as at 08/12/2016.
Changes to legislation:
There are currently no known outstanding effects for the The Electromagnetic Compatibility Regulations 2016, Section 40.
Changes to Legislation
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Conformity assessment proceduresU.K.
This section has no associated Explanatory Memorandum
40.—(1) Subject to paragraph (2), the manufacturer must demonstrate the conformity of the apparatus with the essential requirements by means of either—
(a)the procedure set out in Schedule 2 (Module A: internal production control); or
(b)the procedures set out in Schedule 3 (Module B: EU type examination followed by Module C: conformity to type based on internal production control).
(2) The manufacturer may choose to demonstrate the conformity of apparatus with some of the essential requirements by following the procedure referred to in paragraph (1)(b) provided that the procedure referred to in paragraph (1)(a) is followed for the remaining essential requirements.
Back to top