- Latest available (Revised)
- Point in Time (01/10/2018)
- Original (As made)
Version Superseded: 31/12/2020
Point in time view as at 01/10/2018. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Simple Pressure Vessels (Safety) Regulations 2016, Section 62.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
62.—(1) Where an enforcing authority makes one of the following findings in relation to a vessel, it must require a relevant economic operator to remedy the non-compliance concerned within such reasonable period as the enforcing authority specifies—
(a)in relation to a category A vessel—
(i)no CE marking has been affixed;
(ii)the CE marking has been affixed otherwise than in accordance with regulation 6 (EU declaration of conformity, CE marking and inscriptions for category A vessels) or 38 (prohibition on improper use of CE marking);
(iii)where a notified body is involved in the production control phase for the vessel—
(aa)no identification number in respect of the notified body has been affixed; or
(bb)an identification number in respect of the notified body has been affixed otherwise than in accordance with regulation 44 (identification number);
(iv)the EU declaration of conformity has not been drawn up or has been drawn up otherwise than in accordance with regulations 6 (EU declaration of conformity, CE marking and inscriptions for category A vessels) or 43 (EU declaration of conformity);
(v)the technical documentation is unavailable or incomplete;
(b)in relation to a category A or a category B vessel—
(i)an inscription has not been affixed or has been affixed otherwise than in accordance with regulation 6 (EU declaration of conformity, CE marking and inscriptions for category A vessels) or 7 (inscriptions for category B vessels);
(ii)the information specified in regulation 11 (labelling of vessels) or 21 (information identifying importer) is absent, false or incomplete;
(iii)any other administrative requirement imposed on the manufacturer or importer under Part 2 has not been fulfilled.
(2) The enforcing authority must not take any enforcement action against the relevant economic operator under these Regulations in respect of the non-compliance concerned until the period referred to in paragraph (1) has elapsed.
(3) Where the non-compliance referred to in paragraph (1) persists, the enforcing authority must take all appropriate measures to—
(a)restrict or prohibit the vessel being made available on the market;
(b)ensure that the vessel is withdrawn; or
(c)ensure that the vessel is recalled.
(4) Nothing in this regulation is to prevent an enforcing authority from taking action under regulations 59 (enforcement action in respect of vessels which are not in conformity) or 60(3) (EU safeguard procedure).
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: