PART 4Monitoring of water supplies
Interpretation and application of Part 45
F21
In this Part, “monitoring of a Group A parameter” means monitoring of a Group A parameter for the purpose of obtaining information at regular intervals—
a
as to the organoleptic and microbiological quality of water;
b
where relevant, as to the effectiveness of drinking water treatment, particularly for the purposes of disinfection, for the purposes referred to in paragraph (2); and
c
as regards indicator parameters, whether water supplied for regulation 4(1) purposes meets the specifications for those parameters.
F22
A Group A parameter must be monitored to determine whether its presence in water supplied for regulation 4(1) purposes satisfies the provisions of Part 3 or, if a departure has been authorised under Part 7 in relation to that supply, the provisions of Part 3 as read with the terms of that departure.
F23
In this Part, “monitoring of a Group B parameter” means monitoring of a Group B parameter for the purpose of obtaining information from which it may be established whether water supplied for regulation 4(1) purposes—
a
satisfies the provisions of Part 3 or, if a departure has been authorised under Part 7 in relation to that supply, the provisions of Part 3 as read with the terms of that departure;
b
meets the specifications for indicator parameters;
c
in respect of other parameters identified as relevant by the Secretary of State under regulation 9, meets the specifications for those parameters.
4
This Part applies to water supplied for regulation 4(1) purposes by a relevant supplier in the performance of its duties under Chapter 3.
5
Regulations 6 to 10 apply to a F1wholesale licensee in relation to samples taken from supply points as they apply to a water undertaker, but only insofar as the F1wholesale licensee is introducing water into a water supply zone in which the water undertaker takes samples under this Part (to the extent authorised by or under regulation 8) from supply points.
F36
In this regulation—
“Group A parameter” means a parameter specified in column 2 of Table 1 in Schedule 3;
“Group B parameter” means a parameter specified in column 2 of Table 2 or, as the case may be, Table 3 in Schedule 3.