There are outstanding changes not yet made by the legislation.gov.uk editorial team to The Traffic Signs Regulations and General Directions 2016. Any changes that have already been made by the team appear in the content and are referenced with annotations.
8. In relation to each aspect of performance specified in column 2 of an item in the table below, a cone or cylinder must comply with the requirement or test specification of British Standard BS EN 13422:2004+A1:2009 specified in column 3.E+W+S
(1) Item | (2) Aspect of performance | (3) Requirement or test specification and class |
|---|---|---|
| 1 | Daylight chromaticity co-ordinates and luminance factors | Retroreflective material: Class LB in Table 2 |
| Non-retroreflective exterior surfaces: Table 3.A | ||
| Non-retroreflective interior surfaces : Table 3.B | ||
| 2 | Coefficient of retroreflection | Dry conditioned : Class R1B or R2B in Table 4.B |
| Wet conditions: Class WT1 in Table 6 | ||
| 3 | Height and minimum weight (cones) | Class W3 in Table 1 |
Commencement Information
I1Sch. 13 Pt. 8 para. 8 in force at 22.4.2016, see reg. 1(b)
All content is available under the Open Government Licence v3.0 except where otherwise stated. This site additionally contains content derived from EUR-Lex, reused under the terms of the Commission Decision 2011/833/EU on the reuse of documents from the EU institutions. For more information see the EUR-Lex public statement on re-use.
