- Latest available (Revised)
- Point in Time (16/11/2022)
- Original (As made)
Point in time view as at 16/11/2022.
There are currently no known outstanding effects for the The Renewable Heat Incentive Scheme Regulations 2018, Section 18.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
18.—(1) A plant meets the requirements set out in this regulation if it is certified under—
(a)the Microgeneration Certification Scheme M1 as installed in accordance with a relevant installation standard in that scheme; or
(b)a scheme—
(i)where installers are certified to that scheme's standards by a certification body or organisation accredited to F1... EN ISO/IEC 17065:2012 M2 [F2or a subsequent version of that standard];
(ii)where the plant is installed in accordance with the installation requirements applicable to the plant under that scheme on the plant's first commissioning date and which are equivalent to a relevant installation standard; and
(iii)which is equivalent to the Microgeneration Certification Scheme.
(2) In paragraph (1), if the first commissioning date for the plant is on or after the date on which these Regulations come into force, “relevant installation standard” means—
(a)where the plant generates heat from solid biomass or solid biomass contained in waste, version 4.2 of the document entitled “Microgeneration Installation Standard: MIS 3004 requirements for MCS contractors undertaking the supply, design, installation, set to work, commissioning and handover of solid biofuel heating systems” published on 6th May 2015 M3 [F3or a subsequent version of that standard];
(b)where the plant is a ground source heat pump or [F4air source heat pump—
(i)Issue 1.0 of the document entitled “Microgeneration Installation Standard: MIS 3005-D The Heat Pump Standard (Design)”, published on 1st December 2021, or a subsequent version of that standard; and
(ii)Issue 1.0 of the document entitled “Microgeneration Installation Standard: MIS 3005-I The Heat Pump Standard (Installation)”, published on 1st December 2021, or a subsequent version of that standard; or]
(c)where the plant generates heat using a solar collector, [F5Issue 5.0 of the document entitled “Microgeneration Installation Standard: MIS 3001 The Solar Thermal Standard (Installation)”, published on 1st December 2021, or a subsequent version of that standard].
(3) In paragraph (1), if the first commissioning date for the plant is earlier than the date on which these Regulations come into force, “relevant installation standard” means any installation requirements applicable to the plant under the Microgeneration Certification Scheme, or an equivalent scheme, on the plant's first commissioning date.
Textual Amendments
F1Words in reg. 18(1)(b)(i) omitted (1.4.2022) by virtue of The Domestic Renewable Heat Incentive Scheme and Renewable Heat Incentive Scheme (Amendment) Regulations 2022 (S.I. 2022/159), regs. 1(3), 38(a)(i)
F2Words in reg. 18(1)(b)(i) inserted (1.4.2022) by The Domestic Renewable Heat Incentive Scheme and Renewable Heat Incentive Scheme (Amendment) Regulations 2022 (S.I. 2022/159), regs. 1(3), 38(a)(ii)
F3Words in reg. 18(2)(a) inserted (1.4.2022) by The Domestic Renewable Heat Incentive Scheme and Renewable Heat Incentive Scheme (Amendment) Regulations 2022 (S.I. 2022/159), regs. 1(3), 38(b)
F4Words in reg. 18(2)(b) substituted (1.4.2022) by The Domestic Renewable Heat Incentive Scheme and Renewable Heat Incentive Scheme (Amendment) Regulations 2022 (S.I. 2022/159), regs. 1(3), 38(c)
F5Words in reg. 18(2)(c) substituted (1.4.2022) by The Domestic Renewable Heat Incentive Scheme and Renewable Heat Incentive Scheme (Amendment) Regulations 2022 (S.I. 2022/159), regs. 1(3), 38(d)
Marginal Citations
M1Details of which are available at www.microgenerationcertification.org
M2The ISBN for the English language version of this standard is ISBN 978 0 580 78472 9. This standard was published by the British Standards Institution on 31st October 2012 and copies, including hard copies, can be obtained at www.bsigroup.com.
M3Published on www.microgenerationcertification.org.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: