- Latest available (Revised)
- Point in Time (29/03/2019)
- Original (As made)
No versions valid at: 29/03/2019
Point in time view as at 29/03/2019. This version of this schedule contains provisions that are not valid for this point in time.
There are currently no known outstanding effects for the The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, SCHEDULE 3.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Valid from 31/12/2020
Regulation 5
1. The Energy Information Regulations 2011 M1 are amended as follows.
Commencement Information
I1Sch. 3 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
Marginal Citations
M1S.I. 2011/1524, amended by S.I. 2012/2897, S.I. 2012/3005, S.I. 2013/1232, S.I. 2014/1290, S.I. 2015/469, S.I. 2016/838 and S.I. 2018/255.
2.—(1) Regulation 2 (interpretation) is amended as follows.
(2) In paragraph (1)—
(a)omit the definition of “EU measure”;
(b)in the definition of “market surveillance authority”, omit “and”;
(c)after the definition of “market surveillance authority”, insert—
““product-specific measure” means in relation to a product mentioned in column 1 of the table in Schedule 1, the corresponding measure referred to in column 2 of that table; and”.
(3) In paragraph (2)—
(a)in sub-paragraph (a), for “an EU measure” substitute “ a product-specific measure ”;
(b)after sub-paragraph (c), for “that EU measure” substitute “ that product-specific measure ”.
Commencement Information
I2Sch. 3 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
3. In regulation 3 (scope), in paragraph (2)(a), for “a third country”, substitute “ outside the United Kingdom ”.
Commencement Information
I3Sch. 3 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
4.—(1) Regulation 4 (enforcement) is amended as follows.
(2) In paragraph (1)(d), for “Article 11(13) (procedure for the introduction and rescaling of labels)”, substitute “ Article 11B (duties placed on suppliers and dealers where labels are rescaled) ”.
(3) In paragraph (2)—
(a)for sub-paragraph (b) substitute—
“(b)Article 4(2), (6) and (8) (obligations of suppliers in relation to product information);”;
(b)in sub-paragraph (e), for “Article 11(13) (procedure for the introduction and rescaling of labels)”, substitute “ Article 11B (duties placed on suppliers and dealers where labels are rescaled) ”.
Commencement Information
I4Sch. 3 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
5. In regulation 6(a), for “EU measures”, substitute “ product-specific measures ”.
Commencement Information
I5Sch. 3 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
6. In Schedule 1 (EU measures)—
(a)in the heading, for “EU measures”, substitute “ Product-specific measures ”;
(b)in paragraph 1 for “EU measure”, substitute “ product-specific measure ”;
(c)in the heading to column 2 of the table, for “EU measure”, substitute “ Product-specific measure ”;
(d)in the heading to column 3 of the table, for “EU measure”, substitute “ product-specific measure ”;
(e)at the end, insert—
“2.—(1) In the table in paragraph 1, in Column 2 of the row relating to household combined washer-driers, the reference to Commission Directive 96/60/EC implementing Council Directive 92/75/EEC with regard to energy labelling of household combined washer-driers M2, is to be read as a reference to that Commission Directive as it had effect immediately before exit day, and subject to the modifications in subparagraph (2).
(2) The modifications referred to in subparagraph (1) are that the Commission Directive is to be read as if—
(a)in each place in which they occur, references to “harmonized standards” were references to “designated standards within the meaning of the Ecodesign for Energy-Related Products Regulations 2010”;
(b)in Article 1—
(i)for paragraph 2, there were substituted—
“2. The information required by this Directive must be measured in accordance with designated standards.”;
(ii)paragraph 3 were omitted;
(c)Article 3 were omitted;
(d)Article 4 were omitted;
(e)Article 6 were omitted;
(f)in Annex 1 (the label)—
(i)in paragraph 2, in Note 4—
(aa)the words from “Without prejudice” to “scheme” were omitted; and
(bb)after “Council Regulation (EEC) No 880/92” there were inserted “ of 23 March 1992 on a Community eco-label award scheme, before exit day ”;
(ii)in paragraph 2, for Note 12, there were substituted—
“(XII)Where manufacturers so choose, noise during washing, spinning and drying cycles using standard 60°C cotton washing cycle and ‘dry cotton’ drying cycle, determined in accordance with—
(a)EN 60704-3;
(b)EN 60704-2-4 for washing and spinning;
(c)EN 60704-2-6 for drying; or
(d)any relevant measurement standard maintained by a recognised standardisation body”; and
(iii)in paragraph 3, there were omitted the words from “The Secretary of the Committee” to the end; and
(g)in Annex 2 (the fiche)—
(i)in point 4—
(aa)the words from “Without prejudice” to “scheme” were omitted.
(bb)after “Regulation (EEC) No 880/92” there were inserted “ of 23 March 1992 on a Community eco-label award scheme, before exit day ”; and
(ii)for point 18, there were substituted—
“18. Where manufacturers so choose, noise during washing, spinning and drying cycles using standard 60°C cotton washing cycle and ‘dry cotton’ drying cycle, determined in accordance with—
(a)EN 60704-3;
(b)EN 60704-2-4 for washing and spinning;
(c)EN 60704-2-6 for drying; or
(d)any relevant measurement standard maintained by a recognised standardisation body.”.”
Commencement Information
I6Sch. 3 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
Marginal Citations
M2O.J. L 266, 18.10.1996, p. 1, as amended by Act concerning the conditions of accession of the Czech Republic, the Republic of Estonia, the Republic of Cyprus, the Republic of Latvia, the Republic of Lithuania, the Republic of Hungary, the Republic of Malta, the Republic of Poland, the Republic of Slovenia and the Slovak Republic and the adjustments to the Treaties on which the European Union is founded of 23 September 2003 (OJ L 236,23.9.2003, p. 33) and Commission Directive 2006/80/EC of 23 October 2006 adapting certain directives in the field of energy, by reason of the accession of Bulgaria and Romania (OJ L 362, 20.12.2006, p. 67).
7. In Schedule 2 (powers of entry and warrants), for paragraph 1(3)(a), substitute—
“(a)be accompanied by such other persons as the authorised person considers necessary; and”.
Commencement Information
I7Sch. 3 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
8. In Schedule 3 (testing), in each instance in paragraphs 2(1), 3(1) and (2)(a), and 6(a) for “an EU measure”, substitute “ a product-specific measure ”.
Commencement Information
I8Sch. 3 para. 8 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
9. In Schedule 4 (civil sanctions)—
(a)in paragraph 7(1), for “an EU measure” substitute “ a product-specific measure ”;
(b)in paragraph 13, in each instance in subparagraphs (1)(b), (2)(b)(ii) and (3) for “an EU measure”, substitute “ a product-specific measure ”.
Commencement Information
I9Sch. 3 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: