- Latest available (Revised)
- Point in Time (28/12/2016)
- Original (As made)
Version Superseded: 31/12/2020
Point in time view as at 28/12/2016. This version of this provision has been superseded.
You are viewing this legislation item as it stood at a particular point in time. A later version of this or provision, including subsequent changes and effects, supersedes this version.
Note the term provision is used to describe a definable element in a piece of legislation that has legislative effect – such as a Part, Chapter or section.
There are currently no known outstanding effects for the The Measuring Instruments Regulations 2016, Section 3.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
3.—(1) In these Regulations the expression “measuring instruments” comprises the following—
(a)water meters;
(b)gas meters and sub-assemblies for inclusion in, or attachment to, gas meters in the form of volume conversion devices;
(c)active electrical energy meters;
(d)thermal energy meters and any of the following sub-assemblies—
(i)flow sensors;
(ii)temperature sensor pairs; and
(iii)calculators;
(e)non-water liquid measuring systems;
(f)automatic weighing instruments of the following kinds—
(i)automatic catchweighers;
(ii)automatic gravimetric filling instruments;
(iii)discontinuous totalisers;
(iv)beltweighers; and
(v)automatic rail weighbridges;
(g)taximeters;
(h)material measures;
(i)dimensional measuring instruments; and
(j)exhaust gas analysers.
(2) In these Regulations a reference to a regulated measuring instrument means a measuring instrument of any of the following descriptions —
(a)water meters used for trade for the supply of potable water in the temperature range from 0.1°C to and including 30°C;
(b)gas meters for use for trade except a gas meter which is used under an agreement providing for the supply of a quantity of gas at a rate of flow which, if measured at a temperature of 15°C and a pressure of 1013.25 millibars, would exceed 1600 cubic meters an hour (or the equivalent quantity in kilograms);
(c)active electrical energy meters for use for trade other than an instrument which is used under an agreement providing for the supply of active electrical energy where—
(i)the maximum quantity supplied exceeds 100 kilowatts per hour; and
(ii)the instrument provides measurement on a half-hourly basis;
(d)non-water liquid measuring systems for use for trade of the following descriptions—
(i)a measuring system which is used for the continuous and dynamic measurement in a quantity not exceeding 100 litres or 100 kilograms of a liquid fuel, lubricant or a mixture of fuel and lubricant other than—
(aa)liquefied petroleum gas; or
(bb)liquefied natural gas;
(ii)a measuring system (other than one used in connection with the refuelling of aircraft, ships or hovercraft) which is used for the continuous and dynamic measurement in a quantity exceeding 100 litres or 100 kilograms of liquid fuel delivered from a road tanker other than—
(aa)liquefied gases;
(bb)lubricating oils;
(cc)liquid fuels of a temperature below -153°C; or
(dd)liquid fuels of a dynamic viscosity exceeding 100 millipascal seconds at 15°C;
(e)automatic weighing instruments of the following kinds which are for use for trade—
(i)automatic gravimetric filling instruments;
(ii)automatic catchweighers (other than automatic checkweighers and automatic weight grading instruments);
(iii)automatic rail-weighbridges;
(iv)beltweighers; and
(v)discontinuous totalisers;
(f)taximeters intended for use for the protection of consumers;
(g)material measures which are for use for trade of the following kinds—
(i)material measures of length (excluding dipping and strapping tapes);
(ii)capacity serving measures for the measurement of draft beer or cider of the following capacities: 1/3 pint, ½ pint, 2/3 pint, 1 pint, 2 pints, 4 pints, 8 pints and 16 pints;
(iii)capacity serving measures for the measurement of liquids other than draft beer or cider M1 of the following capacities in millilitres (ml) and litres (l): 5 ml, 10 ml, 20 ml, 25 ml, 35 ml, 50 ml, 70 ml, 100 ml, 125 ml, 150 ml, 175 ml, 200 ml, 250 ml, 500 ml, 1 l, 2 l, 2.5 l, 5 l, 10 l and 20 l;
(h)exhaust gas analysers intended for use for the protection of the environment and public health except where the exhaust gas analyser includes or is connected to a device which is not used for the protection of the environment and public health;
(3) In these Regulations “non-prescribed measuring instruments” are measuring instruments that are neither regulated measuring instruments nor measuring instruments referred to in paragraph (4) and Schedule 2.
(4) These Regulations do not apply to the putting into use of the instruments listed in Schedule 2.
Marginal Citations
M1The Weights and Measures (Intoxicating Liquor) Order 1988 (S.I. 1988/2039 amended by S.I. 1990/1550, 1994/1883, 2009/663 and S.I. 2011/2331) makes provision as to the units of measurement and capacities that may be used in relation to certain intoxicating liquors.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: