- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made).
23. This Part applies to and determines the amount of compensation for a person who is eligible under paragraph 7, but who also had a period of service before 1st April 2015 which entitled them to be an active member of AFPS 2005, and where there was either no gap between those periods of service, or any gap was 5 years or less.
24. In this Part—
(a)“AFRS 2006 relevant service”, in relation to a person, means service that would have counted as relevant service under the AFRS 2006 had the person been eligible for a payment under that scheme.
(b)“total service”, in relation to a person, means the sum of their redundancy qualifying service and their AFRS 2006 relevant service.
25.—(1) This paragraph applies to an eligible person who—
(a)had their service continued to the end of their commitment period, would have reached age 60 or become entitled to EDP 2015 payments, and
(b)actually ceases service before either reaching age 55 or becoming entitled to EDP 2005 payments,
and in this paragraph references to service are to redundancy qualifying service.
(2) The amount payable under paragraph 8(1) is comprised of an AFRS 2006 style payment and an AFRS 2020 style payment.
(3) The AFRS 2006 style payment is calculated as follows—
Step 1: If TS is less than or equal to 18, the result of step 1 is
If TS exceeds 18, the result of step 1 is
where—
F is final relevant earnings, and
TS is total service.
Step 2: take the result of step 1 and multiply by
where—
RS is AFRS 2006 relevant service, and
TS is total service.
(4) The AFRS 2020 style payment is calculated as follows—
Step 1: 10.2% x F x TS
where—
F is final relevant earnings, and
TS is total service (to be no more than 20).
Step 2: take the result of step 1, and multiply by
where—
Q is redundancy qualifying service, and
TS is total service.
26.—(1) This paragraph applies to an eligible person who—
(a)had their service continued to the end of their commitment period, would have reached age 60 or become entitled to EDP 2015 payments, and
(b)actually ceases service on or after reaching age 55 or becoming entitled to EDP 2005 payments, but before either reaching age 60 or becoming entitled to EDP 2015 payments,
and in this paragraph references to service are to redundancy qualifying service.
(2) The amount payable under paragraph 8(1) is comprised of an AFRS 2006 style payment and an AFRS 2020 style payment.
(3) The AFRS 2006 style payment is calculated as follows—
Step 1: If R is more than or equal to 4, .
where—
F is final relevant earnings, and
R is the number of years’ service the member had left to serve in their current commitment.
But if the person is entitled to a maximum pension as a member of AFPS 2005, step 1 can be no more than half of final relevant earnings.
Step 2: take the result of step 1, and multiply by
where—
RS is AFRS 2006 relevant service, and
TS is total service.
(4) The AFRS 2020 style payment is calculated as follows—
Step 1: If TS is less than or equal to 20, the result of step 1 is 10.2% x F x TS
If TS is more than 20, the result of step 1 is 10.2% x F x 20
where—
F is final relevant earnings, and
TS is total service.
Step 2: take the result of step 1 and multiply by
where—
Q is redundancy qualifying service, and
TS is total service.
27.—(1) This paragraph applies to an eligible person who—
(a)had their service continued to the end of their commitment period, would have reached age 60 or become entitled to EDP 2015 payments, and
(b)actually ceases service on or after either reaching age 60 or becoming entitled to EDP 2015 payments,
and in this paragraph references to service are to redundancy qualifying service.
(2) The amount payable under paragraph 8(1) comprises an AFRS 2006 style payment and an AFRS 2020 style payment.
(3) The AFRS 2006 style payment is calculated as follows—
Step 1: If R is more than or equal to 4, the result of step 1 is
If R is less than 4, the result of step 1 is
where—
F is final relevant earnings, and
R is the number of remaining years that the member had left to serve in their commitment.
But if the person is entitled to a maximum pension as a member of the AFPS 2005, step 1 can be no more than half of final relevant earnings.
Step 2: take the result of step 1 and multiply by
Where—
RS is the person’s AFRS 2006 relevant service, and
TS is total service.
(4) The AFRS 2020 style payment is calculated as follows—
Step 1: If R is more than 4, the result of step 1 is
If R is less than or equal to 4, the result of step 1 is
where—
F is final relevant earnings, and
R is the number of remaining years that the member had left to serve in their commitment.
Step 2: take the result of step 1 and multiply by
where—
Q is redundancy qualifying service, and
TS is total service.
28.—(1) This paragraph applies to an eligible person who—
(a)had their service continued to the end of their commitment period, would have reached age 55 or become entitled to EDP 2005 payments but would not have reached age 60 or become entitled to EDP 2015 payments, and
(b)actually ceases service before either reaching age 55 or becoming entitled to EDP 2005 payments,
and in this paragraph references to service are to redundancy qualifying service.
(2) The amount payable under paragraph 8(1) is comprised of an AFRS 2006 style payment and an AFRS 2020 style payment.
(3) The AFRS 2006 style payment is calculated as follows—
Step 1: If TS is less than or equal to 18, the result of step 1 is
If TS exceeds 18, the result of step 1 is
where—
F is final relevant earnings, and
TS is total service.
Step 2: take the result of step 1 and multiply by
where—
RS is AFRS 2006 relevant service, and
TS is total service.
(4) The AFRS 2020 style payment is calculated as follows—
Step 1: Take the lower of—
(a)10.2% x F x TS, and
(b)(10.2% x F x R) + (10.2% x F)
where—
F is final relevant earnings,
R is the number of remaining years that the member had left to serve in their commitment, and
TS is total service.
Step 2: take the result of step 1 and multiply by
where—
Q is redundancy qualifying service, and
TS is total service.
29.—(1) This paragraph applies to an eligible person who—
(a)had their service continued to the end of their commitment period, would have reached age 55 or become entitled to EDP 2005 payments but who would not have reached age 60 or become entitled to EDP 2015 payments, and
(b)actually ceases service on or after either reaching age 55 or becoming entitled to EDP 2005 payments but before either reaching age 60 or becoming entitled to EDP 2015 payments,
and in this paragraph references to service are to redundancy qualifying service.
(2) The amount payable under paragraph 8(1) is comprised of an AFRS 2006 style payment and an AFRS 2020 style payment.
(3) The AFRS 2006 style payment is calculated as follows—
Step 1: If R is more than or equal to 4, the result of step 1 is
If R is less than 4, the result of step 1 is
where—
F is final relevant earnings, and
R is the number of remaining years that the member had left to serve in their commitment.
But if the person is entitled to a maximum pension as a member of AFPS 2005, step 1 can be no more than half of final relevant earnings.
Step 2: take the result of step 1 and multiply by
where—
RS is AFRS 2006 relevant service, and
TS is total service.
(4) The AFRS 2020 style payment is calculated as follows—
Step 1: Take the lower of—
(a)10.2% x F x TS, and
(b)(10.2% x F x R) + (10.2% x F)
where—
F is final relevant earnings,
R is the number of remaining years that the member had left to serve in their commitment, and
TS is total service.
Step 2: take the result of step 1 and multiply by
where—
Q is redundancy qualifying service, and
TS is total service.
30.—(1) This paragraph applies to an eligible person who—
(a)had their service continued to the end of their commitment period, would not have reached age 55 or become entitled to EDP 2005 payments, and
(b)actually ceases service before either reaching age 55 or becoming entitled to EDP 2005 payments,
and in this paragraph references to service are to redundancy qualifying service.
(2) The amount payable under paragraph 8(1) is comprised of an AFRS 2006 style payment and an AFRS 2020 style payment.
(3) The AFRS 2006 style payment is calculated as follows—
Step 1: Take the lower of—
where—
F is final relevant earnings, and
TS is total service.
Step 2: take the result of step 1 and multiply by
where—
RS is AFRS 2006 relevant service, and
TS is total service.
(4) The AFRS 2020 style payment is calculated as follows—
Step 1: Take the lower of—
(a)10.2% x F x TS, and
(b)(10.2% x F x R) + (10.2% x F)
where—
F is final relevant earnings,
R is the number of remaining years that the member had left to serve in their commitment, and
TS is total service.
Step 2: take the result of step 1 and multiply by
where—
Q is redundancy qualifying service, and
TS is total service.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: