SCHEDULE 4U.K.Modifications to [F1Monitoring and Reporting Regulation 2018]

Textual Amendments

[F236.  Annex 2 is to be read as if—U.K.

(a)in section 2—

(i)in the first subparagraph before section 2.1—

(aa)for “all activities as listed in Annex I to Directive 2003/87/EC or included in the Union system under Article 24 of that Directive” there were substituted “all regulated activities”;

(bb)for “section 5” there were substituted “section 4”;

(ii)in the second subparagraph before section 2.1 for “sections 4 and 5” there were substituted “section 4”;

(iii)in section 2.4 in the subparagraph relating to Tier 1 for “competent authority or the Commission” there were substituted “UK ETS authority”;

(b)in section 4—

(i)for the heading there were substituted “Definition of tiers for the calculation factors forCO2 process emissions”;

(ii)for the subparagraph before section 4.1 (beginning “For all process emissions” and ending “from the process”) there were substituted—

“For all CO2 process emissions (including emissions from the decomposition of carbonates and from process materials containing carbon other than in the form of carbonates, including urea, coke and graphite), where they are monitored using the standard methodology in accordance with Article 24(2), the tiers defined in this section for the applicable calculation factors shall be applied.

In the case of mixed materials which contain inorganic as well as organic forms of carbon, the operator may choose:

—to determine a total preliminary emission factor for the mixed material by analysing the total carbon content, and using a conversion factor and – if applicable – biomass fraction and net calorific value related to that total carbon content; or

—to determine the organic and inorganic contents separately and treat them as two separate source streams.

For emissions from the decomposition of carbonates, the operator may choose for each source stream one of the following methods:

(a)Method A (Input based): The emission factor, conversion factor and activity data are related to the amount of material input into the process.

(b)Method B (Output based): The emission factor, conversion factor and activity data are related to the amount of output from the process.

For other CO2 process emissions, the operator shall apply only method A.”;

(iii)in section 4.1 in the subparagraph relating to Tier 1 for point (a) there were substituted—

“(a)the standard factors listed in Table 2 of Annex 6 in the case of carbonate decomposition or in Tables 1, 4 or 5 of that Annex for other process materials;”;

(iv)after section 4.4 there were inserted—

“4.5  Tiers for the net calorific value

If relevant, the operator shall determine the net calorific value (“NCV”) of the process material using the tiers defined in section 2.2 of this Annex. NCV is considered not relevant for marginal or de minimis source streams or where the material is not itself combustible without other fuels being added. If in doubt, the operator shall seek confirmation by the regulator on whether NCV has to be monitored and reported.

4.6  Tiers for the biomass fraction

If relevant, the operator shall determine the biomass fraction of the carbon contained in the process material using the tiers defined in section 2.4 of this Annex.”;

(c)section 5 were omitted.]

Textual Amendments