PART 3CONFORMITY OF THE PRODUCT AND CONFORMITY ASSESSMENT PROCEDURES

Design and construction44

1

With regard to the design and construction of recreational craft, the following conformity assessment procedures set out in Annex II to Decision 768/2008/EC apply—

a

for design categories A and B referred to in paragraph 1 of Part A of Schedule 1—

i

for recreational craft of hull length from 2.5 metres to less than 12 metres, any of the following modules—

aa

Module A1 (internal production control plus supervised product testing);

bb

Module B (EU-type examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);

cc

Module G (conformity based on unit verification);

dd

Module H (conformity based on full quality assurance);

ii

for recreational craft of hull length from 12 metres to less than 24 metres, any of the following modules—

aa

Module B (EU-type examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);

bb

Module G (conformity based on unit verification);

cc

Module H (conformity based on full quality assurance);

b

for design category C referred to in paragraph 1 of Part A of Schedule 1—

i

for recreational craft of hull length from 2.5 metres to less than 12 metres where the harmonised standards relating to paragraphs 3.2 and 3.3 of Part A of Schedule 1 are complied with, any of the following modules—

aa

Module A (internal production control);

bb

Module A1 (internal production control plus supervised product testing);

cc

Module B (EU type-examination together with Module C (conformity to type based on internal production control)), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);

dd

Module G (conformity based on unit verification);

ee

Module H (conformity based on full quality assurance);

ii

for recreational craft of hull length from 2.5 metres to less than 12 metres where the harmonised standards relating to paragraphs 3.2 and 3.3 of Part A of Schedule 1 are not complied with, any of the following modules—

aa

Module A1 (internal production control plus supervised testing);

bb

Module B (EU type-examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification;

cc

Module G (conformity based on unit verification);

dd

Module H (conformity based on full quality assurance);

iii

for recreational craft of hull length from 12 metres to 24 metres, any of the following modules—

aa

Module B (EU type-examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification;

bb

Module G (conformity based on unit verification);

cc

Module H (conformity based on full quality assurance);

c

for design category D referred to in paragraph 1 of Part A of Schedule 1 for recreational craft of hull length of 2.5 metres to 24 metres, any of the following modules—

i

Module A (internal production control);

ii

Module A1 (internal production control plus supervised testing);

iii

Module B (EU- type examination together with Module C (conformity to type based on internal production control)), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);

iv

Module G (conformity based on unit verification);

v

Module H (conformity based on full quality assurance).

2

With regard to the design and construction of personal watercraft, any of the following procedures set out in Annex II to Decision 768/2008/EC apply—

a

Module A (internal production control);

b

Module A1 (internal production control plus supervised testing);

c

Module B (EU type-examination together with Module C conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);

d

Module G (conformity based on unit verification);

e

Module H (conformity based on full quality assurance).

3

With regard to the design and construction of components any of the following procedures set out in Annex II to Decision 768/2008/EC apply—

a

Module B (EU type-examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on quality product assurance) or Module F (conformity to type based on product verification);

b

Module G (conformity based on unit verification);

c

Module H (conformity based on full quality assurance).