5.—(1) This Chapter applies in relation to the placing on the market of a regulated non-automatic weighing instrument by a manufacturer.
(2) The obligations in this Chapter also apply to an importer or distributor who—
(a)places a regulated non-automatic weighing instrument on the market under the name or trade mark of that importer or distributor; or
(b)modifies a regulated non-automatic weighing instrument already placed on the market in such a way that compliance with these Regulations may be affected,
and the expression “manufacturer” is to be construed accordingly.
6.—[F1(1)] A manufacturer must not place on the market a regulated non-automatic weighing instrument unless the manufacturer has—
(a)designed and manufactured the instrument in accordance with the essential requirements;
(b)drawn up technical documentation in relation to the instrument;
(c)carried out (or procured the carrying out of) the relevant conformity assessment procedure which has demonstrated compliance of the instrument with the applicable requirements;
(d)drawn up [F2a] declaration of conformity; and
(e)affixed to the instrument [F3or where paragraph (2) applies, in respect of the UK marking, to a label affixed to a product or to a document accompanying the product] —
(i)the [F4UK] marking; and
(ii)the M marking.
[F5(2) For a period of [F636 months] beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the instrument; or
(b)to a document accompanying the instrument.]
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Reg. 6 renumbered as reg. 6(1) (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(a) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F2Word in reg. 6(1)(d) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(b) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F3Words in reg. 6(1)(e) inserted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(c)(i) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F4Word in reg. 6(1)(e) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(c)(ii) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(3))
F5Reg. 6(2) inserted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 6(d) (as substituted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460)), reg. 1(4), Sch. 3 para. 18(3))
F6Words in reg. 6(2) substituted (E.W.S.) (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 8, Sch. 2 para. (o)
6. A manufacturer must not place on the market a regulated non-automatic weighing instrument unless the manufacturer has—
(a)designed and manufactured the instrument in accordance with the essential requirements;
(b)drawn up technical documentation in relation to the instrument;
(c)carried out (or procured the carrying out of) the relevant conformity assessment procedure which has demonstrated compliance of the instrument with the applicable requirements;
(d)drawn up an EU declaration of conformity; and
(e)affixed to the instrument—
(i)the CE marking; and
(ii)the M marking.
Extent Information
E11This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
7. A manufacturer must keep the technical documentation and the [F7EU] declaration of conformity for a period of 10 years beginning with the day after the day on which the regulated non-automatic weighing instrument to which it relates has been placed on the market.
Textual Amendments
F7Word in reg. 7 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 7 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
8.—(1) Manufacturers must have procedures in place for series production of regulated non-automatic weighing instruments by them to ensure that instruments so manufactured continue to meet the essential requirements.
(2) These procedures must adequately take into account changes in—
(a)regulated non-automatic weighing instrument design or characteristics; and
(b)changes in the [F8designated] standards or in other technical specifications by reference to which the conformity of the regulated non-automatic weighing instrument is declared.
(3) When deemed appropriate with regard to the risks presented by the use of a regulated non-automatic weighing instrument, a manufacturer must—
(a)carry out sample testing of regulated non-automatic weighing instruments made available by the manufacturer on the market;
(b)investigate complaints about regulated non-automatic weighing instruments made available by the manufacturer on the market;
(c)if necessary, keep a register of—
(i)such complaints;
(ii)non-conforming regulated non-automatic weighing instruments; and
(iii)regulated non-automatic weighing instrument recalls; and
(d)keep distributors informed of any monitoring action the manufacturer has undertaken.
Extent Information
E2This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F8Word in reg. 8(2)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 8 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
8.—(1) Manufacturers must have procedures in place for series production of regulated non-automatic weighing instruments by them to ensure that instruments so manufactured continue to meet the essential requirements.
(2) These procedures must adequately take into account changes in—
(a)regulated non-automatic weighing instrument design or characteristics; and
(b)changes in the harmonised standards or in other technical specifications by reference to which the conformity of the regulated non-automatic weighing instrument is declared.
(3) When deemed appropriate with regard to the risks presented by the use of a regulated non-automatic weighing instrument, a manufacturer must—
(a)carry out sample testing of regulated non-automatic weighing instruments made available by the manufacturer on the market;
(b)investigate complaints about regulated non-automatic weighing instruments made available by the manufacturer on the market;
(c)if necessary, keep a register of—
(i)such complaints;
(ii)non-conforming regulated non-automatic weighing instruments; and
(iii)regulated non-automatic weighing instrument recalls; and
(d)keep distributors informed of any monitoring action the manufacturer has undertaken.
Extent Information
E12This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
9.—(1) A manufacturer must ensure that a regulated non-automatic weighing instrument, which that manufacturer has placed on the market, bears a type, batch, serial number or other element allowing identification of the instrument.
(2) A manufacturer must ensure that a regulated non-automatic weighing instrument is marked with the information specified in Schedule 1 (information to be marked on regulated non-automatic weighing instruments) and in the manner required by that Schedule.
(3) Where a regulated non-automatic measuring instruments includes or is attached to devices which are not used or intended to be used for any of the purposes listed in regulation 3(2), the manufacturer must affix to those devices a symbol constituted by a capital letter (M) printed in black on a red background at least 25mm x 25mm square with two intersecting diagonals forming a cross.
(4) The symbol referred to in paragraph (3) must be affixed in a clearly visible and indelible form.
10.—(1) A manufacturer must indicate on every regulated non-automatic weighing instruments manufactured by that manufacturer, the manufacturer's name, registered trade name or registered trade mark and the postal address at which the manufacturer can be contacted.
(2) The address required by these Regulations must indicate a single point at which the manufacturer can be contacted.
(3) The contact details required by this regulation must be [F9clear, legible and in easily understandable] English.
Extent Information
E3This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F9Words in reg. 10(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 9 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
10.—(1) A manufacturer must indicate on every regulated non-automatic weighing instruments manufactured by that manufacturer, the manufacturer's name, registered trade name or registered trade mark and the postal address at which the manufacturer can be contacted.
(2) The address required by these Regulations must indicate a single point at which the manufacturer can be contacted.
(3) The contact details required by this regulation must be in a language that is easily understood by end-users and market surveillance authorities and in the case of regulated non-automatic weighing instruments made available in [F34Northern Ireland], they must be in English.
Extent Information
E13This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F34Words in reg. 10(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
11.—(1) A manufacturer must ensure that regulated non-automatic weighing instruments manufactured by that manufacturer are accompanied by instructions and information easily understood by end-users.
F10(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(3) Such instructions and information and any labelling relating to a regulated non-automatic weighing instrument must be [F11clear, legible and in easily understandable English].
Extent Information
E4This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F10Reg. 11(2) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 10(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F11Words in reg. 11(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 10(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
11.—(1) A manufacturer must ensure that regulated non-automatic weighing instruments manufactured by that manufacturer are accompanied by instructions and information easily understood by end-users.
(2) Where end-users are in [F35Northern Ireland], those instructions and information must be in English.
(3) Such instructions and information and any labelling relating to a regulated non-automatic weighing instrument must be clear, understandable and intelligible.
Extent Information
E14This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F35Words in reg. 11(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
12.—(1) This regulation applies where a manufacturer considers or has reason to believe that a regulated non-automatic weighing instrument placed on the market by that manufacturer is not in conformity with the requirements of these Regulations.
(2) The manufacturer must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the regulated non-automatic weighing instrument presents a risk, the manufacturer must immediately inform the competent [F12authority] to that effect giving details, in particular, of the non-compliance and of any corrective measures taken.
Extent Information
E5This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F12Word in reg. 12(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 11 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
12.—(1) This regulation applies where a manufacturer considers or has reason to believe that a regulated non-automatic weighing instrument placed on the market by that manufacturer is not in conformity with the requirements of these Regulations.
(2) The manufacturer must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the regulated non-automatic weighing instrument presents a risk, the manufacturer must immediately inform the competent national authorities of the [F36relevant] states in which the instrument has been made available on the market to that effect giving details, in particular, of the non-compliance and of any corrective measures taken.
Extent Information
E15This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F36Word in reg. 12(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(2)
13.—(1) A manufacturer must, further to a reasoned request from a competent authority, provide that authority, with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of a regulated non-automatic weighing instrument manufactured by that manufacturer with the requirements of these Regulations.
(2) Information and documentation supplied to a competent authority pursuant to this regulation must be supplied in English.
(3) A manufacturer must co-operate with a competent authority, at the request of that authority, on any action to eliminate the risks posed by regulated non-automatic weighing instruments that the manufacturer has placed on the market.
14.—(1) A manufacturer may, by written mandate, appoint an authorised representative to discharge the responsibilities of that manufacturer under these Regulations in relation to the placing on the market of a regulated non-automatic weighing instrument.
(2) The authorised representative does not have the power to discharge the manufacturer's obligations under regulations 6(a) and 6(b).
(3) The authorised representative must be treated as authorised to—
(a)keep the [F13EU] declaration of conformity and the technical documentation at the disposal of the market surveillance authority for 10 years beginning with the day after the day on which a regulated non-automatic weighing instrument has been placed on the market;
(b)provide a competent authority further to a reasoned request from that authority with all the information and documentation necessary to demonstrate the conformity of a regulated non-automatic weighing instrument; and
(c)co-operate with a competent authority, at its request, on any action taken to eliminate the risks posed by regulated non-automatic weighing instruments covered by its mandate.
Textual Amendments
F13Word in reg. 14(3)(a) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 12 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
15. This Chapter applies to the placing on the market of a regulated non-automatic weighing instrument that is imported into the United Kingdom from a country outside the [F14United Kingdom].
Extent Information
E6This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F14Words in reg. 15 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 13 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
15. This Chapter applies to the placing on the market of a regulated non-automatic weighing instrument that is imported into [F37Northern Ireland] from a country outside the [F38relevant market].
Extent Information
E16This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F37Words in reg. 15 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
F38Words in reg. 15 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(3)
16.—(1) An importer must only place compliant regulated non-automatic weighing instruments on the market.
(2) An importer must ensure that—
(a)the appropriate conformity assessment procedure has been carried out by the manufacturer of the regulated non-automatic weighing instrument (or by the importer where the importer is to be regarded as the manufacturer by virtue of regulation 5(2);
(b)the manufacturer has drawn up the technical documentation (or that the importer has done so where the importer is treated as the manufacturer by virtue of regulation 5(2);
(c)the regulated non-automatic weighing instrument bears the [F15UK] marking and the M marking;
(d)the manufacturer (or the importer where he is treated as the manufacturer under regulation 5(2)) has complied with the requirements of regulations 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.) and 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments).
Extent Information
E7This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F15Word in reg. 16(2)(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 14 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
16.—(1) An importer must only place compliant regulated non-automatic weighing instruments on the market.
(2) An importer must ensure that—
(a)the appropriate conformity assessment procedure has been carried out by the manufacturer of the regulated non-automatic weighing instrument (or by the importer where the importer is to be regarded as the manufacturer by virtue of regulation 5(2);
(b)the manufacturer has drawn up the technical documentation (or that the importer has done so where the importer is treated as the manufacturer by virtue of regulation 5(2);
(c)the regulated non-automatic weighing instrument bears the CE marking and the M marking;
(d)the manufacturer (or the importer where he is treated as the manufacturer under regulation 5(2)) has complied with the requirements of regulations 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.) and 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments).
Extent Information
E17This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
17. Where an importer considers, or has reason to believe, that the regulated non-automatic weighing instrument is not in conformity with the essential requirements and presents a risk, the importer must inform the manufacturer and the market surveillance authority.
18.—(1) An importer must indicate on any regulated non-automatic weighing instrument imported by that importer, the importer's name, registered trade name or trademark, and the postal address at which the importer can be contacted.
[F16(2) Paragraph (1) does not apply where—
(a)either—
(i)the importer would have to open the packaging in order to indicate the information on the instrument; or
(ii)the importer has imported the instrument from an EEA state or Switzerland and places it on the market within the period of 24 months beginning with IP completion day, and
(b)before placing the instrument on the market, the importer sets out the information referred to in paragraph (1)—
(i)where sub-paragraph (a)(i) applies, on the packaging and in a document accompanying the instrument;
(ii)where sub-paragraph (a)(ii) applies, in a document accompanying the instrument.]
(3) The contact details required by this regulation must be [F17clear, legible and in easily understandable] English.
Extent Information
E8This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F16Reg. 18(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 15(a) (with Sch. 26 para. 5) (as amended by S.I. 2019/1246, regs. 1(3), 5; S.I. 2020/676, regs. 1(1), 2; S.I. 2020/852, regs. 2(2), 4(2), Sch. 1 para. 1(o)(iv) and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 2(1)(j)); 2020 c. 1, Sch. 5 para. 1(1)
F17Words in reg. 18(3) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 15(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
Modifications etc. (not altering text)
C1Reg. 18 modified by The Conformity Assessment (Mutual Recognition Agreements) Regulations 2019 (S.I. 2019/392), reg. 6 (as inserted (temp.) (10.9.2019) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(2)(4), 2(3) (with reg. 18))
18.—(1) An importer must indicate on any regulated non-automatic weighing instrument imported by that importer, the importer's name, registered trade name or trademark, and the postal address at which the importer can be contacted.
(2) Where this would require the packaging to be opened, those indications may be given on the packaging and in a document accompanying the instrument.
(3) The contact details required by this regulation must be in a language that is easily understood by end-users and market surveillance authorities, and in the case of regulated non-automatic weighing instruments made available in [F39Northern Ireland], they must be in English.
Extent Information
E18This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F39Words in reg. 18(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
Modifications etc. (not altering text)
C2Reg. 18 modified by The Conformity Assessment (Mutual Recognition Agreements) Regulations 2019 (S.I. 2019/392), reg. 6 (as inserted (temp.) (10.9.2019) by The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019 (S.I. 2019/1246), regs. 1(2)(4), 2(3) (with reg. 18))
19.—(1) An importer must ensure that regulated non-automatic weighing instruments imported by the importer are accompanied by instructions and information [F18which are clear, legible and in easily understandable English].
F19(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extent Information
E9This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F18Words in reg. 19(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 16(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F19Reg. 19(2) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 16(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
19.—(1) An importer must ensure that regulated non-automatic weighing instruments imported by the importer are accompanied by instructions and information in a language easily understood by end users
(2) Where end users are in [F40Northern Ireland], the instructions and information referred to in paragraph (1) must be in English.
Extent Information
E19This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F40Words in reg. 19(2) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
20. An importer must, in respect of regulated non-automatic weighing instruments under the importer's responsibility, ensure that the conditions of their storage or transport are not such as to jeopardise their continuing compliance with the essential requirements.
21.—(1) When deemed appropriate with regard to the performance of a regulated non-automatic weighing instrument imported by an importer, the importer must—
(a)carry out a sample testing of regulated non-automatic weighing instruments made available on the market by the importer;
(b)investigate complaints about regulated non-automatic weighing instruments imported by them; and
(c)if necessary, keep a register of—
(i)such complaints;
(ii)non-conforming regulated non-automatic weighing instruments;
(iii)regulated non-automatic weighing instrument recalls; and
(d)where the importer is not also the distributor of the regulated non-automatic weighing instrument, keep distributors, to whom he has supplied an instrument, informed of any monitoring undertaken by that importer.
22.—(1) This regulation applies where an importer considers, or has reason to believe, that a regulated non-automatic weighing instrument placed on the market by the importer is not in conformity with the requirements of these Regulations.
(2) Where this regulation applies, the importer must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the non-automatic weighing instrument presents a risk, the importer must immediately inform the competent authority to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that importer.
23. The importer must, for a period of 10 years beginning with the day after the day on which the regulated non-automatic weighing instrument is placed on the market, keep a copy of the [F21EU] declaration of conformity at the disposal of the market surveillance authorities and ensure that the technical documentation can be made available to those authorities upon request.
Textual Amendments
F20Word in reg. 23 heading omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 17 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F21Word in reg. 23 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 17 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
24.—(1) The importer must, further to a reasoned request from a competent authority, provide the competent authority with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of the regulated non-automatic weighing instrument with the requirements of these Regulations.
(2) Information and documentation supplied to a competent authority pursuant to this regulation must be supplied in English.
(3) An importer must co-operate with a competent authority, at its request, as regards any action to eliminate the risks posed by any regulated non-automatic weighing instrument that the importer has placed on the market.
25. This Chapter applies in relation to the making available on the market of a regulated non-automatic weighing instrument by a distributor.
26. Before making the regulated non-automatic instrument available on the market, the distributor must act with due care in relation to the requirements of these Regulations.
27.—(1) The distributor must verify that the regulated non-automatic weighing instrument bears the [F22UK] marking and the M marking.
(2) The distributor must verify that the regulated non-automatic weighing instrument, it is accompanied by instructions and information [F23which are clear, legible and in easily understandable English].
F24(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(4) The distributor must verify that the manufacturer and the importer have complied with the requirements set out in regulation 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.), regulation 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments) and regulation 18 (requirements to mark importers' details on regulated non-automatic weighing instruments).
Extent Information
E10This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F22Word in reg. 27(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 18(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F23Words in reg. 27(2) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 18(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F24Reg. 27(3) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 18(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
27.—(1) The distributor must verify that the regulated non-automatic weighing instrument bears the CE marking and the M marking.
(2) The distributor must verify that the regulated non-automatic weighing instrument, it is accompanied by instructions and information easily understood by end users.
(3) Instructions and information supplied in accordance with this regulation must be in a language that is easily understood by end users and where those users are in [F41Northern Ireland] must be in English.
(4) The distributor must verify that the manufacturer and the importer have complied with the requirements set out in regulation 9 (manufacturers' obligations in relation to the marking of regulated non-automatic weighing instruments with serial numbers etc.), regulation 10 (manufacturers to mark contact details on regulated non-automatic weighing instruments) and regulation 18 (requirements to mark importers' details on regulated non-automatic weighing instruments).
Extent Information
E20This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F41Words in reg. 27(3) substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 13 para. 3(1)
28.—(1) This regulation applies where a distributor considers, or has reason to believe, that a regulated non-automatic weighing instrument is not in conformity with the essential requirements.
(2) Where this regulation applies, the distributor must not make the regulated non-automatic weighing instrument available on the market until it has been brought into conformity.
(3) Where the regulated non-automatic weighing instrument presents a risk, the distributor must immediately inform—
(a)the manufacturer;
(b)the importer (where the distributor is not also the manufacturer or importer); and
(c)the market surveillance authority,
to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that distributor.
29. A distributor must, in respect of regulated non-automatic weighing instruments under that distributor's responsibility, ensure that the conditions of their storage or transport are not such as to jeopardise their continuing compliance with the essential requirements.
30.—(1) This regulation applies where a distributor considers, or has reason to believe, that a regulated non-automatic weighing instrument [F25made available] on the market by that distributor is not in conformity with the requirements of these Regulations.
(2) Where this regulation applies, the distributor must immediately take the corrective measures necessary to bring the regulated non-automatic weighing instrument into conformity, or withdraw or recall it, if appropriate.
(3) Where the regulated non-automatic weighing instrument presents a risk, the distributor must immediately inform the competent authority to that effect, giving details, in particular, of the non-compliance of the instrument and of the corrective measures taken by that distributor.
Textual Amendments
F25Words in reg. 30(1) substituted (1.2.2019) by The Weights and Measures etc. (Miscellaneous) (Amendment) Regulations 2019 (S.I. 2019/5), regs. 1, 7(2)
31.—(1) The distributor must, further to a reasoned request from a competent authority, provide that authority with all the information and documentation in paper or electronic form necessary to demonstrate the conformity of the regulated non-automatic weighing instrument with the requirements of these Regulations.
(2) Information and documentation supplied to a competent authority pursuant to this regulation must be supplied in English.
(3) A distributor must co-operate with a competent authority, at its request, as regards any action to eliminate the risks posed by any regulated non-automatic weighing instrument that the distributor has placed on the market.
32.—(1) Economic operators must, on request, identify to the market surveillance authorities—
(a)any economic operator who has supplied them with a regulated non-automatic weighing instrument; and
(b)any economic operator to whom they have supplied a regulated non-automatic weighing instrument.
(2) Economic operators must be able to present the information referred to in paragraph (1) for 10 years beginning with the day on which they have been supplied with the regulated non-automatic weighing instrument and for 10 years beginning with the day after the day on which they have supplied the instrument.
(3) The Secretary of State may impose a monetary penalty on an economic operator who fails to comply with an obligation imposed by this regulation.
(4) Schedule 5 has effect in relation to the imposition of a monetary penalty under paragraph (3).
32A.—(1) In this regulation—
(a)any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive;
(b)“CE marking” has the meaning given to it in Article 2(19);
(c)“Module B” means the conformity assessment procedure set out in point 1 of Annex II;
(d)“EU-type examination certificate” means an EU-type examination certificate issued in accordance with Module B;
(e)“harmonised standard” has the meaning given to it in Article 2(11).
(2) Paragraph (3) applies where, before placing a non-automatic weighing instrument on the market, the manufacturer—
(a)ensures that the non-automatic weighing instrument has been designed and manufactured in accordance with the essential requirements set out in Annex I;
(b)ensures that the relevant conformity assessment procedures that apply to that non-automatic weighing instrument in accordance with Article 13 have been carried out;
(c)draws up the technical documentation referred to in Annex II;
(d)ensures that the technical documentation and other records and correspondence relating to the conformity assessment procedures are prepared in or translated into English;
(e)affixes the CE marking and the supplementary metrology marking, in accordance with Articles 16 and 17(1) to (5);
(f)affixes the inscriptions provided for in points 1 or 2 of Annex III in accordance with Article 6(5);
(g)affixes where required in accordance with Article 6(5) the restrictive use symbol as provided for in Article 18 and in point 3 of Annex III;
(h)draws up an EU declaration of conformity, in accordance with Article 14; and
(i)ensures that the EU declaration of conformity is prepared in or translated into English.
(3) Where this paragraph applies—
(a)the requirements of regulations 6, 9(3) and (4), 41 and 45(2) are to be treated as being satisfied;
(b)regulations 7, 8(2), 44, 63(1)(a) to (e), 67, 68 and 71 apply subject to the modifications in paragraph (8); and
(c)Regulations 34 to 36 do not apply.
(4) Paragraph (5) applies where, before placing a regulated non-automatic weighing instrument on the market, the importer ensures that—
(a)the relevant conformity assessment procedure referred to in Article 13 has been carried out;
(b)the manufacturer has drawn up the technical documentation referred to in Annex II; and
(c)the non-automatic weighing instrument bears the CE marking and supplementary metrology marking in accordance with Articles 16 and 17(1) to (5).
(5) Where this paragraph applies—
(a)the requirements of regulation 16(2)(a) to (c) are to be treated as being satisfied; and
(b)regulations 23, 63(1)(a) to (e), 67 and 68 apply subject to the modifications in paragraph (8).
(6) Paragraph (7) applies where, before making a regulated non-automatic weighing instrument available on the market, a distributor ensures that the non-automatic weighing instrument bears the CE marking and the inscriptions referred to in point 1 of Annex III.
(7) Where this paragraph applies—
(a)regulation 27(1) is to be treated as being satisfied; and
(b)regulations 28(1), 28(2), 29, 63(1)(a), 63(1)(b), 67, 68 and 71 apply subject to the modifications in paragraph (8).
(8) The modifications referred to in sub-paragraphs (3)(b), (5)(b) and (7)(b) are that—
(a)any reference to “declaration of conformity” is to be read as a reference to the EU declaration of conformity;
(b)any reference to “UK marking” is to be read as a reference to the CE marking;
(c)any reference to “designated standard” is to be read as a reference to a harmonised standard;
(d)any reference to “relevant conformity assessment procedure” is to be read as a reference to the relevant conformity assessment procedures referred to in Article 13;
(e)any reference to “technical documentation” is to be read as a reference to the technical documentation referred to in Annex II;
(f)any reference to “type examination certificate” is to be read as a reference to an EU-type examination certificate;
(g)any reference to “M marking” is to be read as a reference to the supplementary metrology marking;
(h)[F27except in relation to regulation 68,] any reference to “approved body” is to be read as a reference to the body that undertook any conformity assessment procedure in accordance with Article 13;
(i)any reference to “authorised mark” includes the CE marking and the supplementary metrology marking.]
Textual Amendments
F26Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
F27Words in reg. 32A(8)(h) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(3)
32B.—(1) In this regulation—
(a)any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive;
(b)“EU-type examination certificate” means an EU-type examination certificate issued in accordance with the conformity assessment procedure set out in point 1 of Annex II (Module B);
(c)any reference to “the first stage of the conformity assessment procedure” is a reference to one or both of the following—
(i)all examinations and tests which are not gravity dependent and which are included in the conformity assessment procedures set out in points 2 to 5 of Annex II;
(ii)the examinations and tests included in the conformity assessment procedures set out in points 2 to 5 of Annex II that may be carried out at the manufacturer's works or any other location where—
(aa)the transport of the instrument to its place of use requires dismantling of the instrument; or
(bb)the putting into service of the instrument in its place of use requires assembly of the instrument or other technical installation work that is likely to affect the instrument's performance.
(2) Paragraph (3) applies where, prior to the manufacture of a non-automatic weighing instrument the manufacturer has ensured that the conformity assessment procedure as set out in point 1 of Annex II (Module B) has been carried out.
(3) Where this paragraph applies—
(a)the reference in regulation 36(a) to “Module B as set out in point 1 of Schedule 7” is to be read as a reference to the conformity assessment procedure as set out in point 1 of Annex II (Module B); and
(b)regulations 6(b) and (c), 7, 16(2)(a) and (b), 63(1)(e), 67(2)(b), 68(4)(b) and paragraph 1 of Schedule 1 apply subject to the modifications in paragraph (6).
(4) Paragraph (5) applies where—
(a)in accordance with point 7.1 of Annex II, the procedures set out in points 2 to 5 of that Annex may be carried out in two stages; and
(b)the first stage of the conformity assessment procedure is carried out in accordance with any of the following points of Annex II—
(i)point 2 (Module D);
(ii)point 3 (Module D1);
(iii)point 4 (Module F); or
(iv)point 5 (Module F1).
(5) Where this paragraph applies—
(a)the reference in regulation 36(1)(a)(i) to “Module D as set out in point of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 2 of Annex II (Module D);
(b)the reference in regulation 36(1)(a)(ii) to “Module F as set out in point 4 of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 4 of Annex II (Module F);
(c)the reference in regulation 36(3)(a) to “Module D1 as set out in point 3 of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 3 of Annex II (Module D1);
(d)the reference in regulation 36(3)(b) to “Module F1 as set out in point 5 of Schedule 7” is to be read as including the first stage of the conformity assessment procedure as set out in point 5 of Annex II (Module F1);
(e)regulations 6(b) and (c), 7, 16(2)(a) and (b), 45(6) and (7), 63(1)(c) and (e) and 67(1)(c) apply subject to the modifications in paragraph (6).
(6) The modifications referred to in paragraphs (3)(b) and (5)(e) are that—
(a)any reference to “relevant conformity assessment procedure” is to be read as including—
(i)where paragraph (3) applies, the conformity assessment procedure set out in point 1 of Annex II;
(ii)where paragraph (5) applies, the relevant first stage conformity assessment procedure;
(b)any reference to “type examination” is to be read as a reference to the EU-Type examination certificate;
(c)any reference to “technical documentation” is to be read as including the technical documentation required by points 1 to 5 of Annex II (as applicable);
(d)any reference to “approved body” is to be read as including the body which undertook the first stage conformity assessment procedure.]
Textual Amendments
F26Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
32C.—(1) Subject to [F28paragraphs (2) and (6)], regulation 32A ceases to have effect at the end of the period of [F2924 months] beginning with IP completion day.
(2) Notwithstanding the expiry of regulation 32A—
(a)any non-automatic weighing instrument which was placed on the market pursuant to regulation 32A may continue to be made available on the market on or after the expiry of regulation 32A;
(b)any obligation to which a person was subject under regulation 32A in respect of any non-automatic weighing instrument placed on the market pursuant to regulation 32A continues to have effect after the expiry of regulation 32A, in respect of that instrument.
(3) Subject to [F30paragraphs (4) and (6)], regulation 32B ceases to have effect at the end of the period of [F3124 months] beginning with IP completion day.
(4) Where a conformity assessment procedure has been completed pursuant to regulation 32B in relation to a non-automatic weighing instrument prior to the expiry of regulation 32B, regulation 32B continues to apply in respect of that instrument where—
(a)the manufacturer arranges for the EU-Type examination certificate and any annexes to be transferred to an approved body;
(b)the approved body referred to in sub-paragraph (a) accepts responsibility for the EU-Type examination certificate; and
(c)the approved body issues a Type-examination certificate relying, or relying in part, on any examinations or tests undertaken prior to the issue of the EU-Type examination certificate.
(5) In paragraph (4) “EU-Type examination certificate” has the meaning given to it in regulation 32B(1)(b).
[F32(6) regulations 67 and 68 continue to have effect in relation to any non-automatic weighing instrument—
(a)placed on the market pursuant to 32A; or
(b)in relation to which a manufacturer has undertaken a conformity assessment procedure in accordance with regulation 32B,
as if regulations 32A or 32B had not expired.]
Textual Amendments
F26Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
F28Words in reg. 32C(1) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(4)(a)
F29Words in reg. 32C(1) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 7, Sch. 1 para. (p)
F30Words in reg. 32C(3) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(4)(b)
F31Words in reg. 32C(3) substituted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 7, Sch. 1 para. (p)
F32Reg. 32C(6) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(4)(c)
32D.—(1) Where paragraph (2) applies—
(a)a non-automatic weighing instrument is to be treated as being in conformity with the essential requirements; and
(b)each relevant economic operator is to be treated as having complied or as complying with the obligations imposed on them under Part 2.
(2) This paragraph applies where—
(a)a non-automatic weighing instrument is—
(i)in conformity with the essential requirements, within the meaning of that term in regulation 2, as it applies in Northern Ireland; and
(ii)qualifying Northern Ireland goods;
(b)each relevant economic operator has complied or is complying with the obligations imposed on them under Part 2, as that Part applies in Northern Ireland; and
(c)an importer has complied with the obligations set out in paragraph (3).
(3) The obligations referred to in paragraph (2)(c) are that, before placing the non-automatic weighing instrument on the market, the importer—
(a)complies with regulation 18;
(b)ensures that—
(i)the relevant conformity assessment procedure has been carried out in accordance with Part 3, as that Part applies in Northern Ireland;
(ii)the manufacturer has drawn up the technical documentation; and
(iii)the non-automatic weighing instrument bears the CE marking.
[F33(3A) After a non-automatic weighing instrument has been placed on the market pursuant to this regulation, regulations 67 and 68 are to be read in relation to that instrument subject to the following modifications—
(a)the reference in regulation 67(1)(a) to “UK marking” is to be read as a reference to the CE marking, within the meaning of regulation 2(1) as it applies in Northern Ireland;
(b)the reference in regulation 67(1)(b) to “M marking”, is to be read as a reference to the M Marking as defined in regulation 2(1), as it applies in Northern Ireland;
(c)the reference in regulation 67(1)(c) to “approved body” is to be read as a reference to a “notified body” as defined in regulation 2(1), as it applies in Northern Ireland;
(d)the references in regulations 67(2)(a) and 68(4)(a) to “essential requirements” are to be read as the essential requirements within the meaning of that term in regulation 2(1), as it applies in Northern Ireland; and
(e)the references in regulations 67(2)(b) and 68(4)(b) to “type examination certificate” is to be read as a reference to an EU-type examination certificate as defined in regulation 2(1), as it applies in Northern Ireland.]
(4) In this regulation—
“CE marking” has the meaning given to it in regulation 2(1), as it applies in Northern Ireland;
“qualifying Northern Ireland goods” has the meaning given to it in regulations made under section 8C(6) of the European Union (Withdrawal) Act 2018;
“technical documentation” has the meaning given to it in regulation 2(1), as it applies in Northern Ireland.]
Textual Amendments
F26Regs. 32A-32D inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 19 (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 18(4)); 2020 c. 1, Sch. 5 para. 1(1)
F33Reg. 32D(3A) inserted (9.12.2021) by The Product Safety and Metrology etc. (Amendment) Regulations 2021 (S.I. 2021/1273), regs. 1, 11(5)