The Simple Pressure Vessels (Safety) Regulations 2016

Manufacturing E+W+S

15.—(1) The manufacturer must take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured vessels with the type described in the [F1 Type] examination certificate and with the applicable requirements of these Regulations.

(2) Before commencing manufacture, the manufacturer must provide [F2 an approved] body of his choice with all necessary information, and in particular—

(a) the technical documentation referred to in paragraph 2(2)(c), together with —

(i) the certificates relating to the suitable qualification of the welding operations and of the welders or welding operators;

(ii) the inspection slip for the materials used in the manufacture of parts and components contributing to the strength of the vessel; and

(iii) a report on the examination and tests performed;

(b) the [F1 Type] examination certificate;

(c) a document describing the manufacturing processes and all of the predetermined systematic measures taken to ensure conformity of the vessels with the type described in the [F1 Type] examination certificate, which document must include—

(i) a description of the means of manufacture and checking appropriate to the construction of the vessels;

(ii) an inspection document describing the appropriate examinations and tests to be carried out during manufacture, together with the procedures in respect thereof and the frequency with which they are to be performed;

(iii) an undertaking to carry out the examinations and tests in accordance with the inspection document and to ensure that a hydrostatic test or, subject to the agreement of the relevant authorities, a pneumatic test is carried out on each vessel manufactured at a test pressure equal to 1.5 times the design pressure; and

(iv) the addresses of the places of manufacture and storage and the date on which manufacture is to commence.

(3) The examinations and tests referred to in paragraph 15(2)(c)(iii) must be—

(i) carried out under the responsibility of qualified staff who are independent of production personnel; and

(ii) the subject of a report.

(4) The [F3 approved] body must, before the date on which any manufacture begins, examine the documents referred to in paragraphs 15(2)(a) and (c) in order to certify their conformity with the [F1 Type] examination certificate.

Extent Information

E1 This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

F1 Word in Sch. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 21 para. 40(e) (with Sch. 21 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F2 Words in Sch. 2 para. 15(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 21 para. 40(b) (with Sch. 21 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F3 Words in Sch. 2 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 21 para. 40(c) (with Sch. 21 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Manufacturing N.I.

15.—(1) The manufacturer must take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured vessels with the type described in the EU-type examination certificate and with the applicable requirements of these Regulations.

(2) Before commencing manufacture, the manufacturer must provide a notified body of his choice with all necessary information, and in particular—

(a) the technical documentation referred to in paragraph 2(2)(c), together with —

(i) the certificates relating to the suitable qualification of the welding operations and of the welders or welding operators;

(ii) the inspection slip for the materials used in the manufacture of parts and components contributing to the strength of the vessel; and

(iii) a report on the examination and tests performed;

(b) the EU-type examination certificate;

(c) a document describing the manufacturing processes and all of the predetermined systematic measures taken to ensure conformity of the vessels with the type described in the EU-type examination certificate, which document must include—

(i) a description of the means of manufacture and checking appropriate to the construction of the vessels;

(ii) an inspection document describing the appropriate examinations and tests to be carried out during manufacture, together with the procedures in respect thereof and the frequency with which they are to be performed;

(iii) an undertaking to carry out the examinations and tests in accordance with the inspection document and to ensure that a hydrostatic test or, subject to the agreement of the relevant authorities, a pneumatic test is carried out on each vessel manufactured at a test pressure equal to 1.5 times the design pressure; and

(iv) the addresses of the places of manufacture and storage and the date on which manufacture is to commence.

(3) The examinations and tests referred to in paragraph 15(2)(c)(iii) must be—

(i) carried out under the responsibility of qualified staff who are independent of production personnel; and

(ii) the subject of a report.

(4) The notified body must, before the date on which any manufacture begins, examine the documents referred to in paragraphs 15(2)(a) and (c) in order to certify their conformity with the EU-type examination certificate.

Extent Information

E2 This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only