The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019

Amendment to Schedule 2 Part 2 Annex IIE+W+S

This section has no associated Explanatory Memorandum

24.—(1) Schedule 2 Part 2 Annex II (Declarations) is amended as follows.

(2) In Section 1 Part A (EC Declaration of conformity of the machinery)—

(a)in the heading and in the third paragraph omit “EC”;

(b)in point 2 omit “, who must be established in an EEA state”;

(c)in point 4—

(i)for “the Directive” substitute “ these Regulations ”;

(ii)for “Directives and/or” substitute “ enactments or ”;

[F1(d)in point 5—

(i)for “notified” substitute “ approved ”;

(ii)for “EC type-” substitute “ Type- ” in both places in which it occurs;]

[F2(da)in point 6 for “notified” substitute “ approved ”;]

(e)in point 7 for “published harmonised” substitute “ designated ”.

(3) in Section 1 Part B (declaration of incorporation of partly completely machinery)—

(a)in point 2 omit “, who must be established in an EEA state”;

(b)in point 4—

(i)for “Directives” substitute “ enactments ”;

(ii)omit “These references must be those of the texts published in the Official Journal of the European Union”;

(c)in point 6 for “the Directive” substitute “ these Regulations ”.

(4) In Section 2 (Custody) omit “EC” from the first paragraph.

Textual Amendments

Commencement Information

I1Sch. 12 para. 24 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1