- Latest available (Revised)
- Point in Time (22/05/2018)
- Original (As made)
Version Superseded: 01/04/2022
Point in time view as at 22/05/2018.
There are currently no known outstanding effects for the The Renewable Heat Incentive Scheme Regulations 2018, SCHEDULE 1.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 6(c)
1. The name and address of the testing laboratory by which tests have been carried out.E+W+S
2. The name and signature of the person authorised by the testing laboratory to issue the certificate.E+W+S
3. The date of issue of the certificate together with a certificate reference number.E+W+S
4. Where the testing laboratory is accredited to BS EN ISO/IEC 17025:2005 M1—E+W+S
(a)the date of that accreditation; and
(b)the accreditation number.
Marginal Citations
M1The ISBN for the English language version of this standard is ISBN 0 580 46330 3. This standard was published by the British Standards Institution on 29th June 2005 and copies, including hard copies, can be obtained at www.bsigroup.com.
5. The name, model, manufacturer and installation capacity of the plant tested.E+W+S
6. The date of the testing.E+W+S
7. Confirmation that emissions of NOₓ and PM have been tested on the same occasion in accordance with the requirements specified in paragraph 8 or 9.E+W+S
8. The requirements of this paragraph are that testing is carried out in accordance with the provisions relevant to emissions of PM and NOₓ in either BS EN 303-5:1999 M2 or BS EN 303-5:2012 M3, whichever standard is current at the time of testing.E+W+S
Marginal Citations
M2The ISBN for the English language version of this standard is ISBN 0 580 32356 0. This standard was published by the British Standards Institution on 15th November 1999 and copies, including hard copies, can be obtained at www.bsigroup.com.
M3The ISBN for the English language version of this standard is ISBN 978 0 580 71785 7. This standard was published by the British Standards Institution on 31st August 2012 and copies, including hard copies, can be obtained at www.bsigroup.com.
9. The requirements of this paragraph are that—E+W+S
(a)testing is carried out in accordance with—
(i)BS EN 14792:2005 M4 in respect of NOₓ emissions; and
(ii)BS EN 13284-1:2002 M5 or BS ISO 9096:2003 M6 in respect of PM emissions;
(b)the emissions of PM represent the average of at least three measurements of emissions of PM, each of at least 30 minutes duration; and
(c)the value for NOₓ emissions is derived from the average of measurements made throughout the PM emission tests.
Marginal Citations
M4The ISBN for the English language version of this standard is ISBN 0 580 46990 5. This standard was published by the British Standards Institution on 4th January 2006 and copies, including hard copies, can be obtained at www.bsigroup.com.
M5The ISBN for the English language version of this standard is ISBN 0 580 38920 0. This standard was published by the British Standards Institution on 25th January 2002 and copies, including hard copies, can be obtained at www.bsigroup.com.
M6The ISBN for the English language version of this standard is ISBN 0 580 41276 8. This standard was published by the British Standards Institution on 24th February 2003 and copies, including hard copies, can be obtained at www.bsigroup.com.
10. Confirmation that the test was carried out at no less than 85% of the installation capacity of the plant.E+W+S
11. Confirmation that when tested as specified in paragraphs 7 to 10—E+W+S
(a)emissions of PM from the plant did not exceed 30 grams of PM per gigajoule net heat input; and
(b)emissions of NOₓ did not exceed 150 grams of NOₓ per gigajoule net heat input.
12. The actual emissions of PM and NOₓ measured when the plant was tested as specified in paragraphs 7 to 10.E+W+S
13. A list of—E+W+S
(a)the types of fuel used during the testing; and
(b)the types of fuel which can be used so as to ensure that the emission limits referred to in paragraph 11 are not exceeded.
14. The moisture content of the fuel used during testing and the maximum moisture content which can be used so as to ensure that the emission limits referred to in paragraph 11 are not exceeded.E+W+S
15. A statement indicating whether or not the plant tested was a manually stoked natural draught plant.E+W+S
16. A list of plants, other than the plant tested, in the type-testing range of plants to which the certificate applies, if any.E+W+S
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: