The Electrical Equipment (Safety) Regulations 2016 No. 1101

Regulation 38

SCHEDULE 8 U.K. [F1 EU] Declaration of Conformity

Textual Amendments

F1 Word in Sch. 8 heading omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 32(a) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

[F2 Declaration] of conformity (No xxxx) M1 E+W+S

1.  Product model (product, type, batch or serial number):

Extent Information

E1 This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

F2 Word in Sch. 8 para. 1 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 32(b) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Marginal Citations

M1 It is optional for the manufacturer to assign a number to the declaration of conformity.

EU declaration of conformity (No xxxx) F5 N.I.

1.  Product model (product, type, batch or serial number):

Extent Information

E4 This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

F5 It is optional for the manufacturer to assign a number to the declaration of conformity.

2.  Name and address of manufacturer or his authorised representative: U.K.

3.  This declaration of conformity is issued under the sole responsibility of the manufacturer. U.K.

4.  Object of the declaration (identification of electrical equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the electrical equipment): U.K.

5.  The object of the declaration described above is in conformity with the relevant [F3 statutory requirements]: E+W+S

Extent Information

E2 This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

F3 Words in Sch. 8 para. 5 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 32(c) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

5.  The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: N.I.

Extent Information

E5 This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

6.  References to the relevant [F4 designated] standards used or references to the other technical specifications in relation to which conformity is declared: E+W+S

Extent Information

E3 This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

F4 Word in Sch. 8 para. 6 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 23 para. 32(d) (with Sch. 23 para. 30) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

6.  References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared: N.I.

Extent Information

E6 This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

7.  Additional information: U.K.

• Signed for and on behalf of:

• (place and date of issue):

• (name, function) (signature):