xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
3. In regulation 3 (requirements for the marking of aerosol dispensers)—
[F1(a)in paragraph (1)—
(i)after “dispenser” insert “ or where paragraph (1A) applies, on a label affixed to, or a document accompanying, the aerosol dispenser ”;
(ii)for “a compliance mark” substitute “ the UK marking ”;]
[F2(aa)after paragraph (1) insert—
“(1A) For a period of 24 months beginning with IP completion day, the UK marking may be affixed to—
(a)a label affixed to the aerosol dispenser; or
(b)a document accompanying the aerosol dispenser.”;]
(b)in each place in which it occurs, for “the Annex to the Directive” substitute “ Schedule 1A ”;
(c)in paragraph (7)(b) after “6.1.3” insert “ of Schedule 1A ”;
(d)in paragraph (7)(c)—
(i)after “6.1.4.1(a)”, “6.1.4.1(b)” and “6.1.4.1(c)” (in paragraphs (i), (ii) and (iii) respectively), insert “ of Schedule 1A ”;
(ii)after “6.1.4.2” in both places in which it occurs insert “ of that Schedule ”;
(e)for paragraph (8)(a) substitute—
“(a)the following information—
(i)the name and address or trade mark of the person responsible for marketing the aerosol dispenser;
(ii)code markings enabling the filling batch to be identified;
(iii)the details referred to in point 2.2 of Schedule 1A; and
(iv)where an aerosol dispenser—
(aa)contains flammable components as defined in point 1.8 of Schedule 1A; and
(bb)is not classified as extremely flammable or flammable in accordance with the classifications set out in point 1.9 of Schedule 1A;
the quantity of flammable material contained in the aerosol dispenser must be clearly stated on the label in legible and indelible wording in the following form—“X % by mass of the contents are flammable”;”.
Textual Amendments
F1Sch. 13 para. 3(a) substituted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 8(2)(a)
F2Sch. 13 para. 3(aa) inserted (31.12.2020 immediately before IP completion day) by The Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020 (S.I. 2020/1460), reg. 1(4), Sch. 3 para. 8(2)(b)
Commencement Information
I1Sch. 13 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1