309. Commission Implementing Regulation (EU) No 1079/2012 of 16 November 2012 laying down requirements for voice channels spacing for the single European sky is amended in accordance with regulations 310 to 327.
Commencement Information
I1Reg. 309 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
310. In Article 2 (scope), in paragraph 3, for “Member States are” substitute “ the United Kingdom is ”.
Commencement Information
I2Reg. 310 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
311. In Article 3 (definitions), in point 6 after “given by” insert “ the CAA or ”.
Commencement Information
I3Reg. 311 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
312.—(1) Article 4 (interoperability and performance requirements of radio equipment) is amended as follows.
(2) In paragraph 1—
(a)after “or” insert “ if the manufacturer is not established in the United Kingdom ”,
(b)for “Union” substitute “ United Kingdom ”, and
(c)omit “from 17 November 2013”.
(3) In paragraph 3—
(a)for “Member States” substitute “ The CAA ”, and
(b)after “issued in the” insert “ United Kingdom or European ”.
(4) In paragraph 4 omit “from 17 November 2013”.
(5) In paragraph 5—
(a)for “Member States” substitute “ The CAA ”, and
(b)omit “by 31 December 2017 at the latest”.
Commencement Information
I4Reg. 312 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
313.—(1) Article 5 (obligations of operators) is amended as follows.
(2) In paragraph 2—
(a)for “From 1 January 2014 an” substitute “ An ”, and
(b)after “class A, B or C of the” insert “ under the responsibility of the United Kingdom or the ”.
(3) In paragraph 4 omit “from 1 January 2018”.
Commencement Information
I5Reg. 313 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
314.—(1) Article 6 (requirements on 8,33 kHz conversions) is amended as follows.
(2) In paragraph 1 for “Member States” substitute “ The CAA ”.
(3) In paragraph 2—
(a)for “Member States” substitute “ the CAA ”, and
(b)for “the Commission” substitute “ Eurocontrol ”.
(4) Omit paragraphs 3 to 7.
(5) In paragraph 8—
(a)for “Member States listed in Annex I” substitute “ The CAA ”, and
(b)omit “from 1 January 2015,”.
(6) In paragraph 9—
(a)for “Member States” substitute “ CAA ”, and
(b)for “Commission, by 31 December 2014 at the latest,” substitute “ Secretary of State ”.
(7) In paragraph 10—
(a)for “Member States” substitute “ The CAA ”, and
(b)omit “, by 31 December 2018 at the latest,”.
Commencement Information
I6Reg. 314 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
315. In Article 8 (associated procedures) omit paragraph 7.
Commencement Information
I7Reg. 315 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
316.—(1) Article 9 (arrangements for State aircraft) is amended as follows.
(2) In paragraph 1 for “Member States” substitute “ The Secretary of State ”.
(3) In paragraph 2—
(a)for “Member States” substitute “ the Secretary of State ”, and
(b)omit “by 31 December 2012 at the latest”.
(4) In each of paragraphs 3 and 4 for “Member States” substitute “ The Secretary of State ”.
(5) In paragraph 5—
(a)for “Member States” substitute “ the Secretary of State ”, and
(b)omit “by 31 December 2015 at the latest”.
(6) In paragraph 6—
(a)for “Member States” substitute “ The Secretary of State ”, and
(b)omit “from 1 January 2014”.
(7) In paragraph 7—
(a)for “Member States” substitute “ The Secretary of State ”, and
(b)omit “from 1 January 2014”.
(8) In paragraph 8—
(a)for “Member States” substitute “ The Secretary of State ”, and
(b)omit “by 31 December 2018 at the latest”.
(9) Omit paragraphs 9 and 10.
(10) In paragraph 13 for “Member States” substitute “ The CAA ”.
(11) In paragraph 14 for “Member State that has designated them” substitute “ CAA ”.
Commencement Information
I8Reg. 316 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
317. In Article 10 (safety requirements) for “Member States” substitute “ The CAA ”.
Commencement Information
I9Reg. 317 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
318. In Article 11 (conformity or suitability for use of constituents), in each of paragraphs 1 and 2, for “an EC” substitute “ a ”.
Commencement Information
I10Reg. 318 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
319.—(1) Article 12 (verification of systems) is amended as follows.
(2) In paragraph 1 for “their national supervisory authority” substitute “ the CAA ”.
(3) In paragraph 2 for “a notified” substitute “ an appointed ”.
(4) In paragraph 3 for “an EC” substitute “ a ”.
Commencement Information
I11Reg. 319 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
320.—(1) Article 13 (additional requirements) is amended as follows.
(2) In paragraph 1 for “Member States” substitute “ The CAA ”.
(3) Omit paragraphs 2 and 4.
(4) In paragraph 6 for “Member States” substitute “ The CAA ”.
Commencement Information
I12Reg. 320 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
321.—(1) Article 14 (exemptions) is amended as follows.
(2) In paragraph 1—
(a)for “the first paragraph of Article 4 of Commission Regulation (EC) No 730/2006,” substitute “ point SERA.5005(d)(2) of the Annex to Commission Implementing Regulation (EU) No 923/2012 ”, and
(b)for “Member States” substitute “ the CAA ”.
(3) In paragraph 2—
(a)for “Member States” substitute “ The CAA ”, and
(b)omit “local”.
(4) In paragraph 3—
(a)for “Member States” substitute “ The CAA, if ”,
(b)omit “local”, and
(c)for “the Commission” substitute “ Eurocontrol ”.
(5) Omit paragraph 4.
Commencement Information
I13Reg. 321 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
322. Omit Article 15 (repeal).
Commencement Information
I14Reg. 322 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
323. Omit Article 16 (entry into force).
Commencement Information
I15Reg. 323 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
324. After Article 16 omit the sentence which begins “This Regulation shall be binding”.
Commencement Information
I16Reg. 324 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
325.—(1) Annex 1 (Member States referred to in Articles 5 and 6) is amended as follows.
(2) In the heading for “Articles 5 and 6” substitute “ Article 5 ”.
(3) In the text before the indented list for “Articles 5(2), 6(3), 6(5) and 6(8)” substitute “ Article 5(2) ”.
(4) Omit the last indent (United Kingdom).
Commencement Information
I17Reg. 325 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
326.—(1) Annex 3 (requirements referred to in Article 10, to be taken into consideration during the safety assessment) is amended as follows.
(2) In point 4 omit “(2),”.
(3) In each of points 5 and 6 for “Member States” substitute “ The CAA ”.
(4) In point 9, for the words from “Member States” to “shall” substitute “ If the CAA converts frequency assignments to 8,33 kHz channel spacing in any part of the airspace under the responsibility of the United Kingdom it must: ”.
Commencement Information
I18Reg. 326 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
327.—(1) Annex 4 is amended as follows.
(2) In Part B (internal production control module)—
(a)in point 1—
(i)after “manufacturer or”, in both places those words occur, insert “ , if the manufacturer is not established in the United Kingdom ”, and
(ii)for “Union”, in both places it occurs, substitute “ United Kingdom ”,
(b)in point 2—
(i)for “He or his” substitute “The manufacturer, or if the manufacturer is not established in the United Kingdom, the manufacturer's”,
(ii)for “Union”, in both places it occurs, substitute “ United Kingdom ”,
(iii)for “relevant national supervisory authorities” substitute “ CAA ”,
(iv)after “manufacturer or” insert “ , if the manufacturer is not established in the United Kingdom ”, and
(v)for “Member States” substitute “ CAA ”,
(c)in point 3—
(i)for “Union”, in both places it occurs, substitute “ United Kingdom ”, and
(ii)for “Member States” substitute “ CAA ”, and
(d)in point 5 after “manufacturer or” insert “ , if the manufacturer is not established in the United Kingdom ”.
(3) In Part C (requirements for the verification of systems referred to in Article 12(1)), in point 7—
(a)omit “EC” in the first place it occurs, and
(b)for “national supervisory authority” substitute “ CAA ”.
(4) In Part D (requirements for the verification of systems referred to in Article 12(2))—
(a)in point 5 for “a notified” substitute “ an appointed ”,
(b)in each of points 6 to 8 for “notified” substitute “ appointed ”, and
(c)in point 9—
(i)omit “EC” in the first place it occurs, and
(ii)for “national supervisory authority” substitute “ CAA ”.
Commencement Information
I19Reg. 327 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)