The Product Safety, Metrology and Mutual Recognition Agreement (Amendment) (EU Exit) Regulations 2019

Amendments to Schedule 35 U.K.

9.  In Schedule 35, in paragraph 1—

(a) in sub-paragraph (2)(a)—

(i) for “definitions” substitute “ definition ”;

(ii) omit the inserted definition of “the relevant period”;

(b) in sub-paragraph (3)—

(i) for paragraph (a) substitute—

“(a) at the beginning of paragraph (4) insert “ Subject to the modifications made in paragraph (4A), ””;

(ii) for paragraph (b) substitute—

“(b) after paragraph (4), insert—

“(4A) The modifications referred to in paragraph (4) are as follows—

(a) any reference to “Community” is to be read as including the United Kingdom;

(b) any reference to “Member State” is to be read as including the United Kingdom;

(c) in Schedule 7—

(i) in paragraph 5—

(aa) omit from “The Commission” to “conducted”;

(bb) before “file shall be held” insert “ manufacturer's technical ”;

(ii) in paragraph 6, omit from “An inspection body” to the end;

(d) in Schedule 10, in paragraph 2, omit from “with a view” to “the Commission”.”;

(iii) for paragraph (c) substitute—

“(c) in paragraph (5), at the end, insert “ of Regulation 2016/425 (pre-exit) or a declaration of conformity set out in paragraphs 7 or 8 of Annex IX ”;”;

(iv) omit paragraph (d);

(v) in paragraph (e) for “5A” substitute “ 5 ”;

(c) omit sub-paragraphs (8) and (9).

Commencement Information

I1 Reg. 9 in force at 31.12.2020 in force immediately before IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)