- Latest available (Revised)
- Original (As made)
The Payment Services Regulations 2017, SCHEDULE 3 is up to date with all changes known to be in force on or before 14 January 2025. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations.
Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.
Regulations 6(3) and 22(1)
Modifications etc. (not altering text)
C1Sch. 3 excluded (20.11.2018) by The Electronic Money, Payment Services and Payment Systems (Amendment and Transitional Provisions) (EU Exit) Regulations 2018 (S.I. 2018/1201), reg. 1(2), Sch. 3 para. 19(1)(c) (with reg. 4)
1. For the purposes of this Part, “initial capital” comprises one or more of the items specified in Article 26(1)(a) to (e) of the capital requirements regulation.U.K.
2.—(1) The amount of initial capital referred to in regulations 6(3) (conditions for authorisation) and 22(1)(a) (capital requirements) is the amount specified in the second column of the table, corresponding to the payment services provided or to be provided as specified in the first column.U.K.
(2) Where payment services in more than one row of the table are provided or to be provided, the amount of initial capital is the greater of the corresponding amounts in the second column.
Payment services | Initial capital requirement (euros) |
---|---|
Services specified in paragraph 1(h) of Schedule 1 | None |
Services specified in paragraph 1(f) of Schedule 1 (money remittance) | 20,000 |
Services specified in paragraph 1(g) of Schedule 1 (payment initiation services) | 50,000 |
Services specified in paragraph 1(a) to (e) of Schedule 1 | 125,000 |
3. The amount of own funds referred to in regulation 22(1)(b) is to be calculated in accordance with such of Method A, Method B or Method C (set out in paragraphs 8 to 10) as the FCA may direct.U.K.
4. The FCA may direct that an authorised payment institution must hold own funds up to 20% higher, or up to 20% lower, than the amount which would result from paragraph 3.U.K.
5. A direction made under paragraph 4 must be on the basis of an evaluation of the relevant authorised payment institution including, if available and where the FCA considers it appropriate, any risk-management processes, risk loss database or internal control mechanisms of the authorised payment institution.U.K.
6. The FCA may make a reasonable charge for making an evaluation required under paragraph 5.U.K.
7. If an authorised payment institution has not completed a full financial year's business, references to a figure for the preceding financial year are to be read as the equivalent figure projected in the business plan provided in the payment institution's application for authorisation, subject to any adjustment to that plan required by the FCA.U.K.
8.—(1) “Method A” means the calculation method set out in this paragraph.U.K.
(2) The own funds requirement is 10% of the authorised payment institution's fixed overheads for the preceding financial year.
(3) If a material change has occurred in an authorised payment institution's business since the preceding financial year, the FCA may direct that the own funds requirement is to be a higher or lower amount than that calculated in accordance with sub-paragraph (2).
9.—(1) “Method B” means the calculation method set out in this paragraph.U.K.
(2) The own funds requirement is the sum of the following elements multiplied by the scaling factor—
(a)4% of the first 5,000,000 euros of payment volume;
(b)2.5% of the next 5,000,000 euros of payment volume;
(c)1% of the next 90,000,000 euros of payment volume;
(d)0.5% of the next 150,000,000 euros of payment volume; and
(e)0.25% of any remaining payment volume.
(3) “Payment volume” means the total amount of payment transactions executed by the authorised payment institution in the preceding financial year divided by the number of months in that year.
(4) The “scaling factor” is—
(a)0.5 for a payment institution that is authorised to provide only the payment service specified in paragraph 1(f) of Schedule 1 (money remittance); and
(b)1 for a payment institution that is authorised to provide any other payment service specified in paragraph 1(a) to (e) of Schedule 1.
10.—(1) “Method C” means the calculation method set out in this paragraph.U.K.
(2) The own funds requirement is the relevant indicator multiplied by—
(a)the multiplication factor; and
(b)the scaling factor;
subject to the proviso in sub-paragraph (7).
(3) The “relevant indicator” is the sum of the following elements—
(a)interest income;
(b)interest expenses;
(c)gross commissions and fees received; and
(d)gross other operating income.
(4) For the purpose of calculating the relevant indicator—
(a)each element must be included in the sum with its positive or negative sign;
(b)income from extraordinary or irregular items must not be used;
(c)expenditure on the outsourcing of services rendered by third parties may reduce the relevant indicator if the expenditure is incurred from a payment service provider;
(d)the relevant indicator is calculated on the basis of the twelve-monthly observation at the end of the previous financial year;
(e)the relevant indicator must be calculated over the previous financial year; and
(f)audited figures must be used unless they are not available in which case business estimates may be used.
(5) The “multiplication factor” is the sum of—
(a)10% of the first 2,500,000 euros of the relevant indicator;
(b)8% of the next 2,500,000 euros of the relevant indicator;
(c)6% of the next 20,000,000 euros of the relevant indicator;
(d)3% of the next 25,000,000 euros of the relevant indicator; and
(e)1.5% of any remaining amount of the relevant indicator.
(6) “Scaling factor” has the meaning given in paragraph 9(4).
(7) The proviso is that the own funds requirement must not be less than 80% of the average of the previous three financial years for the relevant indicator.
11. Except where this Schedule provides for a different method of recognition, measurement or valuation, whenever a provision in this Schedule refers to an asset, liability, equity or income statement item, an authorised payment institution must, for the purpose of that provision, recognise the asset, liability, equity or income statement item and measure its value in accordance with whichever of the following are applicable for the purpose of the institution's external financial reporting—U.K.
(a)Financial Reporting Standards and Statements of Standard Accounting Practice issued or adopted by the Financial Reporting Council Limited;
(b)Statements of Recommended Practice, issued by industry or sectoral bodies recognised for this purpose by the Financial Reporting Council Limited;
(c)International Financial Reporting Standards and International Accounting Standards issued or adopted by the International Accounting Standards Board;
(d)International Standards on Auditing (United Kingdom and Ireland) issued by the Financial Reporting Council Limited or a predecessor body;
(e)the Companies Act 2006.
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download.
Would you like to continue?
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: