The Lifts Regulations 2016

Technical documentation and conformity assessmentE+W+S

16.  Before placing a safety component for lifts on the market, a manufacturer must—

(a)have a relevant conformity assessment procedure carried out; and

(b)draw up the technical documentation referred to—

(i)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(a) or 48(b) is being carried out, in point 3 of Part A of Module B in [F1Schedule 11];

(ii)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(c) is being carried out, in point 3.1(d) of Module H in [F2Schedule 14].

Extent Information

E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Technical documentation and conformity assessmentN.I.

16.  Before placing a safety component for lifts on the market, a manufacturer must—

(a)have a relevant conformity assessment procedure carried out; and

(b)draw up the technical documentation referred to—

(i)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(a) or 48(b) is being carried out, in point 3 of Part A of Module B in Annex IV to the Directive (as amended from time to time);

(ii)for a safety component for lifts in respect of which the conformity assessment procedure in regulation 48(c) is being carried out, in point 3.1(d) of Module H in Annex VII to the Directive (as amended from time to time).

Extent Information

E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only