- Latest available (Revised)
- Point in Time (16/12/2022)
- Original (As made)
Version Superseded: 21/04/2023
Point in time view as at 16/12/2022.
There are currently no known outstanding effects for the The Russia (Sanctions) (EU Exit) Regulations 2019.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulations 7(3) and 16(8)
1.—(1) The rules set out in the following paragraphs of this Schedule apply for the purpose of interpreting regulations 7(2) and 16(7).
(2) They also apply for the purpose of interpreting this Schedule.
Commencement Information
I1Sch. 1 para. 1 in force at 11.4.2019, see reg. 1(3)(e)
2. If two or more persons each hold a share or right jointly, each of them is treated as holding that share or right.
Commencement Information
I2Sch. 1 para. 2 in force at 11.4.2019, see reg. 1(3)(e)
3.—(1) If shares or rights held by a person and shares or rights held by another person are the subject of a joint arrangement between those persons, each of them is treated as holding the combined shares or rights of both of them.
(2) A “joint arrangement” is an arrangement between the holders of shares or rights that they will exercise all or substantially all the rights conferred by their respective shares or rights jointly in a way that is pre-determined by the arrangement.
(3) “Arrangement” has the meaning given by paragraph 12.
Commencement Information
I3Sch. 1 para. 3 in force at 11.4.2019, see reg. 1(3)(e)
4.—(1) In relation to a person who has a share capital, a reference to holding “more than 50% of the shares” in that person is to holding shares comprised in the issued share capital of that person of a nominal value exceeding (in aggregate) 50% of that share capital.
(2) In relation to a person who does not have a share capital—
(a)a reference to holding shares in that person is to holding a right or rights to share in the capital or, as the case may be, profits of that person;
(b)a reference to holding “more than 50% of the shares” in that person is to holding a right or rights to share in more than 50% of the capital or, as the case may be, profits of that person.
Commencement Information
I4Sch. 1 para. 4 in force at 11.4.2019, see reg. 1(3)(e)
5.—(1) A reference to the voting rights in a person is to the rights conferred on shareholders in respect of their shares (or, in the case of a person not having a share capital, on members) to vote at general meetings of the person on all or substantially all matters.
(2) In relation to a person that does not have general meetings at which matters are decided by the exercise of voting rights—
(a)a reference to holding voting rights in the person is to be read as a reference to holding rights in relation to the person that are equivalent to those of a person entitled to exercise voting rights in a company;
(b)a reference to holding “more than 50% of the voting rights” in the person is to be read as a reference to holding the right under the constitution of the person to block changes to the overall policy of the person or to the terms of its constitution.
Commencement Information
I5Sch. 1 para. 5 in force at 11.4.2019, see reg. 1(3)(e)
6. In applying regulations 7(2) and 16(7) and this Schedule, the voting rights in a person are to be reduced by any rights held by the person itself.U.K.
Commencement Information
I6Sch. 1 para. 6 in force at 11.4.2019, see reg. 1(3)(e)
7. A reference to the right to appoint or remove a majority of the board of directors of a person is to the right to appoint or remove directors holding a majority of the voting rights at meetings of the board on all or substantially all matters.
Commencement Information
I7Sch. 1 para. 7 in force at 11.4.2019, see reg. 1(3)(e)
8. A reference to a board of directors, in the case of a person who does not have such a board, is to be read as a reference to the equivalent management body of that person.U.K.
Commencement Information
I8Sch. 1 para. 8 in force at 11.4.2019, see reg. 1(3)(e)
9.—(1) A person holds a share “indirectly” if the person has a majority stake in another person and that other person—
(a)holds the share in question, or
(b)is part of a chain of persons—
(i)each of whom (other than the last) has a majority stake in the person immediately below it in the chain, and
(ii)the last of whom holds the share.
(2) A person holds a right “indirectly” if the person has a majority stake in another person and that other person—
(a)holds that right, or
(b)is part of a chain of persons—
(i)each of whom (other than the last) has a majority stake in the person immediately below it in the chain, and
(ii)the last of whom holds that right.
(3) For these purposes, a person (“A”) has a “majority stake” in another person (“B”) if—
(a)A holds a majority of the voting rights in B,
(b)A is a member of B and has the right to appoint or remove a majority of the board of directors of B,
(c)A is a member of B and controls alone, pursuant to an agreement with other shareholders or members, a majority of the voting rights in B, or
(d)A has the right to exercise, or actually exercises, dominant influence or control over B.
(4) In the application of this paragraph to the right to appoint or remove a majority of the board of directors, a person (“A”) is to be treated as having the right to appoint a director if—
(a)any person's appointment as director follows necessarily from that person's appointment as director of A, or
(b)the directorship is held by A itself.
Commencement Information
I9Sch. 1 para. 9 in force at 11.4.2019, see reg. 1(3)(e)
10. A share held by a person as nominee for another is to be treated as held by the other (and not by the nominee).
Commencement Information
I10Sch. 1 para. 10 in force at 11.4.2019, see reg. 1(3)(e)
11.—(1) Where a person controls a right, the right is to be treated as held by that person (and not by the person who in fact holds the right, unless that person also controls it).
(2) A person “controls” a right if, by virtue of any arrangement between that person and others, the right is exercisable only—
(a)by that person,
(b)in accordance with that person's directions or instructions, or
(c)with that person's consent or concurrence.
Commencement Information
I11Sch. 1 para. 11 in force at 11.4.2019, see reg. 1(3)(e)
12. “Arrangement” includes—U.K.
(a)any scheme, agreement or understanding, whether or not it is legally enforceable, and
(b)any convention, custom or practice of any kind.
Commencement Information
I12Sch. 1 para. 12 in force at 11.4.2019, see reg. 1(3)(e)
13.—(1) Rights that are exercisable only in certain circumstances are to be taken into account only—
(a)when the circumstances have arisen, and for so long as they continue to obtain, or
(b)when the circumstances are within the control of the person having the rights.
(2) But rights that are exercisable by an administrator or by creditors while a person is subject to relevant insolvency proceedings are not to be taken into account while the person is subject to those proceedings.
(3) “Relevant insolvency proceedings” means—
(a)administration within the meaning of the Insolvency Act 1986 M1
(b)administration within the meaning of the Insolvency (Northern Ireland) Order 1989 M2, or
(c)proceedings under the insolvency law of another country during which a person's assets and affairs are subject to the control or supervision of a third party or creditor.
(4) Rights that are normally exercisable but are temporarily incapable of exercise are to continue to be taken into account.
Commencement Information
I13Sch. 1 para. 13 in force at 11.4.2019, see reg. 1(3)(e)
Marginal Citations
14. Rights attached to shares held by way of security provided by a person are to be treated for the purposes of this Schedule as held by that person—
(a)where apart from the right to exercise them for the purpose of preserving the value of the security, or of realising it, the rights are exercisable only in accordance with that person's instructions, and
(b)where the shares are held in connection with the granting of loans as part of normal business activities and apart from the right to exercise them for the purpose of preserving the value of the security, or of realising it, the rights are exercisable only in that person's interests.
Commencement Information
I14Sch. 1 para. 14 in force at 11.4.2019, see reg. 1(3)(e)
Regulations 16, 17 and 59
1. SberbankU.K.
Commencement Information
I15Sch. 2 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
2. VTB bankU.K.
Commencement Information
I16Sch. 2 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
3. GazprombankU.K.
Commencement Information
I17Sch. 2 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
4. Vnesheconombank (VEB)U.K.
Commencement Information
I18Sch. 2 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
5. RosselkhozbankU.K.
Commencement Information
I19Sch. 2 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
6. OPK OboronpromU.K.
Commencement Information
I20Sch. 2 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
7. United Aircraft CorporationU.K.
Commencement Information
I21Sch. 2 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
8. UralvagonzavodU.K.
Commencement Information
I22Sch. 2 para. 8 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
9. RosneftU.K.
Commencement Information
I23Sch. 2 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
10. TransneftU.K.
Commencement Information
I24Sch. 2 para. 10 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
11. Gazprom NeftU.K.
Commencement Information
I25Sch. 2 para. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Regulation 21
Textual Amendments
1.—(1) A thing is specified in this Schedule if it is specified in Parts [F21A] to 8, and a reference in any note in this Schedule to a thing being “controlled” or subject to “controls” is to be read as a reference to it being specified.
(2) In this Schedule, defined terms are printed in quotation marks.
(3) Terms printed in quotation marks and not defined in this Schedule have the meaning given to them in—
(a)Schedules 2 and 3 of the Export Control Order 2008, or
(b)Annex I of the Dual-Use Regulation,
as applicable.
Textual Amendments
F2Word in Sch. 2A para. 1(1) substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), reg. 1(2)(b), Sch. 3 para. 7
2.—(1) In this Schedule—
[F3“controlled materials” means controlled energetic materials specified in 1C011, 1C111, 1C239 of Annex I of the Dual-Use Regulation and ML8 in Schedule 2 to the Export Control Order 2008;]
“dynamic adaptive routing” means automatic rerouting of traffic based on sensing and analysis of current actual network conditions, but does not include cases of routing decisions taken on predefined information;
“fluoride fibres” means fibres manufactured from bulk fluoride compounds;
“hybrid computer” means equipment that can—
accept data,
process data, in both analogue and digital representation, and
provide output of data;
“media access unit” means equipment that contains one or more communication interfaces (“network access controller”, “communications channel controller”, modem or computer bus) to connect terminal equipment to a network;
“stored program controlled” means a control using instructions stored in an electronic storage that a processor can execute in order to direct the performance of predetermined functions, and equipment may be “stored program controlled” whether the electronic storage is internal or external to the equipment;
“terminal interface equipment” means equipment at which information enters or leaves the telecommunication systems, for example a telephone, data device, computer, or facsimile device.
(2) For the purposes of this Schedule, the interpretative notes set out in Table 1 apply.
Interpretative notes | |
---|---|
“multi-data-stream processing” refers to the “microprogram” or equipment architecture technique that permits simultaneous processing of two or more data sequences under the control of one or more instruction sequences by means such as: | |
Single Instruction Multiple Data (SIMD) architectures such as vector or array processors; Multiple Single Instruction Multiple Data (MSIMD) architectures; Multiple Instruction Multiple Data (MIMD) architectures, including those that are tightly coupled, closely coupled or loosely coupled; structured arrays of processing elements, including systolic arrays. | |
“data signalling rate” means the rate, as defined in International Telecommunications Union Recommendation 53-36, taking into account that, for non-binary modulation, baud and bit per second are not equal. Bits for coding, checking and synchronization functions are to be included. When determining the “data signalling rate”, servicing and administrative channels shall be excluded. It is the maximum one-way rate, i.e., the maximum rate in either transmission or reception. | |
“spectral efficiency” is a figure of merit parametrized to characterize the efficiency of transmission system that uses complex modulation schemes such as QAM (quadrature amplitude modulation), Trellis coding, QSPK (Q-phased shift key), etc.. It is defined as the Digital transfer rate (bits/second) divided by 6dB spectrum bandwidth (Hz). |
Textual Amendments
F3Words in Sch. 2A para. 2 inserted (15.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 11) Regulations 2022 (S.I. 2022/792), regs. 2, 12(2) (with reg. 13)
Textual Amendments
F4Sch. 2A Pts. 1A, 1B inserted (15.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 11) Regulations 2022 (S.I. 2022/792), reg. 1(2), Sch. 1 (with reg. 13)
Item | Regulation 53A applies? |
---|---|
1B999 Specific processing equipment as follows: | |
a. Electrolytic cells for fluorine “production”; | |
b. Particle accelerators; | |
c. Industrial process control hardware/systems designed for power industries; | |
d. Freon and chilled water-cooling systems capable of continuous cooling duties of 100,000 BTU/hr (29.3 kW) or greater; | |
e. Equipment for the “production” of structural composites, fibres, prepregs and preforms. | |
1C990 Fibrous and filamentary materials for “use” in “composite” structures and with a specific modulus of 3.18 x 106 m or greater and a specific tensile strength of 7.62 x 104 m or greater. | Yes |
1C992 Commercial charges and devices containing energetic materials, and nitrogen trifluoride in a gaseous state. | Yes |
Note: For the purposes of this entry the mass of the non-controlled substance in any ‘mixture’ is omitted when determining the total mass of the controlled material. | |
These items are as follows: a. Shaped charges specially designed for oil well operations, utilising one charge functioning along a single axis, that upon detonation produce a hole, and a.1. Contain any formulation of controlled materials; a.2. Have only a uniform shaped conical liner with an included angle of 90 degrees or less; a.3. Contain more than 0.010 kg but less than or equal to 0.090 kg of “controlled materials”; and a.4. Have a diameter not exceeding [F511.43 cm/] 4.5 inches; | Yes |
b. Shaped charges specially designed for oil well operations containing less than or equal to 0.010 kg of controlled materials; | Yes |
c. Detonation cord or shock tubes containing less than or equal to 0.064 kg per meter (300 grains per foot) of controlled materials; | Yes |
d. Cartridge power devices, that contain less than or equal to 0.70 kg of controlled materials in the deflagration material; | Yes |
e. Oil well cartridges, that contain less than or equal to 0.015 kg of “controlled materials”; | Yes |
f. Commercial prefabricated slurries and emulsions containing less than or equal to 10.0 kg and less than or equal to thirty-five percent by weight of materials controlled by ML8 in Schedule 2 of the Export Control Order 2008; | Yes |
g. Cutters and severing tools containing less than or equal to 3.5 kg of controlled materials; | Yes |
h. Pyrotechnic devices when designed exclusively for commercial purposes (e.g., theatrical stages, motion picture special effects, and fireworks displays) and containing less than or equal to 3.0 kg of controlled materials; | Yes |
i. Other commercial explosive devices and charges not controlled by 1C992.a to.h. containing less than or equal to 1.0 kg of controlled materials. Note: 1C992.i includes automotive safety devices; extinguishing systems; cartridges for riveting guns; explosive charges for agricultural, oil and gas operations, sporting goods, commercial mining, or public works purposes; and delay tubes used in the assembly of commercial explosive devices. | Yes |
j. Nitrogen trifluoride (NF3) in a gaseous state - Nitrogen trifluoride (CAS RN 7783-54-2) | |
1C996 Hydraulic fluids containing synthetic hydrocarbon oils, having all the following characteristics: | Yes |
a. A flash point exceeding 477 K (204 degrees C); b. A pour point at 239 K ( -34 degrees C) or less; c. A viscosity index of 75 or more; and d. A thermal stability at 616 K (343 degrees C). | |
1C997 Ammonium nitrate, including fertilisers and fertiliser blends containing more than 15% by weight ammonium nitrate, except liquid fertilisers (containing any amount of ammonium nitrate) or dry fertilisers containing less than 15% by weight ammonium nitrate | |
1C998 Non fluorinated polymeric substances as follows: a. Polyarylene ether ketones, as follows: a.1 Polyether ether ketone (PEEK); a.2. Polyether ketone ketone (PEKK); a.3. Polyether ketone (PEK); a.4. Polyether ketone ether ketone ketone (PEKEKK); | Yes |
1C999 Specific materials, as follows: | |
a. Hardened steel and tungsten carbide precision ball bearings (3mm or greater diameter); | Yes |
b. 304 and 316 stainless steel plate; | |
c. Monel plate; | |
d. Tributyl phosphate; | |
e. Nitric acid in concentrations of 20 weight percent or greater; | |
f. Fluorine; | |
g. Alpha emitting radionuclides, | |
[F6Aromatic polyamides (aramids) not controlled by 1C010, 1C210 or 1C990, presented in any of the following forms— | |
(a) primary forms; | |
(b) filament yarn or monofilaments; | |
(c) filament tows; | |
(d) rovings; | |
(e) staple or chopped fibres; | |
(f) fabrics; | |
(g) pulp or flocks. | |
Nanomaterials as follows— | |
(a) semiconductor nanomaterials; | |
(b) composite-based nanomaterials; | |
(c) any of the following carbon-based nanomaterials— | |
(i) carbon nanotubes; | |
(ii) carbon nanofibres; | |
(iii) fullerenes; | |
(iv) graphenes; | |
(v) carbon onions. | |
Notes: For the purpose of the entry above, “nanomaterial” means a material that meets at least one of the following criteria— | |
(a) it consists of particles, with one or more external dimensions in the size range 1 - 100 nm for more than 1 % of their number size distribution, | |
(b) it has internal or surface structures in one or more dimensions in the size range 1 - 100 nm, or | |
(c) it has a specific surface area by volume greater than 60 m2/cm3, excluding materials consisting of particles with a size lower than 1 nm.] | |
1D999 Specific software as follows: | |
a. “Software” specially designed for industrial process control hardware/systems controlled by 1B999; b. “Software” specially designed for equipment for the “production” of structural composites, fibres, prepregs and preforms controlled by 1B999. | |
1E994 “Technology” for the “development”, “production”, or “use” of fibrous and filamentary materials controlled by 1C990. | Yes |
[F7“Technology” “required” for the “development”, “production” or “use” of the systems, equipment, components and software specified in the entries above relating to aromatic polyamides and nanomaterials. ] |
Textual Amendments
F5Word in Sch. 2A Pt. 1A inserted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(2)
F6Words in Sch. 2A Pt. 1A inserted (16.12.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 17) Regulations 2022 (S.I. 2022/1331), reg. 1(2)(b), Sch. 1 para. 1
F7Words in Sch. 2A Pt. 1A inserted (16.12.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 17) Regulations 2022 (S.I. 2022/1331), reg. 1(2)(b), Sch. 1 para. 2
Item | Regulation 53A applies? |
---|---|
2A983 Explosives or detonator detection equipment, both bulk and trace based, consisting of an automated device, or combination of devices for automated decision making to detect the presence of different types of explosives, explosive residue, or detonators as follows and specifically designed components thereof: Note: For the purpose of this entry, automated decision making is the ability of the equipment to detect explosives or detonators at the design or operator-selected level of sensitivity and provide an automated alarm when explosives or detonators at or above the sensitivity level are detected. This entry does not control equipment that depends on operator interpretation of indicators such as inorganic/organic colour mapping of the items(s) being scanned. Note: Explosives or detonation detection equipment in 2A983 includes equipment for screening people, documents, baggage, other personal effects, cargo and/or mail. | |
a. Explosives detection equipment for automated decision making to detect and identify bulk explosives utilising, but not limited to, x-ray (e.g., computed tomography, dual energy, or coherent scattering), nuclear (e.g. thermal neutron analysis, pulse fast neutron analysis, pulse fast neutron transmission spectroscopy, and gamma resonance absorption), or electromagnetic techniques (e.g. quadropole resonance and dielectrometry). | Yes |
b. Detonator detection equipment for automated decision making to detect and identify initiation devices (e.g. detonators, blasting caps) utilising, but not limited to, x-ray (e.g. dual energy or computed tomography) or electromagnetic techniques. | Yes |
2A984 Concealed object detection equipment operating in the frequency range from 30 GHz to 3000 GHz and having a spatial resolution of 0.1 milliradian up to and including 1 milliradian at a standoff distance of 100 metres; and specially designed components thereof. Note: Concealed object detection equipment includes but is not limited to equipment for screening people, documents, baggage, other personal effects, cargo and mail. Technical Note: The range of frequencies span what is generally considered as the millimetre-wave, submillimetre-wave and terahertz frequency regions. | Yes |
2A991 Bearings and bearing systems as follows: | |
This entry does not control balls with tolerance specified by the manufacturer in accordance with ISO 3290 as grade 5 or worse. Note (1) (a) DN is the product of the bearing bore diameter in mm and the bearing rotational velocity in rpm. (b) Operating temperatures include those temperatures obtained when a gas turbine engine has stopped after operation. (2) Annular Bearing Engineers Committee (ABEC); American National Standards Institute (ANSI); Anti-Friction Bearing Manufacturers Association (AFBMA). | |
a. Ball bearings or solid ball bearings, having tolerances specified by the manufacturer in accordance with ABEC 7, ABEC 7P, or ABEC 7T or ISO Standard Class 4 or better (or equivalents) and having any of the following characteristics. | Yes |
a.1. Manufactured for “use” at operating temperatures above 573 K (300 degrees C) either by using special materials or by special heat treatment; or | |
a.2. With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2.3 million DN. | |
b. Solid tapered roller bearings, having tolerances specified by the manufacturer in accordance with ANSI/AFBMA Class 00 (inch) or Class A (metric) or better (or equivalents) and having any of the following characteristics. | |
b.1. With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2.3 million DN; or b.2. Manufactured for “use” at operating temperatures below 219 K (54 degrees C) or above 423 K (150 degrees C). | |
c. Gas-lubricated foil bearing manufactured for “use” at operating temperatures of 561 K (288 °C) or higher and a unit load capacity exceeding 1 MPa. | |
d. Active magnetic bearing systems. | Yes |
e. Fabric-lined self-aligning or fabric-lined journal sliding bearings manufactured for “use” at operating temperatures below 219 K(-54 degrees C) or above 423 K (150 degrees C). | |
2A992 Piping, fittings and valves made of, or lined with stainless, copper-nickel alloy or other alloy steel containing 10% or more nickel and/or chromium as follows: | |
a. Pressure tube, pipe, and fittings of 200 mm (8 in.) or more inside diameter, and suitable for operation at pressures of 3.4 MPa (500 psi) or greater; | |
b. Pipe valves having all of the following characteristics that are not controlled by 2B350.g of Annex I of the Dual-Use Regulation; b.1. A pipe size connection of 200 mm (8 in.) or more inside diameter; and b.2. Rated at 10.3 MPa (1,500 psi) or more. | |
2A993 Pumps designed to move molten metals by electromagnetic forces. | |
2A994 Portable electric generators, weighing 2300 kg or less on wheels or transportable in a 2½ ton truck without a special set up requirement and specially designed components thereof. | |
2A999 Specific processing equipment as follows: | |
a. Bellows sealed valves; | |
TECHNICAL NOTES FOR 2B991 TO 2B999: | |
1. Secondary parallel contouring axes, (e.g., the w-axis on horizontal boring mills or a secondary rotary axis the centre line of which is parallel to the primary rotary axis) are not counted in the total number of contouring axes. Rotary axes need not rotate over 360°. A rotary axis can be driven by a linear device (e.g., a screw or a rack-and-pinion). | |
2. The number of axes which can be coordinated simultaneously for “contouring control” is the number of axes along or around which, during processing of the workpiece, simultaneous and interrelated motions are performed between the workpiece and a tool. This does not include any additional axes along or around which other relative motions within the machine are performed, such as: | |
2.a. Wheel-dressing systems in grinding machines; | Yes |
2.b. Parallel rotary axes designed for mounting of separate workpieces; | |
2.c. Co-linear rotary axes designed for manipulating the same workpiece by holding it in a chuck from different ends. | |
3. Axis nomenclature shall be in accordance with International Standard ISO 841:2001, Industrial automation systems and integration - Numerical control of machines - Coordinate system and motion nomenclature. | Yes |
4. A “tilting spindle” is counted as a rotary axis. | Yes |
5. ‘Stated “unidirectional positioning repeatability”’ may be used for each specific machine model as an alternative to individual machine tests, and is determined as follows: | Yes |
5.a. Select five machines of a model to be evaluated; | Yes |
5.b. Measure the linear axis repeatability (R↑,R↓) according to ISO 230-2:2014 and evaluate “unidirectional positioning repeatability” for each axis of each of the five machines; | Yes |
5.c. Determine the arithmetic mean value of the “unidirectional positioning repeatability”-values for each axis of all five machines together. These arithmetic mean values “unidirectional positioning repeatability” ( ) become the stated value of each axis for the model...)( x, y, …); | Yes |
5.d. Since the Category 2 list refers to each linear axis there will be as many ‘stated “unidirectional positioning repeatability”’ values as there are linear axes; | Yes |
5.e. If any axis of a machine model not controlled by 2B001.a. to 2B001.c. has a ‘stated “unidirectional positioning repeatability”’ equal to or less than the specified “unidirectional positioning repeatability” of each machine tool model plus 0.7 µm, the builder should be required to reaffirm the accuracy level once every eighteen months. | Yes |
6. For the purpose of 2B, measurement uncertainty for the “unidirectional positioning repeatability” of machine tools, as defined in the International Standard ISO 230-2:2014, shall not be considered. | Yes |
7. For the purpose of 2B, the measurement of axes shall be made according to test procedures in 5.3.2. of ISO 230-2:2014. Tests for axes longer than 2 meters shall be made over 2 m segments. Axes longer than 4 m require multiple tests (e.g., two tests for axes longer than 4 m and up to 8 m, three tests for axes longer than 8 m and up to 12 m), each over 2 m segments and distributed in equal intervals over the axis length. Test segments are equally spaced along the full axis length, with any excess length equally divided at the beginning, in between, and at the end of the test segments. The smallest “unidirectional positioning repeatability”-value of all test segments is to be reported. | Yes |
2B991 Numerical control units for machine tools and “numerically controlled” machine tools as follows: | |
a. Numerical control units for machine tools: | |
a.1. Having four interpolating axes that can be coordinated simultaneously for “contouring control”; or | |
a.2. Having two or more axes that can be coordinated simultaneously for contouring control and a minimum programmable increment better (less) than 0.001 mm; | |
a.3. “Numerical control” units for machine tools having two, three or four interpolating axes that can be coordinated simultaneously for contouring control and capable of receiving directly (online) and processing computer aided design (CAD) data for internal preparation of machine instructions; or | |
b. Motion control boards specially designed for machine tools and having any of the following characteristics: | |
b.1. Interpolation in more than four axes; | |
b.2. Capable of “real-time processing” of data to modify tool path, feed rate and spindle data, during the machining operation, by any of the following: | |
b.2.a. Automatic calculation and modification of part programme data for machining in two or more axes by means of measuring cycles and access to source data; or | |
b.2.b. “Adaptive control” with more than one physical variable measured and processed by means of a computing model (strategy) to change one or more machining instructions to optimise the process. | |
b.3. Capable of receiving and processing CAD data for internal preparation of machine instructions; or | |
c. “Numerically controlled” machine tools that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous “contouring control” in two or more axes and that have both of the following characteristics: | |
c.1. Two or more axes that can be coordinated simultaneously for contouring control; and | |
c.2. Positioning accuracies according to ISO 230/2 (2006), with all compensations available: | |
c.2.a. Better than [F815µm] along any linear axis (overall positioning) for grinding machines; | |
c.2.b. Better than [F815µm] along any linear axis (overall positioning) for milling machines; or | |
c.2.c. Better than [F815µm] along any linear axis (overall positioning) for turning machines; or | |
d. Machine tools, as follows, for removing or cutting metals, ceramics or composites, that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous “contouring control” in two or more axes: | |
d.1. Machine tools for turning, grinding, milling or any combination thereof, having two or more axes that can be coordinated simultaneously for “contouring control” and having any of the following characteristics: | |
d.1.a. One or more contouring tilting spindles; Note: 2B991.d.1.a. applies to machine tools for grinding or milling only. | |
d.1.b. Camming (axial displacement) in one revolution of the spindle less (better) than 0.0006 mm total indicator reading (TIR); Note: 2B991.d.1.b. applies to machine tools for turning only. | |
d.1.c. Run out (out of true running) in one revolution of the spindle less (better) than 0.0006 mm total indicator reading (TIR); | |
d.1.d. The positioning accuracies with all compensations available, are less (better) than: 0.001° on any rotary axis; | |
d.2. Electrical discharge machines (EDM) of the wire feed type that have five or more axes that can be coordinated simultaneously for “contouring control”. | Yes |
2B992 Non “numerically controlled” machine tools for generating optical quality surfaces as follows and specially designed components therefor. | |
a. Turning machines using a single point cutting tool and having all of the following characteristics: | |
a.1. Slide positioning accuracy less (better) than 0.0005 mm per 300 mm of travel; | |
a.2. Bidirectional slide positioning repeatability less (better) than 0.00025 mm per 300 mm of travel; | |
a.3. Spindle “run out” and “camming” less (better) than 0.0004 mm total indicator reading (TIR); | |
a.4. Angular deviation of the slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel; and | |
a.5. Slide perpendicularity less (better) than 0.001 mm per 300 mm of travel; Technical Note: The bidirectional slide positioning repeatability (R) of an axis is the maximum value of the repeatability of positioning at any position along or around the axis determined using the procedure and under the conditions specified in Part 2.11 of ISO 230/2: 1988. | |
b. Fly cutting machines having all of the following characteristics: | |
b.1. Spindle “run out” and “camming” less (better) than 0.0004 mm TIR; and | |
b.2. Angular deviation of slide movement (yaw, pitch and roll) less (better) than 2 seconds of arc, TIR, over full travel. | |
2B993 Gearmaking and/or finishing machinery capable of producing gears to a quality level of better than AGMA 11. | Yes |
2B996 Dimensional inspection or measuring systems or equipment as follows. a. Manual dimensional inspection machines, having both of the following characteristics: a.1. Two or more axes; and a.2. A measurement uncertainty equal to or less (better) than (3 + L/300) micrometre in any axes (L measured length in mm). | |
2B997 “Robots” that are capable of employing feedback information in real-time processing from one or more sensors to generate or modify “programs” or to generate or modify numerical program data. | |
2B998 Assemblies, circuit boards or inserts as follows specially designed for machine tools controlled by 2B991, or for equipment controlled by 2B993, 2B996 or 2B997. | Yes |
a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (“run out”) or axial (“camming”) axis motion in one revolution of the spindle less (better) than 0.0006 mm total indicator reading (TIR); | |
b. Single point diamond cutting tool inserts, having all of the following characteristics: b.1. Flawless and chip free cutting edge when magnified 400 times in any direction; b.2. Cutting radius from 0.1 to 5 mm inclusive; and b.3. Cutting radius out of roundness less (better) than 0.002 mm TIR. | |
c. Specially designed printed circuit boards with mounted parts or components capable of upgrading, according to the manufacturer’s specifications, “numerical control” units, machine tools or feed-back devices to or above the levels specified in 2B991, 2B993, 2B996, 2B997, or 2B998. | Yes |
2B999 Specific processing equipment, as follows: | |
a. Isostatic presses; | |
b. Bellows manufacturing equipment, including hydraulic forming equipment and bellows forming dies; | |
c. Laser welding machines; | |
d. MIG welders; | |
e. E-beam welders; | |
f. Monel equipment, including valves, piping, tanks and vessels; | |
g. 304 and 316 stainless steel valves, piping, tanks and vessels; Note: Fittings are considered part of “piping” for purposes of 2B999.g. | |
h. Mining and drilling equipment, as follows: | |
h.1. Large boring equipment capable of drilling holes greater than [F961cm/two feet] in diameter; | |
h.2. Large earth-moving equipment used in the mining industry; | |
i. Electroplating equipment designed for coating parts with nickel or aluminium; | |
j. Pumps designed for industrial service and for “use” with an electrical motor of 5 HP or greater; | |
k. Vacuum valves, piping, flanges, gaskets and related equipment specially designed for use in high-vacuum service; | |
l. Spin forming and flow forming machines; | |
m. Centrifugal multiplane balancing machines; | |
n. Austenitic stainless-steel plate, valves, piping, tanks and vessels. | |
2D983 “Software” specially designed or modified for the “development”, “production” or “use” of equipment controlled by 2A983. | |
2D984 “Software” required for the “development”, “production” or “use” of concealed object detection equipment controlled by 2A984. | Yes |
2D991 “Software” specially designed for the “development”, “production” or “use” of equipment controlled by 2B991, 2B993, or 2B996, 2B997, and 2B998. | Yes |
2D992 Specific “software”, as follows (see List of Items Controlled). | |
a.1. For flexible manufacturing units (FMUs) which consist at least of | |
(1) A machine tool described in 2B001.c. of Annex I of the Dual-Use Regulation; and | |
(2) A dimensional inspection machine described in Category 2 of Annex I of the Dual-Use Regulation, or another digitally controlled measuring machine controlled by an entry in Category 2 of Annex I of the Dual-Use Regulation; and | Yes |
a.2. Capable of generating or modifying, in “real-time processing”, programs or data by using the signals obtained simultaneously by means of at least two detection techniques, such as: | Yes |
a.2.a. Machine vision (optical ranging); | Yes |
a.2.b. Infrared imaging; | Yes |
a.2.c. Acoustical imaging (acoustical ranging); | Yes |
a.2.d. Tactile measurement; | Yes |
a.2.e. Inertial positioning; | Yes |
a.2.f. Force measurement; and | Yes |
a.2.g. Torque measurement. | Yes |
Note: 2D992.a. does not control “software” which only provides rescheduling of functionally identical equipment within “flexible manufacturing units” using prestored part programs and a prestored strategy for the distribution of the part programs. | |
2D993 “Software” specially designed or modified for the “development”, “production” or “use” of items controlled by 2A992 or 2A993. | |
2D994 “Software” specially designed for the “development” or “production” of portable electric generators controlled by 2A994. | |
2E984 “Technology” required for the “development”, “production” or “use” of equipment controlled by 2A984 or required for the “development” of “software” controlled by 2D984. | Yes |
2E991 “Technology” for the use of equipment controlled by 2B991, 2B993, 2B996, or 2B997. | |
2E993 “Technology” according to the General Technology Note of Annex I of the Dual-Use Regulation for the “use” of equipment controlled by 2A992 or 2A993. | |
2E994 “Technology” for the “use” of portable electric generators controlled by 2A994.] |
Textual Amendments
F8Word in Sch. 2A Pt. 1B Table substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(3)(a)
F9Words in Sch. 2A Pt. 1B Table substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(3)(b)
3A991 Electronic devices and components | ||||||
---|---|---|---|---|---|---|
a. “Microprocessor microcircuits”, “microcomputer microcircuits”, and microcontroller microcircuits having any of the following: | ||||||
a.1. A performance speed of 5 GFLOPS or more and an arithmetic logic unit with an access width of 32 bit or more; | ||||||
a.2. A clock frequency rate exceeding 25 MHz; or | ||||||
a.3. More than one data or instruction bus or serial communication port that provides a direct external interconnection between parallel “microprocessor microcircuits” with a transfer rate of 2.5 Mbyte/s; | ||||||
b. Storage integrated circuits, as follows: | ||||||
b.1. Electrical erasable programmable read-only memories (EEPROMs) with a storage [F10capacity:] | ||||||
b.1.a. Exceeding 16 Mbits per package for flash memory types; or | ||||||
b.1.b. Exceeding either of the following limits for all other EEPROM types: | ||||||
b.1.b.1. Exceeding 1 Mbit per package; or | ||||||
b.1.b.2. Exceeding 256 kbit per package and a maximum access time of less than 80 ns; | ||||||
[F10b.2 Static random access memories (SRAMs) with a storage capacity: | ||||||
b.2.a. Exceeding 1 Mbit per package; or | ||||||
b.2.b. Exceeding 256 kbit per package and a maximum access time of less than 25 ns;] | ||||||
c. Analog-to-digital converters having any of the following: | ||||||
c.1. A resolution of 8 bit or more, but less than 12 bit, with an output rate greater than 200 [F11mega samples] per second; | ||||||
c.2. A resolution of 12 bit with an output rate greater than 105 [F11mega samples] per second; | ||||||
c.3. A resolution of more than 12 bit but equal to or less than 14 bit with an output rate greater than 10 [F11mega samples] per second; or | ||||||
c.4. A resolution of more than 14 bit with an output rate greater than 2.5 [F11mega samples] per second; | ||||||
d. Field programmable logic devices having a maximum number of single-ended digital input/outputs between 200 and 700; | ||||||
e. Fast Fourier Transform (FFT) processors having a rated execution time for a 1,024 point complex FFT of less than 1 ms; | ||||||
f. Custom integrated circuits for which either the function is unknown, or the control status of the equipment in which the integrated circuits will be used is unknown to the manufacturer, having any of the following: | ||||||
f.1. More than 144 terminals; or | ||||||
f.2. A typical “basic gate propagation delay time” of less than 0.4 ns; | ||||||
g. Traveling-wave “vacuum electronic devices,” pulsed or continuous wave, as follows: | ||||||
g.1. Coupled cavity devices, or derivatives thereof; | ||||||
g.2. Devices based on helix, folded waveguide, or serpentine waveguide circuits, or derivatives thereof, having either of the following: | ||||||
g.2.a. An “instantaneous bandwidth” of half an octave or more; and | ||||||
g.2.b. The product of the rated average output power (expressed in kW) and the maximum operating frequency (expressed in GHz) of more than 0.2; or | ||||||
g.2.c. An “instantaneous bandwidth” of less than half an octave; and | ||||||
g.2.d. The product of the rated average output power (expressed in kW) and the maximum operating frequency (expressed in GHz) of more than 0.4; | ||||||
h. Flexible waveguides designed for use at frequencies exceeding 40 GHz; | ||||||
i. Surface acoustic wave and surface skimming (shallow bulk) acoustic wave devices (i.e., “signal processing” devices employing elastic waves in materials), having either of the following: | ||||||
i.1. A carrier frequency exceeding 1 GHz; or | ||||||
i.2. A carrier frequency of 1 GHz or less; and | ||||||
i.2.a. A frequency side-lobe rejection exceeding 55 dB; | ||||||
i.2.b. A product of the maximum delay time and bandwidth (time in µs and bandwidth in MHz) of more than 100; or | ||||||
i.2.c. A dispersive delay of more than 10 µs; | ||||||
j. Cells as follows: | ||||||
j.1. Primary cells having an energy density of 550 Wh/kg or less at 293 K (20ºC); | ||||||
j.2. Secondary cells having an energy density of 350 Wh/kg or less at 293 K (20ºC); | ||||||
Note:3A991.j does not control batteries, including single cell batteries. Technical Notes: 1. For the purposes of 3A991.j energy density (Wh/kg) is calculated from the nominal voltage multiplied by the nominal capacity in ampere-hours divided by the mass in kilograms. If the nominal capacity is not stated, energy density is calculated from the nominal voltage squared then multiplied by the discharge duration in hours divided by the discharge load in Ohms and the mass in kilograms. 2. For the purposes of 3A991.j, a ‘cell’ is defined as an electrochemical device, which has positive and negative electrodes, and electrolyte, and is a source of electrical energy. It is the basic building block of a battery. 3. For the purposes of 3A991.j.1, a ‘primary cell’ is a ‘cell’ that is not designed to be charged by any other source. 4. For the purposes of 3A991.j.2, a ‘secondary cell’ is a ‘cell’ that is designed to be charged by an external electrical source. | ||||||
k. “Superconductive” electromagnets or solenoids, specially designed to be fully charged or discharged in less than one minute, having all of the following: Note: 3A991.k does not control “superconductive” electromagnets or solenoids specially designed for Magnetic Resonance Imaging (MRI) medical equipment. | ||||||
k.1. Maximum energy delivered during the discharge divided by the duration of the discharge of more than 500 kJ per minute; | ||||||
k.2. Inner diameter of the current carrying windings of more than 250 mm; and | ||||||
k.3. Rated for a magnetic induction of more than 8T or “overall current density” in the winding of more than 300 A/mm2; | ||||||
l. Circuits or systems designed for electromagnetic energy storage, containing components manufactured from “superconductive” materials specially designed for operation at temperatures below the “critical temperature” of at least one of their “superconductive” constituents, having all of the following: | ||||||
l.1. Resonant operating frequencies exceeding 1 MHz; | ||||||
l.2. A stored energy density of 1 MJ/m3 or more; and | ||||||
l.3. A discharge time of less than 1 ms; | ||||||
m. Hydrogen/hydrogen-isotope thyratrons of ceramic-metal construction and rated for a peak current of 500 A or more; | ||||||
n. Digital integrated circuits based on any compound semiconductor having an equivalent gate count of more than 300 (2 input gates); | ||||||
o. “Space qualified” solar cells, cell-interconnect-coverglass (CIC) assemblies, solar panels, and solar arrays. | ||||||
3A992 General purpose electronic equipment, as follows: | ||||||
a. Electronic test equipment; | ||||||
b. Digital instrumentation magnetic tape data recorders having any of the following; | ||||||
b.1. A maximum digital interface transfer rate exceeding 60 Mbit/s and employing helical scan techniques; | ||||||
b.2. A maximum digital interface transfer rate exceeding 120 Mbit/s and employing fixed head techniques; or | ||||||
b.3. “Space qualified”; | ||||||
c. Equipment having a maximum digital interface transfer rate exceeding 60 Mbit/s and designed to convert digital video magnetic tape recorders for use as digital instrumentation data recorders; | ||||||
d. Non-modular analogue oscilloscopes having a bandwidth of 1 GHz or greater; | ||||||
e. Modular analogue oscilloscope systems having either of the following: | ||||||
e.1. A mainframe with a bandwidth of 1 GHz or greater; or | ||||||
e.2. Plug-in modules with an individual bandwidth of 4 GHz or greater; | ||||||
f. Analogue sampling oscilloscopes for the analysis of recurring phenomena with an effective bandwidth greater than 4 GHz; | ||||||
g. Digital oscilloscopes and transient recorders, using analogue-to-digital conversion techniques, capable of storing transients by sequentially sampling single-shot inputs at successive intervals of less than 1 ns (greater than 1 giga-sample per second), digitising to 8 bits or greater resolution and storing 256 or more samples. Note: This entry controls the following components designed for analogue oscilloscopes: 1. Plug-in units; 2. External amplifiers; 3. Pre-amplifiers; 4. Sampling devices; 5. Cathode ray tubes. | ||||||
3A999 Specific processing equipment as follows. | ||||||
a. Frequency changers capable of operating in the frequency range from 300 up to 600 Hz; | ||||||
b. Mass spectrometers; | ||||||
c. All flash x-ray machines, and components of pulsed power systems designed therefor, including Marx generators, high power pulse shaping networks, high voltage capacitors, and triggers; | ||||||
d. Pulse amplifiers; | ||||||
e. Time delay generation or time interval measurement equipment, as follows: | ||||||
e.1. Digital time delay generators having a resolution of 50 nanoseconds or less over time intervals of 1ms or greater; or | ||||||
e.2. Multi-channel (three or more) or modular time interval meter and chronometry equipment having a resolution of 50 ns or less over time intervals of 1 ms or greater; | ||||||
f. Chromatography and spectrometry analytical instruments | ||||||
3B991 Equipment for the manufacture of electronic components and materials, and specially designed components therefor. | ||||||
a. Equipment specially designed for the manufacture of electron tubes, optical elements and components controlled by entry 3A001 of Annex I of the Dual-Use Regulation, or entry 3A991; | ||||||
b. Equipment for the manufacture of semiconductor devices, integrated circuits and “electronic assemblies”, as follows, and systems incorporating or having the characteristics of such equipment: Note:3B991.b also controls equipment used or modified for use in the manufacture of other devices, such as imaging devices, electro-optical devices, acoustic-wave devices. | ||||||
b.1. Equipment for the processing of materials for the manufacture of devices and components, as specified in the heading of 3B991.b, as follows: Note:3B991 does not control quartz furnace tubes, furnace liners, paddles, boats (except specially designed caged boats), bubblers, cassettes or crucibles specially designed for the processing equipment | ||||||
b.1.a. Equipment specially designed for producing polycrystalline silicon and materials controlled by entry 3A001 of Annex I of the Dual-Use Regulation; | ||||||
b.1.b. Equipment specially designed for purifying or processing III/V and II/VI semiconductor materials controlled by entries 3C001, 3C002, 3C003, 3C004, or 3C005 of Annex I of the Dual-Use Regulation except crystal pullers, for which see 3B991.b.1.c below; | ||||||
b.1.c. Crystal pullers and furnaces, as follows: Note:3B991.b.1.c does not control diffusion and oxidation furnaces. | ||||||
b.1.c.1. Annealing or recrystallising equipment other than constant temperature furnaces employing high rates of energy transfer capable of processing wafers at a rate exceeding 0.005 m2 per minute; | ||||||
b.1.c.2. “Stored program controlled” crystal pullers having any of the following: | ||||||
b.1.c.2.a. Rechargeable without replacing the crucible container; | ||||||
b.1.c.2.b. Capable of operation at pressures above 2.5 x 105 Pa; or | ||||||
b.1.c.2.c. Capable of pulling crystals of a diameter exceeding 100 mm; | ||||||
b.1.d. “Stored program controlled” equipment for epitaxial growth having any of the following: | ||||||
b.1.d.1. Capable of producing silicon layer with a thickness uniform to less than ± 2.5% across a distance of 200 mm or more; | ||||||
b.1.d.2. Capable of producing a layer of any material other than silicon with a thickness uniformity across the wafer of equal to or better than ± 3.5%; or | ||||||
b.1.d.3. Capable of rotating individual wafers during processing; | ||||||
b.1.e. Molecular beam epitaxial growth equipment; | ||||||
b.1.f. Magnetically enhanced ‘sputtering’ equipment with specially designed integral load locks capable of transferring wafers in an isolated vacuum environment; Note: ‘Sputtering’ is an overlay coating process wherein positively charged ions are accelerated by an electric field towards the surface of a target (coating material). The kinetic energy of the impacting ions is sufficient to cause target surface atoms to be released and deposited on the substrate. (Note: Triode, magnetron or radio frequency sputtering to increase adhesion of coating and rate of deposition are ordinary modifications of the process.) | ||||||
b.1.g. Equipment specially designed for ion implantation, ion-enhanced or photo-enhanced diffusion, having any of the following: | ||||||
b.1.g.1. Patterning capability; | ||||||
b.1.g.2. Beam energy (accelerating voltage) exceeding 200 keV; | ||||||
b.1.g.3 Optimised to operate at a beam energy (accelerating voltage) of less than 10 keV; or | ||||||
b.1.g.4. Capable of high energy oxygen implant into a heated “substrate”; | ||||||
b.1.h. “Stored program controlled” equipment for selective removal (etching) by means of anisotropic dry methods (e.g., plasma), as follows: | ||||||
b.1.h.1. ‘Batch types’ having either of the following: | ||||||
b.1.h.1.a. End-point detection, other than optical emission spectroscopy types; or | ||||||
b.1.h.1.b. Reactor operational (etching) pressure of 26.66 Pa or less; | ||||||
b.1.h.2. ‘Single wafer types’ having any of the following: | ||||||
b.1.h.2.a. End-point detection, other than optical emission spectroscopy types; | ||||||
b.1.h.2.b. Reactor operational (etching) pressure of 26.66 Pa or less; or | ||||||
b.1.h.2.c. Cassette-to-cassette and load locks wafer handling; Notes: 1. ‘Batch types’ refers to machines not specially designed for production processing of single wafers. Such machines can process two or more wafers simultaneously with common process parameters, e.g., RF power, temperature, etch gas species, flow rates. 2. ’Single wafer types’ refers to machines specially designed for production processing of single wafers. These machines may use automatic wafer handling techniques to load a single wafer into the equipment for processing. The definition includes equipment that can load and process several wafers but where the etching parameters, e.g., RF power or end point, can be independently determined for each individual wafer. | ||||||
b.1.i. “Chemical vapor deposition” (CVD) equipment, e.g., plasma-enhanced CVD (PECVD) or photo-enhanced CVD, for semiconductor device manufacturing, having either of the following capabilities, for deposition of oxides, nitrides, metals or polysilicon: | ||||||
b.1.i.1. “Chemical vapor deposition” equipment operating below 105 Pa; or | ||||||
b.1.i.2. PECVD equipment operating either below 60 Pa (450 millitorr) or having automatic cassette-to-cassette and load lock wafer handling; Note: 3B991.b.1.i does not control low pressure “chemical vapor deposition” (LPCVD) systems or reactive ’sputtering’ equipment. | ||||||
b.1.j. Electron beam systems specially designed or modified for mask making or semiconductor device processing having any of the following: | ||||||
b.1.j.1. Electrostatic beam deflection; | ||||||
b.1.j.2. Shaped, non-Gaussian beam profile; | ||||||
b.1.j.3. Digital-to-analogue conversion rate exceeding 3 MHz; | ||||||
b.1.j.4. Digital-to-analogue conversion accuracy exceeding 12 bit; or | ||||||
b.1.j.5. Target-to-beam position feedback control precision of 1 μm or finer; Note: 3B991.b.1.j does not control electron beam deposition systems or general purpose scanning electron microscopes. | ||||||
b.1.k. Surface finishing equipment for the processing of semiconductor wafers as follows: | ||||||
b.1.k.1. Specially designed equipment for backside processing of wafers thinner than 100 μm and the subsequent separation thereof; or | ||||||
b.1.k.2. Specially designed equipment for achieving a surface roughness of the active surface of a processed wafer with a two-sigma value of 2 μm or less, total indicator reading (TIR); Note:3B991.b.1.k does not control single-side lapping and polishing equipment for wafer surface finishing. | ||||||
b.1.l. Interconnection equipment which includes common single or multiple vacuum chambers specially designed to permit the integration of any equipment controlled by 3B991 into a complete system; | ||||||
b.1.m. “Stored program controlled” equipment using “lasers” for the repair or trimming of “monolithic integrated circuits” with either of the following: | ||||||
b.1.m.1. Positioning accuracy less than ± 1 μm; or | ||||||
b.1.m.2. Spot size (kerf width) less than 3 μm. | ||||||
b.2. ‘Masks’, ‘mask’ “substrates,” mask-making equipment and image transfer equipment for the manufacture of devices and components as specified in the heading of 3B991, as follows: Note: The term ’masks’ or ‘mask’ refers to those used in electron beam lithography, X-ray lithography, and ultraviolet lithography, as well as the usual ultraviolet and visible photo-lithography. | ||||||
b.2.a. Finished masks, reticles and designs therefor, except: | ||||||
b.2.a.1. Finished masks or reticles for the production of integrated circuits not controlled by entry 3A001 of Annex I of the Dual-Use Regulation; or | ||||||
b.2.a.2. Masks or reticles, having both of the following: | ||||||
b.2.a.2.a. Their design is based on geometries of 2.5 μm or more; and | ||||||
b.2.a.2.b. The design does not include special features to alter the intended use by means of production equipment or “software”; | ||||||
b.2.b. Mask “substrates” as follows: | ||||||
b.2.b.1. Hard surface (e.g., chromium, silicon, molybdenum) coated “substrates” (e.g., glass, quartz, sapphire) for the preparation of masks having dimensions exceeding 125 mm x 125 mm; or | ||||||
b.2.b.2. “Substrates” specially designed for X-ray masks; | ||||||
b.2.c. Equipment, other than general purpose computers, specially designed for computer aided design (CAD) of semiconductor devices or integrated circuits; | ||||||
b.2.d. Equipment or machines, as follows, for mask or reticle fabrication: Note:3B991.b.2.d.1 and b.2.d.2 do not control mask fabrication equipment using photo-optical methods which was either commercially available before the 1st January, 1980, or has a performance no better than such equipment. | ||||||
b.2.d.1. Photo-optical step and repeat cameras capable of producing arrays larger than 100 mm x 100 mm, or capable of producing a single exposure larger than 6 mm x 6 mm in the image (i.e., focal) plane, or capable of producing line widths of less than 2.5 μm in the photoresist on the “substrate”; | ||||||
b.2.d.2. Mask or reticle fabrication equipment using ion or “laser” beam lithography capable of producing line widths of less than 2.5 μm; or | ||||||
b.2.d.3. Equipment or holders for altering masks or reticles or adding pellicles to remove defects; | ||||||
b.2.e. “Stored program controlled” equipment for the inspection of masks, reticles or pellicles with: | ||||||
b.2.e.1. A resolution of 0.25 μm or finer; and | ||||||
b.2.e.2. A precision of 0.75 μm or finer over a distance in one or two coordinates of 63.5 mm or more; | ||||||
Note: 3B991.b.2.e does not control general purpose scanning electron microscopes except when specially designed and instrumented for automatic pattern inspection. | ||||||
b.2.f. Align and expose equipment for wafer production using photo-optical or X-ray methods, e.g., lithography equipment, including both projection image transfer equipment and step and repeat (direct step on wafer) or step and scan (scanner) equipment, capable of performing any of the following: Note:3B991.b.2.f does not control photo-optical contact and proximity mask align and expose equipment or contact image transfer equipment. | ||||||
b.2.f.1. Production of a pattern size of less than 2.5 μm; | ||||||
b.2.f.2. Alignment with a precision finer than ± 0.25 μm (3 sigma); | ||||||
b.2.f.3. Machine-to-machine overlay no better than ± 0.3 μm; or | ||||||
b.2.f.4. A light source wavelength shorter than 400 nm; | ||||||
b.2.g. Electron beam, ion beam or X-ray equipment for projection image transfer capable of producing patterns less than 2.5 μm; Note:For focused, deflected-beam systems (direct write systems), see 3B991.b.1.j or b.10. | ||||||
b.2.h. Equipment using “lasers” for direct write on wafers capable of producing patterns less than 2.5 μm. | ||||||
b.3. Equipment for the assembly of integrated circuits, as follows: | ||||||
b.3.a. “Stored program controlled” die bonders having all of the following: | ||||||
b.3.a.1. Specially designed for “hybrid integrated circuits”; | ||||||
b.3.a.2. X-Y stage positioning travel exceeding 37.5 x 37.5 mm; and | ||||||
b.3.a.3. Placement accuracy in the X-Y plane of finer than ± 10 μm; | ||||||
b.3.b. “Stored program controlled” equipment for producing multiple bonds in a single operation (e.g., beam lead bonders, chip carrier bonders, tape bonders); | ||||||
b.3.c. Semi-automatic or automatic hot cap sealers, in which the cap is heated locally to a higher temperature than the body of the package, specially designed for ceramic microcircuit packages controlled by entry 3A001 of Annex I of the Dual-Use Regulation and that have a throughput equal to or more than one package per minute. | ||||||
b.4. Filters for clean rooms capable of providing an air environment of 10 or less particles of 0.3 μm or smaller per 0.02832 m3 and filter materials therefor. | ||||||
3B992 Equipment for the inspection or testing of electronic components and materials, and specially designed components therefor. | ||||||
a. Equipment specially designed for the inspection or testing of electron tubes, optical elements and specially designed components therefor, controlled by entry 3A001 of Annex I of the Dual-Use Regulation or 3A991; | ||||||
b. Equipment specially designed for the inspection or testing of semiconductor devices, integrated circuits and “electronic assemblies”, as follows, and systems incorporating or having the characteristics of such equipment: Note: 3B992.b also controls equipment used or modified for use in the inspection or testing of other devices, such as imaging devices, electro-optical devices, acoustic-wave devices. | ||||||
b.1. “Stored program controlled” inspection equipment for the automatic detection of defects, errors or contaminants of 0.6 μm or less in or on processed wafers, “substrates”, other than printed circuit boards or integrated circuits, using optical image acquisition techniques for pattern comparison; Note: 3B992.b.1 does not control general purpose scanning electron microscopes, except when specially designed and instrumented for automatic pattern inspection. | ||||||
b.2. Specially designed “stored program controlled” measuring and analysis equipment, as follows: | ||||||
b.2.a. Specially designed for the measurement of oxygen or carbon content in semiconductor materials; | ||||||
b.2.b. Equipment for line width measurement with a resolution of 1 μm or finer; | ||||||
b.2.c. Specially designed flatness measurement instruments capable of measuring deviations from flatness of 10 μm or less with a resolution of 1 μm or finer. | ||||||
b.3. “Stored program controlled” wafer probing equipment having any of the following: | ||||||
b.3.a. Positioning accuracy finer than 3.5 μm; | ||||||
b.3.b. Capable of testing devices having more than 68 terminals; or | ||||||
b.3.c. Capable of testing at a frequency exceeding 1 GHz; | ||||||
b.4. Test equipment as follows: | ||||||
b.4.a. “Stored program controlled” equipment, specially designed for testing discrete semiconductor devices and unencapsulated dice, capable of testing at frequencies exceeding 18 GHz; Technical Note: Discrete semiconductor devices include photocells and solar cells. | ||||||
b.4.b. “Stored program controlled” equipment specially designed for testing integrated circuits and “electronic assemblies” thereof, capable of functional testing: | ||||||
b.4.b.1. At a ‘pattern rate’ exceeding 20 MHz; or | ||||||
b.4.b.2. At a ‘pattern rate’ exceeding 10 MHz but not exceeding 20 MHz and capable of testing packages of more than 68 terminals. | ||||||
Notes: 3B992.b.4.b does not control test equipment specially designed for testing: 1. Memory; 2. “Electronic assemblies” for home and entertainment applications; and 3. Electronic components, and integrated circuits not controlled by entry 3A001 of Annex I of the Dual-Use Regulation or 3A991 provided such test equipment does not incorporate computing facilities with “user accessible programmability”. Technical Note: For purposes of 3B992.b.4.b, ‘pattern rate’ is defined as the maximum frequency of digital operation of a tester. It is therefore equivalent to the highest data rate that a tester can provide in non-multiplexed mode. It is also referred to as test speed, maximum digital frequency or maximum digital speed. | ||||||
b.4.c. Equipment specially designed for determining the performance of focal-plane arrays at wavelengths of more than 1,200 nm, using “stored program controlled” measurements or computer aided evaluation and having any of the following: | ||||||
b.4.c.1. Using scanning light spot diameters of less than 0.12 mm; | ||||||
b.4.c.2. Designed for measuring photosensitive performance parameters and for evaluating frequency response, modulation transfer function, uniformity of responsivity or noise; or | ||||||
b.4.c.3. Designed for evaluating arrays capable of creating images with more than 32 x 32 line elements; | ||||||
b.5. Electron beam test systems designed for operation at 3 keV or below, or “laser” beam systems, for non-contact probing of powered-up semiconductor devices having any of the following: | ||||||
b.5.a. Stroboscopic capability with either beam blanking or detector strobing; | ||||||
b.5.b. An electron spectrometer for voltage measurements with a resolution of less than 0.5 V; or | ||||||
b.5.c. Electrical tests fixtures for performance analysis of integrated circuits; | ||||||
Note:3B992.b.5 does not control scanning electron microscopes, except when specially designed and instrumented for non-contact probing of a powered-up semiconductor device. | ||||||
b.6. “Stored program controlled” multifunctional focused ion beam systems specially designed for manufacturing, repairing, physical layout analysis and testing of masks or semiconductor devices and having either of the following: | ||||||
b.6.a. Target-to-beam position feedback control precision of 1 μm or finer; or | ||||||
b.6.b. Digital-to-analogue conversion accuracy exceeding 12 bit; | ||||||
b.7. Particle measuring systems employing “lasers” designed for measuring particle size and concentration in air having both of the following: | ||||||
b.7.a. Capable of measuring particle sizes of 0.2 μm or less at a flow rate of 0.02832 m3 per minute or more; and | ||||||
b.7.b. Capable of characterising Class 10 clean air or better. | ||||||
3C992 Positive resists designed for semiconductor lithography specially adjusted (optimised) for use at wavelengths between 370 and 193 nm. | ||||||
3D991 “Software” specially designed for the “development”, “production”, or “use” of electronic devices, or components controlled by entry 3A991 of Annex I of the Dual-Use Regulation, general purpose electronic equipment controlled by 3A992, or manufacturing and test equipment controlled by 3B991 and 3B992; or “software” specially designed for the “use” of equipment controlled by entry 3B001.g and h of Annex I of the Dual-Use Regulation. | ||||||
3E991 “Technology” for the “development,” “production” or “use” of electronic devices or components controlled by entry 3A991 of Annex I of the Dual-Use Regulation, general purpose electronic equipment controlled by 3A992, or manufacturing and test equipment controlled by 3B991 or 3B992, or materials controlled by 3C992. |
Textual Amendments
F10Word in Sch. 2A Pt. 2 substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(4)(a)
F11Words in Sch. 2A Pt. 2 substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(4)(c)
4A994 Computers, “electronic assemblies” and related equipment, and specially designed components therefor. | ||
---|---|---|
Note 1: The control status of the “digital computers” and related equipment described in 4A994 is determined by the control status of other equipment or systems provided: a. The “digital computers” or related equipment are essential for the operation of the other equipment or systems; b. The “digital computers” or related equipment are not a “principal element” of the other equipment or systems; and N.b. 1: The control status of “signal processing” or “image enhancement” equipment specially designed for other equipment with functions limited to those required for the other equipment is determined by the control status of the other equipment even if it exceeds the “principal element” criterion. N.b. 2: For the control status of “digital computers” or related equipment for telecommunications equipment, see Category 5, Part 1 (Telecommunications) of Annex I of the Dual-Use Regulation. c. The “technology” for the “digital computers” and related equipment is determined by Category 4E of Annex I of the Dual-Use Regulation. | ||
a. Electronic computers and related equipment, and “electronic assemblies” and specially designed components therefor, rated for operation at an ambient temperature above 343 K (70°C); | ||
b. “Digital computers”, including “signal processing” or ”image enhancement” equipment, having an “Adjusted Peak Performance” (“APP”) equal to or greater than 0.0128 Weighted TeraFLOPS (WT); | ||
c. “Electronic assemblies” that are specially designed or modified to enhance performance by aggregation of processors, as follows: | ||
c.1. Designed to be capable of aggregation in configurations of 16 or more processors; | ||
c.2. Not used. | ||
Note 1: 4A994.c applies only to “electronic assemblies” and programmable interconnections with a “APP” not exceeding the limits in 4A994.b, when shipped as unintegrated “electronic assemblies”. It does not apply to “electronic assemblies” inherently limited by nature of their design for use as related equipment controlled by 4A994.k. Note 2: 4A994.c does not control any “electronic assembly” specially designed for a product or family of products whose maximum configuration does not exceed the limits of 4A994.b. | ||
d. Not used; | ||
e. Not used; | ||
f. Equipment for “signal processing” or “image enhancement” having an “Adjusted Peak Performance” (“APP”) equal to or greater than 0.0128 Weighted TeraFLOPS WT; | ||
g. Not used; | ||
h. Not used; | ||
i. Equipment containing “terminal interface equipment” exceeding the limits in 5A991; | ||
j. Equipment specially designed to provide external interconnection of “digital computers” or associated equipment that allows communications at data rates exceeding 80 Mbyte/s; | ||
Note:4A994.j does not control internal interconnection equipment (e.g., backplanes, buses) passive interconnection equipment, “network access controllers” or “communication channel controllers”. | ||
k. “Hybrid computers” and “electronic assemblies” and specially designed components therefor containing analogue-to-digital converters having all of the following: | ||
k.1. 32 channels or more; and | ||
k.2. A resolution of 14 bit (plus sign bit) or more with a conversion rate of 200,000 conversions/s or more. | ||
4D993 “Program” proof and validation “software,” “software” allowing the automatic generation of “source codes,” and operating system “software” that are specially designed for “real-time processing” equipment. | ||
a. “Program” proof and validation “software” using mathematical and analytical techniques and designed or modified for “programs” having more than 500,000 “source code” instructions; | ||
b. “Software” allowing the automatic generation of “source codes” from data acquired on line from external sensors described in Annex I of the Dual-Use Regulation; | ||
c. Operating system “software” specially designed for “real-time processing” equipment that guarantees a “global interrupt latency time” of less than 20 µs. | ||
Note: “Global interrupt latency time” is the time taken by the computer system to recognise an interrupt due to the event, service the interrupt and perform a context switch to an alternate memory-resident task waiting on the interrupt. | ||
4D994 Software” other than that controlled in entry 4D001 of Annex I of the Dual-Use Regulation specially designed or modified for the “development”, “production”, or “use” of equipment controlled by entry 4A101 of Annex I of the Dual-Use Regulation, or 4A994. | ||
4E992 “Technology” for the “development,” “production,” or “use” of equipment controlled by 4A994, or “software” controlled by 4D993 or 4D994. | ||
4E993 “Technology” for the “development” or “production” of equipment designed for “multi-data-stream processing.” |
5A991 Telecommunication equipment. | |||
---|---|---|---|
Note: 1. ‘Asynchronous transfer mode’ (‘ATM’) is a transfer mode in which the information is organised into cells; it is asynchronous in the sense that the recurrence of cells depends on the required or instantaneous bit rate. 2. ‘Bandwidth of one voice channel’ is data communication equipment designed to operate in one voice channel of 3,100 Hz, as defined in CCITT Recommendation G.151. 3. ‘Communications channel controller’ is the physical interface that controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access. 4. ‘Datagram’ is a self-contained, independent entity of data carrying sufficient information to be routed from the source to the destination data terminal equipment without reliance on earlier exchanges between this source and destination data terminal equipment and the transporting network. 5. ‘Gateway’ is the function, realised by any combination of equipment and “software”, to carry out the conversion of conventions for representing, processing or communicating information used on one system into the corresponding, but different conventions used in another system. 6. ‘Packet’ is a group of binary digits including data and call control signals that is switched as a composite whole. The data, call control signals, and possible error control information are arranged in a specified format. | |||
a. Any type of telecommunications equipment, not controlled by 5A001.a, specially designed to operate outside the temperature range from 219 K (-54 °C) to 397 K (124 °C). | |||
b. Telecommunication transmission equipment and systems, and specially designed components therefor, having any of the following characteristics, functions or features: a. Categorised as follows, or combinations thereof: 1. Radio equipment (e.g., transmitters, receivers and transceivers); 2. Line terminating equipment; 3. Intermediate amplifier equipment; 4. Repeater equipment; 5. Regenerator equipment; 6. Translation encoders (transcoders); 7. Multiplex equipment (statistical mutiplex included); 8. Modulators/demodulators (modems); 9. Transmultiplex equipment (see CCITT Rec. G701); 10. “Stored program controlled” digital cross-connection equipment; 11. ‘Gateways’ and bridges; 12. “Media access units”; and b. Designed for use in single or multi-channel communication via any of the following: 1. Wire (line); 2. Coaxial cable; 3. Optical fibre cable; 4. Electromagnetic radiation; or 5. Underwater acoustic wave propagation. | |||
b.1. Employing digital techniques, including digital processing of analogue signals, and designed to operate at a “digital transfer rate” at the highest multiplex level exceeding 45 Mbit/s or a “total digital transfer rate” exceeding 90 Mbit/s; Note: 5A991.b.1 does not control equipment specially designed to be integrated and operated in any satellite system for civil use. | |||
b.2. Modems using the ‘bandwidth of one voice channel’ with a “data signalling rate” exceeding 9,600 bits per second; | |||
b.3. Being “stored program controlled” digital cross-connect equipment with “digital transfer rate” exceeding 8.5 Mbit/s per port. | |||
b.4. Being equipment containing any of the following: | |||
b.4.a. ‘Network access controllers’ and their related common medium having a “digital transfer rate” exceeding 33 Mbit/s; or | |||
b.4.b. “Communication channel controllers” with a digital output having a “data signalling rate” exceeding 64,000 bit/s per channel; | |||
Note: If any uncontrolled equipment contains a “network access controller”, it cannot have any type of telecommunications interface, except those described in, but not controlled by 5A991.b.4. | |||
b.5. Employing a “laser” and having any of the following: | |||
b.5.a. A transmission wavelength exceeding 1,000 nm; or | |||
b.5.b. Employing analogue techniques and having a bandwidth exceeding 45 MHz; Note: 5A991.b.5.b does not control commercial TV systems. | |||
b.5.c. Employing coherent optical transmission or coherent optical detection techniques (also called optical heterodyne or homodyne techniques); | |||
b.5.d. Employing wavelength division multiplexing techniques; or | |||
b.5.e. Performing optical amplification; | |||
b.6. Radio equipment operating at input or output frequencies exceeding: | |||
b.6.a. 31 GHz for satellite-earth station applications; or | |||
b.6.b. 26.5 GHz for other applications; | |||
Note: 5A991.b.6. does not control equipment for civil use when conforming with an International Telecommunications Union (ITU) allocated band between 26.5 GHz and 31 GHz. | |||
b.7. Being radio equipment employing any of the following: | |||
b.7.a. Quadrature-amplitude-modulation (QAM) techniques above level 4 if the “total digital transfer rate” exceeds 8.5 Mbit/s; | |||
b.7.b. QAM techniques above level 16 if the “total digital transfer rate” is equal to or less than 8.5 Mbit/s; | |||
b.7.c. Other digital modulation techniques and having a “spectral efficiency” exceeding 3 bit/s/Hz; or | |||
b.7.d. Operating in the 1.5 MHz to 87.5 MHz band and incorporating adaptive techniques providing more than 15 dB suppression of an interfering signal. | |||
Notes: 1. 5A991.b.7 does not control equipment specially designed to be integrated and operated in any satellite system for civil use. 2. 5A991.b.7 does not control radio relay equipment for operation in an ITU allocated band: a. Having any of the following: a.1. Not exceeding 960 MHz; or a.2. With a “total digital transfer rate” not exceeding 8.5 Mbit/s; and b. Having a “spectral efficiency” not exceeding 4 bit/s/Hz. | |||
c. “Stored program controlled” switching equipment and related signalling systems, having any of the following characteristics, functions or features, and specially designed components therefor: Note: Statistical multiplexers with digital input and digital output which provide switching are treated as “stored program controlled” switches. | |||
c.1. Data (message) switching equipment or systems designed for “packet-mode operation” and electronic assemblies and components therefor, | |||
c.2. Not used; | |||
c.3. Routing or switching of ‘datagram’ packets; Note: The restrictions in 5A991.c.3 do not apply to networks restricted to using only ‘network access controllers’ or to ‘network access controllers’ themselves. | |||
c.4. Not used. | |||
c.5. Multi-level priority and pre-emption for circuit switching; Note: 5A991.c.5 does not control single-level call pre-emption. | |||
c.6. Designed for automatic hand-off of cellular radio calls to other cellular switches or automatic connection to a centralised subscriber data base common to more than one switch; | |||
c.7. Containing “stored program controlled” digital cross connect equipment with “digital transfer rate” exceeding 8.5 Mbit/s per port. | |||
c.8. “Common channel signalling” operating in either non-associated or quasi-associated mode of operation; | |||
c.9. “Dynamic adaptive routing”; | |||
c.10. Being packet switches, circuit switches and routers with ports or lines exceeding any of the following: | |||
c.10.a. A “data signalling rate” of 64,000 bit/s per channel for a ‘communications channel controller’; or Note: 5A991.c.10.a does not control multiplex composite links composed only of communication channels not individually controlled by 5A991.b.1. | |||
c.10.b. A “digital transfer rate” of 33 Mbit/s for a ‘network access controller’ and related common media; | |||
Note: 5A991.c.10 does not control packet switches or routers with ports or lines not exceeding the limits in 5A991.c.10. | |||
c.11. “Optical switching”; | |||
c.12. Employing ‘Asynchronous Transfer Mode’ (‘ATM’) techniques; | |||
d. Optical fibres and optical fibre cables of more than 50 m in length designed for single mode operation; | |||
e. Centralised network control having all of the following: | |||
e.1. Receives data from the nodes; and | |||
e.2. Process these data in order to provide control of traffic not requiring operator decisions, and thereby performing “dynamic adaptive routing”; | |||
Note: 5A991.e does not preclude control of traffic as a function of predictable statistical traffic conditions. | |||
f. Phased array antennas, operating above 10.5 GHz, containing active elements and distributed components, and designed to permit electronic control of beam shaping and pointing, except for landing systems with instruments meeting International Civil Aviation Organisation (ICAO) standards (microwave landing systems (MLS)); | |||
g. Mobile communications equipment and electronic assemblies and components therefor; | |||
h. Radio relay communications equipment designed for use at frequencies equal to or exceeding 19.7 GHz and components therefor. | |||
5B991 Telecommunications test equipment. | |||
5C991 Preforms of glass or of any other material optimised for the manufacture of optical fibres controlled by 5A991. | |||
5D991 “Software” specially designed or modified for the “development,” “production” or “use” of equipment controlled by 5A991 and 5B991, and dynamic adaptive routing software, as follows: | |||
a. “Software”, other than in machine-executable form, specially designed for “dynamic adaptive routing”; | |||
b. Not used. | |||
5E991 “Technology” for the “development”, “production” or “use” of equipment controlled by 5A991 or 5B991, or “software” controlled by 5D991, and other “technologies” as follows: | |||
Note: 1. ‘Synchronous digital hierarchy’ (SDH) is a digital hierarchy providing a means to manage, multiplex, and access various forms of digital traffic using a synchronous transmission format on different types of media. The format is based on the Synchronous Transport Module (STM) that is defined by CCITT Recommendation G.703, G.707, G.708, G.709 and others yet to be published. The first level rate of ‘SDH’ is 155.52 Mbits/s. 2. ‘Synchronous optical network’ (SONET) is a network providing a means to manage, multiplex and access various forms of digital traffic using a synchronous transmission format on fiber optics. The format is the North America version of ‘SDH’ and also uses the Synchronous Transport Module (STM). However, it uses the Synchronous Transport Signal (STS) as the basic transport module with a first level rate of 51.81 Mbits/s. The SONET standards are being integrated into those of ‘SDH’. | |||
a. Specific “technologies” as follows: | |||
a.1. “Technology” for the processing and application of coatings to optical fibre specially designed to make it suitable for underwater use; | |||
a.2. “Technology” for the “development” of equipment employing ‘Synchronous Digital Hierarchy’ (‘SDH’) or ‘Synchronous Optical Network’ (‘SONET’) techniques. |
5A992 “Information security” systems, equipment and components, described by entry 5A002 of Annex I of the Dual-Use Regulation and classified under Note 3 to Category 5, Part 2 of Annex I of the Dual-Use Regulation (Cryptography Note). | |
---|---|
5D992 “Information Security” “software” described by entry 5D002 to Category 5, Part 2 in Annex I of the Dual-Use Regulation and classified under Note 3 to Category 5, Part 2 of Annex I of the Dual-Use Regulation (Cryptography Note). | |
Note: This entry does not control “software” designed or modified to protect against malicious computer damage, e.g., viruses, where the use of “cryptography” is limited to authentication, digital signature and/or the decryption of data or files. | |
5E992 “Information Security” “technology” as follows: | |
a. “Technology” for the “use” of items controlled by 5A992 or “software” controlled by 5D992. |
6A991 Marine or terrestrial acoustic equipment capable of detecting or locating underwater objects or features or positioning surface vessels or underwater vehicles; and specially designed components therefor. | ||||
---|---|---|---|---|
6A992 Optical Sensors as follows | ||||
a. Image intensifier tubes and specially designed components therefor, as follows: | ||||
a.1. Image intensifier tubes having all the following: | ||||
a.1.a. A peak response in wavelength range exceeding 400 nm, but not exceeding 1,050 nm; | ||||
a.1.b. A microchannel plate for electron image amplification with a hole pitch (centre‑to‑centre spacing) of less than 25 μm; and | ||||
a.1.c. Having any of the following: | ||||
a.1.c.1. An S‑20, S‑25 or multialkali photocathode; or | ||||
a.1.c.2. A GaAs or GaInAs photocathode; | ||||
a.2. Specially designed microchannel plates having both of the following: | ||||
a.2.a. 15,000 or more hollow tubes per plate; and | ||||
a.2.b. Hole pitch (centre‑to‑centre spacing) of less than 25 μm. | ||||
b. Direct view imaging equipment operating in the visible or infrared spectrum, incorporating image intensifier tubes having the characteristics listed in 6A992.a.1. | ||||
6A993 Cameras as follows: | ||||
a. Cameras that meet the criteria of Note 3 to entry 6A003.b.4. of Annex I of the Dual-Use Regulation. | ||||
6A994 Optics as follows: | ||||
a. Optical filters: | ||||
a.1. For wavelengths longer than 250 nm, comprised of multi‑layer optical coatings and having either of the following: | ||||
a.1.a. Bandwidths equal to or less than 1 nm Full Width Half Intensity (FWHI) and peak transmission of 90% or more; or | ||||
a.1.b. Bandwidths equal to or less than 0.1 nm FWHI and peak transmission of 50% or more; Note: 6A994 does not control optical filters with fixed air gaps or Lyot‑type filters. | ||||
a.2. For wavelengths longer than 250 nm, and having all of the following: | ||||
a.2.a. Tunable over a spectral range of 500 nm or more; | ||||
a.2.b. Instantaneous optical bandpass of 1.25 nm or less; | ||||
a.2.c. Wavelength resettable within 0.1 ms to an accuracy of 1 nm or better within the tunable spectral range; and | ||||
a.2.d. A single peak transmission of 91% or more; | ||||
a.3. Optical opacity switches (filters) with a field of view of 30 degrees or wider and a response time equal to or less than 1 ns; | ||||
b. “Fluoride fibre” cable, or optical fibres therefor, having an attenuation of less than 4 dB/km in the wavelength range exceeding 1,000 nm but not exceeding 3,000 nm. | ||||
6A995 “Lasers” as follows: | ||||
a. Carbon dioxide (CO2) “lasers” having any of the following: | ||||
a.1. A CW output power exceeding 10 kW; | ||||
a.2. A pulsed output with a “pulse duration” exceeding 10 µs; and | ||||
a.2.a. An average output power exceeding 10 kW; or | ||||
a.2.b. A pulsed “peak power” exceeding 100 kW; or | ||||
a.3. A pulsed output with a “pulse duration” equal to or less than 10 μs; and | ||||
a.3.a. A pulse energy exceeding 5 J per pulse and “peak power” exceeding 2.5 kW; or | ||||
a.3.b. An average output power exceeding 2.5 kW; | ||||
b. Semiconductor lasers, as follows | ||||
b.1. Individual, single‑transverse mode semiconductor “lasers” having: | ||||
b.1.a. An average output power exceeding 100 mW; or | ||||
b.1.b. A wavelength exceeding 1,050 nm; | ||||
b.2. Individual, multiple‑transverse mode semiconductor “lasers”, or arrays of individual semiconductor “lasers”, having a wavelength exceeding 1,050 nm; | ||||
c. Ruby “lasers” having an output energy exceeding 20 J per pulse; | ||||
d. Non-“tunable” “pulsed lasers” having an output wavelength exceeding 975 nm but not exceeding 1,150 nm and having any of the following: | ||||
d.1. A “pulse duration” equal to or exceeding 1 ns but not exceeding 1 μs, and having any of the following: | ||||
d.1.a. A single transverse mode output and having any of the following: | ||||
d.1.a.1. A ‘wall-plug efficiency’ exceeding 12% and an “average output power” exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1kHz; or | ||||
d.1.a.2. An “average output power” exceeding 20 W; or | ||||
d.1.b. A multiple transverse mode output and having any of the following: | ||||
d.1.b.1. A ‘wall-plug efficiency’ exceeding 18% and an “average output power” exceeding 30W; | ||||
d.1.b.2. A “peak power” exceeding 200 MW; or | ||||
d.1.b.3. An “average output power” exceeding 50 W; or | ||||
d.2. A “pulse duration” exceeding 1 μs and having any of the following: | ||||
d.2.a. A single transverse mode output and having any of the following: | ||||
d.2.a.1. A ‘wall-plug efficiency’ exceeding 12% and an “average output power” exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or | ||||
d.2.a.2. An “average output power” exceeding 20 W; or | ||||
d.2.b. A multiple transverse mode output and having any of the following: | ||||
d.2.b.1. A ‘wall-plug efficiency’ exceeding 18% and an “average output power” exceeding 30 W; or | ||||
d.2.b.2. An “average output power” exceeding 500 W; | ||||
e. Non-“tunable” continuous wave “(CW) lasers”, having an output wavelength exceeding 975 nm but not exceeding 1,150nm and having any of the following: | ||||
e.1. A single transverse mode output and having any of the following: | ||||
e.1.a. A ‘wall-plug efficiency’ exceeding 12% and an “average output power” exceeding 10 W and capable of operating at a pulse repetition frequency greater than 1 kHz; or | ||||
e.1.b. An “average output power” exceeding 50 W; or | ||||
e.2. A multiple transverse mode output and having any of the following: | ||||
e.2.a. A ‘wall-plug efficiency’ exceeding 18% and an “average output power” exceeding 30 W; or | ||||
e.2.b. An “average output power” exceeding 500 W; Note: 6A995.e.2.b does not control multiple transverse mode, industrial “lasers” with output power less than or equal to 2kW with a total mass greater than 1,200kg. For the purpose of this note, total mass includes all components required to operate the “laser,” e.g., “laser,” power supply, heat exchanger, but excludes external optics for beam conditioning and/or delivery. | ||||
f. Non-“tunable” “lasers”, having a wavelength exceeding 1,400 nm, but not exceeding 1555 nm and having any of the following: | ||||
f.1. An output energy exceeding 100 mJ per pulse and a pulsed “peak power” exceeding 1 W; or | ||||
f.2. An average or CW output power exceeding 1 W; | ||||
g. Free electron “lasers”. | ||||
6A996 “Magnetometers”, “Superconductive” electromagnetic sensors, and specially designed components therefor, as follows | ||||
a. “Magnetometers”, having a ‘sensitivity’ lower (better) than 1.0 nT (rms) per square root Hz. Technical Note: For the purposes of 6A996, ‘sensitivity’ (noise level) is the root mean square of the device ‑limited noise floor which is the lowest signal that can be measured. | ||||
b. “Superconductive” electromagnetic sensors and components manufactured from “superconductive” materials, having all of the following: | ||||
b.1. Designed for operation at temperatures below the “critical temperature” of at least one of their “superconductive” constituents (including Josephson effect devices or “superconductive” quantum interference devices (SQUIDS)); | ||||
b.2. Designed for sensing electromagnetic field variations at frequencies of 1 KHz or less; and | ||||
b.3. Having any of the following: | ||||
b.3.a. Incorporating thin-film SQUIDS with a minimum feature size of less than 2 μm and with associated input and output coupling circuits; | ||||
b.3.b. Designed to operate with a magnetic field slew rate exceeding 1 x 106 magnetic flux quanta per second; | ||||
b.3.c. Designed to function without magnetic shielding in the earth’s ambient magnetic field; or | ||||
b.3.d. Having a temperature coefficient less (smaller) than 0.1 magnetic flux quantum/K. | ||||
6A997 Gravity meters (gravimeters) for ground use as follows: | ||||
a. Having a static accuracy of less (better) than 100 microgal; or | ||||
b. Being of the quartz element (Worden) type. | ||||
6A998 Radar systems, equipment and specially designed components therefor, as follows: | ||||
a. Airborne radar equipment and specially designed components therefor. | ||||
b. “Space-qualified” “laser” radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation. | ||||
c. Millimetre wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following: | ||||
c.1. Operates at a frequency of 94 GHz; | ||||
c.2. An average output power of less than 20 mW; | ||||
c.3. Radar beam width of 1 degree; and | ||||
c.4. Operating range equal to or greater than 1500 m. | ||||
6A999 Specific processing equipment, as follows: | ||||
a. Seismic detection equipment not controlled in paragraph c. | ||||
b. Radiation hardened TV cameras, | ||||
c. Seismic intrusion detection systems that detect, classify and determine the bearing on the source of a detected signal. | ||||
6B995 Equipment, including tools, dies, fixtures or gauges, and other specially designed components therefor, specially designed or modified for any of the following: | ||||
a. For the manufacture or inspection of: | ||||
a.1. Free electron “laser” magnet wigglers; | ||||
a.2. Free electron “laser” photo injectors; | ||||
b. For the adjustment, to required tolerances, of the longitudinal magnetic field of free electron “lasers”. | ||||
6C992 Optical sensing fibres that are modified structurally to have a ‘beat length’ of less than 500 mm (high birefringence) or optical sensor materials not described in entry 6C002.b. of Annex I of the Dual-Use Regulation and having a zinc content of equal to or more than 6% by ‘mole fraction.’ | ||||
Note: ‘Mole fraction’ is defined as the ratio of moles of ZnTe to the sum of the moles of CdTe and ZnTe present in the crystal. 2) ‘Beat length’ is the distance over which two orthogonally polarised signals, initially in phase, must pass in order to achieve a 2 Pi radian(s) phase difference. | ||||
6C994 Optical materials. | ||||
a. Low optical absorption materials, as follows: | ||||
a.1. Bulk fluoride compounds containing ingredients with a purity of 99.999% or better; or Note: 6C994.a.1 controls fluorides of zirconium or aluminium and variants. | ||||
a.2. Bulk fluoride glass made from compounds controlled by entry 6C004.e.1 of Annex I of the Dual-Use Regulation; | ||||
b. ‘Optical fibre preforms’ made from bulk fluoride compounds containing ingredients with a purity of 99.999% or better, specially designed for the manufacture of “fluoride fibres” controlled by 6A994.b. | ||||
6D991 “Software,” specially designed for the “development”, “production”, or “use” of items controlled by entries 6A002 and 6A003 of Annex I of the Dual-Use Regulation, 6A991, 6A996, 6A997, or 6A998. | ||||
6D992 “Software” specially designed for the “development” or “production” of equipment controlled by 6A992, 6A994, or 6A995. | ||||
6D993 Other “software”. | ||||
a. Air Traffic Control (ATC) “software” application “programs” hosted on general purpose computers located at Air Traffic Control centres, and capable of automatically handing over primary radar target data (if not correlated with secondary surveillance radar (SSR) data) from the host ATC centre to another ATC centre. | ||||
b. “Software” specially designed for seismic intrusion detection systems in 6A999.c. | ||||
c. “Source Code” specially designed for seismic intrusion detection systems in 6A999.c. | ||||
6E991 “Technology” for the “development”, “production” or “use” of equipment controlled by 6A991, 6A996, 6A997, 6A998 or 6A99.c. | ||||
6E992 “Technology” for the “development” or “production” of equipment, materials or “software” controlled by 6A992, 6A994, or 6A995, 6B995, 6C992, 6C994, or 6D993. | ||||
6E993 Other “technology” as follows. | ||||
a. Optical fabrication technologies for serially producing optical components at a rate exceeding 10 m2 of surface area per year on any single spindle and having all of the following: | ||||
a.1. Area exceeding 1 m2, and | ||||
a.2. Surface figure exceeding λ/10 (rms) at the designed wavelength; | ||||
b. “Technology” for optical filters with a bandwidth equal to or less than 10 nm, a field of view (FOV) exceeding 40° and a resolution exceeding 0.75 line pairs per milliradian; | ||||
c. “Technology” for the “development” or “production” of cameras controlled by 6A993; | ||||
d. “Technology” “required” for the “development” or “production” of non‑triaxial fluxgate “magnetometers” or non‑triaxial fluxgate “magnetometer” systems, having any of the following: | ||||
d.1. ‘Sensitivity’ lower (better) than 0.05 nT (rms) per square root Hz at frequencies of less than 1 Hz; or | ||||
d.2. ‘Sensitivity’ lower (better) than 1 x 10‑3 nT (rms) per square root Hz at frequencies of 1 Hz or more; | ||||
e. “Technology” “required” for the “development” or “production” of infrared up-conversion devices having all of the following: | ||||
e.1. A response in the wavelength range exceeding 700 nm but not exceeding 1500 nm; and | ||||
e.2. A combination of an infrared photodetector, light emitting diode (LED), and nanocrystal to convert infrared light into visible light. | ||||
Technical Note: For the purposes of entry 6E993, ‘sensitivity’ (or noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured. |
7A994 Navigation direction finding equipment, airborne communication equipment, all aircraft inertial navigation systems, and other avionic equipment, including components, |
---|
7B994 Other equipment for the test, inspection, or “production” of navigation and avionics equipment. |
7D994 “Software” for the “development”, “production”, or “use” of navigation, airborne communication and other avionics. |
7E994 “Technology” for the “development,” “production” or “use” of navigation, airborne communication, and other avionics equipment. |
8A992 Vessels, marine systems or equipment, and specially designed components therefor, and marine boilers and components therefor. | ||
---|---|---|
a. Underwater vision systems, as follows: | ||
a.1. Television systems (comprising camera, lights, monitoring and signal transmission equipment) having a limiting resolution when measured in air of more than 500 lines and specially designed or modified for remote operation with a submersible vehicle; or | ||
a.2. Underwater television cameras having a limiting resolution when measured in air of more than 700 lines; Technical Note: Limiting resolution in television is a measure of horizontal resolution usually expressed in terms of the maximum number of lines per picture height discriminated on a test chart, using IEEE Standard 208/1960 or any equivalent standard. | ||
b. Photographic still cameras specially designed or modified for underwater use, having a film format of 35 mm or larger, and having autofocusing or remote focusing specially designed for underwater use; | ||
c. Stroboscopic light systems, specially designed or modified for underwater use, capable of a light output energy of more than 300 J per flash; | ||
d. Other underwater camera equipment; | ||
e. Other submersible systems; | ||
f. Vessels, including inflatable boats, and specially designed components therefor, ; | ||
g. Marine engines (both inboard and outboard), and specially designed components therefor, ; | ||
h. Other self-contained underwater breathing apparatus (scuba gear) and related equipment, ; | ||
i. Life jackets, inflation cartridges, compasses, wetsuits, masks, fins, weight belts, and dive computers; | ||
j. Underwater lights and propulsion equipment; | ||
k. Air compressors and filtration systems, specially designed for filling air cylinders. | ||
l. Marine boilers designed to have any of the following: | ||
l.1. Heat release rate (at maximum rating) equal to or in excess of 190,000 BTU per hour per cubic foot of furnace volume; or | ||
l.2. Ratio of steam generated in kg per hour (at maximum rating) to the dry weight of the boiler in kg equal to or in excess of 0.83. | ||
m. Components for marine boilers described in 8A992.l. | ||
8D992 “Software” specially designed or modified for the “development”, “production” or “use” of equipment controlled by 8A992. | ||
8D999 “Software” specially designed for the operation of unmanned submersible vehicles. | ||
8E992 “Technology” for the “development”, “production” or “use” of equipment controlled by 8A992. | ||
[F12maritime goods and maritime technology within the meaning in regulation 21 (interpretation of Part 5).] |
Textual Amendments
F12Words in Sch. 2A Pt. 7 inserted (15.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 11) Regulations 2022 (S.I. 2022/792), regs. 1(2), 12(4) (with reg. 13)
9A990 Diesel engines and tractor units, and specially designed components therefor. | |
---|---|
a. Diesel engines for trucks, tractor units, and automotive applications of continuous power output of 400 BHP (298 kW) or greater (performance based on Society of Automotive Engineers J1349 standard conditions of 100 kPa and 25°C); | |
b. Off-road semi-trailer wheeled tractor units of carriage capacity 9 t or more and specially designed components therefor; | |
c. On-road semi-trailer tractor units, with single or tandem rear axles rated for 9 t per axel or greater and specially designed components therefor. | |
9A991 “Aircraft” and gas turbine engines and components | |
a. Not used; | |
[F13b. Not used]; | |
c. Aero gas turbine engines and specially designed components therefor; | |
[F14d. Not used]; | |
e. Pressurised aircraft breathing equipment and specially designed components therefor. | |
F15... | |
9B990 Vibration test equipment and specially designed components therefor. | |
9B991 “Equipment,” tooling or fixtures specially designed for manufacturing or measuring gas turbine blades, vanes or tip shroud castings, as follows: | |
a. Automated equipment using non-mechanical methods for measuring aerofoil wall thickness; | |
b. Tooling, fixtures or measuring equipment for the “laser”, water jet or ECM/EDM hole drilling processes controlled by entry 9E003.c of Annex I of the Dual-Use Regulation; | |
c. Ceramic core leaching equipment; | |
d. Ceramic core manufacturing equipment or tools; | |
e. Ceramic shell wax pattern preparation equipment; | |
f. Ceramic shell burn out or firing equipment. | |
9D990 “Software”, for the “development” or “production” of equipment controlled by 9A990 or 9B990. | |
9D991 “Software”, for the “development” or “production” of equipment controlled by 9A991 or 9B991. | |
9E990 “Technology”, for the “development” or “production” or “use” of equipment controlled by 9A990 or 9B990. | |
9E991 “Technology”, for the “development”, “production” or “use” of equipment controlled by 9A991 or 9B991. | |
9E993 Other “technology”, not described by entry 9E003 of Annex I of the Dual-Use Regulation, as follows: | |
a. Rotor blade tip clearance control systems employing active compensating casing “technology” limited to a design and development data base; | |
b. Gas bearing for turbine engine rotor assemblies.] |
Textual Amendments
F13Words in Sch. 2A Pt. 8 substituted (8.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 6) Regulations 2022 (S.I. 2022/241), regs. 1(2), 14(a)(i)
F14Words in Sch. 2A Pt. 8 substituted (8.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 6) Regulations 2022 (S.I. 2022/241), regs. 1(2), 14(a)(ii)
F15Words in Sch. 2A Pt. 8 omitted (8.3.2022 at 5.00 p.m.) by virtue of The Russia (Sanctions) (EU Exit) (Amendment) (No. 6) Regulations 2022 (S.I. 2022/241), regs. 1(2), 14(b)
[F16Jet fuel and fuel additives
Any thing falling within a commodity code mentioned in column 1 of the following table.
Textual Amendments
F16Words and Table in Sch. 2A Pt. 8 inserted (15.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 11) Regulations 2022 (S.I. 2022/792), reg. 1(2), Sch. 2 (with reg. 13)
Commodity code (1) | Item (2) |
---|---|
Jet fuel (other than kerosene): | |
2710 12 70 | —spirit type jet fuel (light oils) |
2710 19 29 | —other than kerosene (medium oils) |
2710 19 21 | —kerosene type jet fuel (medium oils) |
2710 20 90 | —kerosene type jet fuel blended with biodiesel |
Oxidation inhibitors Oxidation inhibitors used in additives for lubricating oils: | |
3811 21 00 | — oxidation inhibitors containing petroleum oils |
3811 29 00 | — other oxidation inhibitors |
3811 90 00 | Oxidation inhibitors used for other liquids used for the same purpose as mineral oils |
Static dissipater additives Static dissipater additives for lubricating oils: | |
3811 21 00 | — containing petroleum oils |
3811 29 00 | — other |
3811 90 00 | Static dissipater additives for other liquids used for the same purpose as mineral oils |
Corrosion inhibitors Corrosion inhibitors for lubricating oils: | |
3811 21 00 | — containing petroleum oils |
3811 29 00 | — other |
3811 90 00 | Corrosion inhibitors for other liquids used for the same purpose as mineral oils |
Fuel system icing inhibitors (anti-icing additives) Fuel system icing inhibitors for lubricating oils: | |
3811 21 00 | — containing petroleum oils |
3811 29 00 | — other |
3811 90 00 | Fuel system icing inhibitors for other liquids used for the same purpose as mineral oils |
Metal de-activators Metal de-activators for lubricating oils: | |
3811 21 00 | —containing petroleum oils |
3811 29 00 | — other |
3811 90 00 | Metal de-activator for other liquids used for the same purpose as mineral oils |
Biocide additives Biocide additives for lubricating oils: | |
3811 21 00 | — containing petroleum oils |
3811 29 00 | — other |
3811 90 00 | Biocide additives for other liquids used for the same purpose as mineral oils |
Thermal stability improver additives Thermal stability improver for lubricating oils: | |
3811 21 00 | — containing petroleum oils |
3811 29 00 | — other |
3811 90 00 | Thermal stability improver for other liquids used for the same purposes as mineral oils] |
Textual Amendments
1. Equipment for oil production or oil exploration as follows—U.K.
(a)drill head integrated measurement equipment, including inertial navigation systems for measurement while drilling (MWD);
(b)gas monitoring systems and detectors therefor, designed for continuous operation and detection of hydrogen sulphide;
(c)equipment for seismological measurements, including reflection seismetics and seismic vibrators;
(d)sediment echo sounders.
2. Collector equipment for metal ores in deep seabed.U.K.
3. Equipment for the “production” of printed electronics for organic light emitting diodes (OLED), organic field-effect transistors (OFET) or organic photovoltaic cells (OPVC).U.K.
4. Equipment for the “production” of microelectromechanical systems (MEMS) using the mechanical properties of silicon, including sensors in chip format like pressure membranes, bending beams or micro adjustment devices.U.K.
5. Equipment, specially designed for the production of E-Fuels (electrofuels and synthetic fuels) or ultra efficient solar cells (efficiency > 30 %).U.K.
6. Numerical controlled machine tools, having one or more linear axis with a travel length greater than 8000 mm.U.K.
7. Advanced materials as follows—U.K.
(a)materials for cloaking or adaptive camouflage;
(b)metamaterials, e.g. with a negative refractive index;
(c)high entropy alloys (HEA);
(d)Heusler compounds;
(e)Kitaev materials, including kitaev spin liquids.
8. Conjugated polymers (conductive, semiconductive, electroluminescent) for printed or organic electronics.U.K.
9. Energetic materials as follows and mixtures thereof, except where the material is incorporated in a medical product—U.K.
(a)ammonium picrate (CAS 131-74-8);
(b)black powder;
(c)hexanitrodiphenylamine (CAS 131-73-7);
(d)difluoroamine (CAS 10405-27-3);
(e)nitrostarch (CAS 9056-38-6);
(f)tetranitronaphthalene;
(g)trinitroanisole;
(h)trinitronaphthalene;
(i)trinitroxylene;
(j)N-pyrrolidinone; 1-methyl-2-pyrrolidinone (CAS 872-50-4);
(k)dioctylmaleate (CAS 142-16-5);
(l)ethylhexylacrylate (CAS 103-11-7);
(m)triethylaluminium (TEA) (CAS 97-93-8), trimethylaluminium (TMA) (CAS 75-24-1), and other pyrophoric metal alkyls and aryls of lithium, sodium, magnesium, zinc or boron;
(n)nitroglycerin (or glyceroltrinitrate, trinitroglycerine) (NG) (CAS 55-63-0);
(o)Ethylenediaminedinitrate (EDDN) (CAS 20829-66-7);
(p)lead azide (CAS 13424-46-9), normal lead styphnate (CAS 15245-44-0) and basic lead styphnate (CAS 12403-82-6), and primary explosives or priming compositions containing azides or azide complexes;
(q)diethyldiphenylurea (CAS 85-98-3); dimethyldiphenylurea (CAS 611-92-7); methylethyldiphenyl urea;
(r)N,N-diphenylurea (unsymmetrical diphenylurea) (CAS 603-54-3);
(s)methyl-N,N-diphenylurea (methyl unsymmetrical diphenylurea) (CAS 13114-72-2);
(t)ethyl-N,N-diphenylurea (ethyl unsymmetrical diphenylurea) (CAS 64544-71-4);
(u)4-Nitrodiphenylamine (4-NDPA)(CAS 836-30-6);
(v)2,2-dinitropropanol (CAS 918-52-5).
Note: For the purpose of this entry, “medical product” means (1) a pharmaceutical formulation designed for human administration in the treatment of medical conditions, and (2) prepackaged for distribution as a clinical or medical product.
10. “Technology” “required” for the “development”, “production” or “use” of the systems, equipment, components and software specified in paragraphs 1 to 8.U.K.
11. “Software” specially designed or modified for the “development”, “production” or “use” of the systems, equipment and components specified in paragraphs 3 to 6.]U.K.
Regulation 60B
Textual Amendments
1. In regulation 60B, “consumer communication device” means any of the following, of a type which is generally available to the public—U.K.
(a)computers falling within entries 5A992 and 4A994.b of Schedule 2A ;
(b)disk drives and solid-state storage equipment falling within entry 5A992 of Schedule 2A;
(c)input/output control units (other than industrial controllers designed for chemical processing);
(d)graphics accelerators and graphics coprocessors;
(e)monitors falling within entry 5A992 of Schedule 2A;
(f)printers falling within entry 5A992 of Schedule 2A;
(g)modems falling within entries 5A991.b.2, 5A991.b.4 or 5A992 of Schedule 2A;
(h)network access controllers and communications channel controllers falling within entry 5A991.b.4 of Schedule 2A;
(i)keyboards, mice and similar devices specified in entry 5A992 of Schedule 2A;
(j)mobile phones, including cellular and satellite telephones, personal digital assistants, and subscriber information module (SIM) cards and similar devices falling within entries 5A992 or 5A991 of Schedule 2A;
(k)memory devices falling within entry 5A992 of Schedule 2A;
(l)information security equipment, software (except encryption source code) and peripherals falling within entries 5A992 or 5D992 of Schedule 2A;
(m)digital cameras and memory cards falling within entry 6A993 or 5A992 of Schedule 2A;
(n)television and radio receivers falling within entry 5A992 of Schedule 2A;
(o)recording devices falling within entry 5A992 of Schedule 2A;
(p)batteries, chargers, carrying cases and accessories for the goods falling within paragraphs (a) to (o) above;
(q)software (except encryption source code) falling within entries 4D994, 5D991 and 5D992 of Schedule 2A, which is for use with equipment described in paragraphs (a) to (p) above.
2. For the purposes of paragraph 1, goods and technology are generally available to the public if they are —U.K.
(a)sold from stock at retail selling points without restriction, by means of—
(i)over the counter transactions,
(ii)mail order transactions,
(iii)electronic transactions, or
(iv)telephone order transactions, and
(b)designed for installation by the user without further substantial support by the supplier.]
Regulation 21
Textual Amendments
F19Sch. 2C inserted (8.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 6) Regulations 2022 (S.I. 2022/241), reg. 1(2), Sch.
1. For the purposes of this Schedule, whether a thing “falls within chapter 88 of the Goods Classification Table” is to be interpreted in accordance with paragraph 1 of Schedule 3.
2. Terms printed in quotation marks and not defined in this Schedule have the meaning given to them in—
(a)Schedules 2 and 3 of the Export Control Order 2008, or
(b)Annex I of the Dual-Use Regulation,
as applicable.
3. Any thing falling within chapter 88 of the Goods Classification Table.U.K.
4. “Technology” for the “development”, “production” or “use” of things falling within chapter 88 of the Goods Classification Table.U.K.
5. “Software” for the “development”, “production” or “use” of things falling within chapter 88 of the Goods Classification Table.]U.K.
Regulation 21
Textual Amendments
F20Sch. 2D inserted (14.4.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 8) Regulations 2022 (S.I. 2022/452), reg. 1(2), Sch. Pt. 1
1.—(1) Paragraph 1 of Schedule 3 applies for the purposes of interpreting Part 2.
(2) Terms printed in quotation marks and not defined in this Schedule have the meaning given to them in—
(a)Schedules 2 and 3 to the Export Control Order 2008, or
(b)Annex I of the Dual-Use Regulation,
as applicable.
2. Any thing falling within—
(a)a commodity code mentioned in column 1 of the following table, and
(b)the description in column 2 corresponding to that code.
Commodity code | Description |
---|---|
ex 8479 89 97 ex 8543 70 90 | Alkylation and isomerization units |
ex 8479 89 97 ex 8543 70 90 | Aromatic hydrocarbon production units |
ex 8419 40 00 | Atmospheric-vacuum crude distillation units (CDU) |
ex 8479 89 97 ex 8543 70 90 | Catalytic reforming / cracker units |
[F21 ex 8419 50 20, 8419 50 80 | Cold boxes in the LNG-process] |
[F22ex 8419 89 10 | Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water, designed to be used with the equipment listed in this schedule] |
[F21ex 8419 50 20 or 8419 50 80 | Cryogenic exchangers in the LNG-process] |
[F21ex 8414 10 81 | Cryogenic pumps in the LNG-process] |
ex 8419 89 98 ex 8419 89 30 ex 8419 89 10 | Delayed cokers |
ex 8419 89 98 ex 8419 89 30 ex 8419 89 10 | Flexicoking units |
ex 8479 89 97 | Hydrocracking reactors |
ex 8419 89 98 ex 8419 89 30 ex 8419 89 10 ex 8479 89 97 | Hydrocracking reactor vessels |
ex 8479 89 97 ex 8543 70 90 | Hydrogen generation equipment |
[F23ex 8419 60 00] [F23ex 8419 89 98] ex 8421 39 15 ex 8421 39 25 ex 8421 39 35 ex 8421 39 85 ex 8479 89 97 ex 8543 70 90 | Hydrogen recovery and purification equipment |
ex 8479 89 97 ex 8543 70 90 | Hydrotreatment equipment/units |
ex 8479 89 97 ex 8543 70 90 | Naphtha isomerisation units |
ex 8479 89 97 ex 8543 70 90 | Polymerisation units |
[F21ex 8418 69 00 | Process units for gas cooling in the LNG-process] |
[F21ex 8418 60 00 | Process units for the liquefaction of the natural gas] |
[F21ex 8419 40 00 | Process units for the separation and fractionation of the hydrocarbons in the LNG-process] |
[F24ex 8419 60 00] ex 8419 89 10 ex 8419 89 30 ex 8419 89 98 [F24ex 8421 39 35] [F24ex 8421 39 85] ex 8479 89 97 ex 8543 70 90 | Refinery fuel gas treatment and sulphur recovery equipment (including amine scrubbing units, sulphur recovery units, tail gas treatment units) |
ex 8456 90 00 ex 8479 89 97 ex 8543 70 90 | Solvent de-asphalting units |
ex 8479 89 97 ex 8543 70 90 | Sulphur production units |
ex 8479 89 97 ex 8543 70 90 | Sulphuric acid alkylation and sulphuric acid regeneration units |
ex 8419 89 10 ex 8419 89 30 ex 8419 89 98 ex 8479 89 97 ex 8543 70 90 | Thermal cracking units |
ex 8479 89 97 ex 8543 70 90 | Toluene and heavy aromatics: Transalkylation units |
ex 8479 89 97 ex 8543 70 90 | Visbreakers |
ex 8479 89 97 ex 8543 70 90 | Vacuum gas oil hydrocracking units |
Textual Amendments
F21Words in Sch. 2D para. 2 Table inserted (15.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 11) Regulations 2022 (S.I. 2022/792), regs. 1(2), 12(6) (with reg. 13)
F22Words in Sch. 2D para. 2 Table inserted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(5)(c)
F23Words in Sch. 2D para. 2 Table substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(5)(a)
F24Words in Sch. 2D para. 2 Table inserted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(5)(b)
3. Catalysts used in the following processes for the refining of crude oil to produce petroleum products—
(a)fluid catalytic cracking;
(b)hydroprocessing, including hydrotreating and hydrocracking,
(c)alkylation;
(d)catalytic reforming.
4. “Software” for the “development”, “production” or “use” of any thing falling within paragraphs 2 and 3.
5. “Technology” for the “development”, “production” or “use” of any thing falling within paragraphs 2 to 4.]
Regulation 21
Textual Amendments
F25Sch. 2E inserted (14.4.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 8) Regulations 2022 (S.I. 2022/452), reg. 1(2), Sch. Pt. 1
1.—(1) Terms printed in quotation marks and not defined or interpreted in this Schedule have the meaning given to them in—
(a)Schedules 2 and 3 to the Export Control Order 2008, or
(b)Annex I of the Dual-Use Regulation,
as applicable.
(2) For the purposes of this Schedule, the interpretative notes in Part 2 apply.
2. Equipment, “electronic assemblies” and components, specially designed for “quantum computers”, quantum electronics, quantum sensors, quantum processing units, qubit circuits, qubit devices or quantum radar systems.
Note 1: “Quantum computers” perform computations that harness the collective properties of quantum states, such as superposition, interference and entanglement.
Note 2: Units, circuits and devices include but are not limited to superconducting circuits, quantum annealing, ion trap, photonic interaction, silicon/spin and cold atoms.
3. “Cryogenic refrigeration systems” designed to maintain temperatures below 1.1 kelvin for 48 hours or more and related cryogenic refrigeration equipment and components as follows:
(a)pulse tubes;
(b)cryostats;
(c)dewars;
(d)gas handling systems (GHS);
(e)compressors;
(f)control units.
Note: “Cryogenic refrigeration systems” include but are not limited to dilution refrigeration, adiabatic demagnisation refrigerators and laser cooling systems.
4. Ultra-High vacuum (“UHV”) equipment as follows—
(a)UHV pumps (sublimation, turbomolecular, diffusion, cryogenic, ion-getter);
(b)UHV pressure gauges.
Note: UHV means 100 nanoPascals (nPa) or lower
5. High quantum efficiency (“QE”) photodetectors and sources with a QE greater than 80% in the wavelength range exceeding [F26400] nanometers but not exceeding [F271,600] nanometers.
Textual Amendments
F26Words in Sch. 2E para. 5 substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(6)(a)
F27Words in Sch. 2E para. 5 substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(6)(b)
6. Manufacturing equipment as follows—
(a)additive manufacturing equipment for the production of metal parts;
(b)additive manufacturing equipment for “energetic materials”, including equipment using ultrasonic extrusion;
(c)vat photopolymerisation additive manufacturing equipment using stereo lithography (SLA) or direct light processing (DLP).
Note: Paragraph 6(a) only applies to the following systems—
(i)i)powder-bed systems using selective laser melting (SLM), laser cladding, direct metal laser sintering (DMLS) or electron beam melting (ELB), or
(ii)powder-fed systems using laser cladding, direct energy deposition or laser metal deposition.
7. Metal powders and metal alloy powders specially designed for the additive manufacturing equipment specified in paragraph 6(a).
8. Microscopes, related equipment and detectors, as follows—
(a)scanning electron microscopes (SEM);
(b)scanning auger microscopes;
(c)transmission electron microscopes (TEM);
(d)atomic force microscopes (AFM);
(e)scanning force microscopes (SFM);
(f)equipment and detectors specially designed for use with the microscopes specified in sub-paragraphs (a) to (e), employing any of the following—
(i)X-ray photo spectroscopy (XPS);
(ii)energy-dispersive X-ray spectroscopy (EDX, EDS);
(iii)electron back scatter detector (EBSD) systems;
(iv)electron spectroscopy for chemical analysis (ESCA).
9. “Decapsulation” equipment for semiconductor devices.
Note: “Decapsulation” means the removal of a cap, lid, or encapsulating material from a packaged integrated circuit by mechanical, thermal, or chemical methods.
10. “Software” specially designed or modified for the “development”, “production” or “use” of the systems, equipment and components specified in paragraphs 2 to 9.
11. “Software” for digital twins (DT) of additive manufactured products or for the determination of the reliability of additive manufactured products.
12. “Technology” “required” for the “development”, “production” or “use” of the systems, equipment, components and software specified in paragraphs 2 to 11.]
Regulation 21
1.—(1) For the purposes of this Schedule—
(a)a thing “falls within” a commodity code if it is, or would be, classified under that commodity code, as set out in the Goods Classification Table;
(b)a thing “falls within” a chapter if it is, or would be, classified under that chapter, as set out in the Goods Classification Table;
(c)where a commodity code or chapter is preceded by “ex”, the goods specified in this Schedule constitute only a part of the scope of the commodity code or chapter and must fall within both the description given to that code or chapter in this Schedule and the scope of the code or chapter in the Goods Classification Table.
(2) For the purposes of determining whether or not a thing is, or would be, “classified” in accordance with sub-paragraph (1), the rules of interpretation contained in the following have effect—
(a)Part Two (Goods Classification Table Rules of Interpretation) of the Tariff of the United Kingdom;
(b)notes to a section or chapter of the Goods Classification Table.
(3) For the purposes of this paragraph—
“commodity code” includes a code denoting a heading or sub-heading;
“the Goods Classification Table” means the table so named in Annex Ⅰ in Part Three of the Tariff of the United Kingdom;
“the Tariff of the United Kingdom” means the document containing the legal classification and import rate for products being imported into the United Kingdom, entitled “The Tariff of the United Kingdom”, as revised or re-issued from time to timeM3 [F28, including by any document published under regulations made under section 8(1) of the Taxation (Cross-border Trade) Act 2018 replacing the same in whole or in part].
Textual Amendments
F28Words in Sch. 3 para. 1(3) inserted (31.12.2020 immediately after IP completion day) by The Sanctions (EU Exit) (Miscellaneous Amendments) (No. 2) Regulations 2020 (S.I. 2020/590), regs. 1(2), 10(14); S.I. 2020/1514, reg. 4
Commencement Information
I26Sch. 3 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Marginal Citations
M3The Tariff of the United Kingdom, Version 1.0, is available electronically from: https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/785939/Tariff_Reference_Document_13_March_2019.pdf. A hard copy is available for inspection free of charge at the offices of HMRC at 100 Parliament Street, London, SW1A 2BQ.
2. Any thing falling within the following commodity codes—U.K.
7304 11 00
7304 19 10
7304 19 30
7304 19 90
7304 22 00
7304 23 00
7304 29 10
7304 29 30
7304 29 90
7305 11 00
7305 12 00
7305 19 00
7305 20 00
7306 11
7306 19
7306 21 00
7306 29 00
8207 13 00
8207 19 10
8413 82 00
8413 92 00
8430 49 00
8705 20 00
8905 20 00
8905 90 10
Commencement Information
I27Sch. 3 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
3. Any thing falling—U.K.
(a)within a commodity code mentioned in column 1 of the following table; and
(b)within the description in column 2 beside that code.
Code | Description |
ex 8413 50 | Reciprocating positive displacement pumps for liquids, power-driven with a maximum flow-rate greater than 18 m 3 /hour and a maximum outlet pressure greater than 40 bar, specially designed to pump drilling muds and/or cement into oil wells |
ex 8413 60 | Rotary positive displacement pumps for liquids, power-driven with a maximum flow-rate greater than 18 m 3 /hour and a maximum outlet pressure greater than 40 bar, specially designed to pump drilling muds and/or cement into oil wells |
ex 8431 39 00 | Parts suitable for use solely or principally with the oil field machinery of heading 8428 |
ex 8431 43 00 | Parts suitable for use solely or principally with the oil field machinery of subheadings 8430 41 or 8430 49 |
ex 8431 49 | Parts suitable for use solely or principally with the oil field machinery of heading 8426, 8429 and 8430 |
Commencement Information
I28Sch. 3 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
[F293A. Any thing falling within the first column of the following table.U.K.
Item | Regulation 53A applies? |
---|---|
a. Oil and gas exploration data, e.g., seismic analysis data. | |
b. Hydraulic fracturing items, as follows: | |
b.1. Hydraulic fracturing design and analysis software and data. | |
b.2. Hydraulic fracturing proppant, fracking fluid, and chemical additives therefor. | Yes |
b.3. High pressure pumps. | Yes] |
Textual Amendments
F29Sch. 3 para. 3A inserted (15.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 11) Regulations 2022 (S.I. 2022/792), regs. 1(2), 12(7) (with reg. 13)
4. Any thing falling within the following chapters—U.K.
(a)chapters 25 to 29;
(b)chapters 72 to 76;
(c)chapters 78 to 81;
(d)chapter 86;
(e)chapters 88 and 89; and
(f)chapter 98.
Commencement Information
I29Sch. 3 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
5. Any thing falling within the following commodity codes—U.K.
3824
3826 00
8207 13 00
8207 19 10
8401 to 8418
8420 to 8432
8435 to 8437
8439 to 8443
8444 00
8445
8447
8448
8449 00 00
8450
8452 to 8468
8470 to 8484
8486
8487
8501 to 8505
8507
8511
8514
8515
8525 to 8548
8701
8702
8704
8705
8706 00
8709
8710 00 00
8716
7106 to 7112
9013 to 9015
9025 to 9033
Commencement Information
I30Sch. 3 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Regulation 21
Textual Amendments
F30Sch. 3A inserted (14.4.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 8) Regulations 2022 (S.I. 2022/452), reg. 1(2), Sch. Pt. 2
1.—(1) Paragraph 1 of Schedule 3 applies for the purposes of interpreting Part 2.
(2) In Part 2, “sales price” means the sales price of the item or quantity specified excluding value added taxes.
(3) For the purposes of this Schedule, where a sales price is specified per item, “item” is to be construed as the unit usually packaged for retail sale (where applicable), whether a singular good or a number of goods if packaged to be sold together.
2. Horses, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price exceeds £250 per animal—
Commodity code | Description |
---|---|
0101 21 00 | Pure-bred breeding animals |
0101 29 90 | Other |
3. Caviar and caviar substitutes, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price exceeds £250 per 1.5kg, or equivalent per item—
Commodity code | Description |
---|---|
1604 31 00 | Caviar |
1604 32 00 | Caviar substitutes |
4. Truffles and preparations thereof falling within the commodity codes set out in the following table, provided that the sales price exceeds £250 per 1.5kg, or equivalent per item—
Commodity code | Description |
---|---|
0709 56 00 | Truffles |
0710 80 69 | Other |
0711 59 00 | Other |
0712 39 00 | Other |
2001 90 97 | Other |
2003 90 10 | Truffles |
2103 90 90 | Other |
2104 10 00 | Soups and broths and preparations therefor |
2104 20 00 | Homogenised composite food preparations |
2106 00 00 | Food preparations not elsewhere specified or included |
5. Wines (including sparkling wines), beers, spirits and spirituous beverages, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
2203 00 00 | Beer made from malt |
2204 10 11 | Champagne |
2204 10 91 | Asti spumante |
2204 10 93 | Other |
2204 10 94 | With a protected geographical indication (PGI) |
2204 10 96 | Other varietal wines |
2204 10 98 | Other |
2204 21 00 | In containers holding 2 litres or less |
2204 29 00 | Other |
2205 00 00 | Vermouth and other wine of fresh grapes flavoured with plants or aromatic substances |
2206 00 00 | Other fermented beverages (for example, cider, perry, mead, saké); mixtures of fermented beverages and mixtures of fermented beverages with non-alcoholic beverages, not elsewhere specified or included |
2207 10 00 | Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol or higher |
2208 00 00 | Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages |
6. Cigars or cigarillos falling within the commodity codes set out in the table below, provided that the sales price per item exceeds £10—
Commodity code | Description |
---|---|
2402 10 00 | Cigars, cheroots and cigarillos, containing tobacco |
2402 90 00 | Other |
7. Perfumes, toilet waters and cosmetics, including beauty and make-up products, meaning any thing which falls within the following commodity codes, provided that the sales price exceeds the price corresponding to that code set out in the third column of the table—
Commodity code | Description | Sales price |
---|---|---|
3303 | Perfumes and toilet waters | £250 per 6.25 litres |
3304 00 00 | Beauty or make-up preparations and preparations for the care of the skin (other than medicaments), including sunscreen or suntan preparations; manicure or pedicure preparations | £250 per item or 6.25 litres if liquid |
3305 00 00 | Preparations for use on the hair | £250 per item or 6.25 litres if liquid |
3307 00 00 | Pre-shave, shaving or aftershave preparations, personal deodorants, bath preparations, depilatories and other perfumery, cosmetic or toilet preparations, not elsewhere specified or included; prepared room deodorisers, whether or not perfumed or having disinfectant properties | £250 per item or 6.25 litres if liquid |
6704 00 00 | Wigs, false beards, eyebrows and eyelashes, switches and the like, of human or animal hair or of textile materials; articles of human hair not elsewhere specified or included | £250 per item |
8. Leather, saddlery, travel goods, handbags or similar articles, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
4201 00 00 | Saddlery and harness for any animal (including traces, leads, knee pads, muzzles, saddle-cloths, saddlebags, dog coats and the like), of any material |
4202 00 00 | Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverages bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarette-cases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper |
4205 00 90 | Other |
9605 00 00 | Travel sets for personal toilet, sewing or shoe or clothes cleaning |
9. Garments, clothing, accessories or shoes, meaning any thing which falls within the following commodity codes or chapters, provided that the sales price per item exceeds £250 —
Commodity code | Description |
---|---|
4203 00 00 | Articles of apparel and clothing accessories, of leather or of composition leather |
4303 00 00 | Articles of apparel, clothing accessories and other articles of furskin |
6101 00 00 | Men’s or boys’ overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6103 |
6102 00 00 | Women’s or girls’ overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading 6104 |
6103 00 00 | Men’s or boys suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted |
6104 00 00 | Women’s or girls’ suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted |
6105 00 00 | Men’s or boys’ shirts, knitted or crocheted |
6106 00 00 | Women’s or girls’ blouses, shirts and shirt-blouses, knitted or crocheted |
6107 00 00 | Men’s or boys’ underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles, knitted or crocheted |
6108 00 00 | Women’s or girls’ slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles, knitted or crocheted |
6109 00 00 | T-shirts, singlets and other vests, knitted or crocheted |
6110 00 00 | Jerseys, pullovers, cardigans, waistcoats and similar articles, knitted or crocheted |
6111 00 00 | Babies’ garments and clothing accessories, knitted or crocheted |
6112 11 00 | Of cotton |
6112 12 00 | Of synthetic fibres |
6112 19 00 | Of other textile materials |
6112 20 00 | Ski suits |
6112 31 00 | Of synthetic fibres |
6112 39 00 | Of other textile materials |
6112 41 00 | Of synthetic fibres |
6112 49 00 | Of other textile materials |
6113 00 10 | Of knitted or crocheted fabrics of heading 5906 |
6113 00 90 | Other |
6114 00 00 | Other garments, knitted or crocheted |
6115 00 00 | Pantyhose, tights, stockings, socks and other hosiery, including graduated compression hosiery (for example, stockings for varicose veins) and footwear without applied soles, knitted or crocheted |
6116 00 00 | Gloves, mittens and mitts, knitted or crocheted |
6117 00 00 | Other made-up clothing accessories, knitted or crocheted; knitted or crocheted parts of garments or of clothing accessories |
6201 00 00 | Men’s or boys’ overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6203 |
6202 00 00 | Women’s or girls overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading 6204 |
6203 00 00 | Men’s or boys’ suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear) |
6204 00 00 | Women’s or girls’ suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear) |
6205 00 00 | Men’s or boys’ shirts |
6206 00 00 | Women’s or girls’ blouses, shirts and shirt-blouses |
6207 00 00 | Men’s or boys singlets and other vests, underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles |
6208 00 00 | Women’s or girls’ singlets and other vests, slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles |
6209 00 00 | Babies’ garments and clothing accessories |
6210 10 00 | Of fabrics of heading 5602 or 5603 |
6210 20 00 | Other garments, of the type described in subheadings 6201 11 to 6201 19 |
6210 30 00 | Other garments, of the type described in subheadings 6202 11 to 6202 19 |
6210 40 00 | Other men’s or boys’ garments |
6210 50 00 | Other women’s or girls’ garments |
6211 11 00 | Men’s or boys’ |
6211 12 00 | Women’s or girls’ |
6211 20 00 | Ski suits |
6211 32 00 | Of cotton |
6211 33 00 | Of man-made fibres |
6211 39 00 | Of other textile materials |
6211 42 00 | Of cotton |
6211 43 00 | Of man-made fibres |
6211 49 00 | Of other textile materials |
6212 00 00 | Brassières, girdles, corsets, braces, suspenders, garters and similar articles and parts thereof, whether or not knitted or crocheted |
6213 00 00 | Handkerchiefs |
6214 00 00 | Shawls, scarves, mufflers, mantillas, veils and the like |
6215 00 00 | Ties, bow ties and cravats |
6216 00 00 | Gloves, mittens and mitts |
6217 00 00 | Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212 |
6401 00 00 | Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes |
6402 20 00 | Footwear with upper straps or thongs assembled to the sole by means of plugs |
6402 91 00 | Covering the ankle |
6402 99 00 | Other |
6403 19 00 | Other |
6403 20 00 | Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe |
6403 40 00 | Other footwear, incorporating a protective metal toecap |
6403 51 00 | Covering the ankle |
6403 59 00 | Other |
6403 91 00 | Covering the ankle |
6403 99 00 | Other |
6404 19 10 | Slippers and other indoor footwear |
6404 20 00 | Footwear with outer soles of leather or composition leather |
6405 00 00 | Other footwear |
6504 00 00 | Hats and other headgear, plaited or made by assembling strips of any material, whether or not lined or trimmed |
6505 00 10 | Of fur felt or of felt of wool and fur, made from the hat bodies, hoods or plateaux of heading 6501 00 00 |
6505 00 30 | Peaked caps |
6505 00 90 | Other |
6506 99 00 | Of other materials |
6601 91 00 | Having a telescopic shaft |
6601 99 00 | Other |
6602 00 00 | Walking sticks, seat-sticks, whips, riding-crops and the like |
9619 00 81 | Napkins and napkin liners for babies |
10. Carpets, rugs and tapestries, hand-made or not, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
5701 00 00 | Carpets and other textile floor coverings, knotted, whether or not made up |
5702 10 00 | ‘Kelem’, ‘Schumacks’, ‘Karamanie’ and similar hand-woven rugs |
5702 20 00 | Floor coverings of coconut fibres (coir) |
5702 31 80 | Other |
5702 32 00 | Of man-made textile materials |
5702 39 00 | Of other textile materials |
5702 41 90 | Other |
5702 42 00 | Of man-made textile materials |
5702 50 00 | Other, not of pile construction, not made up |
5702 91 00 | Of wool or fine animal hair |
5702 92 00 | Of man-made textile materials |
5702 99 00 | Of other textile materials |
5703 00 00 | Carpets and other textile floor coverings, tufted, whether or not made up |
5704 00 00 | Carpets and other textile floor coverings, of felt, not tufted or flocked, whether or not made up |
5705 00 00 | Other carpets and other textile floor coverings, whether or not made up |
5805 00 00 | Hand-woven tapestries of the type Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up |
11. Pearls, precious and semi-precious stones, articles of pearls, jewellery, gold- or silversmith articles falling within the commodity codes set out in the following table—
Commodity code | Description |
---|---|
7101 00 00 | Pearls, natural or cultured, whether or not worked or graded but not strung, mounted or set; pearls, natural or cultured, temporarily strung for convenience of transport |
7102 00 00 | Diamonds, whether or not worked, but not mounted or set, excluding for industrial use |
7103 00 00 | Precious stones (other than diamonds) and semi-precious stones, whether or not worked or graded but not strung, mounted or set; ungraded precious stones (other than diamonds) and semi-precious stones, temporarily strung for convenience of transport |
7104 91 00 | Diamonds, excluding for industrial use |
7105 00 00 | Dust and powder of natural or synthetic precious or semi-precious stones |
7106 00 00 | Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form |
7107 00 00 | Base metals clad with silver, not further worked than semi-manufactured |
7108 00 00 | Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form |
7109 00 00 | Base metals or silver, clad with gold, not further worked than semi-manufactured |
7110 11 00 | Unwrought or in powder form |
7110 19 00 | Other |
7110 21 00 | Unwrought or in powder form |
7110 29 00 | Other |
7110 31 00 | Unwrought or in powder form |
7110 39 00 | Other |
7110 41 00 | Unwrought or in powder form |
7110 49 00 | Other |
7111 00 00 | Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured |
7113 00 00 | Articles of jewellery and parts thereof, of precious metal or of metal clad with precious metal |
7114 00 00 | Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of precious metal or of metal clad with precious metal |
7115 00 00 | Other articles of precious metal or of metal clad with precious metal |
7116 00 00 | Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed) |
12. Coins and banknotes, meaning any thing which falls within the commodity codes set out in the following table, provided that such items are not legal tender, —
Commodity code | Description |
---|---|
4907 00 30 | Banknotes |
7118 10 00 | Coin (other than gold coin), not being legal tender |
7118 90 00 | Other |
13. Any item of cutlery, bladed or edged instruments and tools falling within the commodity codes set out in the following table, provided such items are comprised of precious metal or plated or clad with precious metal —
Commodity code | Description |
---|---|
7114 00 00 | Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of precious metal or of metal clad with precious metal |
7115 00 00 | Other articles of precious metal or of metal clad with precious metal |
8214 00 00 | Other articles of cutlery (for example, hair clippers, butchers’ or kitchen cleavers, choppers and mincing knives, paperknives); manicure or pedicure sets and instruments (including nail files) |
8215 00 00 | Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware |
9307 00 00 | Swords, cutlasses, bayonets, lances and similar arms and parts thereof and scabbards and sheaths therefor |
14. Tableware of porcelain, china, stoneware or earthenware or fine pottery falling within within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
6911 00 00 | Tableware, kitchenware, other household articles and toilet articles, of porcelain or china |
6912 00 23 | Stoneware |
6912 00 25 | Earthenware or fine pottery |
6912 00 83 | Stoneware |
6912 00 85 | Earthenware or fine pottery |
6914 10 00 | Of porcelain or china |
6914 90 00 | Other |
15. Items of lead crystal falling within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
7009 91 00 | Unframed |
7009 92 00 | Framed |
7010 00 00 | Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass |
7013 22 00 | Of lead crystal |
7013 33 00 | Of lead crystal |
7013 41 00 | Of lead crystal |
7013 91 00 | Of lead crystal |
7018 10 00 | Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares |
7018 90 00 | Other |
7020 00 80 | Other |
9405 50 00 | Non-electrical lamps and lighting fittings |
9405 91 00 | Of glass |
16. Electronic items for domestic use, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £630—
Commodity code | Description |
---|---|
8414 51 | Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 watts |
8414 59 00 | Other |
8414 60 00 | Hoods having a maximum horizontal side not exceeding 120 cm |
8415 10 00 | Window or wall types, self-contained or ‘split-system’ |
8418 10 00 | Combined refrigerator-freezers, fitted with separate external doors |
8418 21 00 | Compression-type |
8418 29 00 | Other |
8418 30 00 | Freezers of the chest type, not exceeding 800 litres capacity |
8418 40 00 | Freezers of the upright type, not exceeding 900 litres capacity |
8419 81 00 | For making hot drinks or for cooking or heating food |
8422 11 00 | Of the household type |
8423 10 00 | Personal weighing machines, including baby scales; household scales |
8443 12 00 | Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22 cm and the other side not exceeding 36 cm in the unfolded state) |
8443 31 00 | Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a network |
8443 32 00 | Other, capable of connecting to an automatic data-processing machine or to a network |
8443 39 00 | Other |
8450 11 00 | Fully-automatic machines |
8450 12 00 | Other machines, with built-in centrifugal drier |
8450 19 00 | Other |
8451 21 00 | Each of a dry linen capacity not exceeding 10 kg |
8452 10 00 | Sewing machines of the household type |
8470 10 00 | Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functions |
8470 21 00 | Incorporating a printing device |
8470 29 00 | Other |
8470 30 00 | Other calculating machines |
8471 00 00 | Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included |
8472 90 80 | Other |
8479 60 00 | Evaporative air coolers |
8508 11 00 | Of a power not exceeding 1,500 watts and having a dust bag or other receptacle capacity not exceeding 20 litres |
8508 19 00 | Other |
8508 60 00 | Other vacuum cleaners |
8509 80 00 | Other appliances |
8516 31 00 | Hairdryers |
8516 50 00 | Microwave ovens |
8516 60 10 | Cookers (incorporating at least an oven and a hob) |
8516 71 00 | Coffee or tea makers |
8516 72 00 | Toasters |
8516 79 00 | Other |
8517 11 00 | Line telephone sets with cordless handsets |
8517 13 00 | Smartphones |
8517 18 00 | Other |
8517 61 00 | Base stations |
8517 62 00 | Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus |
8517 69 00 | Other |
8526 91 00 | Radio navigational aid apparatus |
8529 10 65 | Inside aerials for radio or television broadcast receivers, including built-in types |
8529 10 69 | Other |
8531 10 00 | Burglar or fire alarms and similar apparatus |
8543 70 10 | Electrical machines with translation or dictionary functions |
8543 70 30 | Aerial amplifiers |
8543 70 50 | Sunbeds, sunlamps and similar suntanning equipment |
8543 70 90 | Other |
9504 50 00 | Video game consoles and machines, other than those of subheading 9504 30 |
9504 90 80 | Other |
17. Electrical/electronic or optical apparatus for recording and reproducing sound and images, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £840—
Commodity code | Description |
---|---|
8519 00 00 | Sound recording or sound reproducing apparatus |
8521 00 00 | Video recording or reproducing apparatus, whether or not incorporating a video tuner |
8527 00 00 | Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock |
8528 71 00 | Not designed to incorporate a video display or screen |
8528 72 00 | Other, colour |
9006 00 00 | Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than discharge lamps of heading 8539 |
9007 00 00 | Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus |
18. Vehicles, except ambulances, for the transport of persons on earth, air or sea, teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars and motorbikes, as well as their accessories and spare parts, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price exceeds—
(a)£42,000 per vehicle,
(b)£4,200 per teleferic, chairlift, ski-dragline, traction mechanism for funiculars or motorbike, or
(c)£420 per accessory or spare part,
as applicable—
Commodity code | Description |
---|---|
4011 10 00 | Of a kind used on motor cars (including station wagons and racing cars) |
4011 20 00 | Of a kind used on buses or lorries |
4011 30 00 | Of a kind used on aircraft |
4011 40 00 | Of a kind used on motorcycles |
4011 90 00 | Other |
7009 10 00 | Rear-view mirrors for vehicles |
8407 00 00 | Spark-ignition reciprocating or rotary internal combustion piston engines |
8408 00 00 | Compression-ignition internal combustion piston engines (diesel or semi-diesel engines) |
8409 00 00 | Parts suitable for use solely or principally with the engines of heading 8407 or 8408 |
8411 00 00 | Turbojets, turbopropellers and other gas turbines |
8428 60 00 | Teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars |
8431 39 00 | Parts and acccessories of teleferics, chairlifts, ski-draglines, traction mechanisms for funiculars |
8483 00 00 | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints) |
8511 00 00 | Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, sparking plugs and glow plugs, starter motors); generators (for example, dynamos, alternators) and cut-outs of a kind used in conjunction with such engines |
8512 20 00 | Other lighting or visual signalling equipment |
8512 30 10 | Burglar alarms of a kind used for motor vehicles |
8512 30 90 | Other |
8512 40 00 | Windscreen wipers, defrosters and demisters |
8544 30 00 | Ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships |
8603 00 00 | Self-propelled railway or tramway coaches, vans and trucks, other than those of heading 8604 |
8605 00 00 | Railway or tramway passenger coaches, not self-propelled; luggage vans, post office coaches and other special purpose railway or tramway coaches, not self-propelled (excluding those of heading 8604 ) |
8607 00 00 | Parts of railway or tramway locomotives or rolling stock |
8702 00 00 | Motor vehicles for the transport of ten or more persons, including the driver |
8703 00 00 | Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading 8702), including station wagons and racing cars, including snowmobiles |
8706 00 00 | Chassis fitted with engines, for the motor vehicles of headings 8701 to 8705 |
8707 00 00 | Bodies (including cabs), for the motor vehicles of headings 8701 to 8705 |
8708 00 00 | Parts and accessories of the motor vehicles of headings 8701 to 8705 |
8711 00 00 | Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars |
8712 00 00 | Bicycles and other cycles (including delivery tricycles), not motorised |
8714 00 00 | Parts and accessories of vehicles of headings 8711 to 8713 |
8716 10 00 | Trailers and semi-trailers of the caravan type, for housing or camping |
8716 40 00 | Other trailers and semi-trailers |
8716 90 00 | Parts |
8901 10 00 | Cruise ships, excursion boats and similar vessels principally designed for the transport of persons; ferry-boats of all kinds |
8901 90 00 | Other vessels for the transport of goods and other vessels for the transport of both persons and goods |
8903 00 00 | Yachts and other vessels for pleasure or sports; rowing boats and canoes |
19. Clocks and watches and their parts, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
9101 00 00 | Wristwatches, pocket-watches and other watches, including stopwatches, with case of precious metal or of metal clad with precious metal |
9102 00 00 | Wristwatches, pocket-watches and other watches, including stopwatches, other than those of heading 9101 |
9103 00 00 | Clocks with watch movements, excluding clocks of heading 9104 |
9104 00 00 | Instrument panel clocks and clocks of a similar type for vehicles, aircraft, spacecraft or vessels |
9105 00 00 | Other clocks |
9108 00 00 | Watch movements, complete and assembled |
9109 00 00 | Clock movements, complete and assembled |
9110 00 00 | Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements |
9111 00 00 | Watch cases and parts thereof |
9112 00 00 | Clock cases and cases of a similar type for other goods of this chapter, and parts thereof |
9113 00 00 | Watch straps, watch bands and watch bracelets, and parts thereof |
9114 00 00 | Other clock or watch parts |
20. Musical instruments, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £1260—
Commodity code | Description |
---|---|
9201 00 00 | Pianos, including automatic pianos; harpsichords and other keyboard stringed instruments |
9202 00 00 | Other string musical instruments (for example, guitars, violins, harps) |
9205 00 00 | Wind musical instruments (for example, keyboard pipe organs, accordions, clarinets, trumpets, bagpipes), other than fairground organs and mechanical street organs |
9206 00 00 | Percussion musical instruments (for example, drums, xylophones, cymbals, castanets, maracas) |
9207 00 00 | Musical instruments, the sound of which is produced, or must be amplified, electrically (for example, organs, guitars, accordions) |
21. Works of art, collectors’ pieces and antiques, meaning any thing which falls within chapter 97.
22. Articles and equipment for sports, including skiing, golf, diving and water sports, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
4015 19 00 | Other |
4015 90 00 | Other |
6210 40 00 | Other men’s or boys’ garments |
6210 50 00 | Other women’s or girls’ garments |
6211 11 00 | Men’s or boys’ |
6211 12 00 | Women’s or girls’ |
6211 20 00 | Ski suits |
6216 00 00 | Gloves, mittens and mitts |
6402 12 00 | Ski-boots, cross-country ski footwear and snowboard boots |
6402 19 00 | Other |
6403 12 00 | Ski-boots, cross-country ski footwear and snowboard boots |
6403 19 00 | Other |
6404 11 00 | Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like |
6404 19 90 | Other |
9004 90 00 | Other |
9020 00 00 | Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters |
9506 11 00 | Skis |
9506 12 00 | Ski-fastenings (ski-bindings) |
9506 19 00 | Other |
9506 21 00 | Sailboards |
9506 29 00 | Other |
9506 31 00 | Clubs, complete |
9506 32 00 | Golf balls |
9506 39 00 | Other |
9506 40 00 | Articles and equipment for table tennis |
9506 51 00 | Lawn-tennis rackets, whether or not strung |
9506 59 00 | Other |
9506 61 00 | Lawn-tennis balls |
9506 69 10 | Cricket and polo balls |
9506 69 90 | Other |
9506 70 | Ice skates and roller skates, including skating boots with skates attached |
9506 91 | Articles and equipment for general physical exercise, gymnastics or athletics |
9506 99 10 | Cricket and polo equipment, other than balls |
9506 99 90 | Other |
9507 00 00 | Fishing rods, fish-hooks and other line fishing tackle; fish landing nets, butterfly nets and similar nets; decoy ‘birds’ (other than those of heading 9208 or 9705) and similar hunting or shooting requisites |
23. Articles and equipment for billiards, automatic bowling, casino games and games operated by coins, banknotes, bank cards, tokens or by any other means of payment, video games consoles and amusement machines, meaning any thing which falls within the commodity codes set out in the following table, provided that the sales price per item exceeds £250—
Commodity code | Description |
---|---|
9504 20 00 | Articles and accessories for billiards of all kinds |
9504 30 00 | Other games, operated by coins, banknotes, bank cards, tokens or by any other means of payment, other than automatic bowling alley equipment |
9504 40 00 | Playing cards |
9504 30 00 | Video game consoles and machines, other than those of subheading 9504 50 |
9504 90 80 | Other] |
Regulation 46C
Textual Amendments
F31Sch. 3B inserted (14.4.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 8) Regulations 2022 (S.I. 2022/452), reg. 1(2), Sch. Pt. 2
1. Paragraph 1 of Schedule 3 applies for the purposes of interpreting Part 2.
2. Any thing falling within a commodity code mentioned in column 1 of the following table—
Commodity code | Description |
---|---|
(1) GOES means Grain Oriented Electrical Steel.] | |
7208 10 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 25 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 26 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 27 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 36 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 37 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 38 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 39 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 40 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 52 99 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 53 90 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7208 54 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7211 14 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7211 19 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7212 60 00 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7225 19 10 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7225 30 10 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7225 30 30 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7225 30 90 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7225 40 15 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7225 40 90 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7226 19 10 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7226 91 20 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7226 91 91 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7226 91 99 | Non Alloy and Other Alloy Hot Rolled Sheets and Strips |
7209 15 00 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 16 90 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 17 90 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 18 91 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 25 00 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 26 90 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 27 90 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 28 90 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 90 20 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 90 80 | Non Alloy and Other Alloy Cold Rolled Sheets |
7211 23 20 | Non Alloy and Other Alloy Cold Rolled Sheets |
7211 23 30 | Non Alloy and Other Alloy Cold Rolled Sheets |
7211 23 80 | Non Alloy and Other Alloy Cold Rolled Sheets |
7211 29 00 | Non Alloy and Other Alloy Cold Rolled Sheets |
7211 90 20 | Non Alloy and Other Alloy Cold Rolled Sheets |
7211 90 80 | Non Alloy and Other Alloy Cold Rolled Sheets |
7225 50 20 | Non Alloy and Other Alloy Cold Rolled Sheets |
7225 50 80 | Non Alloy and Other Alloy Cold Rolled Sheets |
7226 20 00 | Non Alloy and Other Alloy Cold Rolled Sheets |
7226 92 00 | Non Alloy and Other Alloy Cold Rolled Sheets |
7209 16 10 | Electrical Sheets (other than GOES)(1) |
7209 17 10 | Electrical Sheets (other than GOES) |
7209 18 10 | Electrical Sheets (other than GOES) |
7209 26 10 | Electrical Sheets (other than GOES) |
7209 27 10 | Electrical Sheets (other than GOES) |
7209 28 10 | Electrical Sheets (other than GOES) |
7225 19 90 | Electrical Sheets (other than GOES) |
7226 19 80 | Electrical Sheets (other than GOES) |
7210 41 00 20 | Metallic Coated Sheets |
7210 41 00 30 | Metallic Coated Sheets |
7210 49 00 20 | Metallic Coated Sheets |
7210 49 00 30 | Metallic Coated Sheets |
7210 61 00 20 | Metallic Coated Sheets |
7210 61 00 30 | Metallic Coated Sheets |
7210 69 00 20 | Metallic Coated Sheets |
7210 69 00 30 | Metallic Coated Sheets |
7212 30 00 20 | Metallic Coated Sheets |
7212 30 00 30 | Metallic Coated Sheets |
7212 50 61 20 | Metallic Coated Sheets |
7212 50 61 30 | Metallic Coated Sheets |
7212 50 69 20 | Metallic Coated Sheets |
7212 50 69 30 | Metallic Coated Sheets |
7225 92 00 20 | Metallic Coated Sheets |
7225 92 00 30 | Metallic Coated Sheets |
7225 99 00 11 | Metallic Coated Sheets |
7225 99 00 22 | Metallic Coated Sheets |
7225 99 00 23 | Metallic Coated Sheets |
7225 99 00 41 | Metallic Coated Sheets |
7225 99 00 45 | Metallic Coated Sheets |
7225 99 00 91 | Metallic Coated Sheets |
7225 99 00 92 | Metallic Coated Sheets |
7225 99 00 93 | Metallic Coated Sheets |
7226 99 30 10 | Metallic Coated Sheets |
7226 99 30 30 | Metallic Coated Sheets |
7226 99 70 11 | Metallic Coated Sheets |
7226 99 70 13 | Metallic Coated Sheets |
7226 99 70 91 | Metallic Coated Sheets |
7226 99 70 93 | Metallic Coated Sheets |
7226 99 70 94 | Metallic Coated Sheets |
7210 20 00 | Metallic Coated Sheets |
7210 30 00 | Metallic Coated Sheets |
7210 90 80 | Metallic Coated Sheets |
7212 20 00 | Metallic Coated Sheets |
7212 50 20 | Metallic Coated Sheets |
7212 50 30 | Metallic Coated Sheets |
7212 50 40 | Metallic Coated Sheets |
7212 50 90 | Metallic Coated Sheets |
7225 91 00 | Metallic Coated Sheets |
7226 99 10 | Metallic Coated Sheets |
7210 41 00 80 | Metallic Coated Sheets |
7210 49 00 80 | Metallic Coated Sheets |
7210 61 00 80 | Metallic Coated Sheets |
7210 69 00 80 | Metallic Coated Sheets |
7212 30 00 80 | Metallic Coated Sheets |
7212 50 61 80 | Metallic Coated Sheets |
7212 50 69 80 | Metallic Coated Sheets |
7225 92 00 80 | Metallic Coated Sheets |
7225 99 00 25 | Metallic Coated Sheets |
7225 99 00 95 | Metallic Coated Sheets |
7226 99 30 90 | Metallic Coated Sheets |
7226 99 70 19 | Metallic Coated Sheets |
7226 99 70 96 | Metallic Coated Sheets |
7210 70 80 | Organic Coated Sheets |
7212 40 80 | Organic Coated Sheets |
7209 18 99 | Tin Mill products |
7210 11 00 | Tin Mill products |
7210 12 20 | Tin Mill products |
7210 12 80 | Tin Mill products |
7210 50 00 | Tin Mill products |
7210 70 10 | Tin Mill products |
7210 90 40 | Tin Mill products |
7212 10 10 | Tin Mill products |
7212 10 90 | Tin Mill products |
7212 40 20 | Tin Mill products |
7208 51 20 | Non Alloy and Other Alloy Quarto Plates |
7208 51 91 | Non Alloy and Other Alloy Quarto Plates |
7208 51 98 | Non Alloy and Other Alloy Quarto Plates |
7208 52 91 | Non Alloy and Other Alloy Quarto Plates |
7208 90 20 | Non Alloy and Other Alloy Quarto Plates |
7208 90 80 | Non Alloy and Other Alloy Quarto Plates |
7210 90 30 | Non Alloy and Other Alloy Quarto Plates |
7225 40 12 | Non Alloy and Other Alloy Quarto Plates |
7225 40 40 | Non Alloy and Other Alloy Quarto Plates |
7225 40 60 | Non Alloy and Other Alloy Quarto Plates |
7219 11 00 | Stainless Hot Rolled Sheets and Strips |
7219 12 10 | Stainless Hot Rolled Sheets and Strips |
7219 12 90 | Stainless Hot Rolled Sheets and Strips |
7219 13 10 | Stainless Hot Rolled Sheets and Strips |
7219 13 90 | Stainless Hot Rolled Sheets and Strips |
7219 14 10 | Stainless Hot Rolled Sheets and Strips |
7219 14 90 | Stainless Hot Rolled Sheets and Strips |
7219 22 10 | Stainless Hot Rolled Sheets and Strips |
7219 22 90 | Stainless Hot Rolled Sheets and Strips |
7219 23 00 | Stainless Hot Rolled Sheets and Strips |
7219 24 00 | Stainless Hot Rolled Sheets and Strips |
7220 11 00 | Stainless Hot Rolled Sheets and Strips |
7220 12 00 | Stainless Hot Rolled Sheets and Strips |
7219 31 00 | Stainless Cold Rolled Sheets and Strips |
7219 32 10 | Stainless Cold Rolled Sheets and Strips |
7219 32 90 | Stainless Cold Rolled Sheets and Strips |
7219 33 10 | Stainless Cold Rolled Sheets and Strips |
7219 33 90 | Stainless Cold Rolled Sheets and Strips |
7219 34 10 | Stainless Cold Rolled Sheets and Strips |
7219 34 90 | Stainless Cold Rolled Sheets and Strips |
7219 35 10 | Stainless Cold Rolled Sheets and Strips |
7219 35 90 | Stainless Cold Rolled Sheets and Strips |
7219 90 20 | Stainless Cold Rolled Sheets and Strips |
7219 90 80 | Stainless Cold Rolled Sheets and Strips |
7220 20 21 | Stainless Cold Rolled Sheets and Strips |
7220 20 29 | Stainless Cold Rolled Sheets and Strips |
7220 20 41 | Stainless Cold Rolled Sheets and Strips |
7220 20 49 | Stainless Cold Rolled Sheets and Strips |
7220 20 81 | Stainless Cold Rolled Sheets and Strips |
7220 20 89 | Stainless Cold Rolled Sheets and Strips |
7220 90 20 | Stainless Cold Rolled Sheets and Strips |
7220 90 80 | Stainless Cold Rolled Sheets and Strips |
7219 21 10 | Stainless Hot Rolled Quarto Plates |
7219 21 90 | Stainless Hot Rolled Quarto Plates |
7214 30 00 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 91 10 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 91 90 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 99 31 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 99 39 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 99 50 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 99 71 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 99 79 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 99 95 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7215 90 00 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 10 00 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 21 00 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 22 00 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 40 10 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 40 90 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 50 10 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 50 91 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 50 99 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7216 99 00 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 10 20 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 20 10 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 20 91 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 30 20 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 30 41 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 30 49 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 30 61 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 30 69 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 30 70 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 30 89 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 60 20 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 60 80 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 70 10 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 70 90 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7228 80 00 | Non Alloy and Other Alloy Merchant Bars and Light Sections |
7214 20 00 | Rebars |
7214 99 10 | Rebars |
7222 11 11 | Stainless Bars and Light Sections |
7222 11 19 | Stainless Bars and Light Sections |
7222 11 81 | Stainless Bars and Light Sections |
7222 11 89 | Stainless Bars and Light Sections |
7222 19 10 | Stainless Bars and Light Sections |
7222 19 90 | Stainless Bars and Light Sections |
7222 20 11 | Stainless Bars and Light Sections |
7222 20 19 | Stainless Bars and Light Sections |
7222 20 21 | Stainless Bars and Light Sections |
7222 20 29 | Stainless Bars and Light Sections |
7222 20 31 | Stainless Bars and Light Sections |
7222 20 39 | Stainless Bars and Light Sections |
7222 20 81 | Stainless Bars and Light Sections |
7222 20 89 | Stainless Bars and Light Sections |
7222 30 51 | Stainless Bars and Light Sections |
7222 30 91 | Stainless Bars and Light Sections |
7222 30 97 | Stainless Bars and Light Sections |
7222 40 10 | Stainless Bars and Light Sections |
7222 40 50 | Stainless Bars and Light Sections |
7222 40 90 | Stainless Bars and Light Sections |
7221 00 10 | Stainless Wire Rod |
7221 00 90 | Stainless Wire Rod |
7213 10 00 | Non Alloy and Other Alloy Wire Rod |
7213 20 00 | Non Alloy and Other Alloy Wire Rod |
7213 91 10 | Non Alloy and Other Alloy Wire Rod |
7213 91 20 | Non Alloy and Other Alloy Wire Rod |
7213 91 41 | Non Alloy and Other Alloy Wire Rod |
7213 91 49 | Non Alloy and Other Alloy Wire Rod |
7213 91 70 | Non Alloy and Other Alloy Wire Rod |
7213 91 90 | Non Alloy and Other Alloy Wire Rod |
7213 99 10 | Non Alloy and Other Alloy Wire Rod |
7213 99 90 | Non Alloy and Other Alloy Wire Rod |
7227 10 00 | Non Alloy and Other Alloy Wire Rod |
7227 20 00 | Non Alloy and Other Alloy Wire Rod |
7227 90 10 | Non Alloy and Other Alloy Wire Rod |
7227 90 50 | Non Alloy and Other Alloy Wire Rod |
7227 90 95 | Non Alloy and Other Alloy Wire Rod |
7216 31 10 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7216 31 90 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7216 32 11 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7216 32 19 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7216 32 91 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7216 32 99 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7216 33 10 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7216 33 90 | Angles, Shapes and Sections of Iron or Non Alloy Steel |
7301 10 00 | Sheet Piling |
7302 10 22 | Railway Material |
7302 10 28 | Railway Material |
7302 10 40 | Railway Material |
7302 10 50 | Railway Material |
7302 40 00 | Railway Material |
7306 30 41 | Other tubes, pipes |
7306 30 49 | Other tubes, pipes |
7306 30 72 | Other tubes, pipes |
7306 30 77 | Other tubes, pipes |
7306 61 10 | Hollow sections |
7306 61 92 | Hollow sections |
7306 61 99 | Hollow sections |
7304 11 00 | Seamless Stainless Tubes and Pipes |
7304 22 00 | Seamless Stainless Tubes and Pipes |
7304 24 00 | Seamless Stainless Tubes and Pipes |
7304 41 00 | Seamless Stainless Tubes and Pipes |
7304 49 83 | Seamless Stainless Tubes and Pipes |
7304 49 85 | Seamless Stainless Tubes and Pipes |
7304 49 89 | Seamless Stainless Tubes and Pipes |
7304 19 10 | Other Seamless Tubes |
7304 19 30 | Other Seamless Tubes |
7304 19 90 | Other Seamless Tubes |
7304 23 00 | Other Seamless Tubes |
7304 29 10 | Other Seamless Tubes |
7304 29 30 | Other Seamless Tubes |
7304 29 90 | Other Seamless Tubes |
7304 31 20 | Other Seamless Tubes |
7304 31 80 | Other Seamless Tubes |
7304 39 30 | Other Seamless Tubes |
7304 39 50 | Other Seamless Tubes |
7304 39 82 | Other Seamless Tubes |
7304 39 83 | Other Seamless Tubes |
7304 39 88 | Other Seamless Tubes |
7304 51 81 | Other Seamless Tubes |
7304 51 89 | Other Seamless Tubes |
7304 59 82 | Other Seamless Tubes |
7304 59 83 | Other Seamless Tubes |
7304 59 89 | Other Seamless Tubes |
7304 90 00 | Other Seamless Tubes |
7305 11 00 | Large welded tubes |
7305 12 00 | Large welded tubes |
7305 19 00 | Large welded tubes |
7305 20 00 | Large welded tubes |
7305 31 00 | Large welded tubes |
7305 39 00 | Large welded tubes |
7305 90 00 | Large welded tubes |
7306 11 00 | Other Welded Pipes |
7306 19 00 | Other Welded Pipes |
7306 21 00 | Other Welded Pipes |
7306 29 00 | Other Welded Pipes |
7306 30 12 | Other Welded Pipes |
7306 30 18 | Other Welded Pipes |
7306 30 80 | Other Welded Pipes |
7306 40 20 | Other Welded Pipes |
7306 40 80 | Other Welded Pipes |
7306 50 21 | Other Welded Pipes |
7306 50 29 | Other Welded Pipes |
7306 50 80 | Other Welded Pipes |
7306 69 10 | Other Welded Pipes |
7306 69 90 | Other Welded Pipes |
7306 90 00 | Other Welded Pipes |
7215 10 00 | Non-alloy and other alloy cold finished bars |
7215 50 11 | Non-alloy and other alloy cold finished bars |
7215 50 19 | Non-alloy and other alloy cold finished bars |
7215 50 80 | Non-alloy and other alloy cold finished bars |
7228 10 90 | Non-alloy and other alloy cold finished bars |
7228 20 99 | Non-alloy and other alloy cold finished bars |
7228 50 20 | Non-alloy and other alloy cold finished bars |
7228 50 40 | Non-alloy and other alloy cold finished bars |
7228 50 61 | Non-alloy and other alloy cold finished bars |
7228 50 69 | Non-alloy and other alloy cold finished bars |
7228 50 80 | Non-alloy and other alloy cold finished bars |
7217 10 10 | Non Alloy Wire |
7217 10 31 | Non Alloy Wire |
7217 10 39 | Non Alloy Wire |
7217 10 50 | Non Alloy Wire |
7217 10 90 | Non Alloy Wire |
7217 20 10 | Non Alloy Wire |
7217 20 30 | Non Alloy Wire |
7217 20 50 | Non Alloy Wire |
7217 20 90 | Non Alloy Wire |
7217 30 41 | Non Alloy Wire |
7217 30 49 | Non Alloy Wire |
7217 30 50 | Non Alloy Wire |
7217 30 90 | Non Alloy Wire |
7217 90 20 | Non Alloy Wire |
7217 90 50 | Non Alloy Wire |
7217 90 90 | Non Alloy Wire |
Regulation 21
Textual Amendments
F32Sch. 3C inserted (15.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 11) Regulations 2022 (S.I. 2022/792), reg. 1(2), Sch. 3 (with reg. 13)
F33Sch. 3C heading substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), reg. 1(2)(b), Sch. 3 para. 8
1. Regulation 53A applies, subject to paragraph 2, in relation to all the goods and technology specified in Parts 2, 3 and 4.
2.—(1) For the purposes of this Schedule “CAS Number” when followed by a numerical sequence is a reference to the CAS Registry Numbers assigned to chemicals by the Chemical Abstracts Service.
(2) But regulation 53A applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS Number.
1. This Part applies to any goods which can perform any of the following functions (whether individually or as part of a system)—
(a)deep packet inspection;
(b)network interception, including associated systems management and data retention functions;
(c)radio frequency monitoring, including associated processing or examination;
(d)network and satellite jamming;
(e)remote infection;
(f)speaker recognition, including associated processing functions;
(g)IMSI, MSISDN, IMEI and TMSI interception and monitoring;
(h)tactical SMS, GSM, GPS, GPRS, UMTS, CDMA, and PSTN interception and monitoring;
(i)DHCP, SMTP and GTP information interception and monitoring;
(j)pattern recognition and pattern profiling;
(k)remote forensics;
(l)semantic processing;
(m)WEP and WPA code breaking;
(n)interception of VoIP (including proprietary and standard protocols).
2. Any software which can perform any of the functions described in paragraph 1(a) to (n) (whether individually or as part of a system).
3. Any software or other technology which is specially designed for the development, production or use of any goods or software described in paragraph 1 or 2.
4. For the purposes of this Part, the following terms have the meaning given to them in the Dual-Use Regulation—
“development”;
“production”;
“software”;
“technology”;
“use”.
1. Firearms, ammunition and related accessories, as follows—
(a)firearms;
(b)ammunition specially designed for firearms;
(c)weapon-sights.
2. Simulators for training persons to use firearms.
3. Bombs and grenades.
4.—(1) Subject to sub-paragraph (3), the following types of vehicles—
(a)vehicles equipped with a water cannon, specially designed or modified for the purpose of riot control;
(b)vehicles specially designed or modified to be electrified to repel boarders;
(c)vehicles specially designed or modified to remove barricades, including construction equipment with ballistic protection;
(d)vehicles specially designed for the transport or transfer of prisoners or detainees;
(e)vehicles specially designed to deploy mobile barriers.
(2) Components for the vehicles specified in sub-paragraphs (1)(a) to (e) that have been designed for the purposes of riot control.
(3) Vehicles that might otherwise fall within sub-paragraph (1)(a) to (e) are not internal repression goods if they are specially designed for the purposes of fire-fighting.
(4) For the purposes of this paragraph, “vehicle” includes a trailer.
5.—(1) Equipment and devices specially designed to initiate explosions by electrical or non-electrical means, including—
(a)firing sets;
(b)detonators; (codes for electric detonators and detonating caps);
(c)igniters;
(d)boosters;
(e)detonating cord.
(2) Components that have been specially designed for any thing mentioned in sub-paragraph (1).
(3) Sub-paragraphs (1) and (2) do not apply to any thing that has been specially designed for a specific commercial use.
(4) For the purpose of sub-paragraph (3), a “specific commercial use” means the actuation or operation by explosive means of other equipment or devices the function of which is not the creation of explosions, including—
(a)car air-bag inflaters;
(b)electric-surge arresters;
(c)fire sprinkler actuators.
(5) Linear cutting explosive charges.
(6) The following explosives and related substances—
(a)amatol;
(b)nitrocellulose (containing more than 12.5 % nitrogen);
(c)nitroglycol;
(d)pentaerythritol tetranitrate (PETN);
(e)picryl chloride;
(f)2,4,6-trinitrotoluene (TNT).
6.—(1) Subject to sub-paragraph (2), the following equipment designed for the protection of a person—
(a)body armour providing ballistic or stabbing protection or both;
(b)helmets providing ballistic or fragmentation protection, or both, including anti-riot helmets;
(c)anti-riot shields and ballistic shields.
(2) Sub-paragraph (1) does not apply to—
(a)any thing specially designed to protect persons for the following purposes—
(i)participation in competitive sport;
(ii)ensuring safety at work;
(b)any thing mentioned in sub-paragraph (1)(a) or (b) when accompanying a person for that person’s own protection.
7. Night vision equipment.
8. Thermal imaging equipment.
9. Image intensifier tubes.
10. Razor barbed wire.
11. The following types of knives—
(a)knives that are designed for use by military personnel (military knives);
(b)knives that are designed for use as a weapon for inflicting injury (combat knives);
(c)bayonets with blade lengths in excess of 10 cm.
12. Law enforcement striking weapons, including saps, police batons, side handle batons, tonfas, sjamboks, and whips.
13.—(1) Handcuffs, straitjackets and specially designed components and accessories.
(2) Sub-paragraph (1) does not apply to—
(a)medical devices that are equipped to restrain patient movement during medical procedures;
(b)devices which confine memory impaired patients to appropriate medical facilities.
14. Technology exclusively for the development or production of equipment controlled by paragraph 15.
15. Chemical agents, including tear gas formulation containing 1 per cent. or less of orthochlorobenzalmalononitrile (CS), or 1 per cent. or less of chloroacetophenone (CN), except in individual containers with a net weight of 20 grams or less; liquid pepper except when packaged in individual containers with a net weight of 3 ounces (85.05 grams) or less; smoke bombs; non-irritant smoke flares, canisters, grenades and charges; and other pyrotechnic articles having dual military and commercial use, and specially designed components thereof.
16. Fingerprinting powders, dyes, and inks.
17. Any equipment which is specially designed or modified for the development or for one or more of the production phases of any item mentioned in paragraphs 1 to 13 of this Part.
18. Any software which is specially designed for the simulators mentioned in paragraph 2.
19. Any technology which is specially designed for the development, production or use of any item mentioned in paragraphs 1 to 11.
20.—(1) In this Part, “firearm” means any portable barrelled weapon that expels, is designed to expel or may be converted to expel, a shot, bullet or projectile by the action of a combustible propellant.
(2) For the purposes of this Schedule, the following terms have the meaning given to them in Annex I of the Dual-Use Regulation—
“development”;
“production”;
“software”;
“technology”;
“use”.
Chemical Name | CAS Number | Regulation 53A applies? |
---|---|---|
Aluminium chloride | (7446-70-0) | |
Dichloromethane | (75-09-2) | |
N,N-Dimethylaniline | (121-69-7) | |
Isopropyl bromide | (75-26-3) | |
Isopropyl ether | (108-20-3) | |
Monoisopropylamine | (75-31-0) | |
Potassium Bromide | (7758-02-3) | |
Pyridine | (110-86-1) | |
Sodium bromide | (7647-15-6) | |
Sodium metal | (7440-23-5) | |
Tributylamine | (102-82-9) | |
Triethylamine | (121-44-8) | |
Trimethylamine | (75-50-3) | |
Diethylenetriamine | (111-40-0) | |
Butyrylcholinesterase (BCHE) | Not Applicable | Yes |
Pyridostigmine bromide | (101-26-8) | |
Obidoxime chloride | (114-90-9) | |
Acetylene | (CAS 74-86-2) | |
Acetone | (CAS 67-64-1) | |
Antimony | (CAS 7440-36-0) | |
Arsenic | (CAS 7440-38-2) | |
Arsenic trioxide | (CAS 1327-53-3) | |
Bis(2-chloroethyl)ethylamine hydrochloride | (CAS 3590-07-6) | |
Bis(2-chloroethyl)methylamine hydrochloride | (CAS 55-86-7) | |
Benzil | (CAS 134-81-6) | |
Benzaldehyde | (CAS 100-52-7) | |
Benzoin | (CAS 119-53-9) | |
2-bromochloroethane | (CAS 107-04-0) | |
Chlorine | (CAS 7782-50-5) | |
Diethyl ether | (CAS 60-29-7) | |
Dimethyl ether | (CAS 115-10-6) | |
Dimethylaminoethanol | (CAS 108-01-0) | |
Dicyclohexylamine (DCA) | (CAS 101-83-7) | |
Ethylene | (CAS 74-85-1) | |
Ethylene dichloride | (CAS 107-06-2) | |
2-methoxyethanol | (CAS 109-86-4) | |
Ethyl bromide | (CAS 74-96-4) | |
Ethyl chloride | (CAS 75-00-3) | |
Ethylamine | (CAS 75-04-7) | |
Ethylene oxide | (CAS 75-21-8) | |
Fluorapatite | (CAS 1306-05-4) | |
Hexamine | (CAS 100-97-0) | Yes |
Hydrogen sulfide | (CAS 7783-06-4) | |
Isocyanatomethane | (CAS 624-83-9) | |
Isopropanol, 95% concentration or greater | (CAS 67-63-0) | |
Mandelic acid | (CAS 90-64-2) | |
Methylamine | (CAS 74-89-5) | |
Methyl bromide | (CAS 74-83-9) | |
Methyl chloride | (CAS 74-87-3) | |
Methyl iodide | (CAS 74-88-4) | |
Methylmercaptan | (CAS 74-93-1) | |
Monoethylene Glycol (MEG) | (CAS 107-21-1) | |
Nitromethane | (CAS 75-52-5) | |
Oxalyl chloride | (CAS 79-37-8) | |
Picric acid | (CAS 88-89-1) | |
Potassium sulfide | (CAS 1312-73-8) | |
Potassium thiocyanate | (CAS 333-20-0) | |
Quinaldine | (CAS 91-63-4) | |
Thiophosphoryl chloride | (CAS 3982-91-0) | |
Tributylphosphite | (CAS 102-85-2) | |
Triisobutylphosphite | (CAS 1606-96-8) | |
Tris(2-chloroethyl)amine hydrochloride | (CAS 817-09-4) | |
Sodium hypochlorite | (CAS 7681-52-9) | |
Sulfur trioxide | (CAS 7446-11-9) | |
White/yellow phosphorus | (CAS 12185-10-3, 7723-14-0) | |
Mercury | (7439‐97‐6) | |
Barium chloride | (10361‐37‐2) | |
Sulphuric acid, with a concentration by weight of 90% or greater | (7664‐93‐9) | |
3,3‐dimethyl‐1‐butene | (558‐37‐2) | |
2,2‐dimethylpropanal | (630‐19‐3) | |
2,2‐dimethylpropylchloride | (753‐89‐9) | |
2‐methylbutene | (26760‐64‐5) | |
2‐chloro‐3‐methylbutane | (631‐65‐2) | |
2,3‐dimethyl‐2,3‐butanediol | (76‐09‐5) | |
2‐methyl‐2‐butene | (513‐35‐9) | |
Butyl lithium | (109‐72‐8) | |
Bromo(methyl)magnesium | (75‐16‐1) | |
Formaldehyde | (50‐00‐0) | |
Diethanolamine | (111‐42‐2) | |
Dimethylcarbonate | (616‐38‐6) | |
Methyldiethanolamine hydrochloride | (54060‐15‐0) | |
Methanol | (67‐56‐1) | |
Ethanol | (64‐17‐5) | Yes |
1‐butanol | (71‐36‐3) | |
2‐butanol | (78‐92‐2) | |
Iso‐butanol | (78‐83‐1) | |
Tert‐butanol | (75‐65‐0) | |
Cyclohexanol | (108‐93‐0) | |
Diethylamine hydrochloride | (660‐68‐4) | |
Diisopropylamine hydrochloride | (819‐79‐4) | |
3‐Quinuclidinone hydrochloride | (1193‐65‐3) | |
3‐Quinuclidinol hydrochloride | (6238‐13‐7) | |
(R)‐3‐ Quinuclidinol hydrochloride | (42437‐96‐7) | |
N,N‐Diethylaminoethanol hydrochloride | (14426‐20‐1) | |
Acetyl-alpha-methylfentanyl | 101860-00-8 | |
Alfentanil | 71195-58-9 | |
Alpha-methylfentanyl | 79704-88-4 | |
Alpha-methylthiofentanyl | 103963-66-2 | |
Beta-hydroxyfentanyl | 78995-10-5 | |
Beta-hydroxy-3-methylfentanyl | 78995-14-9 | |
Fentanyl | 437-38-7 | |
3-methylfentanyl | 42045-86-3 | |
3-methylthiofentanyl | 86052-04-2 | |
Para-fluorofentanyl | 90736-23-5 | |
Remifentanil | 132875-61-7 | |
Sufentanil | 56030-54-7 | |
Thiofentanyl | 60771-38-2 | |
Acryloylfentanyl (Acrylfentanyl) | 82003-75-6 | |
Carfentanil | 59708-52-0 | |
4-Fluoroisobutyrfentanyl (4-FIBF, pFIBF) | 244195-32-2 | |
Furanyl fentanyl | 101345-66-8 | |
Ocfentanil | 101343-69-5 | |
Tetrahydrofuranyl fentanyl (THF-F) | 2142571-01-3 | |
Cyclopropylfentanyl | 1169-68-2 | |
Methoxyacetylfentanyl | 101345-67-9 | |
Orthofluorofentanyl | 910616-29-4 | |
Parafluorobutyrylfentanyl | 244195-31-1 | |
Crotonylfentanyl | 760930-59-4 | |
Valerylfentanyl | 122882-90-0 | |
4-Anilino-N-phenethylpiperidine (ANPP) | 21409-26-7 | |
N-Phenethyl-4-piperidone (NPP) | 39742-60-4 | |
Dialkyl(≤C10) chlorophosphates | N/A | |
Dialkyl(≤C10) fluorophosphates | N/A | |
N,N-Methylisopropylacetamidine | 1339185-57-7 | |
N,N-Methylethylacetamidine | 1339632-40-4 | |
N,N-Ethylisopropylacetamidine | 1339156-10-3 | |
N,N-Methylpropylacetamidine | 1344238-28-3 | |
N,N-Ethylpropylacetamidine | 1339737-43-7 | |
N,N-Isopropylpropylacetamidine | 1341389-98-7 | |
N,N-Methylethylpropanamidine | 1339424-26-8 | |
N,N-Ethylisopropylpropanamidine | 1344354-09-1 | |
N,N-Methylpropylpropanamidine | 1340216-25-2 | |
N,N-Ethylpropylpropanamidine | 1341493-60-4 | |
N,N-Isopropylpropylpropanamidine | 1343225-93-3 | |
N,N-Methylisopropylpropanamidine | 1339042-55-5 | |
N,N-Methylethylbutanamidine | 1341049-51-1 | |
N,N-Methylpropylbutanamidine | 1343721-02-7 | |
N,N-Ethylpropylbutanamidine | 1343806-12-1 | |
N,N-Isopropylpropylbutanamidine | 1343316-02-8 | |
N,N-Methylisopropylbutanamidine | 1340219-94-4 | |
N,N-Ethylisopropylbutanamidine | 1342204-10-7 | |
N,N-Methylethylisobutanamidine | 1342365-47-2 | |
N,N-Ethylpropylisobutanamidine | 1342566-58-8 | |
N,N-Methylpropylisobutanamidine | 1342270-21-6 | |
N,N-Isopropylpropylisobutanamidine | 1342156-11-9 | |
N,N-Methylisopropylisobutanamidine | 1341992-96-8 | |
N,N-Ethylisopropylisobutanamidine | 1339048-76-8 | |
N,N-Dimethylacetamidine hydrobromide | 1801188-12-4 | |
N,N-Dimethylacetamidine hydrochloride | 2909-15-1 | |
N,N-Diethylacetamidine hydrochloride | 91400-32-7 | |
N,N-Diethylacetamidine hydrobromide | 78053-54-0 | |
N,N-Dimethylpropanamidine dihydrochloride | 79972-73-9 | |
N,N-Dimethylpropanamidine hydrochloride | 56776-15-9 | |
[F34Calcium carbide | 75-20-7 | |
Carbon monoxide | 630-08-0 | |
Monoethyleneglycol | 107-21-1 | |
Sulphur | 7704-34-9 | |
Sulphur dioxide | 7446-09-5] |
Textual Amendments
F34Words in Sch. 3C Pt. 4 Table inserted (16.12.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 17) Regulations 2022 (S.I. 2022/1331), regs. 1(2)(b), 20(2)
Item | Regulation 53A applies? |
---|---|
Floor-mounted fume hoods (walk-in style) with a minimum nominal width of 2.5 metres. | |
Full face-mask air-purifying and air-supplying respirators. | Yes |
Class II biosafety cabinets and glove boxes. | |
Batch centrifuges with a rotor capacity of 4 L or greater, usable with biological materials. | |
Fermenters with an internal volume of 10 L – 20 L, usable with biological materials. | Yes |
Reaction vessels, reactors, agitators, heat exchangers, condensers, pumps (including single seal pumps), valves, storage tanks, containers, receivers, and distillation or absorption columns that meet AG performance parameters, regardless of their materials of construction. | Yes |
Conventional or turbulent air-flow clean-air rooms and self-contained fan-HEPA filter units that may be used for P3 or P4 (BSL 3, BSL 4, L3, L4) containment facilities. | |
Vacuum pumps with a manufacturer’s specified maximum flow-rate greater than 1 m3/h (under standard temperature and pressure conditions), casings (pump bodies), preformed casing-liners, impellers, rotors, and jet pump nozzles designed for such pumps, in which all surfaces that come into direct contact with the chemicals being processed are made from controlled materials. | |
Laboratory equipment, including parts and accessories for such equipment, for the analysis or detection, destructive or non-destructive, of chemical substances. | |
Whole chlor-alkali electrolysis cells – mercury, diaphragm, and membrane. | |
Titanium electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells. | |
Nickel electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells. | |
Bipolar titanium nickel electrodes (including those with coatings produced from other metal oxides), specially designed for use in chlor-alkali cells. | |
Asbestos diaphragms specially designed for use in chlor-alkali cells. | |
Fluoropolymer based diaphragms specially designed for use in chlor-alkali cells. | |
Fluoropolymer based ion exchange membranes specially designed for use in chlor-alkali cells. | |
Compressors specially designed to compress wet or dry chlorine, regardless of material of construction. | |
Microwave reactors— Machinery, plant or laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature such as heating 84 19 89 98 00. | Yes |
Microreactors— Instruments and apparatus for physical or chemical analysis: 90 27 89 90 00 BE (classified similar item to 90 27 80 17 90, now invalid due to code changes), for similar microreactors. | |
Solid & Liquid Aerosol generating equipment— Mechanical appliances (whether or not hand-operated), for projecting, dispersing or spraying liquids or powders: 84 24 89 70 00. |
Item | Regulation 53A applies? |
---|---|
Next-generation (second generation) and third generation DNA and RNA sequencers | |
PCR Machines and qPCR (real-time) PCR machines | Yes |
Solid phase DNA and RNA synthesisers | |
Peptide synthesizers | |
Automated nucleic acid extraction systems | |
Ultracentrifuges | |
Probe sonicators | |
Fast protein liquid chromatography (FPLC) systems (medium pressure chromatography systems) | |
Cell disruptors and tissue homogenisers, with a volume of 1 L or greater |
Item | Regulation 53A applies? | |
---|---|---|
Next generation (second generation) and third generation DNA and RNA sequencers | DNA and RNA sequencing reagent kits | Yes |
Library and template preparation kits | ||
Cluster generation kits | Yes | |
Flow cells | Yes | |
PCR Machines and qPCR (real-time) PCR machines | Yes | |
Solid phase DNA and RNA synthesisers | Nucleoside phosphoramidites | |
Columns | ||
Solid support resin | Yes | |
Reagent kits | Yes | |
Synthesis reagents | Yes | |
Peptide synthesizers | Fmoc and T-Boc protected amino acids | |
Resins | Yes | |
Synthesis reagents | Yes | |
Automated nucleic acid extraction systems | Reagents | Yes |
Rotor adapters | ||
Ultracentrifuges | Ultracentrifuge rotors with total capacity 1 L or greater | |
Probe sonicators | Sonicator probes over 25mm diameter | |
High volume (1 L or greater) sonicator continuous flow cell | ||
Fast protein liquid chromatography (FPLC) systems (medium pressure chromatography systems) | FPLC columns | |
Reagents | Yes | |
Cell disruptors and tissue homogenisers |
Item | Regulation 53A applies? |
---|---|
0B999 Specific processing equipment as follows: | |
a. Ring magnets. | Yes |
b. Hot cells. | |
c. Glove boxes suitable for use with radioactive materials. | |
0D999 Specific software, as follows: | |
a. Software for neutronic calculations/modelling; | |
b. Software for radiation transport calculations/modelling; | |
c. Software for hydrodynamic calculations/modelling. | Yes |
1A995 Protective and detection equipment as follows and specially designed components therefor. | |
a. Personal radiation monitoring dosimeters; | |
b. Equipment limited by design or function to protect against hazards specific to civil industries, such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or to the food industry. Note: This entry does not control items for protection against chemical or biological agents that are consumer goods, packaged for retail sale or personal use, or medical products, such as latex exam gloves, latex surgical gloves, liquid disinfectant soap, disposable surgical drapes, surgical gowns, surgical foot covers, and surgical masks. | |
1A999 Specific processing equipment as follows: | |
Radiation detection, monitoring and measurement equipment | |
Radiographic detection equipment such as x-ray converters, and storage phosphor image plates. | Yes |
1C991 Vaccines, immunotoxins, medical products, diagnostic and food testing kits, as follows. | |
Technical note:- For the purpose of this entry, ‘immunotoxins’ are monoclonal antibodies linked to a toxin with the intention of destroying a specific target cell while leaving adjacent cells intact. For the purpose of this entry, “medical products” are: (1) pharmaceutical formulations designed for testing and human (or veterinary) administration in the treatment of medical conditions, (2) prepackaged for distribution as clinical or medical products. For the purpose of this entry, “diagnostic and food testing kits” are specifically developed, packaged and marketed for diagnostic or public health purposes. For the purpose of this entry, “vaccine” is defined as a medicinal (or veterinary) product in a pharmaceutical formulation that is intended to stimulate a protective immunological response in humans or animals in order to prevent disease in those to whom or to which it is administered. | |
Technical Note: For purposes of the controls described in this entry ‘toxins’ refers to those toxins, or their subunits, controlled under 1C351.d of Annex I of the Dual-Use Regulation | |
a. Vaccines containing, or designed for use against, items controlled by 1C351, 1C353 or 1C354 of Annex I of the Dual-Use Regulation; | Yes |
b. Immunotoxins containing items controlled by 1C351.d of Annex I of the Dual-Use Regulation; | Yes |
c. Medical products that contain any of the following: | Yes |
c.1. Toxins controlled by 1C351.d of Annex I of the Dual-Use Regulation (except for botulinum toxins controlled by 1C351.d.3 of Annex I of the Dual-Use Regulation, conotoxins controlled by 1C351.d.6, of Annex I of the Dual-Use Regulation or items controlled for CW reasons under 1C351.d.11 or .d.12 of Annex I of the Dual-Use Regulation); or | Yes |
c.2. Genetically modified organisms or genetic elements controlled by 1C353.a.3 of Annex I of the Dual-Use Regulation (except for those that contain, or code for, botulinum toxins controlled by C351.d.3 of Annex I of the Dual-Use Regulation or conotoxins controlled by 1C351.d.6 of Annex I of the Dual-Use Regulation); | Yes |
d. Medical products not controlled by 1C991.c that contain any of the following: | Yes |
d.1. Botulinum toxins controlled by 1C351.d.3 of Annex I of the Dual-Use Regulation; | Yes |
d.2. Conotoxins controlled by 1C351.d.6 of Annex I of the Dual-Use Regulation; or | Yes |
d.3. Genetically modified organisms or genetic elements controlled by 1C353.a.3 of Annex I of the Dual-Use Regulation that contain, or code for, botulinum toxins controlled by 1C351.d.3 of Annex I of the Dual-Use Regulation or conotoxins controlled by 1C351.d.6 of Annex I of the Dual-Use Regulation; | Yes |
e. Diagnostic and food testing kits containing items controlled by 1C351.d of Annex I of the Dual-Use Regulation. | Yes |
1C995 Mixtures that contain chemicals controlled by 1C350 or 1C450 of Annex 1 of the Dual-Use Regulation and medical, analytical, diagnostic, and food testing kits that contain chemicals controlled by 1C350, as follows:
For the purpose of this entry, “medical, analytical, diagnostic, and food testing kits” are pre-packaged materials of defined composition that are specifically developed, packaged and marketed for medical, analytical, diagnostic, or public health purposes.
a. Mixtures containing the following concentrations of precursor chemicals controlled by 1C350 of Annex I of the Dual-Use Regulation:
a.1. Mixtures containing 10 per cent. or less, by weight, of any of the following—
Chemical Name | CAS Number | Regulation 53A applies? |
---|---|---|
Arsenic trichloride; | 7784-34-1 | |
Benzilic acid; | 76-93-7 | |
Diethyl ethylphosphonate; | 78-38-6 | |
Diethyl methylphosphonate; | 683-08-9 | |
Diethyl methylphosphonite | 15715-41-0 | |
Diethyl-N,N-dimethylphosphoroamidate; | 2404-03-7 | |
N,N-Diisopropylaminoethanethiol hydrochloride; | 41480-75-5 | |
N,N-Diisopropyl-beta-aminoethane thiol; | 5842-07-9 | |
N,N-Diisopropyl-beta-aminoethanol; | 96-80-0 | |
N,N-Diisopropyl-beta-aminoethyl chloride; | 96-79-7 | |
N,N-Diisopropyl-beta-aminoethyl chloride hydrochloride; | 4261-68-1 | |
Dimethyl ethylphosphonate; | 6163-75-3 | |
Dimethyl methylphosphonate; | 756-79-6 | |
N,N-dimethylamino-phosphoryl dichloride; | 677-43-0 | |
Ethyl phosphonous dichloride [Ethyl phosphinyl dichloride]; | 1498-40-4 | |
Ethyl phosphonus difluoride [Ethyl phosphinyl difluoride]; | 430-78-4 | |
Ethyl phosphonyl dichloride; | 1066-50-8 | |
Methylphosphonic acid; | 993-13-5 | |
Methylphosphonothioic dichloride. | 676-98-2 | |
Pinacolyl alcohol; | 464-07-3 | |
3-Quinuclidinol; | 1619-34-7 | |
Thiodiglycol. | 111-48-8 |
a.2. Mixtures containing less than 30 per cent., by weight, of:
a.2.a. Any of the following—
Chemical Name | CAS Number | Regulation 53A applies? |
---|---|---|
Diethyl phosphite; | 762-04-9 | |
Dimethyl phosphite (dimethyl hydrogen phosphite); | 868-85-9 | |
Ethyldiethanolamine; | 139-87-7 | |
Phosphorus oxychloride; | 10025-87-3 | |
Phosphorus pentachloride; | 10026-13-8 | |
Phosphorus trichloride; | 7719-12-2 | |
Sulfur dichloride; | 10545-99-0 | |
Sulfur monochloride; | 10025-67-9 | |
Thionyl chloride; | 7719-09-7 | |
Triethanolamine; | 102-71-6 | |
Triethyl phosphite; | 122-52-1 | |
Trimethyl phosphite. | 121-45-9 |
or
a.2.b. Any of the following single precursor chemicals—
Chemical Name | CAS Number | Regulation 53A applies? |
---|---|---|
Ammonium hydrogen fluoride; | 1341-49-7 | |
2-Chloroethanol; | 107-07-3 | |
Diethylamine; | 109-89-7 | |
N,N-Diethylaminoethanol; | 100-37-8 | |
Diethyl chlorophosphite; | 589-57-1 | |
O,O-Diethyl phosphorodithioate; | 298-06-6 | |
O,O-Diethyl phosphorothioate; | 2465-65-8 | |
Di-isopropylamine; | 108-18-9 | |
Dimethylamine; | 124-40-3 | |
Dimethylamine hydrochloride; | 506-59-2 | |
Ethyl chlorofluorophosphate; | 762-77-6 | |
Ethyl dichlorophosphate; | 1498-51-7 | |
Ethyl difluorophosphate; | 460-52-6 | |
Hydrogen fluoride; | 7664-39-3 | |
3-Hydroxyl-1-methylpiperidine; | 3554-74-3 | |
Methyl benzilate; | 76-89-1 | |
Methyl chlorofluorophosphate; | 754-01-8 | |
Methyl dichlorophosphate; | 677-24-7 | |
Methyl difluorophosphate; | 22382-13-4 | |
N,N Diethylacetamidine; | 14277-06-6 | |
N,N-Diethylbutanamidine; | 53510-30-8 | |
N,N-Diethylformamidine; | 90324-67-7 | |
N,N Diethylisobutanamidine; | 1342789-47-2 | |
N,N-Diethylpropanamidine; | 84764-73-8 | |
N,N-Diisopropylbutanamidine; | 1315467-17-4 | |
N,N-Diisopropylformamidine; | 857522-08-8 | |
N,N-Dimethylacetamidine; | 2909-14-0 | |
N,N-Dimethylbutanamidine; | 1340437-35-5 | |
N,N-Dimethylformamidine; | 44205-42-7 | |
N,N-Dimethylisobutanamidine; | 321881-25-8 | |
N,N-Dimethylpropanamidine; | 56776-14-8 | |
N,N-Dipropylacetamidine; | 1339586-99-0 | |
N,N-Dipropylbutanamidine; | 1342422-35-8 | |
N,N-Dipropylformamidine; | 48044-20-8 | |
N,N-Dipropylisobutanamidine; | 1342700-45-1 | |
N,N-Dipropylpropanamidine; | 1341496-89-6 | |
Phosphorus pentasulfide; | 1314-80-3 | |
Pinacolone; | 75-97-8 | |
Potassium bifluoride; | 7789-29-9 | |
Potassium cyanide; | 151-50-8 | |
Potassium fluoride; | 7789-23-3 | |
3-Quinuclidone; | 3731-38-2 | |
Sodium bifluoride; | 1333-83-1 | |
Sodium cyanide; | 143-33-9 | |
Sodium fluoride; | 7681-49-4 | |
Sodium hexafluorosilicate; | 16893-85-9 | |
Sodium sulfide; | 1313-82-2 | |
Triethanolamine hydrochloride; | 637-39-8 | |
Tri-isopropyl phosphite. | 116-17-6 |
b. Mixtures containing the following concentrations of toxic or precursor chemicals controlled by 1C450 of Annex I of the Dual-Use Regulation—
b.1. Mixtures containing the following concentrations of CWC Schedule 2 chemicals controlled by 1C450.a.2, 1C450.b1, 1C450.b2, 1C450.b.3, 1C450.b.4, 1C450.b.5 or 1C450.b.6 of Annex I of the Dual-Use Regulation;
b.1.a. Mixtures containing 1 per cent. or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.a.2 of Annex I of the Dual-Use Regulation (i.e., mixtures containing PFIB); or
b.1.b. Mixtures containing 10 per cent. or less, by weight, of any single CWC Schedule 2 chemical controlled by 1C450.b1, 1C450.b2, 1C450.b.3, 1C450.b.4, 1C450.b.5 or 1C450.b.6 of Annex I of the Dual-Use Regulation.
b.2. Mixtures containing less than 30 per cent., by weight, of any single CWC Schedule 3 chemical controlled by 1C450.a.4, 1C450.a.5, 1C450.a.6, 1C450.a.7, 1C450.b.8, of Annex I of the Dual-Use Regulation.
c. “Medical, analytical, diagnostic, and food testing kits” that contain precursor chemicals controlled by the following in an amount not exceeding 300 grams per chemical.
Chemical Name | CAS Number | Regulation 53A applies? |
---|---|---|
Ammonium hydrogen fluoride; | 1341-49-7 | Yes to all items in column 1 of this table |
2-Chloroethanol; | 107-07-3 | |
Diethylamine; | 109-89-7 | |
N,N-Diethylaminoethanol; | 100-37-8 | |
Diethyl chlorophosphite; | 589-57-1 | |
O,O-Diethyl phosphorodithioate; | 298-06-6 | |
O,O-Diethyl phosphorothioate; | 2465-65-8 | |
Di-isopropylamine; | 108-18-9 | |
Dimethylamine; | 124-40-3 | |
Dimethylamine hydrochloride; | 506-59-2 | |
Ethyl chlorofluorophosphate; | 762-77-6 | |
Ethyl dichlorophosphate; | 1498-51-7 | |
Ethyl difluorophosphate; | 460-52-6 | |
Hydrogen fluoride; | 7664-39-3 | |
3-Hydroxyl-1-methylpiperidine; | 3554-74-3 | |
Methyl benzilate; | 76-89-1 | |
Methyl chlorofluorophosphate; | 754-01-8 | |
Methyl dichlorophosphate; | 677-24-7 | |
Methyl difluorophosphate; | 22382-13-4 | |
N,N Diethylacetamidine; | 14277-06-6 | |
N,N-Diethylbutanamidine; | 53510-30-8 | |
N,N-Diethylformamidine; | 90324-67-7 | |
N,N Diethylisobutanamidine; | 1342789-47-2 | |
N,N-Diethylpropanamidine; | 84764-73-8 | |
N,N-Diisopropylbutanamidine; | 1315467-17-4 | |
N,N-Diisopropylformamidine; | 857522-08-8 | |
N,N-Dimethylacetamidine; | 2909-14-0 | |
N,N-Dimethylbutanamidine; | 1340437-35-5 | |
N,N-Dimethylformamidine; | 44205-42-7 | |
N,N-Dimethylisobutanamidine; | 321881-25-8 | |
N,N-Dimethylpropanamidine; | 56776-14-8 | |
N,N-Dipropylacetamidine; | 1339586-99-0 | |
N,N-Dipropylbutanamidine; | 1342422-35-8 | |
N,N-Dipropylformamidine; | 48044-20-8 | |
N,N-Dipropylisobutanamidine; | 1342700-45-1 | |
N,N-Dipropylpropanamidine; | 1341496-89-6 | |
Phosphorus pentasulfide; | 1314-80-3 | |
Pinacolone; | 75-97-8 | |
Potassium bifluoride; | 7789-29-9 | |
Potassium cyanide; | 151-50-8 | |
Potassium fluoride; | 7789-23-3 | |
3-Quinuclidone; | 3731-38-2 | |
Sodium bifluoride; | 1333-83-1 | |
Sodium cyanide; | 143-33-9 | |
Sodium fluoride; | 7681-49-4 | |
Sodium hexafluorosilicate; | 16893-85-9 | |
Sodium sulfide; | 1313-82-2 | |
Triethanolamine hydrochloride; | 637-39-8 | |
Tri-isopropyl phosphite. | 116-17-6] |
Regulation 46S
Textual Amendments
1. Paragraph 1 of Schedule 3 applies for the purpose of interpreting this Schedule.U.K.
[F361A. In this Schedule, “n.e.s” means “not elsewhere specified”.]U.K.
Textual Amendments
2. A revenue generating good is any thing falling within a commodity code mentioned in column 1 of the following table.U.K.
Commodity code (1) | Item (2) |
---|---|
0306 | Crustaceans, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked crustaceans, whether in shell or not, whether or not cooked before or during the smoking process; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine |
1604 31 00 | Caviar |
1604 32 00 | Caviar substitutes |
[F372208 | Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol; spirits, liqueurs and other spirituous beverages] |
[F372303 | Residues of starch manufacture and similar residues, beet-pulp, bagasse and other waste of sugar manufacture, brewing or distilling dregs and waste, whether or not in the form of pellets] |
2523 | Portland cement, aluminous cement, slag cement, supersulphate cement and similar hydraulic cements, whether or not coloured or in the form of clinkers |
28251000 | Hydrazine and hydroxylamine and their inorganic salts |
28254000 | Nickel oxides and hydroxides |
28255000 | Copper oxides and hydroxides |
28256000 | Germanium oxides and zirconium dioxide |
28257000 | Molybdenum oxides and hydroxides |
28258000 | Antimony oxides |
28259011 | Calcium hydroxide of a purity of >= 98% calculated on the dry weight, in the form of particles of which not > 1% by weight have a particle-size > 75 micrometres and not > 4% by weight have a particle-size of < 1,3 micrometres |
28259019 | Calcium oxide, hydroxide and peroxide (excl. calcium hydroxide of a purity of >= 98% calculated on the dry weight, in the form of particles of which not > 1% by weight have a particle-size > 75 micrometres and not > 4% by weight have a particle-size of < 1,3 micrometres) |
28259020 | Beryllium oxide and hydroxide |
28259040 | Tungsten oxides and hydroxides |
28259060 | Cadmium oxide |
28259085 | Inorganic bases and metal oxides, hydroxides and peroxides, n.e.s. |
28351000 | Phosphinates “hypophosphites” and phosphonates “phosphites” |
28352200 | Mono- or disodium phosphate |
28352400 | Phosphates of potassium |
28352500 | Calcium hydrogenorthophosphate “dicalcium phosphate” |
28352910 | Phosphate of triammonium |
28352930 | Phosphate of trisodium |
28352990 | Phosphates (excl. phosphates of triammonium, monosodium, disodium, trisodium, of potassium, of calcium and of mercury) |
28353100 | Sodium triphosphate “sodium tripolyphosphate”, whether or not chemically defined |
28353900 | Polyphosphates, whether or not chemically defined (excl. sodium triphosphate “sodium tripolyphosphate”, and inorganic or organic compounds of mercury whether or not chemically defined) |
29012100 | Ethylene |
29012200 | Propene “propylene” |
29012300 | Butene “butylene” and isomers thereof |
29012400 | Buta-1,3-diene and isoprene |
29012900 | Hydrocarbons, acyclic, unsaturated (excl. ethylene, propene “propylene”, butene “butylene” and isomers thereof and Buta-1,3-diene and isoprene) |
2902 | Cyclic hydrocarbons |
29051200 | Propan-1-ol “propyl alcohol” and propan-2-ol “isopropyl alcohol” |
29051300 | Butan-1-ol “n-butyl alcohol” |
29051410 | 2-Methylpropan-2-ol “tert-butyl alcohol” |
29051490 | Butanols (excl. butan-1-ol “n-butyl alcohol” and 2-Methylpropan-2-ol “tert-butyl alcohol”) |
29051620 | Octan-2-ol |
29051685 | Octanol “octyl alcohol” and isomers thereof (excl. octan-2-ol) |
29051700 | Dodecan-1-ol “lauryl alcohol”, hexadecan-1-ol “cetyl alcohol” and octadecan-1-ol “stearyl alcohol” |
29051900 | Saturated monohydric acyclic alcohols (excl. methanol “methyl alcohol”, propan-1-ol “propyl alcohol”, propan-2-ol “isopropyl alcohol”, butanols, octanol “octyl alcohol” and isomers thereof, dodecan-1-ol “lauryl alcohol”, hexadecan-1-ol “cetyl alcohol” and octadecan-1-ol “stearyl alcohol”) |
29052200 | Acyclic terpene alcohols |
29052910 | Allyl alcohol |
29052990 | Unsaturated monohydric acyclic alcohols (excl. allyl alcohol and acyclic terpene alcohols) |
29053100 | Ethylene glycol “ethanediol” |
29053200 | Propylene glycol “propane-1,2-diol” |
29053920 | Butane-1,3-diol |
29053926 | Butane-1,4-diol or tetramethylene glycol [1,4-butanediol] having a bio-based carbon content of 100% by mass |
29053928 | Butane-1,4-diol (excl. having a bio-based carbon content of 100%) |
29053930 | 2,4,7,9-Tetramethyldec-5-yne-4,7-diol |
29053995 | Acyclic diols (excl. ethylene glycol “ethanediol”, propylene glycol “propane-1,2-diol”, butane-1,3-diol, butane-1,4-diol and 2,4,7,9-tetramethyldec-5-yne-4,7-diol) |
29054100 | 2-Ethyl-2-“hydroxymethyl” propane-1,3-diol “trimethylolpropane” |
29054200 | Pentaerythritol |
29054300 | Mannitol |
29054411 | D-glucitol “sorbitol”, in aqueous solution containing <= 2% by weight of d-mannitol, calculated on the d-glucitol content |
29054419 | D-glucitol “sorbitol” in aqueous solution (excl. containing <= 2% by weight of d-mannitol, calculated on the d-glucitol content) |
29054491 | D-glucitol “sorbitol”, containing <= 2% by weight of d-mannitol, calculated on the d-glucitol content (excl. in aqueous solution) |
29054499 | D-glucitol “sorbitol” (excl. in aqueous solution and containing <= 2% by weight of d-mannitol, calculated on the d-glucitol content) |
29054500 | Glycerol |
29054900 | Tri- and other polyhydric acyclic alcohols (excl. 2-ethyl-2-”hydroxymethyl” propane-1,3-diol “trimethylolpropane”, pentaerythritol, mannitol, d-glucitol “sorbitol” and glycerol) |
29055100 | Ethchlorvynol “INN” |
29055991 | 2,2-Bis “bromomethyl” propanediol |
29055998 | Halogenated, sulphonated, nitrated or nitrosated derivatives of acyclic alcohols (excl. 2,2-bis”bromomethyl”propanediol and ethchlorvynol “INN”) |
2907 | Phenols; phenol-alcohols |
2909 | Ethers, ether-alcohols, ether-phenols, ether-alcohol-phenols, alcohol peroxides, ether peroxides, acetal and hemiacetal peroxides, ketone peroxides (whether or not chemically defined), and their halogenated, sulphonated, nitrated or nitrosated derivatives |
3104 20 | Potassium chloride |
3105 20 | Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium |
3105 60 | Mineral or chemical fertilisers containing the two fertilising elements phosphorus and potassium |
3105 90 20 | Other fertilisers containing potassium chloride |
3105 90 80 | Other fertilisers containing potassium chloride |
3902 | Polymers of propylene or of other olefins, in primary forms |
4011 | New pneumatic tyres, of rubber |
44 | Wood and articles of wood; wood charcoal |
4705 | Wood pulp obtained by a combination of mechanical and chemical pulping processes |
4804 | Uncoated kraft paper and paperboard, in rolls or sheets, other than that of heading 4802 or 4803 |
6810 | Articles of cement, of concrete or of artificial stone, whether or not reinforced |
7005 | Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked |
7007 | Safety glass, consisting of toughened (tempered) or laminated glass |
7010 | Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass |
7019 | Glass fibres (including glass wool) and articles thereof (for example, yarn, rovings, woven fabrics) |
7106 | Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form |
7606 | Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm |
7801 | Unwrought lead |
84111100 | Turbojets of a thrust <= 25 kN |
84111210 | Turbojets of a thrust > 25 kN but <= 44 kN |
84111230 | Turbojets of a thrust > 44 kN but <= 132 kN |
84111280 | Turbojets of a thrust > 132 kN |
84112100 | Turbopropellers of a power <= 1.100 kW |
84112220 | Turbopropellers of a power > 1.100 kW but <= 3.730 kW |
84112280 | Turbopropellers of a power > 3.730 kW |
84118100 | Gas turbines of a power <= 5.000 kW (excluding turbojets and turbopropellers) |
84118220 | Gas turbines of a power > 5.000 kW but <= 20.000 kW (excluding turbojets and turbopropellers) |
84118260 | Gas turbines of a power > 20.000 kW but <= 50.000 kW (excluding turbojets and turbopropellers) |
84118280 | Gas turbines of a power > 50.000 kW (excluding turbojets and turbopropellers) |
84119900 | Parts of gas turbines, n.e.s. |
8431 | Parts suitable for use solely or principally with the machinery of headings 8425 to 8430 |
8901 | Cruise ships, excursion boats, ferry-boats, cargo ships, barges and similar vessels for the transport of persons or goods |
8904 | Tugs and pusher craft |
8905 | Light-vessels, fire-floats, dredgers, floating cranes, and other vessels the navigability of which is subsidiary to their main function; floating docks; floating or submersible drilling or production platforms |
9403 | Other furniture and parts thereof] |
Textual Amendments
F37Words in Sch. 3D para. 2 Table inserted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(7)(b)
Regulation 21
Textual Amendments
F38Schs. 3E-3H inserted (21.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 14) Regulations 2022 (S.I. 2022/850), regs. 1(2), 26
F39Sch. 3E heading substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), reg. 1(2)(b), Sch. 3 para. 10(1)(2)(i)
1. Paragraph 1 of Schedule 3 applies for the purposes of interpreting [F40Parts 2 and 3].
Textual Amendments
F40Words in Sch. 3E para. 1 substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(8)(b)
[F411A. In this Schedule, “n.e.s” means “not elsewhere specified”.]
Textual Amendments
Textual Amendments
F42Sch. 3E Pt. 2 heading substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), reg. 1(2)(b), Sch. 3 para. 10(1)(2)(i)
2. Any thing falling within a commodity code mentioned in column 1 of the following table.U.K.
(1) Commodity Code | (2) Name of the good |
---|---|
0601 10 | Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant |
0601 20 | Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, in growth or in flower; chicory plants and roots |
0602 30 | Rhododendrons and azaleas, grafted or not |
0602 40 | Roses, grafted or not |
0602 90 | Other live plants (including their roots), cuttings and slips; mushroom spawn - Other |
0604 20 | Foliage, branches and other parts of plants, without flowers or flower buds, and grasses, mosses and lichens, being goods of a kind suitable for bouquets or for ornamental purposes, fresh, dried, dyed, bleached, impregnated or otherwise prepared - Fresh |
2508 40 | Other clays |
2508 70 | Chamotte or dinas earths |
2509 00 | Chalk |
2512 00 | Siliceous fossil meals (for example, kieselguhr, tripolite and diatomite) and similar siliceous earths, whether or not calcined, of an apparent specific gravity of 1 or less |
2515 12 | Merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape |
2515 20 | Ecaussine and other calcareous monumental or building stone; alabaster |
2518 20 | Calcined or sintered dolomite |
2519 10 | Natural magnesium carbonate (magnesite) |
2520 10 | Gypsum; anhydrite |
2521 00 | Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement |
2522 10 | Quicklime |
2522 30 | Hydraulic lime |
2525 20 | Mica powder |
2526 20 | Natural steatite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape; talc - Crushed or powdered |
2530 20 | Kieserite, epsomite (natural magnesium sulphates) |
2707 30 | Xylol (xylenes) |
2708 20 | Pitch coke |
2712 10 | Petroleum jelly |
2712 90 | Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured: |
2715 00 | Bituminous mastics, cut-backs and other bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch - Other |
2804 10 | Hydrogen |
2804 30 | Nitrogen |
2804 40 | Oxygen |
2804 61 | Silicon - Containing by weight not less than 99,99 % of silicon |
2806 10 | Hydrogen chloride (hydrochloric acid) |
2806 20 | Chlorosulphuric acid |
2811 29 | Other inorganic oxygen compounds of non-metals - Other |
2813 10 | Carbon disulphide |
2814 20 | Ammonia in aqueous solution |
2815 12 | Sodium hydroxide (caustic soda) - In aqueous solution (soda lye or liquid soda) |
2818 30 | aluminium hydroxide |
2819 90 | Chromium oxides and hydroxides - Other |
2820 10 | Manganese dioxide |
2827 31 | Other chlorides - Of magnesium |
2827 35 | Other chlorides - Of nikel |
2829 11 | Chlorates - Of sodium |
2832 20 | Sulphites (excluding sodium sulphites) |
2833 24 | Sulphates of nickel |
2833 30 | Alums |
2836 30 | Sodium hydrogencarbonate (sodium bicarbonate) |
2836 50 | Calcium carbonate |
2839 90 | Silicates; commercial alkali metal silicates - Other |
2840 30 | Peroxoborates (perborates) |
2841 50 | Other chromates and dichromates; peroxochromates |
2841 80 | Tungstates (wolframates) |
2843 10 | Colloidal precious metals |
2843 21 | Silver nitrate |
2843 29 | Silver compounds - Other |
2843 30 | Gold compounds |
2847 00 | Hydrogen peroxide, whether or not solidified with urea |
2901 23 | Butene (butylene) and isomers thereof |
2901 24 | Buta-1,3-diene and isoprene |
2902 11 | Cyclohexane |
2902 30 | Toluene |
2902 41 | o-xylene |
2902 43 | p-xyle |
2902 44 | Mixed xylene isomers |
2902 50 | Styrene |
2903 21 | Vinyl chloride (chloroethylene) |
2903 23 | Tetrachloroethylene (perchloroethylene) |
2903 29 | Unsaturated chlorinated derivatives of acyclic hydrocarbons - Other |
2903 76 | Bromochlorodifluoromethane (Halon-1211), bromotrifluoromethane (Halon-1301) and dibromotetrafluoroethanes (Halon-2402) |
2903 81 | 1,2,3,4,5,6-Hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN) |
2903 91 | Chlorobenzene, o-dichlorobenzene and p-dichlorobenzene |
2904 10 | Derivatives containing only sulpho groups, their salts and ethyl esters |
2904 31 | Perfluorooctane sulphonic acid |
2905 16 | Octanol (octyl alcohol) and isomers thereof |
2905 19 | Saturated monohydric alcohols - Other |
2905 41 | 2-Ethyl-2-(hydroxymethyl)propane-1,3-diol (trimethylolpropane) |
2905 49 | Other polyhydric alcohols - Other |
2906 13 | Sterols and inositols |
2906 19 | Cyclanic, cyclenic or cycloterpenic -Other |
2907 11 | Phenol (hydroxybenzene) and its salts |
2907 13 | Octylphenol, nonylphenol and their isomers; salts thereof |
2907 19 | Monophenols - Other |
2907 22 | Hydroquinone (quinol) and its salts |
2909 20 | Cyclanic, cyclenic or cycloterpenic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives |
2909 41 | 2,2′-Oxydiethanol (diethylene glycol, digol) |
2909 43 | Monobutyl ethers of ethylene glycol or of diethylene glycol |
2909 49 | Ether-alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives - Other |
2910 20 | Methyloxirane (propylene oxide) |
2911 00 | Acetals and hemiacetals, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivat |
2912 12 | Ethanal (acetaldehyde) |
2912 49 | Aldehyde-alcohols, aldehyde-ethers, aldehyde-phenols and aldehydes with other oxygen function - Other |
2912 60 | Paraformaldehyde |
2914 61 | Anthraquinone |
2915 13 | Esters of formic acid |
2915 90 | Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives - Other |
2916 12 | Esters of acrylic acid |
2916 13 | Methacrylic acid and its salts |
2916 14 | Esters of methacrylic acid |
2916 15 | Oleic, linoleic or linolenic acids, their salts and esters |
2917 33 | Dinonyl or didecyl orthophthalates |
2920 11 | Parathion (ISO) and parathion-methyl (ISO) (methyl-parathion) |
2921 22 | Hexamethylenediamine and its salts |
2921 41 | Aniline and its salts |
2922 11 | Monoethanolamine and its salts |
2922 43 | Anthranilic acid and its salts |
2923 20 | Lecithins and other phosphoaminolipids |
2930 40 | Methionine |
2933 54 | Other derivatives of malonylurea (barbituric acid); salts thereof |
2933 71 | 6-Hexanelactam (epsilon-caprolactam) |
3201 90 | Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives |
3202 10 | Synthetic organic tanning substances |
3202 90 | Synthetic organic tanning substances; inorganic tanning substances; tanning preparations, whether or not containing natural tanning substances; enzymatic preparations for pre-tanning |
3203 00 | colouring matter of vegetable or animal origin, incl. dye extracts (excl. animal black), whether or not chemically defined; preparations based on colouring matter of vegetable or animal origin of a kind used to dye fabrics or produce colorant preparations (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 ) - Other |
3206 49 | inorganic or mineral colouring matter, n.e.s.; preparations based on inorganic or mineral colouring matter of a kind used for colouring any material or produce colorant preparations, n.e.s. (excl. preparations of heading 3207 , 3208 , 3209 , 3210 , 3213 and 3215 and inorganic products of a kind used as liminophores) - Other |
3207 2010 | Engobes (slips) |
3207 40 | Glass frit and other glass, in the form of powder, granules or flakes |
3208 10 | Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - Based on polyesters |
3208 20 | Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - Based on acrylic or vinyl polymers |
3208 90 | Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note 4 to Chapter 32 - |
3209 10 | paints and varnishes, incl. enamels and lacquers, based on acrylic or vinyl polymers, dispersed or dissolved in an aqueous medium |
3209 90 | paints and varnishes, incl. enamels and lacquers, based on synthetic or chemically modified natural polymers, dispersed or dissolved in an aqueous medium (excl. those based on acrylic or vinyl polymers) - Other |
3210 00 | Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather |
3212 90 | Pigments (including metallic powders and flakes) dispersed in non- aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other colouring matter put up in forms or packings for retail sale - Other |
3214 10 | Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics; painters’ fillings |
3214 90 | Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics; painters’ fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like - Other |
3403 11 | Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Preparations for the treatment of textile materials, leather, furskins or other materials |
3403 19 | Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals – Containing petroleum oils or oils obtained from bituminous minerals - Other |
3403 91 | Preparations for the treatment of textile materials, leather, furskins or other materials |
3403 99 | Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals - Other |
3505 10 | Dextrins and other modified starches |
3506 99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg- Other |
3701 20 | Instant print film |
3701 91 | For colour photography (polychrome) |
3702 32 | Other film, with silver halide emulsion |
3702 39 | Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed - Other |
3702 43 | Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 610 mm and of a length not exceeding 200 m |
3702 44 | Other film, without perforations, of a width exceeding 105 mm - Of a width exceeding 105 mm but not exceeding 610 mm |
3702 55 | Other film, for colour photography (polychrome) - Of a width exceeding 16 mm but not exceeding 35 mm and of a length exceeding 30 m |
3702 56 | Other film, for colour photography (polychrome) - Of a width exceeding 35 mm |
3702 97 | Other film, for colour photography (polychrome) - Of a width not exceeding 35 mm and of a length exceeding 30 m. |
3702 98 | photographic film, sensitised, in rolls, unexposed, with perforations, for monochrome photography, width > 35 mm (excl. of paper, paperboard and textiles; x-ray film) |
3703 20 | photographic paper, paperboard and textiles, sensitised, unexposed, for colour photography ‘polychrome’ (excl. products in rolls > 610 mm wide) |
3703 90 | photographic paper, paperboard and textiles, sensitised, unexposed, for monochrome photography (excl. products in rolls > 610 mm wide) |
3705 00 | photographic plates and film, exposed and developed (excl. products made of paper, paperboard or textiles, cinematographic film and ready-to-use printing plates) |
3706 10 | cinematographic film, exposed and developed, whether or not incorporating soundtrack or consisting only of soundtrack, width >= 35 mm |
3801 20 | colloidal or semi-colloidal graphite |
3806 20 | salts of rosin, of resin acids or of derivatives of rosin or resin acids (excl. salts of rosin adducts) |
3807 00 | wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewer’s pitch and similar preparations based on rosin, resin acids or vegetable pitch (excl. burgundy pitch, yellow pitch, stearin pitch, fatty acid pitch, fatty tar and glycerin pitch) |
3809 10 | finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations such as dressings and mordants of a kind used in the textile, paper, leather or like industries, n.e.s., with a basis of amylaceous substances |
3809 91 | finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the textile or similar industries, n.e.s. (excl. those with a basis of amylaceous substances) |
3809 92 | finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the paper or similar industries, n.e.s. (excl. those with a basis of amylaceous substances) |
3809 93 | finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs, and other products and preparations, e.g. dressings and mordants of a kind used in the leather or similar industries, n.e.s. (excl. those with a basis of amylaceous substances) |
3810 10 | pickling preparations for metal surfaces; soldering, brazing or welding pastes and powders consisting of metal and other materials |
3812 20 | compound plasticisers for rubber or plastics, n.e.s. |
3813 00 | preparations and charges for fire-extinguishers; charged fire-extinguishing grenades (excl. full or empty fire-extinguishing devices, whether or not portable, unmixed chemically undefined products with fire-extinguishing properties in other forms) |
3814 00 | organic composite solvents and thinners, n.e.s.; prepared paint or varnish removers (excl. nail varnish remover) |
3815 11 | supported catalysts with nickel or a nickel compound as the active substance, n.e.s. |
3815 12 | supported catalysts with precious metal or a precious-metal compound as the active substance, n.e.s. |
3815 19 | supported catalysts, n.e.s. (excl. with precious metal, a precious-metal compound, nickel or a nickel compound as the active substance) |
3815 90 | reaction initiators, reaction accelerators and catalytic preparations, n.e.s. (excl. rubber accelerators and supported catalysts) |
3816 00 10 | Dolomite ramming mix |
3817 00 | Mixed alkylbenzenes and mixed alkylnaphthalenes, other than those of heading 2707 or 2902 |
3820 00 | anti-freezing preparations and prepared de-icing fluids (excl. prepared additives for mineral oils or other liquids used for the same purposes as mineral oils) |
3823 13 | tall oil fatty acids, industrial |
3827 90 | Mixtures containing halogenated derivatives of methane, ethane or propane, not elsewhere specified or included (excl. those of subheadings 3827 11 to 3827 69) |
3824 99 | chemical products and preparations of the chemical or allied industries, incl. those consisting of mixtures of natural products, n.e.s. - other |
3825 90 | residual products of the chemical or allied industries, n.e.s. (excl. waste) |
3826 00 | biodiesel and mixtures thereof, not containing or containing < 70 % by weight of petroleum oils or oils obtained from bituminous minerals |
3901 40 | ethylene-alpha-olefin copolymers, having a specific gravity of < 0,94, in primary forms |
3902 20 | polyisobutylene, in primary forms |
3902 30 | propylene copolymers, in primary forms |
3902 90 | polymers of propylene or of other olefins, in primary forms (excl. polypropylene, polyisobutylene and propylene copolymers) |
3903 19 | polystyrene, in primary forms (excl. expansible) |
3903 90 | polymers of styrene, in primary forms (excl. polystyrene, styrene-acrylonitrile copolymers ‘san’ and acrylonitrile-butadiene-styrene ‘abs’) |
3904 10 | poly‘vinyl chloride’, in primary forms, not mixed with any other substances |
3904 50 | vinylidene chloride polymers, in primary forms |
3905 12 | poly‘vinyl acetate’, in aqueous dispersion |
3905 19 | poly‘vinyl acetate’, in primary forms (excl. in aqueous dispersion) |
3905 21 | vinyl acetate copolymers, in aqueous dispersion |
3905 29 | vinyl acetate copolymers, in primary forms (excl. in aqueous dispersion) |
3905 91 | copolymers of vinyl, in primary forms (excl. vinyl chloride-vinyl acetate copolymers and other vinyl chloride copolymers, and vinyl acetate copolymers) |
3906 10 | poly‘methyl methacrylate’, in primary forms |
3906 90 | acrylic polymers, in primary forms (excl. poly‘methyl methacrylate’) |
3907 21, 3907 29 | polyethers, in primary forms (excl. polyacetals) |
3907 40 | polycarbonates, in primary forms |
3907 70 | poly‘lactic acid’, in primary forms |
3907 91 | unsaturated polyallyl esters and other polyesters, in primary forms (excl. polycarbonates, alkyd resins, poly‘ethylene terephthalate’ and poly‘lactic acid’) |
3908 10 | polyamides-6, -11, -12, -6,6, -6,9, -6,10 or -6,12, in primary forms |
3908 90 | polyamides, in primary forms (excl. polyamides-6, -11, -12, -6,6, -6,9, -6,10 and -6,12) |
3909 20 | melamine resins, in primary forms |
3909 39 | amino-resins, in primary forms (excl. urea, thiourea and melamine resins and mdi) |
3909 50 | polyurethanes, in primary forms |
3912 11 | non-plasticised cellulose acetates, in primary forms |
3912 90 | cellulose and chemical derivatives thereof, n.e.s., in primary forms (excl. cellulose acetates, cellulose nitrates and cellulose ethers) |
3915 20 | waste, parings and scrap, of polymers of styrene |
3917 10 | artificial guts ‘sausage casings’ of hardened protein or cellulose materials |
3917 23 | rigid tubes, pipes and hoses, of polymers of vinyl chloride |
3917 31 | flexible tubes, pipes and hoses, of plastics, burst pressure >= 27,6 mpa |
3917 32 | flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings |
3917 33 | flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectors |
3920 10 | plates, sheets, film, foil and strip, of non-cellular polymers of ethylene, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 ) |
3920 61 | plates, sheets, film, foil and strip, of non-cellular polycarbonates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. those of poly‘methyl methacrylate’, self-adhesive products, and floor, wall and ceiling coverings of heading 3918 ) |
3920 69 | plates, sheets, film, foil and strip, of non-cellular polyesters, not reinforced, laminated, supported or similarly combined with other materials, not worked or only surface-worked, or only cut to rectangular, incl. square, shapes (excl. polycarbonates, polythylene terephthalate and other unsaturated polyesters, self-adhesive products, and floor, wall and ceiling coverings in heading 3918 ) |
3920 73 | plates, sheets, film, foil and strip, of non-cellular cellulose acetates, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, and floor, wall and ceiling coverings of heading 3918 ) |
3920 91 | plates, sheets, film, foil and strip, of non-cellular poly‘vinyl butyral’, not reinforced, laminated, supported or similarly combined with other materials, without backing, unworked or merely surface-worked or merely cut into squares or rectangles (excl. self-adhesive products, floor, wall and ceiling coverings of heading 3918 ) |
3921 19 | plates, sheets, film, foil and strip, of cellular plastic, unworked or merely surface-worked or merely cut into squares or rectangles (excl.those of polymers of styrene, vinyl chloride, polyurethanes and regenerated cellulose, self-adhesive products, floor, wall and ceiling coverings of heading 3918 and sterile surgical or dental adhesion barriers of subheading 3006 10 30 ) |
3922 90 | bidets, lavatory pans, flushing cisterns and similar sanitary ware, of plastics (excl. baths, shower-baths, sinks, washbasins, lavatory seats and covers) |
3925 20 | doors, windows and their frames and thresholds for doors, of plastics |
4002 11 | styrene-butadiene rubber latex ‘sbr’; carboxylated styrene-butadiene rubber latex ‘xsbr’ |
4002 20 | butadiene rubber ‘br’, in primary forms or in plates, sheets or strip |
4002 31 | isobutylene isoprene rubber ‘iir’, in primary forms or in plates, sheets or strip |
4002 39 | halo-isobutene-isoprene rubber ‘ciir’ or ‘biir’, in primary forms or in plates, sheets or strip |
4002 41 | chloroprene latex ‘chlorobutadiene rubber, cr’ |
4002 51 | latex of acrylonitrile-butadiene rubber ‘nbr’ |
4002 80 | mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, in primary forms or in plates, sheets or strip |
4002 91 | synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excl. styrene-butadiene rubber ‘sbr’, carboxylated styrene-butadiene rubber ‘xsbr’, butadiene rubber ‘br’, isobutylene isoprene rubber ‘iir’, halo-isobutene-isoprene rubber ‘ciir’ or ‘biir’, chloroprene rubber ‘cr’, acrylonitrile-butadiene rubber ‘nbr’, isoprene rubber ‘ir’ and non-conjugated ethylene-propylene diene rubber ‘epdm’) |
4002 99 | synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip (excl. latex, styrene-butadiene rubber ‘sbr’, carboxylated styrene-butadiene rubber ‘xsbr’, butadiene rubber ‘br’, isobutylene isoprene rubber ‘iir’, halo-isobutene-isoprene rubber ‘ciir’ or ‘biir’, chloroprene rubber ‘cr’, acrylonitrile-butadiene rubber ‘nbr’, isoprene rubber ‘ir’ and non-conjugated ethylene-propylene diene rubber ‘epdm’) |
4005 10 | rubber, unvulcanised, compounded with carbon black or silica, in primary forms or in plates, sheets or strip |
4005 20 | compounded rubber, unvulcanised, in the form of solutions or dispersions (excl. rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils) |
4005 91 | compounded rubber, unvulcanised, in the form of plates, sheets or strip (excl. rubber compounded with carbon black or silica, and mixtures of natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums containing synthetic rubber or factice derived from oils) |
4005 99 | compounded, unvulcanised rubber in primary forms (excl. solutions and dispersions, those containing carbon black or silica, mixtures of natural rubber, balata, gutta-percha, guayule, chicle or similar types of natural rubber with synthetic rubber or factice, and those in the form of plates, sheets or strip) |
4006 10 | ‘camel-back’ strips of unvulcanised rubber, for retreading rubber tyres |
4008 21 | plates, sheets and strip, of non-cellular rubber |
4009 12 | tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), not reinforced or otherwise combined with other materials, with fittings |
4009 41 | tubes, pipes and hoses, of vulcanised rubber (excl. hard rubber), reinforced or otherwise combined with materials other than metal or textile materials, without fittings |
4010 31 | endless transmission belts of trapezoidal cross-section ‘v-belts’, of vulcanised rubber, v-ribbed, of an outside circumference > 60 cm but <= 180 cm |
4010 33 | endless transmission belts of trapezoidal cross-section ‘v-belts’, of vulcanised rubber, v-ribbed, of an outside circumference > 180 cm but <= 240 cm |
4010 35 | endless synchronous belts, of vulcanised rubber, of an outside circumference > 60 cm but <= 150 cm |
4010 36 | endless synchronous belts, of vulcanised rubber, of an outside circumference > 150 cm but <= 198 cm |
4010 39 | transmission belts or belting, of vulcanised rubber (excl. endless transmission belts of trapezoidal cross-section ‘v-belts’, v-ribbed, of an outside circumference > 60 cm but <= 240 cm and endless synchronous belts of an outside circumference > 60 cm but <= 198 cm) |
4012 11 | retreaded pneumatic tyres, of rubber, of a kind used on motor cars ‘incl. station wagons and racing cars’ |
4012 13 | retreaded pneumatic tyres, of rubber, of a kind used on aircraft |
4012 19 | retreaded pneumatic tyres, of rubber (excl. of a kind used on motor cars, station wagons, racing cars, buses, lorries and aircraft) |
4012 20 | used pneumatic tyres of rubber |
4016 93 | gaskets, washers and other seals, of vulcanised rubber (excl. hard rubber and those of cellular rubber) |
4407 19 | coniferous wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. pine ‘pinus spp.’, fir ‘abies spp.’ and spruce ‘picea spp.’) |
4407 92 | beech ‘fagus spp.’, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm |
4407 94 | cherry ‘prunus spp.’, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm |
4407 97 | poplar and aspen ‘populus spp.’, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm |
4407 99 | wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness of > 6 mm (excl. tropical wood, coniferous wood, oak ‘quercus spp.’, beech ‘fagus spp.’, maple ‘acer spp.’, cherry ‘prunus spp.’, ash ‘fraxinus spp.’, birch ‘betula spp.’, poplar and aspen ‘populus spp.’) |
4408 10 | sheets for veneering, incl. those obtained by slicing laminated wood, for coniferous plywood or for other similar laminated coniferous wood and other coniferous wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness of <= 6 mm |
4411 13 | medium density fibreboard ‘mdf’ of wood, of a thickness > 5 mm but <= 9 mm |
4411 94 | fibreboard of wood or other ligneous materials, whether or not agglomerated with resins or other organic bonding agents, of a density of <= 0,5 g/cm3 (excl. medium density fibreboard ‘mdf’) |
4412 31 | plywood consisting solely of sheets of wood <= 6 mm thick, with at least one outer ply of tropical wood (excl. sheets of compressed wood, cellular wood panels, inlaid wood and sheets identifiable as furniture components) |
4412 34 | plywood consisting solely of sheets of wood <= 6 mm thick, with at least one outer ply of non-coniferous wood (excl. of bamboo, with an outer ply of tropical wood or of alder, ash, beech, birch, cherry, chestnut, elm, eucalyptus, hickory, horse chestnut, lime, maple, oak, plane tree, poplar, aspen, robinia, tulipwood or walnut, and sheets of compressed wood, cellular wood panels, inlaid wood and sheets identifiable as furniture components) |
4412 51, 4412 52, 4412 59 | laminated wood as blockboard, laminboard or battenboard (excl. of bamboo, plywood consisting solely of sheets of wood <= 6 mm thick, sheets of compressed wood, inlaid wood and sheets identifiable as furniture components) |
4416 00 | casks, barrels, vats, tubs and other coopers’ products parts thereof, of wood, incl. staves |
4418 40 | wooden shuttering for concrete constructional work (excl. plywood boarding) |
4418 81, 4418 82, 4418 83, 4418 89 | posts and beams, of wood |
4418 79 | flooring panels, assembled, of wood other than bamboo (excl. multilayer panels and panels for mosaic floors) |
4503 10 | corks and stoppers of all types, of natural cork, incl. round-edged blanks |
4504 10 | tiles of any shape, blocks, plates, sheets and strip, solid cylinders, incl. discs, of agglomerated cork |
4701 00 | mechanical wood pulp, not chemically treated |
4703 19 | unbleached non-coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades) |
4703 21 | semi-bleached or bleached coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades) |
4703 29 | semi-bleached or bleached non-coniferous chemical wood pulp, soda or sulphate (excl. dissolving grades) |
4704 11 | unbleached coniferous chemical wood pulp, sulphite (excl. dissolving grades) |
4704 21 | semi-bleached or bleached coniferous chemical wood pulp, sulphite (excl. dissolving grades) |
4704 29 | semi-bleached or bleached non-coniferous chemical wood pulp, sulphite (excl. dissolving grades) |
4705 00 | wood pulp obtained by a combination of mechanical and chemical pulping processes |
4706 30 | pulps of fibrous cellulosic bamboo material |
4706 92 | chemical pulp of fibrous cellulosic material (excl. that of bamboo, wood, cotton linters and fibres derived from recovered [waste and scrap] paper or paperboard) |
4707 10 | recovered ‘waste and scrap’ paper or paperboard of unbleached kraft paper, corrugated paper or corrugated paperboard |
4707 30 | recovered ‘waste and scrap’ paper or paperboard made mainly of mechanical pulp, e.g. newspapers, journals and similar printed matter |
4802 20 | paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper and paperboard, uncoated, in rolls or in square or rectangular sheets, of any size |
4802 40 | wallpaper base, uncoated |
4802 58 | uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or in square or rectangular sheets, of any size, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, weighing > 150 g/m2, n.e.s. |
4802 61 | uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls of any size, of which > 10 % by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process, n.e.s. |
4804 11 | unbleached kraftliner, uncoated, in rolls of a width > 36 cm |
4804 19 | kraftliner, uncoated, in rolls of a width > 36 cm (excl. unbleached and goods of heading 4802 and 4803 ) |
4804 21 | Unbleached sack kraft paper, uncoated, in rolls or sheets, other than that of heading 4802 or 4803 |
4804 29 | sack kraft paper, uncoated, in rolls or sheets (excl. unbleached, and goods of heading 4802 or 4803) |
4804 31 | unbleached kraft paper and paperboard, uncoated, weighing <= 150 g/m2 (excl. kraftliner, sack kraft paper and goods of heading 4802 or 4803) |
4804 39 | kraft paper and paperboard, uncoated, weighing <= 150 g/m2 (excl. unbleached, kraftliner, sack kraft paper and goods of heading 4802 or 4803) |
4804 41 | unbleached kraft paper and paperboard, uncoated, weighing > 150 g/m2 to < 225 g/m2 (excl. kraftliner, sack kraft paper, and goods of heading 4802 or 4803) |
4804 42 | kraft paper and paperboard, uncoated, weighing > 150 g/m2 to < 225 g/m2, bleached uniformly in the mass and containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content consists of wood fibres obtained by a chemical process (excl. unbleached, kraftliner, sack kraft paper, and goods of heading 4802 or 4803) |
4804 49 | kraft paper and paperboard, uncoated, weighing > 150 g/m2 to < 225 g/m2 (excl. unbleached, bleached uniformly in the mass and containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content consists of wood fibres obtained by a chemical process, kraftliner, sack kraft paper, and goods of heading 4802 or 4803) |
4804 52 | kraft paper and paperboard, uncoated, in rolls or rectangular sheets, weighing >= 225 g/m2, bleached uniformly in the mass, containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content (excl. unbleached, kraftliner, sack kraft paper and goods of heading 4802 or 4803) |
4804 59 | kraft paper and paperboard, uncoated, in rolls or rectangular sheets, weighing >= 225 g/m2 (excl. unbleached, bleached uniformly in the mass, containing > 95 % chemically processed wood fibre by weight in relation to the total fibre content, kraftliner, sack kraft paper and goods of heading 4802 or 4803) |
4805 24 | testliner ‘recycled liner board’, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2 |
4805 25 | testliner ‘recycled liner board’, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g/m2 |
4805 40 | filter paper and paperboard, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
4805 91 | paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing <= 150 g/m2, n.e.s. |
4805 92 | paper and paperboard, uncoated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state, weighing > 150 g/m2 to < 225 g/m2, n.e.s. |
4806 10 | vegetable parchment, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
4806 20 | greaseproof papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
4806 30 | tracing papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
4806 40 | glassine and other glazed transparent or translucent papers, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. vegetable parchment, greaseproof papers and tracing papers) |
4807 00 | composite paper and paperboard ‘made by sticking flat layers of paper or paperboard together with an adhesive’, not surface-coated or impregnated, whether or not internally reinforced, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state |
4808 90 | paper and paperboard, creped, crinkled, embossed or perforated, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. sack kraft and other kraft paper, and goods of heading 4803 ) |
4809 20 | self-copy paper, whether or not printed, in rolls of a width > 36 cm or in square or rectangular sheets with one side > 36 cm and the other side > 15 cm in the unfolded state (excl. carbon and similar copying papers) |
4810 13 | paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in rolls of any size |
4810 19 | paper and paperboard used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which <= 10 % by weight of the total fibre content consists of such fibres, coated on one or both sides with kaolin or other inorganic substances, in square or rectangular sheets with one side > 435 mm or with one side <= 435 mm and the other side > 297 mm in the unfolded state |
4810 22 | lightweight coated paper used for writing, printing or other graphic purposes, total weight <= 72 g/m2, coating weight <= 15 g/m2 per side, on a base of which >= 50 % by weight of the total fibre content consists of fibres obtained by a mechanical process, coated on both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size |
4810 31 | kraft paper and paperboard, bleached uniformly throughout the mass and containing > 95 % chemically processed wood fibres by weight in relation to the total fibre content, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size, weighing <= 150 g/m2 (excl. that for writing, printing or other graphic purposes) |
4810 39 | kraft paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes; paper and paperboard bleached uniformly in the mass and containing > 95 % chemically processed wood fibres by weight in relation to the total fibre content) |
4810 92 | multi-ply paper and paperboard, coated on one or both sides with kaolin or other inorganic substances, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes, kraft paper and paperboard) |
4810 99 | paper and paperboard, coated on one or both sides with kaolin ‘china clay’ or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. that for writing, printing or other graphic purposes, kraft paper and paperboard, multi-ply paper and paperboard, and with no other coating) |
4811 10 | tarred, bituminised or asphalted paper and paperboard, in rolls or in square or rectangular sheets, of any size |
4811 51 | paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size, bleached and weighing > 150 g/m2 (excl. adhesives) |
4811 59 | paper and paperboard, surface-coloured, surface-decorated or printed, coated, impregnated or covered with artificial resins or plastics, in rolls or in square or rectangular sheets, of any size (excl. bleached and weighing > 150 g/m2, and adhesives) |
4811 60 | paper and paperboard, coated, impregnated or covered with wax, paraffin wax, stearin, oil or glycerol, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 and 4818 ) |
4811 90 | paper, paperboard, cellulose wadding and webs of soft cellulose, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or in square or rectangular sheets, of any size (excl. goods of heading 4803 , 4809 , 4810 and 4818 , and of subheading 4811 10 to 4811 60 ) |
4814 90 | wallpaper and similar wallcoverings of paper, and window transparencies of paper (excl. wallcoverings of paper, consisting of paper coated or covered, on the face side, with a grained, embossed, coloured or design-printed or otherwise decorated layer of plastics) |
4819 20 | folding cartons, boxes and cases, of non-corrugated paper or paperboard |
4822 10 | bobbins, spools, cops and similar supports of paper pulp, paper or paperboard, whether or not perforated or hardened, for winding textile yarn |
4823 20 | filter paper and paperboard, in strips or rolls of a width <= 36 cm, in rectangular or square sheets, of which no side > 36 cm in the unfolded state, or cut to shape other than rectangular or square |
4823 40 | rolls, sheets and dials, printed for self-recording apparatus, in rolls of a width <= 36 cm, in rectangular or square sheets of which no side > 36 cm in the unfolded state, or cut into dials |
4823 70 | moulded or pressed articles of paper pulp, n.e.s. |
5105 39 | fine animal hair, carded or combed (excl. wool and hair of kashmir ‘cashmere’ goats) |
5105 40 | coarse animal hair, carded or combed |
5106 10 | carded wool yarn containing >= 85 % wool by weight (excl. that put up for retail sale) |
5106 20 | carded wool yarn containing predominantly, but < 85 % wool by weight (excl. that put up for retail sale) |
5107 20 | yarn of combed wool containing predominantly, but < 85 % wool by weight (excl. that put up for retail sale) |
5112 11 | woven fabrics containing >= 85 % combed wool or combed fine animal hair by weight and weighing <= 200 g/m2 (excl. fabrics for technical uses of heading 5911 ) |
5112 19 | woven fabrics containing >= 85 % combed wool or combed fine animal hair by weight and weighing > 200 g/m2 |
5205 21 | single cotton yarn, of combed fibres, containing >= 85 % cotton by weight and with a linear density of >= 714,29 decitex ‘<= mn 14’ (excl. sewing thread and yarn put up for retail sale) |
5205 28 | single cotton yarn, of combed fibres, containing >= 85 % cotton by weight and with a linear density of < 83,33 decitex ‘> mn 120’ (excl. sewing thread and yarn put up for retail sale) |
5205 41 | multiple ‘folded’ or cabled cotton yarn, of combed fibres, containing >= 85 % cotton by weight and with a linear density of >= 714,29 decitex ‘<= mn 14’ per single yarn (excl. sewing thread and yarn put up for retail sale) |
5206 42 | multiple ‘folded’ or cabled cotton yarn containing predominantly, but < 85 % cotton by weight, of combed fibres and with a linear density of 232,56 decitex to < 714,29 decitex ‘> mn 14 to mn 43’ per single yarn (excl. sewing thread and yarn put up for retail sale) |
5209 11 | plain woven fabrics of cotton, containing >= 85 % cotton by weight and weighing > 200 g/m2, unbleached |
5211 19 | woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, unbleached (excl. those in three-thread or four-thread twill, incl. cross twill, and plain woven fabrics) |
5211 51 | plain woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed |
5211 59 | woven fabrics of cotton, containing predominantly, but < 85 % cotton by weight, mixed principally or solely with man-made fibres and weighing > 200 g/m2, printed (excl. those in three-thread or four-thread twill, incl. cross twill, and plain woven fabrics) |
5308 20 | hemp yarn |
5402 63 | multiple ‘folded’ or cabled filament yarn of polypropylene, incl. monofilament of < 67 decitex (excl. sewing thread, yarn put up for retail sale and textured yarn) |
5403 33 | filament yarn of cellulose acetate, incl. monofilament of < 67 decitex, single (excl. sewing thread, high-tenacity yarn and yarn put up for retail sale) |
5403 42 | multiple ‘folded’ or cabled filament yarn of cellulose acetate, incl. monofilament of < 67 decitex (excl. sewing thread, high-tenacity yarn and yarn put up for retail sale) |
5404 12 | polypropylene monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excl. elastomers) |
5404 19 | synthetic monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm (excl. of elastomers and polypropylene) |
5404 90 | strip and the like, e.g. artificial straw, of synthetic textile material, with an apparent width of <= 5 mm |
5407 30 | woven fabrics of synthetic filament yarn, incl. monofilament of >= 67 decitex and with a cross sectional dimension of <= 1 mm, consisting of layers of parallel textile yarns superimposed on each other at acute or right angles, the layers being bonded at the intersections of the yarns by an adhesive or by thermal bonding |
5501 90 | synthetic filament tow as specified in note 1 to chapter 55 (excl. that of acrylic, modacrylic, polyesters, polypropylene, nylon or other polyamide filament) |
5502 10 | artificial filament tow as specified in note 1 to chapter 55, of acetate |
5503 19 | staple fibres of nylon or other polyamides, not carded, combed or otherwise processed for spinning (excl. those of aramids) |
5503 40 | staple fibres of polypropylene, not carded, combed or otherwise processed for spinning |
5504 90 | artificial staple fibres, not carded, combed or otherwise processed for spinning (excl. those of viscose rayon) |
5506 40 | staple fibres of polypropylene, carded, combed or otherwise processed for spinning |
5507 00 | artificial staple fibres, carded, combed or otherwise processed for spinning |
5512 21 | woven fabrics containing >= 85 % acrylic or modacrylic staple fibres by weight, unbleached or bleached |
5512 99 | woven fabrics containing >= 85 % synthetic staple fibres by weight, dyed, made of yarn of different colours or printed (excl. those of acrylic, modacrylic or polyester staple fibres) |
5516 44 | woven fabrics containing predominantly, but < 85 % artificial staple fibres by weight, mixed principally or solely with cotton, printed |
5516 94 | woven fabrics containing predominantly, but < 85 % artificial staple fibres by weight, other than those mixed principally or solely with cotton, wool, fine animal hair or man-made filament, printed |
5601 29 | wadding of textile materials and articles thereof (excl. of cotton or man-made fibres; sanitary towels and tampons, napkins and napkin liners for babies and similar sanitary articles, wadding and articles thereof, impregnated or covered with medicated substances or put up for retail for medical, surgical, dental or veterinary purposes, or impregnated, coated or covered with perfumes, make-up, soaps, cleansing agents, etc.) |
5601 30 | textile flock and dust and mill neps |
5604 90 | textile yarn, strip and the like of heading 5404 and 5405 , impregnated, coated, covered or sheathed with rubber or plastics (excl. imitation catgut, thread and cord with fish-hook attachments or otherwise put up as fishing line) |
5605 00 | metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , of textile fibres, combined with metal in the form of thread, strip or powder or covered with metal (excl. yarns manufactured from a mixture of textile fibres and metal fibres, with anti-static properties; yarns reinforced with metal wire; articles with the character of trimmings) |
5607 41 | binder or baler twine, of polyethylene or polypropylene |
5801 27 | warp pile fabrics, of cotton (excl. terry towelling and similar woven terry fabrics, tufted textile fabrics and narrow woven fabrics of heading 5806 ) |
5803 00 | gauze (excl. narrow woven fabrics of heading 5806 ) |
5806 40 | narrow fabrics consisting of warp without weft assembled by means of an adhesive ‘bolducs’, with a width of <= 30 cm |
5901 10 | textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books, the manufacture of boxes and articles of cardboard or the like |
5905 00 | textile wallcoverings |
5908 00 | textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas-mantle fabric for incandescent gas mantles, whether or not impregnated (excl. wax-covered wicks of the taper variety, fuses and detonating fuses, wicks in the form of textile yarn and glass-fibre wicks) |
5910 00 | transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material (excl. those of a thickness of < 3 mm and of indeterminate length or cut to length only, and those impregnated, coated, covered or laminated with rubber or made of yarn or cord impregnated or coated with rubber) |
5911 10 | textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, incl. narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles ‘weaving beams’ |
5911 31 | textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing < 650 g/m2 |
5911 32 | textile fabrics and felts, endless or fitted with linking devices, of a kind used in papermaking or similar machines, e.g. for paper pulp or asbestos-cement, weighing >= 650 g/m2 |
5911 40 | straining cloth of a kind used in oil-presses or for similar technical purposes, incl. that of human hair |
6001 99 | pile fabrics, knitted or crocheted (excl. cotton or man-made fibres and ‘long pile’ fabrics) |
6003 40 | knitted or crocheted fabrics of artificial fibres, of a width of <= 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, knitted or crocheted fabrics, impregnated, coated, covered or laminated, and sterile surgical or dental adhesion barriers of subheading 3006 10 30 ) |
6005 36 | unbleached or bleached warp knit fabrics of synthetic fibres ‘incl. those made on galloon knitting machines’, of a width of > 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) |
6005 44 | printed warp knit fabrics of artificial fibres ‘incl. those made on galloon knitting machines’, of a width of > 30 cm (excl. those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) |
6006 10 | fabrics, knitted or crocheted, of a width of > 30 cm, of wool or fine animal hair (excl. warp knit fabrics ‘incl. those made on galloon knitting machines’, those containing by weight >= 5 % of elastomeric yarn or rubber thread, and pile fabrics, incl. ‘long pile’, looped pile fabrics, labels, badges and similar articles, and knitted or crocheted fabrics, impregnated, coated, covered or laminated) |
6309 00 | worn clothing and clothing accessories, blankets and travelling rugs, household linen and articles for interior furnishing, of all types of textile materials, incl. all types of footwear and headgear, showing signs of appreciable wear and presented in bulk or in bales, sacks or similar packings (excl. carpets, other floor coverings and tapestries) |
6802 92 | calcareous stone, in any form (excl. marble, travertine and alabaster, tiles, cubes and similar articles of subheading 6802 10 , imitation jewellery, clocks, lamps and lighting fittings and parts thereof, original sculptures and statuary, setts, curbstones and flagstones) |
6804 23 | millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of natural stone (excl. of agglomerated natural abrasives or ceramics, perfumed pumice stones, hand sharpening or polishing stones, and grinding wheels etc. specifically for dental drill engines) |
6806 10 | slag-wool, rock-wool and similar mineral wools, incl. intermixtures thereof, in bulk, sheets or rolls |
6806 90 | mixtures and articles of heat-insulating, sound-insulating or sound absorbing mineral materials (excl. slag-wool, rock-wool and similar mineral wools, exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials, articles of light concrete, asbestos-cement, cellulose fibre-cement or the like, mixtures and other articles of or based on asbestos, and ceramic products) |
6807 10 | articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch, in rolls |
6807 90 | articles of asphalt or of similar materials, e.g. petroleum bitumen or coal tar pitch (excl. in rolls) |
6809 19 | boards, sheets, panels, tiles and similar articles, of plaster or compositions based on plaster (excl. ornamented, faced or reinforced with paper or paperboard only, and with plaster agglomerated articles for heat-insulation, sound-insulation or sound absorption) |
6810 91 | prefabricated structural components for building or civil engineering of cement, concrete or artificial stone, whether or not reinforced |
6811 81 | corrugated sheets of cellulose fibre-cement or the like, not containing asbestos |
6811 82 | sheets, panels, paving, tiles and similar articles, of cellulose fibre-cement or the like, not containing asbestos (excl. corrugated sheets) |
6811 89 | articles of cellulose fibre-cement or the like, not containing asbestos (excl. corrugated and other sheets, panels, tiles and similar articles) |
6813 89 | friction material and articles thereof, e.g. sheets, rolls, strips, segments, discs, washers and pads, for clutches and the like, with a basis of mineral substances or cellulose, whether or not combined with textile or other materials (excl. containing asbestos, and brake linings and pads) |
6814 90 | worked mica and articles of mica (excl. electrical insulators, insulating fittings, resistors and capacitors, protective goggles of mica and their glasses, mica in the form of christmas tree decorations, and plates, sheets and strips of agglomerated or reconstituted mica, whether or not on supports) |
6901 00 | bricks, blocks, tiles and other ceramic goods of siliceous fossil meals, e.g. kieselguhr, tripolite or diatomite, or of similar siliceous earths |
6904 10 | building bricks (excl. those of siliceous fossil meals or similar siliceous earths, and refractory bricks of heading 6902 ) |
6905 10 | roofing tiles |
6905 90 | ceramic chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods (excl. of siliceous fossil meals or similar siliceous earths, refractory ceramic constructional components, pipes and other components for drainage and similar purposes, and roofing tiles) |
6906 00 | ceramic pipes, conduits, guttering and pipe fittings (excl. of siliceous fossil meals or similar siliceous earths, refractory ceramic goods, chimney liners, pipes specifically manufactured for laboratories, insulating tubing and fittings and other piping for electrotechnical purposes) |
6907 22 | ceramic flags and paving, hearth or wall tiles, of a water absorption coefficient by weight > 0,5 % but <= 10 % (excl. refractory, mosaic cubes and finishing ceramics) |
6907 40 | finishing ceramics (excl. refractory) |
6909 90 | ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods (excl. general-purpose storage vessels for laboratories, containers for shops and household articles) |
7002 20 | rods of glass, unworked |
7002 31 | tubes of fused quartz or other fused silica, unworked |
7002 32 | tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°c to 300°c, unworked (excl. tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°c to 300°c) |
7002 39 | tubes of glass, unworked (excl. tubes of glass having a linear coefficient of expansion <= 5 x 10-6 per kelvin within a temperature range of 0°c to 300°c or of fused quartz or other fused silica) |
7003 30 | profiles of glass, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked |
7004 20 | sheets of glass, drawn or blown, coloured throughout the mass ‘body tinted’ opacified, flashed or having an absorbent, reflecting or non-reflecting layer, but not otherwise worked |
7005 10 | float glass and surface ground or polished glass, in sheets, having an absorbent, reflecting or non-reflecting layer, but not otherwise worked (excl. wired glass) |
7005 30 | float glass and surface ground and polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, wired, but not otherwise worked |
7007 11 | toughened ‘tempered’ safety glass, of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels and other vehicles |
7007 29 | laminated safety glass (excl. glass of size and shape suitable for incorporation in motor vehicles, aircraft, spacecraft, vessels or other vehicles, multiple-walled insulating units) |
7011 10 | glass envelopes, incl. bulbs and tubes, open, and glass parts thereof, without fittings, for electric lighting |
7202 92 | ferro-vanadium |
7207 12 | semi-finished products of iron or non-alloy steel containing, by weight, < 0,25 % of carbon, of rectangular ‘other than square’ cross-section, the width measuring >= twice the thickness |
7208 25 | flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, in coils, simply hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm, pickled, without patterns in relief |
7208 90 | flat-rolled products of iron or steel, of a width >= 600 mm, hot-rolled and further worked, but not clad, plated or coated |
7209 25 | flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of >= 3 mm |
7209 28 | flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, not in coils, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, of a thickness of < 0,5 mm |
721 090 | flat-rolled products of iron or non-alloy steel, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad, plated or coated (excl. tinned, plated or coated with lead, zinc, chromium oxides, chromium and chromium oxides, or aluminium, painted, varnished or coated with plastics) |
721 113 | flat-rolled products of iron or non-alloy steel, simply hot-rolled on four faces or in a closed box pass, not clad, plated or coated, of a width of > 150 mm but < 600 mm and a thickness of >= 4 mm, not in coils, without patterns in relief, commonly known as ‘wide flats’ |
721 114 | flat-rolled products of iron or non-alloy steel, of a width < 600 mm, not further worked than hot-rolled, not clad, plated or coated, of a thickness of >= 4,75 mm (excl. ‘wide flats’) |
721 129 | flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, simply cold-rolled ‘cold-reduced’, not clad, plated or coated, containing by weight >= 0,25 % of carbon |
721 210 | flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, tinned |
721 260 | flat-rolled products of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled ‘cold-reduced’, clad |
721 320 | bars and rods, hot-rolled, in irregularly wound coils, of non-alloy free-cutting steel (excl. bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process) |
721 399 | bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel (excl. products of circular cross-section measuring < 14 mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) |
721 550 | bars and rods, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. of free-cutting steel) |
721 610 | u, i or h sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm |
721 622 | t sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of < 80 mm |
721 633 | h sections of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of a height >= 80 mm |
721 669 | angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished (excl. profiled sheet) |
721 891 | semi-finished products of stainless steel, of rectangular ‘other than square’ cross-section |
722 230 | other bars and rods of stainless steel, cold-formed or cold-finished and further worked, or not further worked than forged, or forged, or hot-formed by other means and further worked |
722 410 | steel, alloy, other than stainless, in ingots or other primary forms (excl. waste and scrap in ingot form, and products obtained by continuous casting) |
722 519 | flat-rolled products of silicon-electrical steel, of a width of >= 600 mm, non-grain-oriented |
722 530 | flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, not further worked than hot-rolled, in coils (excl. products of silicon-electrical steel) |
722 599 | flat-rolled products of alloy steel other than stainless, of a width of >= 600 mm, hot-rolled or cold-rolled ‘cold-reduced’ and further worked (excl. plated or coated with zinc and products of silicon-electrical steel) |
722 691 | flat-rolled products of alloy steel other than stainless, of a width of < 600 mm, not further worked than hot-rolled (excl. products of high-speed steel or silicon-electrical steel) |
722 830 | bars and rods of alloy steel other than stainless, not further worked than hot-rolled, hot-drawn or extruded (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
722 860 | bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excl. products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) |
722 870 | angles, shapes and sections of alloy steel other than stainless, n.e.s. |
722 880 | hollow drill bars and rods, of alloy or non-alloy steel |
722 990 | wire of alloy steel other than stainless, in coils (excl. bars and rods and wire of silico-manganese steel) |
7301 20 | angles, shapes and sections, of iron or steel, welded |
7304 24 | casing and tubing, seamless, of a kind used for drilling for oil or gas, of stainless steel |
7306 50 | Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excl. tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) |
7307 22 | Threaded elbows, bends and sleeves |
7309 00 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment |
7314 12 | Endless bands of stainless steel wire, for machinery |
7318 24 | Cotters and cotter pins, of iron or steel |
7320 20 | Helical springs, of iron or steel (excl. flat spiral springs, clock and watch springs, springs for sticks and handles of umbrellas or parasols, and shock absorbers of section 17) |
7322 90 | Air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel |
7324 29 | baths of steel sheet |
7407 10 | bars, rods and profiles, of refined copper |
7408 11 | wire of refined copper, with a maximum cross-sectional dimension of > 6 mm |
7408 19 | wire of refined copper, with a maximum cross-sectional dimension of <= 6 mm |
7409 11 | plates, sheets and strip, of refined copper, in coils, of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip) |
7409 19 | plates, sheets and strip, of refined copper, not in coils, of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip) |
7409 40 | plates, sheets and strip, of copper-nickel base alloys ‘cupro-nickel’ or copper-nickel-zinc base alloys ‘nickel silver’, of a thickness of > 0,15 mm (excl. expanded sheet and strip and electrically insulated strip) |
7415 21 | washers, ‘incl. spring washers and spring lock washers’, of copper |
7505 11 | bars, rods, profiles and wire, of non-alloy nickel, n.e.s. (excl. electrically insulated products) |
7505 21 | wire of non-alloy nickel (excl. electrically insulated products) |
7506 10 | plates, sheets, strip and foil, of non-alloy nickel (excl. expanded plates, sheets or strip) |
7507 11 | tubes and pipes of non-alloy nickel |
7605 19 | Wire of non-alloy aluminium, with a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614 , electrically insulated wires, strings for musical instruments) |
7605 29 | Wire, of aluminium alloys, having a maximum cross-sectional dimension of <= 7 mm (other than stranded wires, cables, ropes and other articles of heading 7614 , electrically insulated wires, strings for musical instruments) |
7606 92 | Plates, sheets and strip, of aluminium alloys, of a thickness of > 0,2 mm (other than square or rectangular) |
7607 20 | Aluminium foil, backed, of a thickness (excl. any backing) of <= 0,2 mm (excl. stamping foils of heading 3212 , and foil made up as christmas tree decorating material) |
7611 00 | Reservoirs, tanks, vats and similar containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) |
7612 90 | casks, drums, cans, boxes and similar containers, incl. rigid tubular containers, of aluminium, for any material (other than compressed or liquefied gas), of a capacity of <= 300 l, n.e.s. |
7616 10 | Nails, tacks, staples (other than those of heading 8305 ), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles............ |
7804 11 | Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0,2 mm |
7804 19 | Lead plates, sheets, strip and foil; lead powders and flakes - Plates, sheets, strip and foil - Other |
7905 00 | zinc plates, sheets, strip and foil |
8001 20 | unwrought tin alloys |
8003 00 | Tin bars, rods, profiles and wire |
8007 00 | Articles of tin |
8101 10 | tungsten powders |
8102 97 | Molybdenum waste and scrap (excl. ash and residues containing molybdenum) |
8105 90 | Articles of cobalt |
8109 31 | Zirconium waste and scrap - Containing less than 1“part hafnium to|500”parts zirconium by weight |
8109 39 | Zirconium waste and scrap - Other |
8109 91 | Articles of zirconium - Containing less than 1“part hafnium to|500”part zirconium by weight |
8109 99 | Articles of zirconium - Other |
8202 20 | Bandsaw blades of base metal |
8207 60 | Tools for boring or broaching |
8208 10 | Knives and cutting blades, for machines or for mechanical appliances - for metalworking |
8208 20 | Knives and cutting blades, for machines or for mechanical appliances - for wood-working |
8208 30 | Knives and cutting blades, for machines or for mechanical appliances - used by the food industry |
8208 40 | Knives and cutting blades, for machines or for mechanical appliances - for agricultural, horticultural or forestry machines |
8208 90 | Knives and cutting blades, for machines or for mechanical appliances - other |
8301 20 | locks used for motor vehicles, of base metal |
8301 70 | Keys presented separately |
8302 30 | Other mountings, fittings and similar articles suitable for motor vehicles |
8309 90 | Stoppers, caps and lids, incl. screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories of base metal (excl. crow corks) |
8402 12 | Watertube boilers with a steam production not exceeding 45 tonnes per hour |
8402 19 | Other vapour generating boilers, including hybrid boilers |
8402 20 | Superheated water boilers |
8404 10 | Auxiliary plant for use with boilers of heading 8402 or 8403 , e.g. economizers, superheaters, soot removers and gas recoverers; |
8404 20 | Condensers for steam or other vapour power units |
8404 90 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers - Parts |
8405 90 | parts of producer gas or water gas generators and acetylene gas generators or similar water process gas generators, n.e.s. |
8406 90 | Steam turbines and other vapour turbines - Parts |
8412 10 | Reaction engines other than turbojets |
8412 21 | Engines and motors - linear acting (cylinders) |
8412 29 | Hydraulic power engines and motors - Other |
8412 39 | Pneumatic power engines and motors - Other |
8415 83 | Other air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated - not incorporating a refrigerating unit |
8416 10 | furnace burners for liquid fuel |
8416 20 | Furnace burners for pulverised solid fuel or gas, incl. combination burners |
8416 30 | Mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances (excl. burners) |
8416 90 | Parts of furnace burners such as mechanical stokers, incl. their mechanical grates, mechanical ash dischargers and similar appliances |
8417 20 | Bakery ovens, incl. biscuit ovens, non-electric |
8419 19 | instantaneous or storage water heaters, non-electric (excl. instantaneous gas water heaters and boilers or water heaters for central heating) |
8420 99 | Parts of calendering or other rolling machines, other than for metals or glass, and cylinders therefor - Other |
8421 19 | Centrifuges, including centrifugal dryers - other |
8421 91 | Parts of centrifuges, incl. centrifugal dryers |
8424 89 | Other appliances - Other |
8424 90 | Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines - Parts |
8425 11 | Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles powered by electric motor |
8426 12 | Mobile lifting frames on tyres and straddle carriers |
8426 99 | Ships’ derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane - Other |
8428 20 | Pneumatic elevators and conveyors |
8428 32 | Other continuous-action elevators and conveyors, for goods or materials - Other, bucket type |
8428 33 | Other continuous-action elevators and conveyors, for goods or materials - Other, belt type |
8428 90 | Other machinery |
8429 19 | Bulldozers and angledozers - Other |
8429 59 | Mechanical shovels, excavators and shovel loaders - Other |
8439 10 | Machinery for making pulp of fibrous cellulosic material |
8439 30 | Machinery for finishing paper or paperboard |
8440 90 | Bookbinding machinery, including book-sewing machines - Parts |
8441 30 | Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding |
8442 40 | Parts of the foregoing machinery, apparatus or equipment |
8443 13 | Other offset printing machinery |
8443 15 | Letterpress printing machinery, other than reel fed, excluding flexographic printing |
8443 16 | Flexographic printing machinery |
8443 17 | Gravure printing machinery |
8443 91 | Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 |
8444 00 | Machines for extruding, drawing, texturing or cutting man-made textile materials |
8448 11 | Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith |
8448 19 | Auxiliary machinery for machines of heading 8444 , 8445 , 8446 or 8447 - Other |
8448 33 | Spindles, spindle flyers, spinning rings and ring travellers |
8448 42 | Reeds for looms, healds and heald-frames |
8448 49 | Parts and accessories of weaving machines (looms) or of their auxiliary machinery - Other |
8448 51 | Sinkers, needles and other articles used in forming stitches |
8451 10 | Dry-cleaning machines |
8451 29 | Drying machines - Other |
8451 30 | Ironing machines and presses (including fusing presses) |
8451 90 | Machinery (other than machines of heading 8450 ) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics - Parts |
8453 10 | Machinery for preparing, tanning or working hides, skins or leather |
8453 80 | Other machinery |
8453 90 | Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines - Parts |
8454 10 | Converters |
8459 10 | Way-type unit head machines |
8459 70 | Other threading or tapping machines |
8461 20 | Shaping or slotting machines, for working metals, metal carbides or cermets |
8461 30 | Broaching machines, for working metals, metal carbides or cermets |
8461 40 | Gear-cutting, gear-grinding or gear-finishing machines |
8461 90 | Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included - Other |
8466 10 | Tool holders and self-opening dieheads |
8466 92 | Other parts and accessories suitable for use solely or principally with the machines of headings 8456 to 8465 , including work or tool holders, self- opening dieheads, dividing heads and other special attachments for the machines; tool holders for any type of tool for working in the hand - For machines of heading 8464 |
8472 10 | Duplicating machines |
8472 30 | Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps |
8473 21 | Parts and accessories of the electronic calculating machines of subheading 8470 10 , 8470 21 or 8470 29 |
8474 10 | Sorting, screening, separating or washing machines |
8474 39 | Mixing or kneading machines - Other |
8474 80 | Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand - Other machinery |
8475 21 | Machines for making optical fibres and preforms thereof |
8475 29 | Machines for manufacturing or hot working glass or glassware - Other |
8475 90 | Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware - Parts |
8479 10 | Machinery for public works, building or the like |
8479 30 | Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork |
8479 50 | Industrial robots, not elsewhere specified or included |
8479 90 | Machines and mechanical appliances having individual functions, not specified or included elsewhere in Chapter 84 - Parts |
8480 20 | Mould bases |
8480 30 | Moulding patterns |
8480 60 | Moulds for mineral materials |
8481 10 | Pressure-reducing valves |
8481 20 | Valves for oleohydraulic or pneumatic transmissions |
8481 40 | Safety or relief valves |
8482 40 | Tapered roller bearings, including cone and tapered roller assemblies |
8482 91 | Balls, needles and rollers |
8484 20 | Mechanical seals |
8501 33 | Other DC motors; DC generators, other than photovoltaic generators - of an output exceeding 75 kW but not exceeding 375 kW |
8501 62 | AC generators (alternators), other than photovoltaic generators of an output exceeding 75 kVA but not exceeding 375 kVA |
8501 63 | AC generators (alternators), other than photovoltaic generators of an output exceeding 375 kVA but not exceeding 750 kVA |
8501 64 | AC generators (alternators), other than photovoltaic generators of an output exceeding 750 kVA |
8502 31 | Generating sets, wind-powered |
8502 39 | Other generating sets - Other |
8502 40 | Electric rotary converters |
8504 33 | Transformers having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA |
8504 34 | Transformers having a power handling capacity exceeding 500 kVA |
8505 20 | Electromagnetic couplings, clutches and brakes |
8506 90 | Primary cells and primary batteries - Parts |
8507 30 | Electric accumulators, including separators therefor, whether or not rectangular (including square) - Nickel-cadmium |
8514 31 | Electron beam furnaces |
8530 90 | Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading 8608 ) - Parts |
8532 10 | Fixed capacitors designed for use in 50/60 hz circuits and having a reactive power-handling capacity of >= 0,5 kvar ‘power capacitors’ |
8533 29 | Other fixed resistors - Other |
8535 30 | Isolating switches and make-and-break switches |
8535 90 | Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes), for a voltage exceeding 1 000 V - Other |
8539 41 | Arc lamps |
8540 20 | Television camera tubes; image converters and intensifiers; other photocathode tubes |
8540 60 | Other cathode ray tubes |
8540 79 | Microwave tubes (for example, magnetrons, klystrons, travelling-wave tubes, carcinotrons), excluding grid-controlled tubes - Other |
8540 81 | Receiver or amplifier valves and tubes |
8540 89 | Other valves and tubes - Other |
8540 91 | Parts of cathode ray tubes |
8547 90 | Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading 8546 ; electrical conduit tubing and joints therefor, of base metal lined with insulating material - Other |
8602 90 | Rail locomotives powered by electric accumulators |
8604 00 | Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles) |
8606 92 | Other railway or tramway goods vans and wagons, not self-propelled - Open, with non-removable sides of a height exceeding 60 cm |
8701 21 | Road tractors for semi-trailers - With only compression-ignition internal combustion piston engine (diesel or semi-diesel) |
8701 22 | Road tractors for semi-trailers - With both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion |
8701 23 | Road tractors for semi-trailers - With both spark-ignition internal combustion piston engine and electric motor as motors for propulsion |
8701 24 | Road tractors for semi-trailers - With only electric motor for propulsion |
8704 10 | Dumpers designed for off-highway use |
8704 22 | Other motor vehicles for the transport of goods - of a gross vehicle weight exceeding 5 tonnes but not exceeding 20 tonnes: |
8704 32 | Other motor vehicles for the transport of goods - of a gross vehicle weight exceeding 5 tonnes |
8705 90 | Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units) - Other |
8716 39 | Other trailers and semi-trailers for the transport of goods - Other |
9010 10 | Apparatus and equipment for automatically developing photographic (including cinematographic) film or paper in rolls or for automatically exposing developed film to rolls of photographic paper |
9015 40 | Photogrammetrical surveying instruments and appliances |
9015 80 | Other instruments and appliances |
9015 90 | Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders - Parts and accessories |
9029 10 | Revolution counters, production counters, taximeters, milometers, pedometers and the like |
9401 10 | Seats for aircraft |
9401 20 | Seats for motor vehicles |
9403 30 | Wooden furniture of a kind used in offices |
9406 10 | Prefabricated buildings of wood |
9406 90 | Prefabricated buildings, whether or not complete or already assembled - Other |
9606 30 | Button moulds and other parts of buttons; button blanks |
9608 91 | Pen nibs and nib points |
9612 20 | Ink-pads, whether or not inked, with or without boxes |
9005 10 00 | Binoculars |
9015 10 00 | Range Finders |
85407100 | Magnetrons |
85066000 | Air-zinc cells and batteries (excl. spent) |
8442 3000 | Machinery, apparatus and equipment for preparing or making printing plates, cylinders or other printing components (excl. machines of headings 8456 to 8465) |
8427 2011 | Rough terrain fork-lift and other stacking trucks, self-propelled, with a lifting height >= 1 m |
8427 2019 | Works trucks, self-propelled, with a lifting height >= 1 m, non- powered with an electric motor (excl. rough terrain fork-lift trucks and other stacking trucks) |
8427 2090 | Works trucks, self-propelled, with a lifting height < 1 m, non-powered with an electric motor |
8502 1320 | Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 375 kVA but <= 750 kVA |
8502 1340 | Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 750 kVA but <= 2.000 kVA |
8502 1380 | Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 2.000 kVA |
8601 1000 | Rail locomotives powered from an external source of electricity |
8418 6100 | Heat pumps (excl. air conditioning machines of heading 8415) |
8516 2100 | Electric storage heating radiators, for space-heating |
8443 1100 | Offset printing machinery, reel fed |
8461 5011 | Circular saws for working metals, metal carbides or cermets (excl. machines for working in the hand) |
8461 5019 | Sawing machines for working metals, metal carbides or cermets (excl. machines for working in the hand and circular saws) |
8461 5090 | Cutting-off machines for working metals, metal carbides or cermets (excl. machines for working in the hand and sawing machines) |
Textual Amendments
3. Any thing falling within a commodity code mentioned in column 1 of the following table.U.K.
(1) Commodity code | (2) Name of the good |
---|---|
2828 90 | Hypochlorites; commercial calcium hypochlorite; chlorites; hypobromites - Other |
2834 10 | Nitrites |
2901 29 | Acyclic hydrocarbons - Unsaturated - Other |
2903 11 | Chloromethane (methyl chloride) and chloroethane (ethyl chloride) |
2904 20 | Derivatives containing only nitro or only nitroso groups |
2905 13 | Butan-1-ol (n-butyl alcohol) |
2908 11 | Pentachlorophenol (ISO) |
2910 10 | Oxirane (ethylene oxide) |
3204 90 | Synthetic organic colouring matter, whether or not chemically defined; preparations as specified in note 3 to this Chapter based on synthetic organic colouring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined |
3205 00 | colour lakes (other than Chinese or Japanese lacquer and paints); preparations based on colour lakes of a kind used to dye fabrics or produce colorant preparations (excluding preparations of heading 3207, 3208, 3209, 3210, 3213 and 3215) |
3206 41 | ultramarine and preparations based thereon of a kind used for colouring any material or produce colorant preparations (excluding preparations of heading 3207, 3208, 3209, 3210, 3213 and 3215) |
3207 10 | Prepared pigments, prepared opacifiers, prepared colours and similar preparations |
3207 30 | Liquid lustres and similar preparations |
3215 11 | Printing ink - Black |
3215 19 | Printing ink - Other |
3819 00 | hydraulic brake fluids and other prepared liquids for hydraulic transmission not containing petroleum oil or bituminous mineral oil, or containing < 70 % petroleum oil or bituminous mineral oil by weight |
3824 81 | mixtures and preparations containing oxirane ‘ethylene oxide’ |
3824 84 | mixtures and preparations containing aldrin (ISO), camphechlor (ISO) (toxaphene), chlordane (ISO), chlordecone (ISO), DDT (ISO) (clofenotane (INN), 1,1,1-trichloro-2,2-bis (p-chlorophenyl) ethane), dieldrin (ISO, INN), endosulfan (ISO), endrin (ISO), heptachlor (ISO) or mirex (ISO) |
3909 40 | phenolic resins, in primary forms |
4906 00 | plans and drawings for architectural, engineering, industrial, commercial, topographical or similar purposes, being originals drawn by hand; handwritten texts; photographic reproductions on sensitised paper and carbon copies of the foregoing |
7219 24 | flat-rolled products of stainless steel, of a width of >= 600 mm, not further worked than hot-rolled, not in coils, of a thickness of < 3 mm |
7305 39 | tubes and pipes having circular cross-sections and an external diameter of > 406.4 mm, of iron or steel, welded (excluding products longitudinally welded or of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) |
7411 29 | tubes and pipes of copper alloys (excluding copper-zinc base alloys ‘brass’, copper-nickel base alloys ‘cupro-nickel’ and copper-nickel-zinc base alloys ‘nickel silver’) |
7508 90 | articles of nickel |
7613 00 | Aluminium containers for compressed or liquefied gas |
8307 10 | flexible tubing of iron or steel, with or without fittings |
8414 90 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters – Parts |
8430 10 | Piledrivers and pile extractors |
8430 39 | Coal or rock cutters and tunnelling machinery – Other |
8465 20 | Machining centres |
8465 93 | Grinding, sanding or polishing machines |
8465 94 | Bending or assembling machines |
8477 40 | Vacuum-moulding machines and other thermoforming machines |
8477 51 | Other machinery for moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes |
8482 99 | Other parts |
8484 10 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal |
8484 90 | Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals – Other |
8540 99 | Other parts |
8701 30 | Track-laying tractors (excluding pedestrian-controlled) |
8705 20 | Mobile drilling derricks |
8705 30 | Fire fighting vehicles |
8709 90 | Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles – Parts |
8716 20 | Self-loading or self-unloading trailers and semi-trailers for agricultural purposes |
9031 20 | Test benches |
9032 81 | Other automatic regulating or controlling instruments and apparatus - Hydraulic or pneumatic] |
Regulation 21
1. Paragraph 1 of Schedule 3 applies for the purposes of interpreting Part 2.
2. Any thing falling within a commodity code mentioned in column 1 of the following table.U.K.
(1) Commodity code | (2) Description |
---|---|
2709 | Petroleum oils and oils obtained from bituminous minerals, crude. |
2710 | Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70% or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils. |
[F44ex 2711] | Petroleum gases and other gaseous hydrocarbons, excluding [F45anything falling within commodity code 2711 11] |
2712 | Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured. |
2713 | Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals. |
2714 | Bitumen and asphalt, natural; bituminous or oil-shale and tar sands; asphaltites and asphaltic rocks. |
2715 | Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs). |
2207 | Undenatured ethyl alcohol of an alcoholic strength by volume of 80%vol or higher; ethyl alcohol and other spirits, denatured, of any strength |
3826 | Biodiesel oil and mixtures thereof, not containing or containing less than 70% by weight of petroleum oils or oils obtained from bituminous minerals |
Textual Amendments
F44Words in Sch. 3F Pt. 2 Table substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), reg. 1(2)(b), Sch. 3 para. 9(a)
F45Words in Sch. 3F Pt. 2 Table substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), reg. 1(2)(b), Sch. 3 para. 9(b)
Regulation 21
1. Paragraph 1 of Schedule 3 applies for the purposes of interpreting [F46Parts 2 and 3].
Textual Amendments
F46Words in Sch. 3G para. 1 substituted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), regs. 1(2)(b), 11(9)(a)
2. Any thing falling within a commodity code mentioned in column 1 of the following table.U.K.
(1) Commodity Code | (2) Description |
7108 | Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form |
71129 10000 | Waste and scrap of gold, including metal clad with gold but excluding sweepings containing other precious metals. |
3. Any thing falling—U.K.
(a)within a commodity code mentioned in column 1 of the following table; and
(b)within the description in column 2 beside that code.
(1) Commodity Code | (2) Description |
---|---|
ex 7118 9000 | Gold coin |
Textual Amendments
4. Any thing falling—U.K.
(a)within a commodity code mentioned in column 1 of the following table; and
(b)within the description in column 2 beside that code.
(1) Commodity code | (2) Description |
---|---|
Ex 7113 | Articles of jewellery and parts thereof, of gold, containing gold or of metal clad with gold |
Ex 7114 | Articles of goldsmiths’ or silversmiths’ wares and parts thereof, of gold, containing gold or of metal clad with gold] |
Regulation 21
1. Paragraph 1 of Schedule 3 applies for the purposes of interpreting Part 2.
2. Any thing falling within a commodity code mentioned in column 1 of the following table.U.K.
(1) Commodity code | (2) Description |
---|---|
2701 | Coal; briquettes, ovoids and similar solid fuels manufactured from coal |
2702 | Lignite, whether or not agglomerated, excluding jet |
2703 | Peat (including peat litter), whether or not agglomerated |
2704 | Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon |
2705 | Coal gas, water gas, producer gas and similar gases, other than petroleum gases and other gaseous hydrocarbons |
2706 | Tar distilled from coal, from lignite or from peat, and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars |
2707 | Oils and other products of the distillation of high temperature coal tar; similar products in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents |
2708 | Pitch and pitch coke, obtained from coal tar or from other mineral tars] |
Regulation 21(1)
Textual Amendments
F48Sch. 3I inserted (29.10.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 15) Regulations 2022 (S.I. 2022/1110), reg. 1(2)(b), Sch. 2
1. Paragraph 1 of Schedule 3 applies for the purposes of interpreting this Schedule.U.K.
2. In this Schedule, “n.e.s” means “not elsewhere specified”.U.K.
(1) Commodity code | (2) Description |
---|---|
44012100 | Coniferous wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes) |
44012210 | Wood in chips or particles, of eucalyptus |
44012290 | Wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes, coniferous wood and eucalyptus) |
44031100 | Wood in the rough, treated with paint, stains, creosote or other preservatives, coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.) |
44031200 | Wood in the rough, treated with paint, stains, creosote or other preservatives, non-coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.) |
44032110 | Sawlogs of pine “Pinus spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared |
44032190 | Pine “Pinus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44032200 | Pine “Pinus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44032310 | Sawlogs of fir “Abies spp.” and spruce “Picea spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared |
44032390 | Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44032400 | Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44032510 | Sawlogs, coniferous, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44032590 | Coniferous wood in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce; sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44032600 | Coniferous wood in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce, and rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44034100 | Dark red meranti, light red meranti and meranti bakau wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44034910 | Sapelli, acajou d’Afrique and iroko in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44034935 | Okoumé and sipo in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44034985 | Tropical wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding acajou d’Afrique, iroko, sapelli, okoumé and sipo; rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039100 | Oak “Quercus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039300 | Beech “Fagus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039400 | Beech “Fagus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039510 | Sawlogs of birch “Betula spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared |
44039590 | Birch “Betula spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039600 | Birch “Betula spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039700 | Poplar and aspen “Populus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039800 | Eucalyptus “Eucalyptus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives) |
44039900 | Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives, coniferous and tropical wood, oak, beech, birch, poplar, aspen and eucalyptus) |
44083111 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, end-jointed, whether or not planed or sanded, of dark red meranti, light red meranti and meranti bakau |
44083121 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of dark red meranti, light red meranti and meranti bakau (excluding end-jointed) |
44083125 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, of dark red meranti, light red meranti and meranti bakau (excluding end-jointed) |
44083130 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, whether or not spliced, of dark red meranti, light red meranti and meranti bakau (excluding planed, sanded or end-jointed) |
44083915 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, or end-jointed, whether or not planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose |
44083921 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding end-jointed) |
44083930 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 6 mm, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding planed, sanded or end-jointed) |
44083955 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose) |
44083970 | Small boards for the manufacture of pencils, of a thickness of <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose) |
44083985 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end-jointed) |
44083995 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm but <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end-jointed) |
44089015 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed (excluding tropical and coniferous wood) |
44089035 | Small boards for the manufacture of pencils, of wood, of a thickness of <= 6 mm (excluding tropical and coniferous wood) |
44089085 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood) |
44089095 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood) |
68042212 | Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of synthetic or artificial resin, not reinforced (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) |
68042218 | Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of synthetic or artificial resin, reinforced (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) |
68042230 | Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of ceramics or silicates (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) |
68042250 | Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of other than of synthetic or artificial resin, ceramics or silicates (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) |
68042290 | Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of agglomerated natural abrasives or ceramics (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines) |
73110011 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity < 20 l (excluding containers specifically constructed or equipped for one or more types of transport) |
73110013 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity >= 20 l to <= 50 l (excluding containers specifically constructed or equipped for one or more types of transport) |
73110019 | Containers of iron or steel, seamless, for compressed or liquefied gas, for a pressure >= 165 bar, of a capacity > 50 l (excluding containers specifically constructed or equipped for one or more types of transport) |
82051000 | Hand-operated drilling, threading or tapping hand tools |
82052000 | Hammers and sledge hammers with working parts of base metal |
82053000 | Planes, chisels, gouges and similar cutting tools for working wood |
82054000 | Hand-operated screwdrivers |
82055100 | Household hand tools, non-mechanical, with working parts of base metal, n.e.s. |
82055910 | Hand tools for masons, moulders, cement workers, plasterers and painters, of base metal, n.e.s. |
82055980 | Hand tools, including glaziers’ diamonds, of base metal, n.e.s. |
82056000 | Blowlamps and the like (excluding gas-powered blowlamps) |
82057000 | Vices, clamps and the like (excluding accessories for and parts of machine tools or water-jet cutting machines) |
82059010 | Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks |
82059090 | Sets of articles of two or more subheadings of heading 8205 |
82071990 | Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamond |
82072010 | Interchangeable dies for drawing or extruding metal, with working parts of diamond or agglomerated diamond |
82072090 | Interchangeable dies for drawing or extruding metal, with working parts of materials other than diamond or agglomerated diamond |
82073010 | Interchangeable tools for pressing, stamping or punching, for working metal |
82073090 | Interchangeable tools for pressing, stamping or punching, for working materials other than metal |
82074010 | Tools for tapping metal, interchangeable |
82074030 | Tools for threading metal, interchangeable |
82074090 | Tools for tapping or threading materials other than metal, interchangeable |
82075010 | Tools for drilling, interchangeable, with working parts of diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring and tools for tapping) |
82075030 | Interchangeable masonry drills, with working parts of materials other than diamond or agglomerated diamond |
82075050 | Tools for drilling metal, interchangeable, with working parts of sintered metal carbide or cermets (excluding tools for tapping) |
82075060 | Tools for drilling, interchangeable, for working metal, with working parts of high speed steel (excluding tools for tapping) |
82075070 | Tools for drilling metal, interchangeable, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide, cermets or high speed steel (excluding tools for tapping) |
82075090 | Tools for drilling, interchangeable, for working materials other than metal, with working parts of materials other than diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring, wall boring and tools for tapping) |
82077031 | Interchangeable shank type tools for milling metal, with working parts of materials other than sintered metal carbide or cermets |
82077037 | Tools for milling, interchangeable, for working metal, with working part of materials other than sintered metal carbide or cermets (excluding shank-type) |
82079030 | Screwdriver bits of base metal |
82079050 | Interchangeable gear-cutting tools (excluding milling tools for gear-cutting) |
82079071 | Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, for working metal, with working parts of sintered metal carbide or cermets, n.e.s. |
82079078 | Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances or in machine tools, for working materials other than metal, with working part of sintered metal carbides or cermets, n.e.s. |
82079091 | Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or for machine tools, for working metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s. |
82090020 | Inserts, indexable, for tools, unmounted, of sintered metal carbide or cermets |
82090080 | Plates, sticks, tips and the like for tools, unmounted, of sintered metal carbides or cermets (excluding indexable inserts) |
84021100 | Watertube boilers with a steam production > 45 t/hour |
84051000 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers (excluding coke ovens, electrolytic process gas generators and carbide lamps) |
84061000 | Steam and other vapour turbines for marine propulsion |
84068100 | Steam and other vapour turbines, of an output > 40 MW (excluding those for marine propulsion) |
84068200 | Steam and other vapour turbines, of an output <= 40 MW (excluding those for marine propulsion) |
84101100 | Hydraulic turbines and water wheels, of a power <= 1,000 kW (excluding hydraulic power engines and motors of heading 8412) |
84101200 | Hydraulic turbines and water wheels, of a power > 1,000 kW but <= 10.000 kW (excluding hydraulic power engines and motors of heading 8412) |
84101300 | Hydraulic turbines and water wheels, of a power > 10,000 kW (excluding hydraulic power engines and motors of heading 8412) |
84109000 | Parts of hydraulic turbines and water wheels including regulators |
84123100 | Pneumatic power engines and motors, linear-acting, “cylinders” |
84128010 | Steam or other vapour power engines (excluding steam or other vapour generating boilers and turbines) |
84128080 | Engines and motors, non-electrical (excluding steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, reaction engines, hydraulic power engines and motors, pneumatic power engines and motors, steam or other vapour power engines and electric motors) |
84129020 | Parts of reaction engines, n.e.s. (excluding of turbojets) |
84129040 | Parts of hydraulic power engines and motors, n.e.s. |
84129080 | Parts of other engines and motors, n.e.s. |
84152000 | Air conditioning machines of a kind used for persons, in motor vehicles |
84158100 | Air conditioning machines incorporating a refrigerating unit and a valve for reversal of the cooling-heat cycle “reversible heat pumps” (excluding of a kind used for persons in motor vehicles and self-contained or “split-system” window or wall air conditioning machines) |
84158200 | Air conditioning machines incorporating a refrigerating unit but without a valve for reversal of the cooling-heat cycle (excluding of a kind used for persons in motor vehicles, and self-contained or “split-system” window or wall air conditioning machines) |
84159000 | Parts of air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, n.e.s. |
84178050 | Ovens and furnaces for firing cement, glass or chemical products |
84179000 | Parts of industrial or laboratory furnaces, non-electric, including incinerators, n.e.s. |
84185011 | Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for frozen food storage |
84185019 | Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for non-frozen food storage |
84185090 | Refrigerating furniture with a refrigerating unit or evaporator (excluding combined refrigerator-freezers, with separate external doors, household refrigerators, refrigerated show-cases and counters) |
84189100 | Furniture designed to receive refrigerating or freezing equipment |
84189910 | Evaporators and condensers for refrigerating equipment (excluding for household refrigerators) |
84189990 | Parts of refrigerating or freezing equipment and heat pumps, n.e.s. |
84191100 | Instantaneous gas water heaters (excluding boilers or water heaters for central heating) |
84193300 | Dryers -Lyophilisation apparatus, freeze drying units and spray dryers |
84193500 | Other dryers, for wood, paper pulp, paper or paperboard |
84193900 | Dryers n.e.s. |
84199085 | Parts of machinery, plant and laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, and of non-electric instantaneous and storage water heaters, n.e.s. (excluding of medical, surgical or laboratory sterilizers, those for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays, and of furnaces, ovens and other equipment of heading 8514) |
84201010 | Calendering or other rolling machines, of a kind used in the textile industry |
84201030 | Calendering or other rolling machines, of a kind used in the paper industry |
84201081 | Roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits |
84201089 | Calendering or other rolling machines (excluding of a kind used in the textile or paper industries or for metals or glass, and roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits) |
84209110 | Cylinders for calendering or other rolling machines, of cast iron (other than for metals or glass) |
84209180 | Cylinders for calendering or other rolling machines (excluding of cast iron and those for metals or glass) |
84212300 | Oil or petrol-filters for internal combustion engines |
84212920 | Machinery and apparatus for filtering or purifying liquids, made of fluoropolymers and with filter or purifier membrane thickness <= 140 μm (excluding those for water and other beverages, and artificial kidneys) |
84212980 | Machinery and apparatus for filtering or purifying liquids (excluding such machinery and apparatus for water and other beverages, oil or petrol filters for internal combustion engines, artificial kidneys, and those made of fluoropolymers with filter or purifier membrane thickness <= 140 μm) |
84213100 | Intake air filters for internal combustion engines |
84219910 | Parts of machinery and apparatus of subheadings 84212920 or 84213915, n.e.s. |
84219990 | Parts of machinery and apparatus for filtering or purifying liquids or gases, n.e.s. |
84229090 | Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excluding parts of dishwashing machines) |
84232010 | Scales for continuous weighing of goods on conveyors, using electronic means for gauging weight |
84232090 | Scales for continuous weighing of goods on conveyors, using non-electronic means for gauging weight |
84233010 | Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales, using electronic means for gauging weight |
84233090 | Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales, using non-electronic means for gauging weight |
84238121 | Check weighers and automatic control machines operating by reference to a pre-determined weight, having weighing capacity <= 30 kg, using electronic means for gauging weight |
84238123 | Machinery for weighing and labelling pre-packaged goods, having weighing capacity <= 30 kg, using electronic means for gauging weight |
84238125 | Shop scales, having weighing capacity <= 30 kg, using electronic means for gauging weight (excluding machinery for weighing and labelling pre-packaged goods) |
84238129 | Weighing machinery having a maximum weighing capacity <= 30 kg, using electronic means for gauging weight, n.e.s |
84238180 | Weighing machinery having a maximum weighing capacity <= 30 kg, using non-electronic means for gauging weight, n.e.s |
84238220 | Weighing machinery of a maximum weighing capacity > 30 kg but <= 5,000 kg, using electronic means for gauging weight (excluding machines for weighing motor vehicles, personal weighing machines, scales for continuous weighing of goods on conveyors, constant weight scales and scales for discharging a pre-determined weight of material into a bag or container, also hopper scales) |
84238281 | Check weighers and automatic control machines operating by reference to a pre-determined weight, of a maximum weighing capacity > 30 kg but <= 5,000 kg, using non-electronic means for gauging weight |
84238289 | Weighing machinery of a maximum weighing capacity > 30 kg but <= 5,000 kg, n.e.s. |
84238920 | Weighing machinery of a maximum weighing capacity > 5,000 kg, using electronic means for gauging weight |
84238980 | Weighing machinery of a maximum weighing capacity > 5,000 kg, using non-electronic means for gauging weight |
84239010 | Parts of weighing machinery of subheadings 84232010, 84233010, 84238121, 84238123, 84238125, 84238129, 84238220 or 84238920, n.e.s. |
84239090 | Weighing machine weights of all kinds; parts of weighing machinery, n.e.s. |
84242000 | Spray guns and similar appliances (other than electrical machines, appliances and other devices for spraying molten metals or metal carbides of heading 8515, sand blasting machines and similar jet projecting machines) |
84243001 | Water cleaning appliances with built-in motor, with heating device |
84243008 | Water cleaning appliances with built-in motor, without heating device |
84243010 | Steam or sand blasting machines and similar jet projecting machines, compressed air operated |
84243090 | Steam or sand blasting machines and similar jet projecting machines (excluding compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers) |
84251900 | Pulley tackle and hoists (other than skip hoists or hoists of a kind used for raising vehicles), non-powered by electric motor |
84253100 | Winches and capstans powered by electric motor |
84253900 | Winches and capstans, non-powered by electric motor |
84254100 | Built-in jacking systems of a type used in garages |
84254200 | Jacks and hoists, hydraulic (excluding built-in jacking systems used in garages) |
84254900 | Jacks and hoists of a kind used for raising vehicles, not hydraulic |
84261100 | Overhead travelling cranes on fixed support |
84261900 | Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes and mobile lifting frames (excluding overhead travelling cranes on fixed support, mobile lifting frames on tyres, straddle carriers and portal or pedestal jib cranes) |
84262000 | Tower cranes |
84263000 | Portal or pedestal jib cranes |
84264100 | Mobile cranes and works trucks fitted with a crane, self-propelled, on tyres (excluding wheel-mounted cranes, mobile lifting frames on tyres and straddle carriers) |
84264900 | Mobile cranes and works trucks fitted with a crane, self-propelled (excluding those on tyres and straddle carriers) |
84269110 | Hydraulic cranes designed for the loading and unloading of the vehicle |
84269190 | Cranes designed for mounting on road vehicles (excluding hydraulic cranes designed for the loading and unloading of vehicles) |
84271010 | Self-propelled works trucks powered by an electric motor, with a lifting height >= 1 m |
84271090 | Self-propelled works trucks powered by an electric motor, with a lifting height < 1 m |
84279000 | Works trucks fitted with lifting or handling equipment, not self-propelled |
84281020 | Lifts and skip hoists, electrically operated |
84281080 | Lifts and skip hoists, non-electrically operated |
84283100 | Continuous-action elevators and conveyors for goods or materials, for underground use (excluding pneumatic elevators and conveyors) |
84283920 | Roller conveyors |
84283990 | Continuous-action conveyors for goods or materials (excluding specially designed for underground use, continuous-action conveyors with buckets or belts, wheel conveyors and other roller conveyors, pneumatic continuous-action conveyors and automated material handling machines for transport, handling and storage of material for semiconductor devices) |
84284000 | Escalators and moving walkways |
84291100 | Self-propelled bulldozers and angledozers, track laying |
84292000 | Self-propelled graders and levellers |
84293000 | Self-propelled scrapers |
84294010 | Self-propelled roadrollers, vibratory |
84294030 | Self-propelled roadrollers (other than vibratory) |
84294090 | Self-propelled tamping machines (excluding roadrollers) |
84295110 | Self-propelled front-end shovel loaders specially designed for underground use |
84295191 | Self-propelled front-end crawler shovel loaders (other than specially designed for underground use) |
84295199 | Self-propelled front-end shovel loaders (other than specially designed for underground use or crawler shovel loaders) |
84295210 | Self-propelled track-laying excavators, with a 360° revolving superstructure |
84295290 | Self-propelling mechanical shovels with a 360° revolving superstructure (other than on track-laying excavators) |
84302000 | Snowploughs and snowblowers (excluding those mounted on railway wagons, motor vehicle chassis or lorries) |
84306100 | Tamping or compacting machinery, not self-propelled (excluding hand-operated tools) |
84311000 | Parts of pulley tackles and hoists (other than skip hoists), winches, capstans and jacks, n.e.s. |
84312000 | Parts of fork-lift trucks and other works trucks fitted with lifting or handling equipment, n.e.s. |
84313100 | Parts of lifts, skip hoists or escalators, n.e.s. |
84314100 | Buckets, shovels, grabs and grips for machinery of heading 8426, 8429 and 8430 |
84314200 | Bulldozer or angledozer blades, n.e.s. |
84331110 | Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a horizontal plane |
84331151 | Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, with a seat |
84331159 | Self-propelled mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane, without a seat |
84331190 | Mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a horizontal plane not self-propelled |
84331910 | Electric motor mowers for lawns, parks or sports grounds, with the cutting device rotating in a vertical plane or with cutter bars |
84331951 | Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, with a seat |
84331959 | Self-propelled motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, without a seat |
84331970 | Motor mowers for lawns, parks or sports grounds, powered non-electrically, with the cutting device rotating in a vertical plane or with cutter bars, not self-propelled |
84331990 | Mowers for lawns, parks or sports grounds, without motor |
84332010 | Motor mowers (excluding mowers for lawns, parks or sports grounds) |
84332090 | Mowers (excluding mowers designed to be carried on or hauled by a tractor, mowers for lawns, parks or sports grounds, motor mowers and combine harvester-threshers) |
84392000 | Machinery for making paper or paperboard |
84399100 | Parts of machinery for making pulp of fibrous cellulosic material, n.e.s. |
84399900 | Parts of machinery for making or finishing paper or paperboard, n.e.s. |
84401010 | Folding machines for bookbinding |
84401020 | Collating machines and gathering machines for bookbinding |
84401030 | Sewing, wire stitching and stapling machines, including book-sewing machines, for bookbinding |
84401040 | Unsewn “perfect” binding machines |
84401090 | Bookbinding machinery (excluding machinery of heading 8441, general-purpose presses, printing machinery of heading 8443 and machines of uses ancillary to printing, folding machines, collating machines, gathering machines, sewing, wire stitching and stapling machines and unsewn binding machines) |
84411010 | Combined reel slitting and re-reeling machines, for making up paper pulp, paper or paperboard |
84411020 | Slitting and cross cutting machines, for making up paper pulp, paper or paperboard (excluding combined reel slitting and re-reeling machines) |
84411030 | Guillotines for paper or paperboard |
84411070 | Cutting machines for paper or paperboard (other than bookbinding machinery of heading 8440, combined reel slitting and re-reeling machines, other slitting and cross-cutting machines and guillotines) |
84412000 | Machines for making bags, sacks or envelopes out of paper pulp, paper or paperboard (excluding sewing machines and eyeletting machines) |
84414000 | Machines for moulding articles in paper pulp, paper or paperboard (excluding drying equipment) |
84418000 | Machinery for making up paper pulp, paper or paperboard, n.e.s. |
84419010 | Parts of cutting machines for making up paper pulp, paper or paperboard, n.e.s. |
84419090 | Parts of machinery for making up paper pulp, paper or paperboard, n.e.s. |
84425000 | Printing plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes, e.g. planed, grained or polished |
84431400 | Letterpress printing machinery, reel fed (excluding flexographic printing machinery) |
84431920 | Printing machinery for printing textile materials (excluding offset, flexographic, letterpress and gravure printing machinery) |
84431940 | Printing machinery for use in the production of semiconductors |
84431970 | Printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442 (excluding machinery for printing textile materials, those for use in the production of semiconductors, ink jet printing machines, hectograph or stencil duplicating machines, addressing machines and other office printing machines of heading 8469 to 8472 and offset, flexographic, letterpress and gravure printing machinery) |
84439910 | Electronic assemblies of printers, copying machines and facsimile machines (excluding of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442) |
84439990 | Parts and accessories of printers, copying machines and facsimile machines, n.e.s. (excluding electronic assemblies and of printing machinery used for printing by means of plates, cylinders and other printing components of heading 8442) |
84451100 | Carding machines for preparing textile fibres |
84451200 | Combing machines for preparing textile fibres |
84451300 | Drawing or roving machines |
84451900 | Machines for preparing textile fibres (excluding carding, combing, drawing or roving machines) |
84452000 | Textile spinning machines (excluding extruding and drawing or roving machines) |
84453000 | Textile doubling or twisting machines |
84454000 | Textile winding, including weft-winding, or reeling machines |
84459000 | Machines for producing textile yarns and machines for preparing textile yarns for use on machines of heading 8446 or 8447 (excluding machines of heading 8444 and spinning, doubling or twisting machines) |
84461000 | Weaving machines for weaving fabrics of a width <= 30 cm |
84462100 | Power looms for weaving fabrics of a width > 30 cm, shuttle type |
84462900 | Hand looms for weaving fabrics of a width > 30 cm, shuttle type |
84463000 | Weaving machines for weaving fabrics of a width > 30 cm, shuttleless type |
84471100 | Circular knitting machines, with cylinder diameter <= 165 mm |
84471200 | Circular knitting machines, with cylinder diameter > 165 mm |
84472020 | Warp knitting machines, including Raschel type, and stitch-bonding machines |
84472080 | Flat knitting machines (excluding warp knitting machines, including Raschel type) |
84479000 | Machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting (excluding chain or blanket stitch machines) |
84482000 | Parts and accessories of machines for extruding, drawing, texturing or cutting man-made textile materials or of their auxiliary machinery, n.e.s. |
84483100 | Card clothing for machines for preparing textile fibres |
84483200 | Parts and accessories of machines for preparing textile fibres, n.e.s. (other than card clothing) |
84483900 | Parts and accessories of machines of heading 8445, n.e.s. |
84485900 | Parts and accessories of machines of heading 8447, n.e.s. |
84490000 | Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats; parts thereof (excluding machinery for preparing fibres for felt and calendars) |
84514000 | Machines for washing, bleaching or dyeing textile yarns, fabrics or made-up textile articles (excluding household or laundry-type washing machines) |
84515000 | Machines for reeling, unreeling, folding, cutting or pinking textile fabrics |
84518010 | Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support (excluding calendars and general purpose presses) |
84518030 | Machinery for dressing or finishing textile yarns, fabrics or other made-up textile articles (excluding machinery for dressing or finishing felt, and calendars and general purpose presses) |
84518080 | Machinery for coating or impregnating textile yarns, fabrics or other made-up textile articles (excluding calendars and general purpose presses) |
84522100 | Automatic sewing machines, industrial type |
84522900 | Sewing machines, industrial type (excluding automatic units) |
84523000 | Sewing machine needles |
84529000 | Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machines |
84532000 | Machinery for making or repairing footwear of hides, skins or leather (excluding sewing machines) |
84542000 | Ingot moulds and ladles, of a kind used in metallurgy or in metal foundries |
84543010 | Machines for casting under pressure of a kind used in metallurgy or in metal foundries |
84543090 | Casting machines of a kind used in metallurgy or in metal foundries (excluding machines for casting under pressure) |
84549000 | Parts of converters, ladles, ingot moulds and casting machines of a kind used in metallurgy or in metal foundries, n.e.s. |
84551000 | Mills for rolling metal tubes |
84552100 | Hot or combination hot and cold metal-rolling mills (excluding tubes mills) |
84552200 | Cold-rolling mills for metal (excluding tube mills) |
84553010 | Rolls for metal-rolling mills, of cast iron |
84553031 | Hot-rolling work-rolls; hot-rolling and cold-rolling back-up rolls, of open-die forged steel, for metal |
84553039 | Cold-rolling work-rolls, for metal, of open-die forged steel |
84553090 | Rolls for metal-rolling mills, of cast or wrought steel |
84559000 | Parts of metal-rolling mills, n.e.s. |
84562000 | Machine tools for working any material by removal of material, operated by ultrasonic processes (excluding cleaning apparatus operated by ultrasonic processes and material testing machines) |
84563011 | Machine tools for working any material by removal of material, operated by electro-discharge processes, wire-cut, numerically controlled |
84563019 | Machine tools for working any material by removal of material, operated by electro-discharge processes, numerically controlled (excluding such machines, wire-cut) |
84563090 | Machine tools for working any material by removal of material, operated by electro-discharge processes, not numerically controlled |
84565000 | Water-jet cutting machines |
84571010 | Horizontal machining centres for working metal |
84571090 | Machining centres for working metal (excluding horizontal machining centres) |
84572000 | Unit construction machines “single station”, for working metal |
84573010 | Multi-station transfer machines for working metal, numerically controlled |
84573090 | Multi-station transfer machines for working metal, not numerically controlled |
84592100 | Drilling machines for working metal, numerically controlled (excluding way-type unit head machines) |
84592900 | Drilling machines for working metal, not numerically controlled (excluding way-type unit head machines and hand-operated machines) |
84593100 | Boring-milling machines for metals, numerically controlled (excluding way-type unit head machines) |
84593900 | Boring-milling machines for metals, not numerically controlled (excluding way-type unit head machines) |
84594100 | Boring machines for metals, numerically controlled (excluding way-type unit head machines and boring-milling machines) |
84594900 | Boring machines for metals, not numerically controlled (excluding way-type unit head machines and boring-milling machines) |
84595100 | Milling machines for metals, knee-type, numerically controlled |
84595900 | Milling machines for metals, knee-type, not numerically controlled |
84601200 | Flat-surface grinding machines for finishing metal, numerically controlled |
84601900 | Flat-surface grinding machines for finishing metal, not numerically controlled |
84602200 | Centreless grinding machines for finishing metal, numerically controlled (other than gear finishing machines) |
84602300 | Cylindrical grinding machines for finishing metal, numerically controlled (excluding gear finishing machines and centreless machines) |
84602400 | Grinding machines for finishing metal, numerically controlled (excluding flat-surface, cylindrical and gear grinding machines) |
84602910 | Grinding machines for cylindrical metal surfaces, not numerically controlled (excluding gear finishing machines) |
84602990 | Grinding machines for finishing metal, not numerically controlled (excluding flat-surface, cylindrical and gear grinding machines) |
84603100 | Sharpening “tool or cutter grinding” machines, numerically controlled |
84603900 | Sharpening “tool or cutter grinding” machines, not numerically controlled |
84604010 | Honing or lapping machines, for finishing metals, metal carbides or cermets, numerically controlled (other than gear finishing machines) |
84604090 | Honing or lapping machines, for finishing metals, metal carbides or cermets, not numerically controlled (other than gear finishing machines) |
84609000 | Machines for deburring, polishing or otherwise finishing metal or cermets (excluding grinding, sharpening, honing and lapping machines and machines for working in the hand) |
84621110 | Closed die forging machines - Numerically controlled |
84621190 | Closed die forging machines - other |
84621910 | Other hot forming machines for forging, die forging (including presses) and hot hammers - Numerically controlled |
84621990 | Other hot forming machines for forging, die forging (including presses) and hot hammers - other |
84622210 | Profile forming machines - Numerically controlled |
84622290 | Profile forming machines – other |
84622300 | Numerically controlled press brakes |
84622400 | Numerically controlled panel benders |
84622500 | Numerically controlled roll forming machines |
84622600 | Other numerically controlled bending, folding, straightening or flattening machines |
84622910 | Other bending, folding, straightening or flattening machines (including press brakes) for flat products - numerically controlled |
84622990 | Bending, folding, straightening or flattening machines (including press brakes) for flat products n.e.s. - other |
84623210 | Slitting lines and cut-to-length lines - Numerically controlled |
84623290 | Slitting lines and cut-to-length lines - Other |
84623300 | Shearing machines - Numerically controlled |
84623900 | Other slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines |
84624200 | Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines - Numerically controlled |
84624900 | Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines – Other |
84625100 | Machines for working tube, pipe, hollow section and bar (excluding presses) - Numerically controlled |
84625900 | Machines for working tube, pipe, hollow section and bar (excluding presses) - Other |
84626110 | Hydraulic presses - Numerically controlled |
84626190 | Hydraulic presses – Other |
84626210 | Mechanical presses - Numerically controlled |
84626290 | Mechanical presses – Other |
84626310 | Servo-presses - Numerically controlled |
84626390 | Servo-presses – Other |
84626910 | Other cold metal working presses - Numerically controlled |
84626990 | Other cold metal working presses - Other |
84629010 | Other - Numerically Controlled |
84629090 | Other – Other |
84631010 | Draw-benches for metal wire |
84631090 | Draw-benches for metal bars, tubes, profiles, or the like (excluding draw-benches for wire) |
84632000 | Thread rolling machines, for working metal |
84633000 | Machine tools for working metal wire, without removing material (excluding wire bending machines of heading 8461 and machines for working in the hand) |
84662091 | Work holders for lathes (excluding work holders in the form of jigs and fixtures for specific applications, including sets of standard jig and fixture components) |
84669340 | Parts and accessories of machines of subheadings 84561110, 84561210, 845620, 845630, 845710, 845891, 84592100, 845961 or 846150 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines |
84669400 | Parts and accessories for machine tools for working metal without removing material, n.e.s. |
84671110 | Tools for working in the hand, pneumatic, rotary type, for working metal |
84671190 | Tools for working in the hand, pneumatic, rotary type (other than for working metal) |
84671900 | Pneumatic tools for working in the hand, non-rotary type |
84672110 | Drills of all kinds for working in the hand, with self-contained electric motor capable of operation without an external source of power |
84672191 | Electropneumatic drills of all kinds for working in the hand |
84672199 | Drills of all kinds for working in the hand, with self-contained electric motor operating with an external source of power (excluding electropneumatic drills) |
84672210 | Chainsaws for working in the hand, with self-contained electric motor |
84672230 | Circular saws for working in the hand, with self-contained electric motor |
84672290 | Saws for working in the hand, with self-contained electric motor (excluding chainsaws and circular saws) |
84672920 | Electromechanical tools for working in the hand, with self-contained electric motor capable of operation without an external source of power (excluding saws and drills) |
84672951 | Angle grinders for working in the hand, with self-contained electric motor, operating with an external source of power |
84672953 | Belt sanders for working in the hand, with self-contained electric motor, operating with an external source of power |
84672959 | Grinders and sanders, for working in the hand, with self-contained electric motor, operating with an external source of power (excluding angle grinders and belt sanders) |
84672970 | Planers for working in the hand, with self-contained electric motor, operating with an external source of power |
84672980 | Hedge trimmers and lawn edge cutters, for working in the hand, with self-contained electric motor operating with an external source of power |
84672985 | Electromechanical tools for working in the hand, with self-contained electric motor operating with an external source of power (excluding saws, drills, grinders, sanders, planers, hedge trimmers and lawn edge cutters) |
84678100 | Chainsaws for working in the hand, with self-contained non-electric motor |
84679100 | Parts of chainsaws, for working in the hand, with self-contained electric or non-electric motor, n.e.s. |
84679200 | Parts of pneumatic tools for working in the hand, n.e.s. |
84679900 | Parts of pneumatic tools for working in the hand, hydraulic or with self-contained electric or non-electric motor, n.e.s. |
84681000 | Hand-held blow pipes, gas-operated, for soldering, brazing or welding |
84682000 | Gas-operated machinery and apparatus for soldering, brazing, welding or surface tempering (excluding hand-held blow pipes) |
84688000 | Machinery and apparatus for welding, not gas-operated (excluding electric machines and apparatus of heading 8515) |
84689000 | Parts of machinery and apparatus for soldering, brazing, welding or surface tempering, non-electric, n.e.s. |
84705000 | Cash registers incorporating a calculating device |
84709000 | Other calculating machines n.e.s. |
84729010 | Coin-sorting, coin-counting or coin-wrapping machines |
84732910 | Electronic assemblies of accounting machines, cash registers or other machines, incorporating a calculating device, of heading 8470, n.e.s. |
84732990 | Parts and accessories of non-electronic calculators, for accounting machines, cash registers or other machines, incorporating a calculating device, of heading 8470, n.e.s. (excluding electronic assemblies) |
84733080 | Parts and accessories of automatic data-processing machines or for other machines of heading 8471, n.e.s. (excluding electronic assemblies) |
84734010 | Electronic assemblies for other office machines of heading 8472, n.e.s. |
84734080 | Parts and accessories of other office machines of heading 8472, n.e.s. (excluding electronic assemblies) |
84735020 | Electronic assemblies equally suitable for use with two or more electronic typewriters, word-processing machines, calculating machines or other machines, equipment or devices of heading 8470 to 8472, n.e.s. |
84742000 | Crushing or grinding machines for solid mineral substances |
84743100 | Concrete or mortar mixers (excluding those mounted on railway wagons or lorry chassis) |
84743200 | Machines for mixing mineral substances with bitumen |
84749010 | Parts of machinery of heading 8474, of cast iron or cast steel |
84749090 | Parts of machinery of heading 8474 (excluding of cast iron or cast steel) |
84751000 | Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes |
84762100 | Automatic beverage-vending machines incorporating heating or refrigerating devices |
84762900 | Automatic beverage-vending machines, without heating or refrigerating devices |
84768100 | Automatic goods-vending machines incorporating heating or refrigerating devices (excluding automatic beverage-vending machines) |
84768910 | Money-changing machines |
84768990 | Automatic goods-vending machines, without heating or refrigerating devices (excluding automatic beverage-vending machines and money-changing machines) |
84769010 | Parts of money-changing machines, n.e.s. |
84769090 | Parts of automatic goods-vending machines, n.e.s. (excluding of money-changing machines) |
84781000 | Machinery for preparing or making up tobacco (excluding dryers and other heating equipment, centrifuges and filter presses) |
84789000 | Parts of machinery for preparing or making up tobacco, n.e.s. |
84794000 | Rope or cable-making machines (excluding twisting machines of the type used in spinning mills) |
84797100 | Passenger boarding bridges, of a kind used in airports |
84797900 | Passenger boarding bridges (excluding of a kind used in airports) |
84798100 | Machinery for treating metal, including electric wire coil-winders, n.e.s. (excluding industrial robots, furnaces, dryers, spray guns and the like, high-pressure cleaning equipment and other jet cleaners, rolling mills or machines, machine tools and rope or cable-making machines) |
84798930 | Mobile hydraulic powered mine roof supports |
84798960 | Central greasing systems |
84798970 | Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies |
84801000 | Moulding boxes for metal foundry |
84804100 | Injection or compression-type moulds for metal or metal carbides (excluding moulds of graphite or other carbons and ceramic or glass moulds) |
84804900 | Moulds for metal or metal carbides (excluding moulds of graphite or other carbons, ceramic or glass moulds, linotype moulds or matrices, injection or compression-type moulds and ingot moulds) |
84805000 | Moulds for glass (excluding moulds of graphite or other carbons and ceramic moulds) |
84807100 | Injection or compression-type moulds for rubber or plastics |
84807900 | Moulds for rubber or plastics (other than injection or compression types) |
84823000 | Spherical roller bearings |
84825000 | Other cylindrical roller bearings, including cage and roller assemblies |
84828000 | Roller bearings, including combined ball-roller bearings (excluding ball bearings, tapered roller bearings, including cone and tapered roller assemblies, spherical roller bearings, needle and cylindrical roller bearings) |
84863000 | Machines and apparatus for the manufacture of flat panel displays |
84871010 | Ships’ or boats’ propellers and blades therefor, of bronze |
84871090 | Ships’ or boats’ propellers and blades therefor (excluding those of bronze) |
84879040 | Parts of machinery of Chapter 84, not intended for a specific purpose, of cast iron, n.e.s. |
84879051 | Parts of machinery of Chapter 84, not intended for a specific purpose, of cast steel, n.e.s. |
84879057 | Parts of machinery of Chapter 84, not intended for a specific purpose, of open-die forged or closed-die forged iron or steel, n.e.s. |
84879059 | Parts of machinery of Chapter 84, not intended for a specific purpose, of iron or steel, n.e.s. (other than cast, open-die or closed-die forged) |
84879090 | Machinery parts of Chapter 84, not intended for a specific purpose, n.e.s. |
85011010 | Synchronous motors of an output <= 18 W |
85011091 | Universal AC-DC motors of an output <= 37.5 W |
85011093 | AC motors of an output <= 37.5 W (excluding synchronous motors of an output <= 18 W) |
85011099 | DC motors of an output <= 37.5 W |
85012000 | Universal AC-DC motors of an output > 37.5 W |
85013100 | DC motors of an output <= 750 W and DC generators of an output <= 750 W |
85013200 | DC motors and DC generators of an output > 750 W but <= 75 kW |
85013400 | DC motors and DC generators of an output > 375 kW |
85014020 | AC motors, single phase, of an output <= 750 W |
85014080 | AC motors, single phase, of an output of > 750 W |
85015100 | AC motors, multi-phase, of an output <= 750 W |
85015220 | AC motors, multi-phase, of an output > 750 W but <= 7.5 kW |
85015230 | AC motors, multi-phase, of an output > 7,5 kW but <= 37 kW |
85015290 | AC motors, multi-phase, of an output > 37 kW but <= 75 kW |
85015350 | AC traction motors, multi-phase, of an output > 75 kW |
85015381 | AC motors, multi-phase, of an output of > 75 kW but <= 375 kW (excluding traction motors) |
85015394 | AC motors, multi-phase, of an output of > 375 kW but <= 750 kW (excluding traction motors) |
85015399 | AC motors, multi-phase, of an output > 750 kW (excluding traction motors) |
85016120 | AC generators “alternators”, of an output <= 7,5 kVA |
85016180 | AC generators “alternators”, of an output > 7.5 kVA but <= 75 kVA |
85021120 | Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output <= 7.5 kVA |
85021180 | Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 7.5 kVA but <= 75 kVA |
85021200 | Generating sets with compression-ignition internal combustion piston engine “diesel or semi-diesel engine” of an output > 75 kVA but <= 375 kVA |
85022020 | Generating sets with spark-ignition internal combustion piston engine, of an output <= 7.5 kVA |
85022040 | Generating sets with spark-ignition internal combustion piston engine, of an output > 7.5 kVA but <= 375 kVA |
85022060 | Generating sets with spark-ignition internal combustion piston engine, of an output > 375 kVA but <= 750 kVA |
85022080 | Generating sets with spark-ignition internal combustion piston engine, of an output > 750 kVA |
85030010 | Non-magnetic retaining rings for electric motors and electric generating sets |
85030091 | Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s., of cast iron or cast steel |
85030099 | Parts suitable for use solely or principally with electric motors and generators, electric generating sets and rotary converters, n.e.s. (excluding non-magnetic retaining rings and of cast iron or cast steel) |
85041020 | Inductors, whether or not connected with a capacitor |
85041080 | Ballasts for discharge lamps or tubes (excluding inductors, whether or not connected with a capacitor) |
85042100 | Liquid dielectric transformers, having a power handling capacity <= 650 kVA |
85042210 | Liquid dielectric transformers, having a power handling capacity > 650 kVA but <= 1,600 kVA |
85042290 | Liquid dielectric transformers, having a power handling capacity > 1,600 kVA but <= 10,000 kVA |
85042300 | Liquid dielectric transformers, having a power handling capacity > 10,000 kVA |
85043121 | Measuring transformers for voltage measurement, having a power handling capacity <= 1 kVA |
85043129 | Measuring transformers having a power handling capacity <= 1 kVA (other than for voltage measurement) |
85043180 | Transformers having a power handling capacity <= 1 kVA (excluding liquid dielectric transformers) |
85043200 | Transformers, having a power handling capacity > 1 kVA but <= 16 kVA (excluding liquid dielectric transformers) |
85044030 | Static converters of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof |
85044055 | Accumulator chargers (excluding of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof, and polycrystalline semiconductor rectifiers) |
85044082 | Rectifiers (excluding of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof) |
85044084 | Inverters having power handling capacity <= 7.5 kVA (excluding of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof) |
85044088 | Inverters having power handling capacity > 7.5 kVA (excluding of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof) |
85044090 | Static converters (excluding of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof, battery chargers, polycrystalline semiconductor and other rectifiers, and a.c. converters) |
85045000 | Inductors (excluding inductors for discharge lamps or tubes) |
85049011 | Ferrite cores for transformers and inductors |
85049013 | Steel laminations and cores, whether or not stacked or wound, for transformers and inductors |
85049017 | Parts of transformers and inductors, n.e.s. (excluding ferrite cores and steel laminations and cores) |
85049090 | Parts of static converters, n.e.s. |
85061018 | Manganese dioxide cells and batteries, alkaline (excluding spent, and cylindrical cells) |
85061091 | Manganese dioxide cells and batteries, non-alkaline, in the form of cylindrical cells (excluding spent) |
85061098 | Manganese dioxide cells and batteries, non-alkaline (excluding spent, and cylindrical cells) |
85063000 | Mercuric oxide cells and batteries (excluding spent) |
85064000 | Silver oxide cells and batteries (excluding spent) |
85065010 | Lithium cells and batteries, in the form of cylindrical cells (excluding spent) |
85065030 | Lithium cells and batteries, in the form of button cells (excluding spent) |
85065090 | Lithium cells and batteries (excluding spent, and in the form of cylindrical or button cells) |
85068005 | Dry zinc-carbon batteries of a voltage of >= 5.5 V but <= 6.5 V (excluding spent) |
85071020 | Lead-acid accumulators of a kind used for starting piston engines (starter batteries), working with liquid electrolyte (excluding spent) |
85071080 | Lead-acid accumulators of a kind used for starting piston engines (starter batteries), working with non-liquid electrolyte (excluding spent) |
85072020 | Lead-acid accumulators, working with liquid electrolyte (excluding spent and starter batteries) |
85072080 | Lead-acid accumulators, working with non-liquid electrolyte (excluding spent and starter batteries) |
85075000 | Nickel-metal hydride accumulators (excluding spent) |
85076000 | Lithium-ion accumulators (excluding spent) |
85078000 | Other electric accumulators (excluding spent and lead-acid, nickel-cadmium, nickel-metal hydride and lithium-ion accumulators) |
85079030 | Separators for electric accumulators (excluding separators of vulcanised rubber other than hard rubber or of textiles) |
85079080 | Parts of electric accumulators (excluding separators) |
85121000 | Electric lighting or visual signalling equipment of a kind used for bicycles (other than lamps of heading 8539) |
85129010 | Parts of electrical burglar alarms of a kind used for motor vehicles, n.e.s. |
85129090 | Parts of electrical lighting or signalling equipment, windscreen wipers, defrosters and demisters of a kind used for motor vehicles, n.e.s. (excluding of burglar alarms for motor vehicles) |
85141100 | Resistance heated furnaces and ovens - Hot isostatic presses |
85141980 | Other resistance heated furnaces and ovens – other |
85143110 | Electron beam furnaces - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies |
85143190 | Electron beam furnaces – Other |
85143210 | Plasma and vacuum arc furnaces - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies |
85143290 | Plasma and vacuum arc furnaces – Other |
85143910 | Other furnaces and ovens, other - Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies |
85143990 | Other furnaces and ovens, other – Other |
85149030 | Other furnaces and ovens of subheading 8514 31 10, 8514 32 10 and 8514 39 10 |
85149070 | Parts of electric industrial or laboratory furnaces and ovens, including of those functioning by induction or dielectric loss, and of industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss, n.e.s. |
85151100 | Soldering irons and guns, electric |
85151910 | Wave soldering machines of a kind used solely or principally for the manufacture of printed circuit assemblies |
85151990 | Brazing or soldering machines (excluding soldering irons and guns, and wave soldering machines used in manufacturing printed circuit assemblies) |
85152100 | Fully or partly automatic machines for resistance welding of metals |
85152900 | Machines for resistance welding of metals, neither fully nor partly automatic |
85159020 | Parts of wave soldering machines used in manufacturing printed circuit assemblies |
85159080 | Parts of machines and apparatus for soldering or welding or for hot spraying of metals, metal carbides or cermets, n.e.s. |
85162910 | Liquid filled electric radiators, for space-heating and soil-heating |
85163200 | Electro-thermic hairdressing apparatus (excluding hairdryers) |
85163300 | Electric hand-drying apparatus |
85164000 | Electric smoothing irons |
85241100 | Flat panel display modules, whether or not incorporating touch-sensitive screens, without drivers or control circuits, of liquid crystals |
85249100 | Flat panel display modules, whether or not incorporating touch-sensitive screens of liquid crystals |
85299018 | Parts suitable for use solely or principally with the apparatus of headings 8524 to 8528, (excluding aerials, aerial fitters and separators, organic-light emitting modifiers and organic light-emitting diode panels) |
85301000 | Electrical signalling, safety or traffic control equipment for railways or tramways (excluding mechanical or electromechanical equipment of heading 8608) |
85308000 | Electrical signalling, safety or traffic control equipment (excluding that for railways or tramways and mechanical or electromechanical equipment of heading 8608) |
85312020 | Indicator panels with light emitting diodes “LED” (excluding those of a kind used for motor vehicles, cycles or traffic signalling) |
85312040 | Indicator panels with matrix liquid crystal devices “LCD”, active (excluding those of a kind used for motor vehicles, cycles or traffic signalling) |
85312095 | Indicator panels with liquid crystal devices “LCD” (excluding active matrix liquid crystal devices and those of a kind used for motor vehicles, cycles or traffic signalling) |
85318040 | Electric bells, buzzers, door chimes and similar (excluding burglar or fire alarms and similar apparatus and apparatus for cycles, motor vehicles and traffic signalling) |
85318070 | Electric sound or visual signalling apparatus (excluding indicator panels with LCDs or LEDs, burglar or fire alarms and similar apparatus, apparatus for cycles, motor vehicles and traffic signalling, and bells, buzzers, door chimes and similar) |
85319000 | Parts of electric sound or visual signalling apparatus, n.e.s. |
85322100 | Fixed electrical capacitors, tantalum (excluding power capacitors) |
85322200 | Fixed electrical capacitors, aluminium electrolytic (excluding power capacitors) |
85322300 | Fixed electrical capacitors, ceramic dielectric, single layer (excluding power capacitors) |
85322400 | Fixed electrical capacitors, ceramic dielectric, multilayer (excluding power capacitors) |
85322500 | Fixed electrical capacitors, dielectric of paper or plastics (excluding power capacitors) |
85322900 | Fixed electrical capacitors (excluding tantalum, aluminium electrolytic, ceramic, paper, plastic and power capacitors) |
85323000 | Variable or adjustable “pre-set” electrical capacitors |
85329000 | Parts of electrical “pre-set” capacitors, fixed, variable or adjustable, n.e.s. |
85331000 | Fixed carbon resistors, composition or film types (excluding heating resistors) |
85332100 | Fixed electrical resistors for a power handling capacity <= 20 W (excluding heating resistors) |
85333100 | Wirewound variable electrical resistors, including rheostats and potentiometers, for a power handling capacity <= 20 W (excluding heating resistors) |
85333900 | Wirewound variable electrical resistors, including rheostats and potentiometers, for a power handling capacity > 20 W (excluding heating resistors) |
85334010 | Electrical variable resistors, including rheostats and potentiometers, for a power handling capacity <= 20 W (excluding wirewound variable resistors and heating resistors) |
85334090 | Electrical variable resistors, including rheostats and potentiometers, for a power handling capacity > 20 W (excluding wirewound variable resistors and heating resistors) |
85339000 | Parts of electrical resistors, including rheostats and potentiometers, n.e.s. |
85340011 | Multilayer printed circuits, consisting only of conductor elements and contacts |
85340019 | Printed circuits consisting only of conductor elements and contacts (excluding multiple printed circuits) |
85340090 | Printed circuits consisting of conductor elements, contacts and other passive elements (excluding those with passive and active elements) |
85351000 | Fuses for a voltage > 1,000 V |
85362090 | Automatic circuit breakers for a voltage <= 1,000 V, for a current > 63 A |
85364110 | Relays for a voltage <= 60 V, for a current <= 2 A |
85364190 | Relays for a voltage <= 60 V, for a current > 2 A |
85364900 | Relays for a voltage > 60 V but <= 1,000 V |
85365003 | Electronic AC switches consisting of optically coupled input and output circuits “insulated thyristor AC switches” (excluding relays and automatic circuit breakers) |
85365005 | Electronic switches, including temperature protected electronic switches, consisting of a transistor and a logic chip “chip-on-chip technology” (excluding relays and automatic circuit breakers) |
85365007 | Electromechanical snap-action switches for a current <= 11 A (excluding relays and automatic circuit breakers) |
85365011 | Push-button switches for a voltage of <= 60 V |
85365015 | Rotary switches for a voltage of <= 60 V |
85365019 | Switches for a voltage of <= 60 V (excluding relays, push-button switches and rotary switches) |
85365080 | Other switches n.e.s. |
85366110 | Edison lamp holders, electric |
85366190 | Lamp holders for a voltage <= 1,000 V (excluding Edison lamp holders) |
85366910 | Plugs and sockets for a voltage of <= 1,000 V, for coaxial cables |
85366930 | Plugs and sockets for a voltage of <= 1,000 V, for printed circuits |
85366990 | Plugs and sockets for a voltage of <= 1,000 V (excluding those for coaxial cables and printed circuits) |
85367000 | Connectors for optical fibres, optical fibre bundles or cables |
85369001 | Prefabricated elements for electrical circuits, for a voltage of <= 1,000 V |
85369010 | Connections and contact elements, for wire and cables, for a voltage of <= 1,000 V (excluding plugs, sockets and prefabricated elements) |
85369040 | Battery clamps of a kind used for motor vehicles of heading 8702, 8703, 8704, or 8711 |
85369095 | Electrical apparatus for making connections to or in electrical circuits, for a voltage <= 1,000 V (excluding fuses, circuit breakers and other apparatus for protecting electrical circuits, relays and other switches, lamp holders, plugs and sockets, prefabricated elements for electrical circuits, connections and contact elements for wire and cables, and car battery clamps) |
85389011 | Electronic assemblies for wafer probers of subheading 8536.90.20 |
85389019 | Parts for wafer probers of subheading 8536.90.20, n.e.s. (excluding electronic assemblies) |
85389091 | Electronic assemblies for electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits of heading 8535 or 8536 and for control desks, cabinets and similar combinations of apparatus of heading 8537 (excluding for wafer probers of subheading 8536.90.20) |
85389099 | Parts suitable for use solely or principally with the apparatus of heading 8535, 8536 or 8537, n.e.s. (excluding electronic assemblies, and boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus, and for wafer probers of subheading 8536.90.20) |
85391000 | Sealed beam lamp units |
85392130 | Tungsten halogen filament lamps for motorcycles or other motor vehicles (excluding sealed beam lamp units) |
85392192 | Tungsten halogen filament lamps for a voltage > 100 V |
85392198 | Tungsten halogen filament lamps for a voltage <= 100 V (excluding those for motorcycles or other motor vehicles) |
85392210 | Reflector filament lamps of a power <= 200 W and for a voltage > 100 V (excluding tungsten halogen filament lamps) |
85392290 | Filament lamps of a power <= 200 W and for a voltage > 100 V (excluding tungsten halogen lamps, reflector lamps and ultraviolet or infra-red lamps) |
85392930 | Filament lamps for motorcycles or other motor vehicles (excluding tungsten halogen lamps) |
85392992 | Filament lamps for a voltage > 100 V (excluding tungsten halogen lamps, lamps of a power <= 200 W, and ultraviolet or infra-red lamps) |
85392998 | Filament lamps for a voltage <= 100 V (excluding tungsten halogen lamps and lamps for motorcycles and other motor vehicles) |
85393110 | Discharge lamps, fluorescent, hot cathode, with double ended cap |
85393190 | Discharge lamps, fluorescent, hot cathode (excluding with double ended cap) |
85393220 | Mercury or sodium vapour lamps |
85393290 | Metal halide lamps |
85393920 | Cold-cathode fluorescent lamps “CCFLs” for backlighting of flat panel displays |
85393980 | Discharge lamps (excluding hot-cathode fluorescent lamps, mercury or sodium vapour lamps, metal halide lamps, ultraviolet lamps, and cold-cathode fluorescent lamps “CCFLs” for backlighting of flat panel displays) |
85394900 | Ultraviolet or infra-red lamps |
85399010 | Lamp bases for filament or discharge lamps and other lamps of heading 8539, n.e.s. |
85399090 | Parts of electric filament or discharge lamps, sealed beam lamp units, ultraviolet or infra-red lamps, arc lamps and LED lamps, n.e.s. |
85401100 | Cathode ray television picture tubes, including video monitor cathode ray tubes, colour |
85401200 | Cathode ray television picture tubes, including video monitor cathode ray tubes, black and white or other monochrome, with a screen width-to-height ratio of < 1.5 and a diagonal measurement of the screen > 72 cm |
85404000 | Data/graphic display tubes, monochrome; data/graphic display tubes, colour, with a phosphor dot screen pitch of < 0.4 mm (excluding photo cathode tubes and cathode ray tubes) |
85412100 | Transistors with a dissipation rate < 1 W (excluding photosensitive transistors) |
85413000 | Thyristors, diacs and triacs (excluding photosensitive semiconductor devices) |
85414100 | Light-emitting diodes (LED) |
85414200 | Photovoltaic cells not assembled in modules or made up into panels |
85414300 | Photovoltaic cells assembled in modules or made up into panels |
85414900 | Other photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes (LED) |
85415100 | Semiconductor-based transducers |
85415900 | Other semiconductor devices – other |
85416000 | Mounted piezoelectric crystals |
85419000 | Parts of diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, light emitting diodes and mounted piezoelectric crystals, n.e.s. |
85423310 | Electronic multi-component integrated circuits “MCOs” as amplifiers as specified in note 9 (b) (4) to Chapter 85 |
85423390 | Electronic integrated circuits as amplifiers (excluding multi-component integrated circuits) |
85429000 | Parts of electronic integrated circuits, n.e.s. |
85432000 | Signal generators, electrical |
85434000 | Electronic cigarettes and similar personal electric vaporizing devices |
85437001 | Articles specifically designed for connection to telegraphic or telephonic apparatus or instruments or to telegraphic or telephonic networks |
85437002 | Microwave amplifiers |
85437003 | Cordless infrared remote control devices for video game consoles |
85437004 | Digital flight-data recorders |
85437005 | Portable battery operated electronic readers for recording and reproducing text, still image or audio file |
85437006 | Digital signal processing apparatus capable of connecting to a wired or wireless network for the mixing of sound |
85437007 | Portable interactive electronic education devices primarily designed for children (excluding toys of 9503 00 87) |
85437008 | Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and specimen holders |
85437009 | Touch screens without display capabilities, for incorporation into apparatus having a display (excluding those for electric control of subheading 8537 10 95) |
85437060 | Electric fence energisers |
85441110 | Winding wire for electrical purposes, of copper, lacquered or enamelled |
85441190 | Winding wire for electrical purposes, of copper, insulated (excluding lacquered or enamelled) |
85444210 | Electric conductors of a kind used for telecommunications, for a voltage <= 1,000 V, insulated, fitted with connectors, n.e.s. |
85444290 | Electric conductors, for a voltage <= 1,000 V, insulated, fitted with connectors, n.e.s. (other than of a kind used for telecommunications) |
85444920 | Conductors, electric, for a voltage <= 80 V, insulated, not fitted with connectors, of a kind used for telecommunications, n.e.s. |
85444991 | Electric wire and cables, for a voltage <= 1,000 V, insulated, not fitted with connectors, with individual conductor wires of a diameter > 0.51 mm, n.e.s. |
85444993 | Conductors, electric, for a voltage <= 80 V, insulated, not fitted with connectors, n.e.s. (excluding winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0.51 mm) |
85444995 | Electric conductors for a voltage > 80 V but < 1,000 V, insulated, not fitted with connectors, n.e.s. (excluding winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0.51 mm) |
85444999 | Electric conductors for a voltage 1,000 V, insulated, not fitted with connectors, n.e.s. (excluding winding wire, coaxial conductors, wiring sets for vehicles, aircraft or ships, and wire and cables with individual conductor wires of a diameter > 0.51 mm) |
85446010 | Electric conductors for a voltage > 1,000 V, insulated, with copper conductors, n.e.s. |
85446090 | Electric conductors for a voltage > 1,000 V, insulated, not with copper conductors, n.e.s. |
85451100 | Electrodes of graphite or other carbon, for furnaces |
85451900 | Electrodes of graphite or other carbon, for electrical purposes (excluding those used for furnaces) |
85452000 | Carbon brushes for electrical purposes |
85459010 | Heating resistors for electrical purposes, of graphite or other carbon |
85459090 | Articles of graphite or other carbon, for electrical purposes (excluding electrodes, carbon brushes and heating resistors) |
85461000 | Electrical insulators of glass (excluding insulating fittings) |
85462000 | Electrical insulators of ceramics (excluding insulating fittings) |
85469010 | Electrical insulators of plastics (excluding insulating fittings) |
85469090 | Electrical insulators (excluding those of glass, ceramics or plastics and insulating fittings) |
85471000 | Insulating fittings for electrical purposes, of ceramics |
85472000 | Insulating fittings for electrical purposes, of plastics |
86012000 | Rail locomotives powered by electric accumulators |
86021000 | Diesel-electric locomotives |
86061000 | Railway or tramway tank wagons and the like (excluding self-propelled) |
86063000 | Railway or tramway self-discharging goods vans and wagons (excluding tank wagons and the like and insulated or refrigerated goods vans and wagons) |
86069110 | Railway or tramway goods vans and wagons, covered and closed, specially designed for the transport of highly radioactive materials (excluding tank wagons and the like and insulated, refrigerated or self-discharging goods vans and wagons) |
86069180 | Railway or tramway goods vans and wagons, covered and closed (excluding those specially designed for the transport of highly radioactive materials, tank wagons and the like and self-discharging goods vans and wagons) |
86069900 | Railway or tramway goods vans and wagons (excluding those specially designed for the transport of highly radioactive materials, tank wagons and the like, insulated, refrigerated or self-discharging goods vans and wagons and open goods vans and wagons with non-removable sides of a height > 60 cm) |
86080000 | Railway or tramway track fixtures and fittings (excluding sleepers of wood, concrete or steel, sections of track and other track fixtures not yet assembled and railway or tramway track construction material); mechanical, including electromechanical, signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing |
86090010 | Containers with an anti-radiation lead covering, for the transport of radioactive materials |
86090090 | Containers specially designed and equipped for carriage by one or more modes of transport (excluding those with an anti-radiation lead covering for the transport of radioactive materials) |
89012010 | Sea-going tankers |
89012090 | Tankers (excluding seagoing tankers) |
89013010 | Sea-going refrigerated vessels (excluding tankers) |
89013090 | Refrigerated vessels (excluding seagoing vessels and tankers) |
89040010 | Tugs, seagoing and for inland waterways |
89040091 | Sea-going pusher craft |
89040099 | Pusher craft (excluding seagoing) |
89051010 | Sea-going dredgers |
89051090 | Dredgers (excluding seagoing) |
89071000 | Inflatable rafts |
89079000 | Rafts, tanks, coffer-dams, landing stages, buoys, beacons and other floating structures (excluding inflatable rafts, vessels of heading 8901 to 8906 and floating structures for breaking up) |
89080000 | Vessels and other floating structures for breaking up |
90011010 | Image conductor cables of optical fibres (excluding cables made up of individually sheathed fibres of heading 8544) |
90011090 | Optical fibres, optical fibre bundles and cables (excluding made up of individually sheathed fibres of heading 8544 and image conductor cables) |
90012000 | Sheets and plates of polarising material |
90085000 | Image projectors, and photographic enlargers and reducers (excluding cinematographic and parts) |
90089000 | Parts and accessories for image projectors, photographic enlargers and reducers, n.e.s. |
90105000 | Apparatus and equipment for photographic or cinematographic laboratories, n.e.s.; negatoscopes |
90106000 | Projection screens |
90109020 | Parts and accessories of apparatus and equipment of subheadings 9010 50 00 or 9010 60 00, n.e.s. |
90109080 | Parts and accessories for apparatus and equipment for automatically developing photographic or cinematographic film or paper in rolls or for automatically exposing developed film to rolls of photographic paper, n.e.s. |
90131010 | Telescopes designed to form parts of machines, appliances, instruments or apparatus of Chapter 84, 85 or 90 |
90138000 | Lasers, other than laser diodes; other optical appliances and instruments, not specified or included elsewhere in this Chapter - Other devices, appliances and instruments |
90139005 | Parts and accessories for telescopic sights for fitting to arms or for periscopes |
90139080 | Parts and accessories for lasers and other instruments, apparatus and appliances not specified or included elsewhere in Chapter 90, n.e.s. |
90142080 | Instruments and appliances for aeronautical or space navigation (excluding inertial navigation systems, compasses and radio navigational equipment) |
90152000 | Theodolites and tachymeters (tacheometers) |
90160010 | Balances of a sensitivity of 50 mg or better, with or without weights |
90160090 | Parts and accessories for balances of a sensitivity of 50 mg or better, n.e.s. |
90171010 | Plotters as drafting machines |
90171090 | Drafting tables and machines, whether or not automatic (excluding plotters) |
90172005 | Plotters as drawing or marking-out instruments |
90172010 | Drawing instruments (excluding drafting tables and machines, plotters) |
90172039 | Marking-out instruments |
90172090 | Mathematical calculating instruments, including slide rules, disc calculators and the like (excluding calculating machines) |
90173000 | Micrometers, callipers and gauges (excluding gauges without adjustable devices of subheading 9031.80) |
90178010 | Measuring rods and tapes and divided scales |
90178090 | Hand-held instruments for measuring length, n.e.s. |
90179000 | Parts and accessories for drawing, marking-out or mathematical calculating instruments and instruments for measuring length for use in the hand, n.e.s. |
90241020 | Machines and appliances for universal testing of mechanical properties of metals or for tensile testing of metals |
90241040 | Machines and appliances for testing the hardness of metals |
90241080 | Machines and appliances for testing the mechanical properties of metals (excluding for universal, tensile or hardness testing) |
90248000 | Machines and appliances for testing the mechanical properties of materials (excluding metals) |
90249000 | Parts and accessories for machines and appliances for testing the mechanical properties of materials, n.e.s. |
90258020 | Barometers, not combined with other instruments |
90258080 | Hydrometers, areometers and similar floating instruments, hygrometers and psychrometers, whether or not combined with each other or with thermometers or barometers, non-electronic |
90261021 | Electronic flow meters for measuring or checking the flow or level of liquids (excluding meters and regulators) |
90261029 | Electronic instruments and apparatus for measuring or checking the flow or level of liquids (excluding flow meters, meters and regulators) |
90261081 | Flow meters for measuring or checking the flow or level of liquids, non-electronic (excluding meters and regulators) |
90261089 | Instruments and apparatus for measuring or checking the flow or level of liquids, non-electronic (excluding flow meters, meters and regulators) |
90268020 | Electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s. |
90268080 | Non-electronic instruments or apparatus for measuring or checking variables of liquids or gases, n.e.s. |
90269000 | Parts and accessories for instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases, n.e.s. |
90278910 | Exposure meters |
90278930 | pH meters, rH meters and other apparatus for measuring conductivity |
90278990 | Instruments and apparatus for physical or chemical analysis or for determining surface tension or the like, or for measuring heat or sound, n.e.s. |
90281000 | Gas meters, including calibrating meters therefor |
90282000 | Liquid meters, including calibrating meters therefor |
90283011 | Electricity supply or production meters for alternating current, single-phase, including calibrating meters therefor |
90283019 | Electricity supply or production meters for alternating current, multi-phase, including calibrating meters therefor |
90283090 | Electricity supply or production meters for continuous current, including calibrating meters therefor |
90289010 | Parts and accessories for electricity meters, n.e.s. |
90289090 | Parts and accessories for gas or liquid meters, n.e.s. |
90292031 | Speed indicators for land vehicles |
90292038 | Speed indicators and tachometers (excluding for land vehicles) |
90292090 | Stroboscopes |
90299000 | Parts and accessories for revolution counters, production counters, taximeters, milometers, pedometers and the like, speed indicators and tachometers, and stroboscopes, n.e.s. |
90302000 | Oscilloscopes and oscillographs |
90303320 | Resistance measuring instruments without recording device |
90319000 | Parts and accessories for instruments, appliances and machines for measuring and checking, n.e.s. |
90321080 | Thermostats (excluding electronic) |
90322000 | Manostats (excluding taps, cocks and valves of heading 8481) |
90329000 | Parts and accessories for regulating or controlling instruments and apparatus, n.e.s. |
90330010 | Light-emitting diode “LED” backlight modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlight illumination for liquid crystal displays “LCDs” of apparatus of Chapter 90 |
90330090 | Parts and accessories for machines, appliances, instruments or other apparatus in Chapter 90, n.e.s.] |
Regulation 54B
Textual Amendments
F49Sch. 3J inserted (16.12.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 17) Regulations 2022 (S.I. 2022/1331), reg. 1(2)(b), Sch. 2
1.—(1) For the purpose of this Schedule, a service falls within a code of a particular Central Product Classification if it is, or would be, classified under that code in accordance with the provisions on interpretation set out in the relevant Central Product Classification specified in sub-paragraph (2).
(2) In this Schedule—
“the 1991 Central Product Classification” means the Provisional Central Product Classification published by the United Nations in 1991, Statistical Papers Series M, No. 77;
“the 2002 Central Product Classification” means the Central Product Classification published by the United Nations in 2002, Statistical Papers Series M, No. 77, Version 1.1;
“the 2015 Central Product Classification” means the Central Product Classification published by the United Nations in 2015, Statistical Papers Series M, No. 77, Version 2.1.
2. “Accounting services” means—
(a)accounting review services, which are services involving the review by a person of annual and interim financial statements and other accounting information, but excluding auditing services;
(b)compilation of financial statements services, which are services involving the compilation by a person of financial statements from information provided by a client, including preparation services of business tax returns when provided together with the preparation of financial statements for a single fee, but excluding such preparation services of business tax returns when provided as a separate service;
(c)other accounting services such as attestations, valuations, preparation services of pro forma statements;
(d)bookkeeping services, which are services consisting of classifying and recording business transactions in terms of money or some unit of measurement in the books of account, but excluding bookkeeping services related to tax returns.
3. “Advertising services” means the services falling within code 836 of the 2002 Central Product Classification (advertising services) comprising—
(a)83610 (planning, creating and placement services of advertising),
(b)83620 (purchase or sale of advertising space or time, on commission),
(c)83631 (sale of advertising space in print media (except on commission)),
(d)83632 (sale of TV/radio advertising time (except on commission)),
(e)83633 (sale of Internet advertising space (except on commission)),
(f)83639 (sale of other advertising space or time (except on commission)), and
(g)83690 (other advertising services).
4. “Architectural services” means the services falling within the following codes of the 1991 Central Product Classification—
(a)8671 (architectural services) comprising—
(i)86711 (advisory and pre-design architectural services),
(ii)86712 (architectural design services),
(iii)86713 (contract administration services),
(iv)86714 (combined architectural design and contract administration services), and
(v)86719 (other architectural services);
(b)8674 (urban planning and landscape architectural services) comprising—
(i)86741 (urban planning services), and
(ii)86742 (landscape architectural services).
5. “Auditing services” means services consisting of examination of the accounting records and other supporting evidence of an organisation for the purpose of expressing an opinion as to—
(a)whether financial statements of the organisation present fairly its position as at a given date, and
(b)the results of its operations for the period ending on that date,
in accordance with generally accepted accounting principles.
6. “Business and management consulting services” means advisory, guidance and operational assistance services provided for business policy and strategy and the overall planning, structuring and control of an organisation, which includes (but is not limited to) management auditing, market management, human resources, production management and project management consulting.
7. “Engineering services” means the services falling within the following codes of the 1991 Central Product Classification—
(a)8672 (engineering services) comprising—
(i)86721 (advisory and consultative engineering services),
(ii)86722 (engineering design services for the construction of foundations and building structures),
(iii)86723 (engineering design services for mechanical and electrical installations for buildings),
(iv)86724 (engineering design services for the construction of civil engineering works),
(v)86725 (engineering design services for industrial processes and production),
(vi)86726 (engineering design services not elsewhere classified),
(vii)86727 (other engineering services during the construction and installation phase), and
(viii)86729 (other engineering services not elsewhere classified);
(b)8673 (integrated engineering services) comprising—
(i)86731 (integrated engineering services for transportation infrastructure turnkey projects),
(ii)86732 (integrated engineering and project management services for water supply and sanitation works turnkey projects),
(iii)86733 (integrated engineering services for the construction of manufacturing turnkey projects), and
(iv)86739 (integrated engineering services for other turnkey projects);
(c)8675 (engineering related scientific and technical consulting services) comprising—
(i)86751 (geological, geophysical and other scientific prospecting services),
(ii)86752 (subsurface surveying services),
(iii)86753 (surface surveying services), and
(iv)86754 (map making services);
(d)8676 (technical testing and analysis services) comprising—
(i)86761 (composition and purity testing and analysis services),
(ii)86762 (testing and analysis services of physical properties),
(iii)86763 (testing and analysis services of integrated mechanical and electrical systems),
(iv)86764 (technical inspection services), and
(v)86769 (other technical testing and analysis services).
8. “IT consultancy and design services” means the services falling within the following codes of the 2015 Central Product Classification—
(a)83131 (IT consulting services);
(b)83141 (IT design and development services for applications).
9. “Public relations services” means services provided by a person related to improving the image of their clients and their relationship with the general public and other institutions, but excludes planning and creating advertising services or public opinion polling services.]
Regulations 32 to 38
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F50Sch. 4 omitted (1.3.2022) by virtue of The Russia (Sanctions) (EU Exit) (Amendment) (No. 3) Regulations 2022 (S.I. 2022/195), regs. 1(2), 10(2) (with reg. 11)
Regulation 64(2)
Textual Amendments
A1. In this Schedule—
“consular post” has the same meaning as in the Vienna Convention on Consular Relations done at Vienna on 24 April 1963F52, and any reference to the functions of a consular post is to be read in accordance with that Convention;
“diplomatic mission” and any reference to the functions of a diplomatic mission are to be read in accordance with the Vienna Convention on Diplomatic Relations done at Vienna on 18 April 1961F53;
“humanitarian assistance activity” includes the work of international and non-governmental organisations carrying out relief activities for the benefit of the civilian population of a country;
“medical goods” includes medicines and medical devices;
[F54“relevant financial authority” means authorities involved in the regulation of financial services in the United Kingdom, including the Financial Conduct Authority, the Prudential Regulation Authority and the Bank of England;]
“spaceflight activity” has the meaning given in section 1(6) of the Space Industry Act 2018.]
Textual Amendments
F52United Nations Treaty Series, vol. 596, p.261.
F53United Nations Treaty Series, vol. 500, p. 95.
F54Words in Sch. 5 para. A1 inserted (16.12.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 17) Regulations 2022 (S.I. 2022/1331), regs. 1(2)(b), 20(4)(a)
1. In this Part of this Schedule—
“designated person” has the same meaning as it has in Chapter 1 of Part 3 ([F56Asset-freeze etc.]);
“frozen funds or economic resources” means funds or economic resources frozen by virtue of regulation 11, and any reference to a person's frozen funds or economic resources is to funds or economic resources frozen as a consequence of the designation of that person for the purpose of that regulation.
Textual Amendments
F55Words in Sch. 5 para. 1 heading inserted (1.3.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(b)
F56Words in Sch. 5 para. 1 substituted (1.3.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(c)
Commencement Information
I31Sch. 5 para. 1 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
2.—(1) To enable the basic needs of a designated person, or (in the case of an individual) any dependent family member of such a person, to be met.
(2) In the case of an individual, in sub-paragraph (1) “basic needs” includes—
(a)medical needs;
(b)needs for—
(i)food;
(ii)[F57payment] of insurance premiums;
(iii)[F58payment] of tax;
(iv)rent or mortgage payments;
(v)utility payments.
(3) In the case of a person other than an individual, in sub-paragraph (1) “basic needs” includes needs for—
(a)payment of insurance premiums;
(b)payment of reasonable fees for the provision of property management services;
(c)payment of remuneration, allowances or pensions of employees;
(d)payment of tax;
(e)rent or mortgage payments;
(f)utility payments.
(4) In sub-paragraph (1)—
“dependent” means financially dependent;
“family member” includes—
the wife or husband of the designated person;
the civil partner of the designated person;
any parent or other ascendant of the designated person;
any child or other descendant of the designated person;
any person who is a brother or sister of the designated person, or a child or other descendant of such a person.
Textual Amendments
F57Word in Sch. 5 para. 2(2)(b)(ii) substituted (31.12.2020 immediately after IP completion day) by The Sanctions (EU Exit) (Miscellaneous Amendments) (No. 2) Regulations 2020 (S.I. 2020/590), regs. 1(2), 10(15); S.I. 2020/1514, reg. 4
F58Word in Sch. 5 para. 2(2)(b)(iii) substituted (31.12.2020 immediately after IP completion day) by The Sanctions (EU Exit) (Miscellaneous Amendments) (No. 2) Regulations 2020 (S.I. 2020/590), regs. 1(2), 10(15); S.I. 2020/1514, reg. 4
Commencement Information
I32Sch. 5 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
3. To enable the payment of—
(a)reasonable professional fees for the provision of legal services, or
(b)reasonable expenses associated with the provision of legal services.
Commencement Information
I33Sch. 5 para. 3 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
4. To enable the payment of—
(a)reasonable fees, or
(b)reasonable service charges,
arising from the routine holding or maintenance of frozen funds or economic resources.
Commencement Information
I34Sch. 5 para. 4 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
5. To enable an extraordinary expense of a designated person to be met.
Commencement Information
I35Sch. 5 para. 5 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
6. To enable, by the use of a designated person's frozen funds or economic resources, the implementation or satisfaction (in whole or in part) of a judicial, administrative or arbitral decision or lien, provided that—
(a)the funds or economic resources so used are the subject of the decision or lien,
(b)the decision or lien—
(i)was made or established before the date on which the person became a designated person, and
(ii)is enforceable in the United Kingdom, and
(c)the use of the frozen funds or economic resources does not directly or indirectly benefit any other designated person.
Commencement Information
I36Sch. 5 para. 6 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
7. To enable anything to be done to deal with an extraordinary situation.
Commencement Information
I37Sch. 5 para. 7 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
8. To enable, by the use of a designated person's frozen funds or economic resources, the satisfaction of an obligation of that person (whether arising under a contract, other agreement or otherwise), provided that—
(a)the obligation arose before the date on which the person became a designated person, and
(b)no payments are made to another designated person, whether directly or indirectly.
Commencement Information
I38Sch. 5 para. 8 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
9.—(1) To enable anything to be done in order that the functions of a consular post in [F59non-government controlled Ukrainian territory], or of an international organisation enjoying immunities in accordance with international law, may be carried out.
F60(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F59Words in Sch. 5 para. 9 substituted (30.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 7) Regulations 2022 (S.I. 2022/395), regs. 1(2), 39(a)
F60Sch. 5 para. 9(2) omitted (1.3.2022) by virtue of The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(d)
Commencement Information
I39Sch. 5 para. 9 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
9A. To enable anything to be done in connection with the performance of any humanitarian assistance activity.
Textual Amendments
F61Sch. 5 paras. 9A-9T and related Pt. headings inserted (1.3.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(e)
9B.—(1) To enable anything to be done in connection with the provision of medical goods or services for the benefit of the civilian population of a country.
(2) To enable the import, export or use of medical goods.
Textual Amendments
F61Sch. 5 paras. 9A-9T and related Pt. headings inserted (1.3.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(e)
9C. To enable anything to be done in connection with the production or distribution of food for the benefit of the civilian population of a country.
Textual Amendments
F61Sch. 5 paras. 9A-9T and related Pt. headings inserted (1.3.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(e)
9D.—(1) To enable anything to be done in order that the functions of a diplomatic mission or consular post in Russia or of an international organisation enjoying immunities in accordance with international law may be carried out.
(2) To enable anything to be done in order that the functions of a diplomatic mission or consular post of Russia in the United Kingdom may be carried out.
Textual Amendments
F61Sch. 5 paras. 9A-9T and related Pt. headings inserted (1.3.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(e)
9E. To enable anything to be done in connection with the performance of any humanitarian assistance activity.
9F.—(1) To enable anything to be done in connection with the provision of medical goods or services for the benefit of the civilian population of a country.
(2) To enable the import, export or use of medical goods.
9G. To enable anything to be done in connection with the production or distribution of food for the benefit of the civilian population of a country.
9H.—(1) To enable anything to be done in order that the functions of a diplomatic mission or consular post in Russia, or of an international organisation enjoying immunities in accordance with international law may be carried out.
(2) To enable anything to be done in order that the functions of a diplomatic mission or consular post of Russia in the United Kingdom may be carried out.
9I. To enable anything to be done in order for a United Kingdom person to undertake spaceflight activity.
9J. To enable anything to be done to deal with an extraordinary situation.
9K. In this Part, “designated person” has the meaning given in regulation 17A.
9L.—(1) To enable the basic needs of a designated person, or a person owned or controlled directly or indirectly (within the meaning of regulation 7) by the designated person, to be met.
(2) In the case of a person other than an individual, in sub-paragraph (1) “basic needs” includes needs for—
(a)payment of insurance premiums;
(b)payment of reasonable fees for the provision of property management services;
(c)payment of reasonable fees for the provision of insolvency services;
(d)payment of remuneration, allowances or pensions of employees;
(e)payment of tax;
(f)rent or mortgage payments;
(g)utility payments.
9M. To enable the payment of—
(a)reasonable professional fees for the provision of legal services to the designated person or a person owned or controlled directly or indirectly (within the meaning of regulation 7) by the designated person, or
(b)reasonable expenses associated with the provision of legal services to the designated person (or a person owned or controlled directly or indirectly (within the meaning of regulation 7) by the designated person.
9N.—(1) To enable anything to be done by, or on behalf of, a relevant financial authority for the purposes of the functions of that authority.
F62(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F62Sch. 5 para. 9N(2) omitted (16.12.2022) by virtue of The Russia (Sanctions) (EU Exit) (Amendment) (No. 17) Regulations 2022 (S.I. 2022/1331), regs. 1(2)(b), 20(4)(b)
9O. To enable anything to be done to deal with an extraordinary situation.
9P. To enable anything to be done in connection with the performance of any humanitarian assistance activity.
9Q.—(1) To enable anything to be done in connection with the provision of medical goods or services for the benefit of the civilian population of a country.
(2) To enable the import, export or use of medical goods.
9R. To enable anything to be done in connection with the production or distribution of food for the benefit of the civilian population of a country.
9S.—(1) To enable anything to be done in order that the functions of a diplomatic mission or consular post in Russia, or of an international organisation enjoying immunities in accordance with international law may be carried out.
(2) To enable anything to be done in order that the functions of a diplomatic mission or consular post of Russia in the United Kingdom may be carried out.
9T. To enable anything to be done in order for a United Kingdom person to undertake spaceflight activity.]
Textual Amendments
F63Sch. 5 Pt. 1D inserted (1.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 5) Regulations 2022 (S.I. 2022/205), regs. 1(2), 7
9U. To enable anything to be done in connection with the performance of any humanitarian assistance activity.
9V.—(1) To enable anything to be done by, or on behalf of, a relevant financial authority for the purposes of the functions of that authority.
F64(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F64Sch. 5 para. 9V(2) omitted (16.12.2022) by virtue of The Russia (Sanctions) (EU Exit) (Amendment) (No. 17) Regulations 2022 (S.I. 2022/1331), regs. 1(2)(b), 20(4)(c)
9W. To enable anything to be done by a person, following consultation by that person (or a person acting on their behalf) with the Bank of England, that is necessary or expedient in order to protect or enhance the stability of the financial system of the United Kingdom.
9X. To enable anything to be done by a person, following consultation by that person (or a person acting on their behalf) with the relevant supervising authority or authorities, that is necessary or expedient in order to promote the safety and soundness of a firm which is supervised by the Bank of England, the Prudential Regulation Authority or the Financial Conduct Authority.
9Y. To enable anything to be done to deal with an extraordinary situation.]
Textual Amendments
F65Words in Sch. 5 Pt. 2 heading substituted (30.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 7) Regulations 2022 (S.I. 2022/395), regs. 1(2), 39(b)(i)
10.—(1) To enable anything to be done in order that the functions of a consular post in [F66non-government controlled Ukrainian territory], or of an international organisation enjoying immunities in accordance with international law, may be carried out.
F67(2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Textual Amendments
F66Words in Sch. 5 para. 10 substituted (30.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 7) Regulations 2022 (S.I. 2022/395), regs. 1(2), 39(b)(ii)(aa)
F67Sch. 5 para. 10(2) omitted (1.3.2022) by virtue of The Russia (Sanctions) (EU Exit) (Amendment) (No. 2) Regulations 2022 (S.I. 2022/194), regs. 1(2), 14(f)
Commencement Information
I40Sch. 5 para. 10 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
11. To enable the carrying out of projects exclusively in support of—
(a)hospitals, or other public health institutions providing medical services, or
(b)civilian education establishments, located in [F68non-government controlled Ukrainian territory].
Textual Amendments
F68Words in Sch. 5 para. 11 substituted (30.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 7) Regulations 2022 (S.I. 2022/395), regs. 1(2), 39(b)(ii)(bb)
Commencement Information
I41Sch. 5 para. 11 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
12. To enable anything to be done in relation to the provision or maintenance of appliances or equipment for medical use in [F69non-government controlled Ukrainian territory].U.K.
Textual Amendments
F69Words in Sch. 5 para. 12 substituted (30.3.2022 at 5.00 p.m.) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 7) Regulations 2022 (S.I. 2022/395), regs. 1(2), 39(b)(ii)(cc)
Commencement Information
I42Sch. 5 para. 12 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
13. To enable anything to be done for the urgent prevention or mitigation of an event likely to have a serious and significant impact on human health or safety, infrastructure or the environment.
Commencement Information
I43Sch. 5 para. 13 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(2)
Textual Amendments
F70Sch. 5 Pt. 3 inserted (19.7.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 12) Regulations 2022 (S.I. 2022/801), regs. 1(2), 10
14. To enable anything to be done to deal with an extraordinary situation.
15. To enable anything to be done in connection with the performance of any humanitarian assistance activity.
16.—(1) To enable anything to be done in connection with the provision of medical goods or services for the benefit of the civilian population of a country.
(2) To enable the import, export or use of medical goods.
17. To enable anything to be done in connection with the production or distribution of food for the benefit of the civilian population of a country.
18.—(1) To enable anything to be done in order that the functions of a diplomatic mission or consular post in Russia, or of an international organisation enjoying immunities in accordance with international law, may be carried out.
(2) To enable anything to be done in order that the functions of a diplomatic mission or consular post of Russia in the United Kingdom may be carried out.
19. To enable anything to be done by a person, following consultation by that person (or a person acting on their behalf) with the relevant supervising authority or authorities, that is necessary or expedient in order to promote the safety and soundness of a firm which is supervised by the Bank of England, the Prudential Regulation Authority or the Financial Conduct Authority.
20. To enable anything to be done for a United Kingdom person to undertake spaceflight activity.]
Textual Amendments
20A. To enable anything to be done to deal with an extraordinary situation.
20B. To enable anything to be done in connection with the performance of any humanitarian assistance activity.
20C.—(1) To enable anything to be done in connection with the provision of medical goods or services for the benefit of the civilian population of a country.
(2) To enable the import, export or use of medical goods.
20D. To enable anything to be done in connection with the production or distribution of food for the benefit of the civilian population of a country.
20E.—(1) To enable anything to be done in order that the functions of a diplomatic mission or consular post in Russia, or of an international organisation enjoying immunities in accordance with international law, may be carried out.
(2) To enable anything to be done in order that the functions of a diplomatic mission or consular post of Russia in the United Kingdom may be carried out.
20F. To enable anything to be done by a person, following consultation by that person (or a person acting on their behalf) with the relevant supervising authority or authorities, that is necessary or expedient in order to promote the safety and soundness of a firm which is supervised by the Bank of England, the Prudential Regulation Authority or the Financial Conduct Authority.
20G. To enable anything to be done by, or on behalf of, a relevant financial authority for the purposes of the functions of that authority.
20H. To enable anything to be done by a person, following consultation by that person (or a person acting on their behalf) with the Bank of England, that is necessary or expedient in order to protect or enhance the stability of the financial system of the United Kingdom.
20I.—(1) To enable the provision of trust services by the operator or trustee of an unauthorised unit trust scheme in relation to that scheme, provided that the condition in sub-paragraph (2) is met.
(2) The condition in this sub-paragraph is that the trust services are not provided primarily to or for the benefit of a designated person or a person connected with Russia.
(3) Terms used in this paragraph are to be construed in accordance with regulation 60ZZB.]
Textual Amendments
F72Sch. 5 Pt. 4 inserted (5.12.2022) by The Russia (Sanctions) (EU Exit) (Amendment) (No. 16) Regulations 2022 (S.I. 2022/1122), regs. 1(2), 17
21. To enable anything to be done to deal with an extraordinary situation.]
The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Whole Instrument without Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.
Would you like to continue?
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: