45.—(1) The [F2UK] marking and M marking (“the markings”) must be affixed to a regulated non-automatic weighing instrument in accordance with the provisions of this regulation.
(2) The markings must be affixed visibly, legibly and indelibly to the regulated non-automatic weighing instrument [F3, its data plate, or where regulation 6(2) applies in respect of the UK marking, to a label affixed to the regulated non-automatic weighing instrument, or to a document accompanying the regulated non-automatic weighing instrument].
(3) The markings must be affixed before the regulated non-automatic weighing instrument is placed on the market.
(4) The M marking must immediately follow the [F4UK] marking.
(5) The markings must immediately be followed by the identification of the [F5approved] body where that body is involved in the production control phase as set out in [F6Schedule 7].
(6) The identification number of the [F7approved] body which carried out the conformity assessment procedure must be affixed by the body itself, or under its instructions by the manufacturer or the manufacturer's authorised representative.
(7) The markings and the identification number of the [F8approved] body may be followed by any other mark indicating a special risk or use.
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Word in reg. 45 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Word in reg. 45(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in reg. 45(2) substituted (E.W.S.) (31.12.2020) by S.I. 2019/696, Sch. 26 para. 31(ab) (as inserted by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 18(5))
F4Word in reg. 45(4) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F5Word in reg. 45(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Words in reg. 45(5) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F7Word in reg. 45(6) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F8Word in reg. 45(7) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 31(c) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
45.—(1) The CE marking and M marking (“the markings”) must be affixed to a regulated non-automatic weighing instrument in accordance with the provisions of this regulation.
(2) The markings must be affixed visibly, legibly and indelibly to the regulated non-automatic weighing instrument or its data plate.
(3) The markings must be affixed before the regulated non-automatic weighing instrument is placed on the market.
(4) The M marking must immediately follow the CE marking.
(5) The markings must immediately be followed by the identification of the notified body where that body is involved in the production control phase as set out in Annex II to the Directive.
(6) The identification number of the notified body which carried out the conformity assessment procedure must be affixed by the body itself, or under its instructions by the manufacturer or the manufacturer's authorised representative.
(7) The markings and the identification number of the notified body may be followed by any other mark indicating a special risk or use.
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only