140. Commission Regulation (EC) No 262/2009 of 30 March 2009 laying down requirements for the coordinated allocation and use of Mode S interrogator codes for the single European sky is amended in accordance with regulations 141 to 154.
Commencement Information
I1Reg. 140 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
141.—(1) Article 2 (definitions) is amended as follows.
(2) In point 11—
(a)omit “within the European Air Traffic Management Network”, and
(b)for “Member States” substitute “ States participating in that service ”.
(3) In point 13 for “Member States” substitute “ States participating in that service ”.
(4) In point 19(a) for “Regulation (EC) No 2096/2005” substitute “ Implementing Regulation (EU) No 1035/2011, as that Regulation has effect in EU law as amended from time to time M1 ”.
(5) At the end insert—
“25. “third country” means a country or territory other than:
(a)the United Kingdom, or
(b)a Member State.”.
Commencement Information
I2Reg. 141 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Marginal Citations
M1OJ L 271, 18.10.2011, p. 23.
142.—(1) Article 4 (associated procedures for Mode S operators) is amended as follows.
(2) In paragraph 1 after “from” insert “ the CAA or ”.
(3) In paragraph 2—
(a)for “competent Member State” substitute “ CAA ”, and
(b)at the end insert “ , unless a Member State is the competent Member State in relation to the operator ”.
(4) In paragraph 4—
(a)after “operators” insert “ that have received an interrogator code allocation from the CAA ”, and
(b)for “competent Member State” substitute “ CAA ”.
Commencement Information
I3Reg. 142 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
143.—(1) Article 5 (associated procedures for Member States) is amended as follows.
(2) In the heading for “Member States” substitute “ the CAA ”.
(3) In paragraph 1 for “Member States” substitute “ The CAA ”.
(4) In paragraph 2—
(a)in the words before point (a) for “Member States” substitute “ The CAA ”,
(b)in point (c)(ii) for “Member States” substitute “ CAA if the United Kingdom is ”, and
(c)in point (c)(iv)—
(i)for “Member States” substitute “ the CAA ”, and
(ii)omit “national”.
(5) Omit paragraphs 3 and 4.
(6) In paragraph 5—
(a)for “Member States referred to in paragraph 3” substitute “ The CAA ”,
(b)for “their” substitute “the United Kingdom's”, and
(c)omit “other”.
(7) In paragraph 6 for “Member States referred to in paragraph 3” substitute “ The CAA ”.
(8) In paragraph 7—
(a)for “Member States” substitute “ The CAA ”, and
(b)omit “other”.
(9) In paragraph 8—
(a)for “a Member State” substitute “ the United Kingdom ”, and
(b)for “the Member State concerned” substitute “ the CAA ”.
Commencement Information
I4Reg. 143 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
144. In Article 7 (contingency requirements), in paragraph 3 for “competent Member State” substitute “ CAA ”.
Commencement Information
I5Reg. 144 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
145. In Article 8 (civil-military coordination), in each of paragraphs 1 to 3 for “Member States” substitute “ The Secretary of State ”.
Commencement Information
I6Reg. 145 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
146. In Article 9 (safety requirements), in paragraph 2 for “Member States” substitute “ The CAA ”.
Commencement Information
I7Reg. 146 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
147. In Article 10 (conformity assessment)—
(a)for “an EC” substitute “ a ”,
(b)after “, or” insert “ if the manufacturer is not established in the United Kingdom ”, and
(c)for “Community” substitute “ United Kingdom ”.
Commencement Information
I8Reg. 147 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
148. In Article 11 (verification of systems), in paragraph 2 for “a notified” substitute “ an appointed ”.
Commencement Information
I9Reg. 148 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
149. In Article 12 (additional requirements), in each of paragraphs 3 and 4 for “Member States” substitute “ The CAA ”.
Commencement Information
I10Reg. 149 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
150. Omit Article 13 (entry into force and application).
Commencement Information
I11Reg. 150 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
151. After Article 13 omit the sentence which begins “This Regulation shall be binding”.
Commencement Information
I12Reg. 151 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
152.—(1) Annex 2 is amended as follows.
(2) In Part A (requirements concerning the application for interrogator codes referred to in Articles 4(2), 5(1) and 5(2))—
(a)in point (a) for “competent Member State” substitute “ CAA ”, and
(b)omit point (b).
(3) In Part B (requirements concerning the allocation of interrogator codes referred to in Articles 2(10), 4(3) and 4(4)), in point (a) for “competent Member State” substitute “ CAA ”.
Commencement Information
I13Reg. 152 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
153.—(1) Annex 4 is amended as follows.
(2) In Part A (requirements for the assessment of the conformity or suitability for use of constituents of the systems referred to in Article 10), in point 2—
(a)after “manufacturer, or” insert “ if the manufacturer is not established in the United Kingdom ”, and
(b)for “Community” substitute “ United Kingdom ”.
(3) In Part B (internal production control module)—
(a)in point 1—
(i)after “manufacturer or”, in both places those words occur, insert “ , if the manufacturer is not established in the United Kingdom ”, and
(ii)for “Community”, in both places it occurs, substitute “ United Kingdom ”,
(b)in point 2—
(i)for “he or his” substitute “the manufacturer, or if the manufacturer is not established in the United Kingdom the manufacturer's”,
(ii)for “Community”, in both places it occurs, substitute “ United Kingdom ”,
(iii)for “relevant national supervisory authorities” substitute “ CAA ”,
(iv)after “The manufacturer or” insert “ , if the manufacturer is not established in the United Kingdom ”, and
(v)for “Member States” substitute “ CAA ”, and
(c)in point 3—
(i)for “Community”, in both places it occurs, substitute “ United Kingdom ”, and
(ii)for “Member States” substitute “ CAA ”.
Commencement Information
I14Reg. 153 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
154.—(1) Annex 6 is amended as follows.
(2) In Part A (requirements for the verification of systems referred to in Article 11(1)), in point 7—
(a)omit “EC” in the first place it occurs, and
(b)for “national supervisory authority” substitute “ CAA ”.
(3) In Part B (requirements for the verification of systems referred to in Article 11(2))—
(a)in point 5 for “a notified” substitute “ an appointed ”,
(b)in each of points 6 to 8 for “notified” substitute “ appointed ”, and
(c)in point 9—
(i)omit “EC” in the first place it occurs, and
(ii)for “national supervisory authority” substitute “ CAA ”.
Commencement Information
I15Reg. 154 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)