Search Legislation

The Environmental Permitting (England and Wales) Regulations 2016

Changes to legislation:

There are currently no known outstanding effects for the The Environmental Permitting (England and Wales) Regulations 2016, SCHEDULE 10. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Regulation 35(1)

SCHEDULE 10E+WLandfill

This schedule has no associated Explanatory Memorandum

ApplicationE+W

1.  This Schedule applies in relation to every landfill except a landfill which finally ceased to accept waste for disposal before 16th July 2001.

Interpretation: generalE+W

2.—(1) In this Schedule—

(a)unless otherwise provided, an expression that is defined in the Landfill Directive has the meaning given in that Directive,

(b)the Decision” means Council Decision 2003/33/EC M1,

(c)the Decision Annex” means the Annex to the Decision, and

(d)landfill” has the meaning given in Article 2(g) of the Landfill Directive, but does not include any operation excluded from the scope of that Directive by Article 3(2) [F1or (3)].

(2) When interpreting F2... the Decision for the purposes of this Schedule—

(a)an expression that is defined in Part 1 of these Regulations has the meaning given in that Part,

F3(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F3(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(d)PAHs (polycyclic aromatic hydrocarbons)” means Naphthalene, Acenaphthylene, Acenaphthene, Anthracene, Benzo(a)anthracene, Benzo(b)fluoranthene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Chrysene, Coronene, Dibenzo(a,h)anthracene, Fluorene, Fluoranthene, Indeno(1,2,3-c,d)pyrene, Phenanthrene and Pyrene,

(e)permit” means environmental permit,

(f)SIC code” means the UK Standard Industrial Classification of Economic Activities 2007 (SIC 2007) published by the Office for National Statistics on 14th December 2007 and implemented on 1st January 2008 M2, and

(g)the competent authority is the regulator.

Textual Amendments

Marginal Citations

M1OJ No L 11, 16.1.2003, p 27.

M2See http://www.ons.gov.uk/ons/guide-method/classifications/current-standard-classifications/standard-industrial-classification/index.html. A copy may be obtained from the Waste Regulation Team, the Department for Environment, Food and Rural Affairs, Area 2B, Nobel House, 17 Smith Square, London SW1P 3JR.

Applications for the grant of an environmental permitE+W

3.  The regulator must require that every application for the grant of an environmental permit includes the information specified in Article 7 of the Landfill Directive.

Inspection prior to operationE+W

4.  The regulator must inspect every landfill site so as to comply with the requirements in Article 8(c) of the Landfill Directive.

Exercise of relevant functionsE+W

5.—(1) The regulator must exercise its relevant functions so as to ensure compliance with the following provisions of the Landfill Directive—

(a)Article 4;

(b)Article 5(3) and (4);

(c)Article 6;

(d)Article 8, but not in respect of nuisances and hazards arising from traffic beyond the site of a landfill;

(e)Article 9;

(f)Article 10;

(g)Article 11(1);

(h)Article 12;

(i)Article 13;

(j)Article 14.

(2) The regulator must exercise those relevant functions having regard to Article 1 of the Landfill Directive.

(3) The regulator must exercise those relevant functions so as to ensure compliance with the requirements imposed F4... by the following provisions of the Decision—

(a)Article 2;

(b)Article 3;

(c)Article 4.

(4) The regulator may exercise those relevant functions so as to permit the storage of metallic mercury in accordance with [F5Regulation (EU) 2017/852 of the European Parliament and of the Council on mercury].

F6(5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

[F7Waste separately collected for preparing for re-use and recycling not to be landfilledE+W

5A.(1) Every environmental permit which authorises a landfill is deemed to contain the following condition, unless such a condition to the same effect is included in the permit.

(2) The condition is that the operator must not accept—

(a)[F8any waste paper, metal, plastic or glass for landfill if that waste has been separately collected for the purpose of preparing for re-use or recycling; or] [F8in Wales, any waste paper, card, cartons, metal, plastic, glass, food, small electrical and electronic equipment or textiles for landfill if that waste has been separately collected for the purposes of preparing for re-use or recycling;]

[F9(aa)any waste wood; or]

(b)[F10any waste for landfill that results from the treatment of waste referred to in paragraph (a), unless] [F10in Wales, any waste for landfill that results from the treatment of waste referred to in paragraph (a) or (aa) unless]

(i)the relevant permit authorises the operator to accept that type of waste for landfill; and

(ii)landfill of that waste delivers the best environmental outcome in accordance with regulation 12 of the Waste (England and Wales) Regulations 2011.

[F11(3) For the purposes of this paragraph—

cartons” means fibre-based composite packaging, being packaging material which is made of paperboard or paper fibres, laminated with low density polythene or polypropylene plastic, and which may also have layers of other materials, to form a single unit that cannot be separated by hand;

electrical and electronic equipment” means equipment which is dependent on electric currents or electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields and designed for use with a voltage rating not exceeding 1,000 volts for alternating current and 1,500 volts for direct current;

small electrical and electronic equipment” means electrical and electronic equipment falling within one of the categories of EEE listed in Schedule 3 to the Waste Electrical and Electronic Equipment Regulations 2013, excluding items with any external dimension of more than 50 centimetres.]]

Interpretation of the Landfill Directive for the exercise of relevant functionsE+W

F126.  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Interpretation of the Decision Annex for the exercise of relevant functions: generalE+W

7.  When interpreting the Decision Annex for the purposes of paragraph 5(3)—

(a)in points 1.1.1 and 1.2, the periods referred to as to be defined or determined by the [F13appropriate authority] are in each case 2 years,

(b)point 1.1.2(b) is to be read as requiring the SIC code of the process producing the waste to be part of the information referred to,

(c)in point 1.1.2(g), ignore the words “in case of mirror entries”,

(d)ignore the third sentence of section 2,

(e)in points 2.1.2.1, 2.2.2, 2.3.1 and 2.4.1 the table columns headed “L/S = 10 l/kg” must be used to determine limit values,

(f)in the table in point 2.1.2.2, the limit value for PAHs (polycyclic aromatic hydrocarbons) is set at 100mg/kg,

(g)in point 2.2.3, the first reference to “gypsum-based materials” is to be read as “gypsum-based and other high sulphate-bearing materials”,

(h)in point 2.3.3, the first reference to “suitable asbestos waste” is to be read as “suitable materials”, and

(i)in the table in point 2.4.1, the limit values are subject to the qualification that the regulator may include conditions in an environmental permit authorising limit values for specific parameters (other than Dissolved Organic Carbon) up to 3 times higher than those listed for specified wastes accepted at a landfill, taking into account the characteristics of the landfill and its surroundings and provided a risk assessment demonstrates that emissions (including leachate) from the landfill will present no additional risk to the environment.

Interpretation of the Decision Annex for the exercise of relevant functions: additional acceptance criteria relating to physical stability and bearing capacity of granular wasteE+W

8.  When interpreting the Decision Annex for the purposes of paragraph 5(3)—

(a)in point 2.3.2, the criteria to ensure that granular waste will have sufficient physical stability and bearing capacity are that it has either—

(i)if it is cohesive waste, a mean in situ shear strength of at least 50kPa, or

(ii)if it is non-cohesive waste, an in situ bearing ratio of at least 5%;

(b)point 2.4.2 is to be read as if, in addition to the criteria listed, it requires the satisfaction of the criteria in paragraph (a)(i) and (a)(ii).

Interpretation of the Decision Annex for the exercise of relevant functions: additional acceptance criteria in relating to monolithic wasteE+W

9.  When interpreting the Decision Annex for the purposes of paragraph 5(3)—

(a)point 2.3.1 is to be read as if, in addition to the criteria listed, it requires the satisfaction of the following criteria in relation to stable, non-reactive monolithic hazardous waste and non-hazardous waste which is to be landfilled in the same cell with such waste—

(i)it meets either—

(aa)the limit values for leaching set out in the table in point 2.3.1, or

(bb)the limit values for leaching set out in the following table—

ComponentSymbolmg/m2
ArsenicAs1.3
BariumBa45
CadmiumCd0.2
Total ChromiumCrtotal5
CopperCu45
MercuryHg0.1
MolybdenumMo7
NickelNi6
LeadPb6
AntimonySb0.3
SeleniumSe0.4
ZincZn30
ChlorideCl-10,000
FluorideF-60
SulphateSO42-10,000
Dissolved Organic CarbonDOCMust be evaluated

(ii)it meets the additional criteria set out in the following table—

ParameterValue
pH of the eluate from the monolith or crushed monolithMust be evaluated
Electrical conductivity (µ S.cm-1m-2) of the eluate from the monolith or crushed monolithMust be evaluated
Acid Neutralisation Capacity (ANC) of the crushed monolithMust be evaluated

(iii)it has a mean unconfined compressive strength of at least 1Mpa after 28 days' curing,

(iv)it has either—

(aa)dimensions of greater than 40cm along each side, or

(bb)a depth and fracture spacing when hardened of greater than 40cm, and

(v)where the waste was subjected to treatment to render it monolithic, prior to such treatment it met the following limit value—

(aa)loss on ignition of 10%, or

(bb)total organic carbon of 6%;

(b)point 2.4.1 in the Decision Annex is to be read as if, in addition to the criteria listed, it requires the satisfaction of the following criteria in relation to monolithic waste to be accepted at a landfill for hazardous waste—

(i)it complies with paragraphs (a)(ii) to (a)(v), and

(ii)it meets either—

(aa)the limit values for leaching set out in the table in point 2.4.1, or

(bb)the limit values for leaching set out in the following table—

1 The regulator may include conditions in an environmental permit authorising limit values for specific parameters (other than Dissolved Organic Carbon) up to 3 times higher for specified wastes accepted in a landfill, taking into account the characteristics of the landfill and its surroundings and provided a risk assessment demonstrates that emissions (including leachate) from the landfill will present no additional risk to the environment.

ComponentSymbolmg/m21
ArsenicAs20
BariumBa150
CadmiumCd1
Total ChromiumCrtotal25
CopperCu60
MercuryHg0.4
MolybdenumMo20
NickelNi15
LeadPb20
AntimonySb2.5
SeleniumSe5
ZincZn100
ChlorideCl-20,000
FluorideF-200
SulphateSO42-20,000
Dissolved Organic CarbonDOCMust be evaluated

Closure of a landfillE+W

10.—(1) The regulator must set out any reasoned decision under Article 13(a)(iii) of the Landfill Directive in a closure notice served on the operator.

(2) A closure notice must, in addition to stating the regulator's reasons for requiring initiation of the closure procedure, specify—

(a)the steps the operator is required to take to initiate the procedure, and

(b)the period within which they must be taken.

(3) The regulator may withdraw a closure notice at any time by further notice served on the operator.

(4) Closure of a landfill does not relieve the operator of liability under the conditions of the environmental permit.

Surrender applicationsE+W

11.  When determining an application for the surrender, in whole or in part, of an environmental permit, the regulator must exercise its functions so as to ensure the operator complies with the requirements in Article 13(d) of the Landfill Directive.

Back to top

Options/Help

Print Options

You have chosen to open The Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Instrument as a PDF

The Whole Instrument you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources