xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
12.—(1) Commission Delegated Regulation (EU) 2018/761 of 16 February 2018 establishing common safety methods for supervision by national safety authorities after the issue of a single safety certificate or a safety authorisation pursuant to Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 1077/2012 is amended as follows in respect of Northern Ireland.
(2) In Article 1 (subject matter) omit “referred to in point (c) of Article 6(1) of Directive (EU) 2016/798”.
(3) In Article 2 (definition)—
(a)omit point (a);
(b)after point (b), insert—
“(c)‘national safety authority’ has the meaning provided for “safety authority” in regulation 2 of the Railways (Safety Management) Regulations (Northern Ireland) 2006.”.
(4) In Article 3 (supervision process), for paragraph 3, substitute—
“3. For the purposes of supervision, the national safety authorities shall accept the authorisations, recognitions or certificates of products or services provided by railway undertakings and infrastructure managers, or their contractors, partners or suppliers, if granted or recognised in accordance with relevant legislation applying in any part of the United Kingdom on or after exit day, as proof of the ability of railway undertakings and infrastructure managers to fulfil any corresponding safety management system requirements set out in regulations 3(1)(a) and 4(1) to (3) of the Railways (Safety Management) Regulations (Northern Ireland) 2006.”.
(5) After Article 10, omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex I—
(a)in paragraph 5—
(i)before “The national safety authority shall” insert subparagraph number 1;
(ii)in the new subparagraph 1, at points (b) and (c), for “Member State” substitute “ geographical area of responsibility ” and, at point (e), omit “Agency acting as”;
(iii)after the new subparagraph 1, insert—
“2. For the purposes of subparagraph 1(e), “safety certification body” means the European Union Agency for Railways acting as a body responsible for issuing a single safety certificate under Article 10 of Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast) and “national safety authority” includes a safety authority established in a member State of the European Union under Article 16 of that Directive.”;
(b)in paragraph 6—
(i)in the introductory words, for “Member State” substitute “ a national ”;
(ii)in subparagraph (c), for “its Member State” substitute “ the Department for Infrastructure in Northern Ireland ”.
(7) Schedule 3 has effect.
Commencement Information
I1Reg. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)(d)