PART 3CONFORMITY OF THE PRODUCT AND CONFORMITY ASSESSMENT PROCEDURES

Exhaust emissionsI1E145

With regard to exhaust emissions, for products referred to in regulation 3(1)(d) and (e), the engine manufacturer must apply the following procedures set out in F1Schedule 15—

a

where the tests are conducted using the F2designated standard, any of the following modules—

i

Module B F4(type examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);

ii

Module G (conformity based on unit verification);

iii

Module H (conformity based on full quality assurance);

b

where the tests are conducted without using the F3designated standard, either of the following modules—

i

Module B F5(type examination) together with Module C1 (conformity to type based on internal production control plus supervised product testing);

ii

Module G (conformity based on unit verification).

Exhaust emissionsI2E245

With regard to exhaust emissions, for products referred to in regulation 3(1)(d) and (e), the engine manufacturer must apply the following procedures set out in Annex II to Decision 768/2008/EC—

a

where the tests are conducted using the harmonised standard, any of the following modules—

i

Module B (EU-type examination) together with Module C (conformity to type based on internal production control), Module D (conformity to type based on quality assurance of the production process), Module E (conformity to type based on product quality assurance) or Module F (conformity to type based on product verification);

ii

Module G (conformity based on unit verification);

iii

Module H (conformity based on full quality assurance);

b

where the tests are conducted without using the harmonised standard, either of the following modules—

i

Module B (the EU- type examination) together with Module C1 (conformity to type based on internal production control plus supervised product testing);

ii

Module G (conformity based on unit verification).