The Non-automatic Weighing Instruments Regulations 2016

InterpretationE+W+S

This section has no associated Explanatory Memorandum

2.—(1) In these Regulations—

F1...

F2...

[F3“approved body” has the meaning given to it in regulation 47 (approved bodies);]

“authorised representative” means any person established [F4in the United Kingdom] who has received a written mandate from a manufacturer to act on the manufacturer's behalf in relation to specified tasks;

F5...

“commencement date” means the date referred to in regulation 1(2);

F6...

“competent authority” means a person who is, pursuant to regulation 62 (competent authorities and enforcement proceedings), authorised to enforce these Regulations;

“compliance notice” means a notice served in accordance with regulation 63(2);

“conformity assessment” means the process demonstrating whether the essential requirements relating to a regulated non-automatic weighing instrument have been met;

“conformity assessment body” means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

[F7“conformity assessment procedure” means a procedure referred to in regulation 36;]

[F7“declaration of conformity” means a declaration of conformity required to be drawn up in accordance with Chapter 2 of Part 3;]

[F7“designated standard” has the meaning given to it in regulation 2A;]

“the Directive” means Directive 2014/31/EU of the European Parliament and of the Council of 26th February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of non-automatic weighing instruments M1 and references to the Directive (or a specific provision of it) are references to the Directive (or that provision) [F8(as it has effect immediately before IP completion day)];

[F9“disqualification mark” means a marking in the form set out in paragraph 1 of Schedule A1;]

“distributor” means any person in the supply chain, other than a manufacturer or an importer, who makes a non-automatic weighing instrument available on the market;

“economic operator” means a manufacturer, authorised representative, importer or distributor;

“enforcement notice” means a notice served in accordance with regulation 64(2);

“enforcement officer” means—

(a)

an inspector; or

(b)

a person appointed by the Secretary of State to act on the Secretary of State's behalf to enforce these Regulations;

“essential requirements” means, in relation to a regulated non-automatic weighing instrument (or a class of that instrument), the requirements specified as being applicable in relation to that regulated non-automatic weighing instrument (or that class of instrument) in [F10Schedule 6] ;

F11...

F12...

F13...

[F14“importer” means a person who—

(a)

is established in the United Kingdom and places a non-automatic weighing instrument from a country outside of the United Kingdom on the market; or

(b)

is established in Northern Ireland and places a non-automatic weighing instrument on the market that has been supplied to them for distribution, consumption or use in the course of a commercial activity, whether in return for payment or free of charge, from an EEA state;]

“in writing” includes text that is—

(a)

transmitted by electronic means;

(b)

received in legible form; and

(c)

capable of being used for subsequent reference.

“M marking” means a marking applied to a regulated non-automatic weighing instrument which consists of the capital letter ‘M’ and the last two digits of the year of its affixing surrounded by a rectangle, the height of which is equal to that of the [F15UK] marking applied to that instrument;

“make available on the market” means any supply of a non-automatic weighing instrument for distribution or use on the [F16market of Great Britain] in the course of a commercial activity, whether in return for payment or free of charge and related expressions are to be construed accordingly;

“manufacturer” means any person who—

(a)

manufactures a non-automatic weighing instrument or has a non-automatic weighing instrument designed or manufactured and markets that instrument under their name or trademark; or

(b)

is to be treated as a manufacturer by virtue of regulation 5(2);

“market surveillance authority” means the Secretary of State acting in the capacity of market surveillance authority pursuant to the designation made by regulation 57 (the market surveillance authority), and, where the context requires, a market surveillance authority in another EEA state;

F17...

“non-automatic weighing instrument” means a weighing instrument that—

(a)

serves to determine the mass of a body by using the action of gravity on that body and which may also serve to determine other mass-related magnitudes, quantities, parameters and characteristics; and

(b)

requires the intervention of an operator during weighing;

“notified body” means a conformity assessment body that has been notified to the Commission in accordance with Part 5 and includes, where the context so requires, a notified body designated as such in another EEA state in accordance with the Directive;

F18...

F19...

“place on the market” means the first making available of a non-automatic weighing instrument on the market [F20of Great Britain] and related expressions are to be construed accordingly;

“RAMS” means Regulation (EC) 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 M2 (as amended from time to time);

“recall” means any measure aimed at achieving the return of a regulated non-automatic weighing instrument that has already been made available to the end-user and related expressions are to be construed accordingly;

“regulated non-automatic weighing instrument” means a non-automatic weighing instrument which is intended to be used to perform one of the functions referred to in regulation 3(2);

“relevant economic operator” means, in relation to a non-automatic weighing instrument, an economic operator with obligations in respect of that non-automatic weighing instrument under Part 2;

[F21“re-qualification mark” means a marking in the form set out in paragraph 2 of Schedule A1;]

“technical documentation” means the documentation which meets the requirements of [F22Schedule 7];

“technical specification” means a document that prescribes technical requirements to be fulfilled by a regulated non-automatic weighing instrument;

[F23“Type-examination certificate” means a type-examination certificate issued by an approved body in accordance with Module B of Schedule 7;]

[F23“UK marking” means the marking in the form set out in Annex 2 of RAMS;]

[F23“UK national accreditation body” means the body appointed by the Secretary of State in accordance with Article 4 of RAMS;]

F24...

“United Kingdom Accreditation Service” means the company limited by guarantee incorporated in England and Wales under number 3076190;

“weights and measures authority” means a local weights and measures authority within the meaning set out in section 69 of the Weights and Measures Act 1985;

“withdraw” when used in relation to a regulated non-automatic weighing instrument means taking any measure aimed at preventing an instrument in the supply chain from being made available on the market and related expressions are to be construed accordingly.

[F25(1A) Schedules 6 to 8 reproduce the provisions of Annexes I to III to the Directive (respectively) with amendments to correct deficiencies in retained EU law.

(1B) A reference to any provision of Schedules 6 to 8 is a reference to the equivalent provision of the relevant Annex to the Directive as set out in the relevant Schedule.]

F26(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(3) Other expressions used in these Regulations have in relation to the application of these Regulations to—

(a)Great Britain, the same meanings as in the Weights and Measures Act 1985 M3; and

(b)Northern Ireland, the same meanings as in the Weights and Measures (Northern Ireland) Order 1981 M4.

Extent Information

E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Marginal Citations

M1OJ L 96, 29.3.2014 p. 107.

M2OJ L 218, 13.8.2008, p. 30.

InterpretationN.I.

2.—(1) In these Regulations—

“accreditation” means accreditation as defined in point 10 of Article 2 of RAMS;

“accreditation certificate” means a certificate, issued by the United Kingdom Accreditation Service or a national accreditation body as defined in point 11 of Article 2 of RAMS in another [F27relevant] state, attesting that a conformity assessment body meets the notified body requirements;

“authorised representative” means any person established within the [F28relevant market] who has received a written mandate from a manufacturer to act on the manufacturer's behalf in relation to specified tasks;

“CE marking” means a marking which takes the form set out in Annex II of RAMS;

“commencement date” means the date referred to in regulation 1(2);

“Commission” means the Commission of the European Union:

“competent authority” means a person who is, pursuant to regulation 62 (competent authorities and enforcement proceedings), authorised to enforce these Regulations;

“compliance notice” means a notice served in accordance with regulation 63(2);

“conformity assessment” means the process demonstrating whether the essential requirements relating to a regulated non-automatic weighing instrument have been met;

“conformity assessment body” means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

“the Directive” means Directive 2014/31/EU of the European Parliament and of the Council of 26th February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of non-automatic weighing instruments F29 and references to the Directive (or a specific provision of it) are references to the Directive (or that provision) as from time to time amended;

[F9“disqualification mark” means a marking in the form set out in paragraph 1 of Schedule A1;]

“distributor” means any person in the supply chain, other than a manufacturer or an importer, who makes a non-automatic weighing instrument available on the market;

“economic operator” means a manufacturer, authorised representative, importer or distributor;

“enforcement notice” means a notice served in accordance with regulation 64(2);

“enforcement officer” means—

(a)

an inspector; or

(b)

a person appointed by the Secretary of State to act on the Secretary of State's behalf to enforce these Regulations;

“essential requirements” means, in relation to a regulated non-automatic weighing instrument (or a class of that instrument), the requirements specified as being applicable in relation to that regulated non-automatic weighing instrument (or that class of instrument) in Annex I to the Directive;

“EU declaration of conformity” means a declaration of conformity required to be drawn up in accordance with Chapter 2 of Part 3;

“EU-type examination certificate” means an EU-type examination certificate issued by a notified body in accordance with Module B of Annex II to the Directive;

“harmonised standard” has the meaning set out in point 1(c) of Article 2 of Regulation (EU) No. 1025/2012 of the European Parliament and of the Council on European standardisation F30 (as amended from time to time);

“importer” means any person who—

(a)

is established within the [F31relevant market]; and

(b)

places a non-automatic weighing instrument from a [F32market outside of the relevant market on the relevant] market;

“in writing” includes text that is—

(a)

transmitted by electronic means;

(b)

received in legible form; and

(c)

capable of being used for subsequent reference.

“M marking” means a marking applied to a regulated non-automatic weighing instrument which consists of the capital letter ‘M’ and the last two digits of the year of its affixing surrounded by a rectangle, the height of which is equal to that of the CE marking applied to that instrument;

“make available on the market” means any supply of a non-automatic weighing instrument for distribution or use on the [F33relevant market] in the course of a commercial activity, whether in return for payment or free of charge and related expressions are to be construed accordingly;

“manufacturer” means any person who—

(a)

manufactures a non-automatic weighing instrument or has a non-automatic weighing instrument designed or manufactured and markets that instrument under their name or trademark; or

(b)

is to be treated as a manufacturer by virtue of regulation 5(2);

“market surveillance authority” means the Secretary of State acting in the capacity of market surveillance authority pursuant to the designation made by regulation 57 (the market surveillance authority), and, where the context requires, a market surveillance authority in another [F34relevant] state;

“national accreditation body” means the national accreditation body as defined in point 11 of Article 2 of RAMS;

[F35“NI Protocol obligation” means any obligation created or arising by or under the Protocol on Ireland/ Northern Ireland in the EU withdrawal agreement, whether or not an obligation to which section 7A(2) of the European Union (Withdrawal) Act 2018 applies;]

“non-automatic weighing instrument” means a weighing instrument that—

(a)

serves to determine the mass of a body by using the action of gravity on that body and which may also serve to determine other mass-related magnitudes, quantities, parameters and characteristics; and

(b)

requires the intervention of an operator during weighing;

“notified body” means a conformity assessment body that has been notified to the Commission in accordance with Part 5 and includes, where the context so requires, a notified body designated as such in another [F36relevant] state in accordance with the Directive;

“notified body requirements” means the requirements set out in Schedule 3 (requirements related to notified bodies)

“notifying authority” means the notifying authority within the meaning of regulation 48 (the notifying authority);

“place on the market” means the first making available of a non-automatic weighing instrument on the [F37relevant market] and related expressions are to be construed accordingly;

“RAMS” means Regulation (EC) 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 F38 (as amended from time to time);

“recall” means any measure aimed at achieving the return of a regulated non-automatic weighing instrument that has already been made available to the end-user and related expressions are to be construed accordingly;

“regulated non-automatic weighing instrument” means a non-automatic weighing instrument which is intended to be used to perform one of the functions referred to in regulation 3(2);

“relevant economic operator” means, in relation to a non-automatic weighing instrument, an economic operator with obligations in respect of that non-automatic weighing instrument under Part 2;

[F39“relevant market” means—

(a)

the market in Northern Ireland; and

(b)

the market of the EEA states;]

[F39“relevant state” means—

(a)

Northern Ireland; or

(b)

any EEA state;]

[F21“re-qualification mark” means a marking in the form set out in paragraph 2 of Schedule A1;]

“technical documentation” means the documentation which meets the requirements of Annex II to the Directive;

“technical specification” means a document that prescribes technical requirements to be fulfilled by a regulated non-automatic weighing instrument;

[F40“UK(NI) indication” means the marking in the form set out in Schedule 1 to the Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020;]

“Union harmonisation legislation” means any European Union legislation harmonising the conditions for the marketing of products;

“United Kingdom Accreditation Service” means the company limited by guarantee incorporated in England and Wales under number 3076190;

“weights and measures authority” means a local weights and measures authority within the meaning set out in section 69 of the Weights and Measures Act 1985;

“withdraw” when used in relation to a regulated non-automatic weighing instrument means taking any measure aimed at preventing an instrument in the supply chain from being made available on the market and related expressions are to be construed accordingly.

(2) A non-automatic weighing instrument that meets the requirements of the Directive by virtue of the laws of another [F41relevant] state is to be treated as meeting the requirements of these Regulations (except any requirement of these Regulations for anything to be written in English) and references to a non-automatic weighing instruments being in conformity with these Regulations are to be construed accordingly.

(3) Other expressions used in these Regulations have in relation to the application of these Regulations to—

(a)Great Britain, the same meanings as in the Weights and Measures Act 1985 F42; and

(b)Northern Ireland, the same meanings as in the Weights and Measures (Northern Ireland) Order 1981 F43.

Extent Information

E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

F29OJ L 96, 29.3.2014 p. 107.

F30OJ L 316, 14.11.2012, p. 12.

F38OJ L 218, 13.8.2008, p. 30.