- Latest available (Revised)
- Point in Time (08/12/2016)
- Original (As made)
Version Superseded: 31/12/2020
Point in time view as at 08/12/2016. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 2016, Section 2 is up to date with all changes known to be in force on or before 17 August 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Changes and effects yet to be applied by the editorial team are only applicable when viewing the latest version or prospective version of legislation. They are therefore not accessible when viewing legislation as at a specific point in time. To view the ‘Changes to Legislation’ information for this provision return to the latest version view using the options provided in the ‘What Version’ box above.
2.—(1) In these Regulations—
the “1974 Act” means the Health and Safety at Work etc Act 1974(1);
the “1994 Directive” means Directive 94/9/EC of the European Parliament and of the Council on the approximation of the laws of the member States concerning equipment and protective systems intended for use in potentially explosive atmospheres(2);
“the 1996 Regulations” means the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 1996(3);
“accreditation certificate” means a certificate, issued by the United Kingdom Accreditation Service (a company limited by guarantee incorporated in England and Wales under number 03076190) or a national accreditation body in another Member State or Northern Ireland, attesting that a conformity assessment body meets the notified body requirements;
“ATEX Directive” means Directive 2014/34/EU of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)(4);
“attestation of conformity” means a declaration of conformity required to be drawn up in accordance with regulation 7(3) (EU declaration of conformity and CE Marking);
“authorised representative” means a person appointed in accordance with regulation 17(1);
“CE marking” means a marking which takes the form set out in Annex II of RAMS (as amended from time to time);
“competent national authority” means an authority having responsibility for enforcing the law of a Member State which implements the ATEX Directive;
“component” means any item essential to the safe functioning of equipment and protective systems but with no autonomous function;
“conformity assessment” means the process demonstrating whether the essential health and safety requirements relating to a product have been fulfilled;
“conformity assessment body” means a person that performs conformity assessment activities, including calibration, testing, certification and inspection;
“distributor” means any person in the supply chain, other than the manufacturer or the importer, who makes a product available on the market;
“economic operator” means a manufacturer, authorised representative, importer or distributor;
“equipment” means machines, apparatus, fixed or mobile devices, control components and their instrumentation and detection or prevention systems which, separately or jointly, are intended for the generation, transfer, storage, measurement, control and conversion of energy or the processing of material or both and which are capable of causing an explosion through their own potential sources of ignition;
“equipment category” means the classification of equipment, within each equipment-group, specified in Annex I of the ATEX Directive (as amended from time to time), determining the requisite level of protection to be ensured;
“equipment-group I” means equipment intended for use in underground parts of mines, and in those parts of surface installations of such mines, liable to be endangered by firedamp or combustible dust or both, comprising equipment categories M 1 and M 2 as set out in Annex I of the ATEX Directive (as amended from time to time);
“equipment-group II” means equipment intended for use in other places liable to be endangered by explosive atmospheres, comprising equipment categories 1, 2 and 3 as set out in Annex I of the ATEX Directive (as amended from time to time);
“essential health and safety requirements” means the requirements set out in Schedule 1 (essential health and safety requirements);
“EU declaration of conformity” means a declaration of conformity required to be drawn up in accordance with regulation 7(1)(a) (EU declaration of conformity and CE marking);
“European Commission” means the Commission of the European Union;
“explosive atmosphere” means a mixture with air, under atmospheric conditions, of flammable substances in the form of gases, vapours, mists or dusts in which, after ignition has occurred, combustion spreads to the entire unburned mixture;
“harmonised standard” has the meaning set out in point 1(c) of Article 2 of Regulation (EU) 1025/2012 of the European Parliament and of the Council on European standardisation(5) (as amended from time to time);
“importer” means any person who—
is established within the EU, and
places a product from a third country on the EU market;
“intended use” means the use of a product prescribed by the manufacturer by assigning the equipment to a particular equipment-group and category or by providing all the information which is required for the safe functioning of a protective system, device or component;
“make available on the market” means any supply of a product for distribution, consumption or use on the EU market in the course of a commercial activity, whether in return for payment or free of charge, and related expressions are to be construed accordingly;
“manufacturer” means a person who—
manufactures a product, or has a product designed or manufactured, and
markets that product—
under that person’s name or trade mark, or
uses such product for that person’s own purposes;
“market surveillance authority” has the meaning set out in regulation 51 (designation of market surveillance authority);
“national accreditation body” has the meaning set out in point 11 of Article 2 of RAMS (as amended from time to time);
“notified body requirements” means the requirements set out in Schedule 2 (notified body requirements);
“Official Journal” means the Official Journal of the European Union;
“place on the market” means make a product available on the EU market for the first time, and related expressions are to be construed accordingly;
“potentially explosive atmosphere” means an atmosphere which could become explosive due to local and operational conditions;
“protective systems” means devices other than components of equipment which are intended to halt incipient explosions immediately or to limit the effective range of an explosion or both, and which are separately made available on the market for use as autonomous systems;
“putting into service” means the first use of a product by an end-user within the EU market, for the purposes for which it was intended, and related expressions are to be construed accordingly;
“RAMS” means Regulation (EC) 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93(6);
“recall” means taking any measure aimed at achieving the return of a product that has already been made available to the end-user and related expressions must be construed accordingly;
“relevant conformity assessment procedure” means a conformity assessment procedure referred to in regulation 39 (conformity assessment procedures);
“relevant economic operator” means, in relation to a product, an economic operator with obligations in respect of that product under Part 2;
“technical documentation” has the meaning given in regulation 6 (technical documentation and conformity assessment);
“technical specification” means a document that prescribes technical requirements to be fulfilled by a product;
“withdraw” when used in relation to a product, means taking any measure aimed at preventing a product in the supply chain from being made available on the market and related expressions must be construed accordingly.
(2) In these Regulations, a reference to a product being “in conformity with Part 2” means that—
(a)the product is in conformity with the essential health and safety requirements; and
(b)each relevant economic operator has complied with the obligations imposed on them under Part 2 which must be satisfied at or before the time at which they make the product available on the market.
(3) In these Regulations (except in Part 4 (notification of conformity assessment bodies) and Schedules 2 (notified body requirements) and 3 (operational obligations of notified bodies))“notified body” means—
(a)a notified body within the meaning set out in regulation 42 (notified bodies), or
(b)a notified body under the laws of any other member State which implement the Directive.
(4) In regulations 10(1) and 24(1) (monitoring) and Schedule 1 (essential health and safety requirements), “risk” means a risk which could arise from lawful and readily predictable human behaviour.
(5) In the other provisions of these Regulations, “risk” means a risk—
(a)which could arise from lawful and readily predictable human behaviour, and
(b)which may result in harm to any of the following interests—
(i)health and safety of persons, in particular workers,
(ii)domestic animals, or
(iii)property.
(6) In these Regulations, a reference to a Member State is to be read as a reference to an EEA State and references to the EU are to be read as references to the European Economic Area.
Commencement Information
I1Reg. 2 in force at 8.12.2016, see reg. 1(1)
OJ L 100, 19.4.1994, p.1.
S.I. 1996/192; amended by S.I. 1998/81, S.I. 2001/3766, S.I. 2005/830, S.I. 2011/1043, S.I. 2012/1809, S.I. 2014/469 and S.I. 2014/3248.
OJ L 96, 29.3.2014, p. 309.
OJ L 316, 14.11.2012, p. 12.
OJ L 218, 13.8.2008, p. 30.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: