The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 2016 No. 1107

PART 2 E+W+S Obligations of economic operators

Chapter 1 E+W+S Manufacturers

Technical documentation and conformity assessment E+W+S

6.  Before placing a product on the market or using it for their own purposes, a manufacturer must—

(a) carry out the relevant conformity assessment procedure or have a relevant conformity assessment procedure carried out; and

[F1 (b) draw up the technical documentation referred to—

(i) for a product in respect of which the conformity assessment procedure in regulation 39(1)(a) is being carried out, in paragraph 3(c) of Part 1 of Schedule 3A to these Regulations;

(ii) for a product in respect of which the conformity assessment procedure in regulation 39(1)(b) is being carried out, in paragraph 3(c) of Part 1 of Schedule 3A to these Regulations;

(iii) for a product in respect of which the conformity assessment procedure in regulation 39(1)(c) is being carried out, in paragraph 2 of Part 6 of Schedule 3A to these Regulations;

(iv) for a product in respect of which the conformity assessment procedure in regulation 39(1)(d) is being carried out, in paragraph 2 of Part 7 of Schedule 3A to these Regulations.]

Textual Amendments

F1 Reg. 6(b) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 25 para. 5 (with Sch. 25 para. 34) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Commencement Information

I1 Reg. 6 in force at 8.12.2016, see reg. 1(1)