PART 4AMENDMENTS TO PART 4 OF THE 2009 REGULATIONS: NATIONAL SMALL SERIES TYPE APPROVAL AND INDIVIDUAL APPROVAL
9
1
In Schedule 4 (technical and administrative requirements for grant of national small series type approval), Section 1 of Part 2 (requirements for vehicles of category M1) is amended as follows.
2
In item 2 of the table (emissions)—
a
for the heading “2. Emissions”, substitute “
2. Light Duty Emissions
”
;
b
in the first column—
i
in paragraph 3, for “Vehicles”, substitute “
Complete or Completed vehicles
”
.
ii
after paragraph 3 insert—
4. Complete or Completed vehicles manufactured after 1st December 2018: the technical provisions of Annex XXI to Regulation (EU) No. 2017/1151 (WLTP)
c
in the third column—
i
in paragraph 5 for “The requirements”, substitute “
In the case of a Completed vehicle, the requirements
”
;
ii
in paragraph 6, at the end, insert “
or aerodynamic performance
”
.
3
In item 3 of the table (fuel tanks / rear protective devices), in the first column, at the end of paragraph 1 insert—
Or
The technical provisions of Regulation (EC) No. 79/2009 or UNECE Regulation 134 for hydrogen.
4
Omit item 11 of the table (diesel smoke).
5
In item 41 of the table (diesel emissions)—
a
for the heading “41. Diesel Emissions”, substitute the heading “
41. Heavy Duty Emissions
”
;
b
in the first column, after paragraph 2, insert—
3. Complete or Completed vehicles manufactured on or after 1st September 2018: Regulation (EC) No. 595/2009 Annex I limit values
c
in the third column, in paragraph 3, for “For vehicles with a maximum mass equal to or exceeding 2500kg” substitute “
In the case of Completed vehicles
”
.
6
At the end of the table add the following item—
69. Electrical Safety
Vehicle: The technical provisions of UNECE Regulation 100.01