- Latest available (Revised)
- Point in Time (31/12/2020)
- Original (As made)
Point in time view as at 31/12/2020.
There are currently no known outstanding effects for the The Construction Products (Amendment etc.) (EU Exit) Regulations 2020, SCHEDULE 2.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Regulation 3
Commencement Information
For Schedule 2 (amendments to the 2013 Regulations) to the 2019 Regulations substitute—
Regulation 4
1. The 2013 Regulations are amended in accordance with paragraphs 2 to 14 of this Schedule.
2. After regulation 1 insert—
1A. These Regulations apply in England and Wales, and Scotland.”.
3.—(1) Regulation 2 (interpretation) is amended as follows.
(2) In paragraph (1)—
(a)in the appropriate places insert the following definitions—
““the EU Construction Products Regulation” means Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC as it has effect in EU law as amended from time to time;”;
““UK(NI) indication” means the marking in the form set out in Schedule 1 to the Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020;”;
(b)for the definition of “enforcement authority” substitute—
““enforcement authority” means any local weights and measures authority;”.
(3) In paragraph (2), after “the United Kingdom” insert “in respect of Great Britain”;
(4) Omit paragraph (3).
4. In regulation 3(1) (competent authority)—
(a)in the words before sub-paragraph (a)—
(i)after “for the United Kingdom” insert “in respect of Great Britain”; and
(ii)omit “of the 2008 Regulation, as it applies to construction products, and”;
(b)in sub-paragraph (b) omit “United Kingdom”.
5. For regulation 4 (prohibition on supply etc.) substitute—
4.—(1) A person who supplies a construction product in respect of Great Britain that is covered by a designated standard or conforms to a UK Technical Assessment that has been issued for it shall be guilty of an offence unless—
(a)there is supplied with the product in accordance with Article 7 of the 2011 Regulation a declaration of performance for the product drawn up in accordance with Articles 4 and 6 of the 2011 Regulation; and
(b)the product has affixed to it the UK marking in accordance with Article 8(1) of the 2011 Regulation.
(2) Paragraph (1) does not apply in the case of a product that is subject to one or more of the derogations in Article 5 of the 2011 Regulation.
(3) Paragraph (1) does not apply where—
(a)Article 16A(2) of the 2011 Regulation applies;
(b)there is supplied with the product in accordance with Article 7 of the 2011 Regulation (as modified by Article 16A(3) of that Regulation) a declaration of performance for the product drawn up in accordance with Articles 4 and 6 of the EU Construction Products Regulation; and
(c)the product has affixed to it—
(i)the CE marking; or
(ii )the CE marking accompanied by the UK(NI) indication,
in accordance with Article 8(2) of the EU Construction Products Regulation.
(4) A person who supplies a construction product in respect of Great Britain to which the UK marking has been affixed in breach of any provision of Article 8 or 9 of the 2011 Regulation shall be guilty of an offence.
(5) A person who supplies a construction product in respect of Great Britain to which—
(a)the CE marking; or
(b)the CE marking and accompanying UK(NI) indication,
has been affixed in breach of any provision of Article 8 or 9 of the EU Construction Products Regulation shall be guilty of an offence.
(6) A person guilty of an offence under this regulation shall be liable on summary conviction to imprisonment for a term not exceeding three months or to a fine not exceeding level 5 on the standard scale or to both.”.
6. Omit regulation 7(4)(b) (ground for further suspension notice).
7. In regulation 8 (forfeiture)—
(a)in the heading omit “and Northern Ireland”;
(b)in paragraph (1) omit “or Northern Ireland”;
(c)in paragraph (5)—
(i)omit “or Northern Ireland”;
(ii)omit sub-paragraph (b);
(iii)omit “or Article 146 of the Magistrates’ Courts (Northern Ireland) Order 1981 (cases stated by magistrates’ courts)”.
8. In regulation 14 (enforcement) omit paragraph (3).
9. In regulation 17 (provisions supplemental to regulation 16) omit paragraph (7).
10. In regulation 19 (condition for an order requiring products to be released)—
(a)in paragraph (2)(a) omit “or Northern Ireland”;
(b)in paragraph (3) omit sub-paragraph (b);
(c)in paragraph (4)—
(i)omit “or Northern Ireland”;
(ii)omit sub-paragraph (b);
(iii)omit “or Article 146 of the Magistrates’ Courts (Northern Ireland) Order 1981 (cases stated by magistrates’ courts)”.
11. In regulation 22—
(a)in paragraph (3)(b)(iii) (exception to the restriction on the disclosure of information) for “an” substitute “a retained”;
(b)in paragraph (6), in the definition of “relevant person”, omit “or Northern Ireland department” and “or, in Northern Ireland, any district council”.
12. In regulation 26, omit paragraph (3).
13.—(1) Schedule 1 (grounds for service of notices in relation to the 2008 Regulation and the 2011 Regulation) is amended as follows.
(2) In paragraph 2(b), (c), (e) and (f), omit “national”.
(3) In paragraph 4, after “Article 29(1)” delete the explanatory text in brackets.
(4) In paragraph 5 after “Article 29(2)” delete the explanatory text in brackets.
(5) In paragraph 6—
(a)in sub-paragraph (a), after “Article 56(1)” delete the explanatory text in brackets;
(b)in sub-paragraph (b), omit “or (8)” and the “or” at the end;
(c)at the end of sub-paragraph (c), for the full stop substitute “; or”;
(d)after sub-paragraph (c), insert—
“(d)Article 59B(2) (other non-compliance in relation to the EU Construction Products Regulation) of the 2011 Regulation.”.
(6) Omit paragraph 7.
(7) In paragraph 8, after “(formal non-compliance)” insert “or 59A(2) (formal non-compliance in relation to the EU Construction Products Regulation)”.
14. In Schedule 2 (suspension notices)—
(a)in paragraph 6 omit “or Northern Ireland”;
(b)in paragraph 7—
(i)omit “or Northern Ireland”;
(ii)at the end of sub-paragraph (a), insert “and”;
(iii)at the end of sub-paragraph (b), for “; and” substitute a full stop;
(iv)omit sub-paragraph (c);
(c)in paragraph 8—
(i)at the end of sub-paragraph (a), insert “and”;
(ii)at the end of sub-paragraph (b), for “; and” substitute a full stop;
(iii)omit sub-paragraph (c);
(d)in paragraph 9—
(i)omit “or Northern Ireland”;
(ii)omit sub-paragraph (b);
(iii)omit “or Article 146 of the Magistrates’ Courts (Northern Ireland) Order 1981 (cases stated by magistrates’ courts)”.
(e)in paragraph 11—
(i)at the end of sub-paragraph (a), for the semi-colon substitute a full stop;
(ii)omit sub-paragraphs (b) and (c).
15. In Schedule 3 (prohibition notices), in paragraph 7—
(a)at the end of sub-paragraph (a), for the semi-colon substitute a full stop;
(b)omit sub-paragraphs (b) and (c).
16. In Schedule 4 (notices to warn), in paragraph 5—
(a)at the end of sub-paragraph (a), for the semi-colon substitute a full stop;
(b)omit sub-paragraphs (b) and (c).”.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: