- Latest available (Revised)
- Point in Time (30/12/2020)
- Original (As made)
Version Superseded: 31/12/2020
Point in time view as at 30/12/2020. This version of this part contains provisions that are not valid for this point in time.
There are currently no known outstanding effects for the The Customs (Transitional) (EU Exit) Regulations 2020,
PART 3
.
Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.
Valid from 31/12/2020
11.—(1) The import duty regulations are amended as follows.
(2) In regulation 2 (interpretation)—
(a)for the definition of “Customs obligation” substitute—
““Customs obligation” means any obligation or requirement imposed by or under—
(a)the Act in relation to a duty of customs;
(b)CEMA 1979;
(c)the EU Customs Code as it had effect in the United Kingdom before IP completion day; or
(d)after IP completion day—
(i)the EU Customs Code as it has effect in Northern Ireland;
(ii)the EU Customs Code as it has effect in Great Britain, except the EUCL;
(iii)the EUCL insofar as it continues to have effect as provided for by Part 15 of these Regulations or the Customs (Transitional) (EU Exit) Regulations 2020 M1; or
(iv)the EU Customs Code to the extent that is has effect in the United Kingdom as a result of the EU withdrawal agreement;”;
(b)in the definition of “EU Customs Code” —
(i)omit “and” at the end of paragraph (b);
(ii)at the end of paragraph (c) insert “ and ”;
(iii)after paragraph (c) insert—
“(d)Commission Delegated Regulation (EU) 2016/341 of 17 December 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards transitional rules for certain provisions of the Union Customs Code where the relevant electronic systems are not yet operational and amending Delegated Regulation (EU) 2015/2446;”.
(3) In regulation 81 (transitional provision: declarations made before exit day) for “exit day”, in each place it occurs, substitute “ IP completion day ”.
(4) In regulation 86(4)(a)(i) (cases in which an application for approval may not be made) for “exit day” substitute “ IP completion day ”.
(5) In regulation 92 (transitional provisions - approval or authorisation granted before exit day)—
(a)for “exit day”, in each place it occurs, substitute “ IP completion day ”;
(b)in paragraph (3)—
(i)omit the “or” at the end of sub-paragraph (a);
(ii)after sub-paragraph (b) insert—
“(c)in relation to the EU withdrawal agreement; or
(d)in relation to the Customs (Transitional) (EU Exit) Regulations 2020 M2.”.
(6) In regulation 99(1)(d)(ii) (specified amount: waivers) for “exit day” substitute “ IP completion day ”.
(7) In regulation 143 (interpretation) omit “temporary storage facility”.
(8) In regulation 144 (continued effect and cessation of the EUCL)—
(a)for “exit day”, in each place it occurs, substitute “ IP completion day ”;
(b)in paragraph (3)(a)(iii) omit “except as provided by regulation 150(3),”.
(9) In regulation 145 (evidence required by notice) for “exit day” substitute “ IP completion day ”.
(10) In the heading to Chapter 3 of Part 15 for “Exit Day” substitute “ IP completion day ”.
(11) In regulation 146 (transitional and saving provision under Chapter 3)—
(a)in paragraph (1)—
(i)in sub-paragraph (a) for “exit day; and” substitute “ IP completion day; ”
(ii)at the end of sub-paragraph (b) insert “ ; and ”;
(iii)after sub-paragraph (b) insert—
“(c)are not subject to Article 49 of the EU withdrawal agreement.”;
(b)in paragraph (3) for “exit day”, in each place it occurs, substitute “ IP completion day ”.
(12) In regulation 147 (goods notified as arriving) for “exit day”, in each place it occurs, substitute “ IP completion day ”.
(13) Omit regulation 148 (goods held in a temporary storage facility).
(14) In regulation 149 (goods declared to a customs procedure) for “exit day”, in each place it occurs, substitute “ IP completion day ”.
(15) Omit regulation 150 (goods located in the United Kingdom released to a special procedure).
(16) For the heading to Chapter 4 of Part 15 substitute “ End-use procedure ”.
(17) Omit regulations 151 (transit procedure) and 152 (outward processing procedure).
(18) In regulation 153 (End-use procedure)—
(a)for “exit day”, in each place it occurs, substitute “ IP completion day ”;
(b)in paragraph (1)—
(i)omit the “and” at the end of sub-paragraph (a)(ii);
(ii)at the end of sub-paragraph (b) insert “ ; and ”;
(iii)after sub-paragraph (b) insert—
“(c)the goods are not subject to the EU withdrawal agreement.”.
(19) In regulation 155 (cessation of effect of the EUCL)—
(a)for “exit day”, in each place it occurs, substitute “ IP completion day ”;
(b)in paragraph (2)(b) omit “except in relation to goods to which regulation 152 applies,”.
(20) In regulation 156 (goods located outside the United Kingdom)—
(a)for “exit day”, in each place it occurs, substitute “ IP completion day ”;
(b)in paragraph (1)—
(i)omit the “and” at the end of sub-paragraph (a)(ii);
(ii)at the end of sub-paragraph (b) insert “ ; and ”;
(iii)after sub-paragraph (b) insert—
“(c)the goods are not subject to the EU withdrawal agreement.”.
(21) In regulation 157(1) (goods discharged from a customs procedure) for “exit day” substitute “ IP completion day ”.
(22) Omit Chapter 7 of Part 15.
Valid from 31/12/2020
12.—(1) The special procedure regulations are amended as follows.
(2) In regulation 2 (interpretation)—
(a)for the definition of “Customs obligation” substitute—
““Customs obligation” has the same meaning as in regulation 2 of the Customs (Import Duty) (EU Exit) Regulations 2018 M3;”;
(b)in the definition of “EU Customs Code” —
(i)omit “and” at the end of paragraph (b);
(ii)at the end of paragraph (c) insert “ and ”;
(iii)after paragraph (c) insert—
“(d)Commission Delegated Regulation (EU) 2016/341 of 17 December 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards transitional rules for certain provisions of the Union Customs Code where the relevant electronic systems are not yet operational and amending Delegated Regulation (EU) 2015/2446;”.
Commencement Information
I2Reg. 12 not in force at made date, see reg. 1(2)
Marginal Citations
M3S.I. 2018/1248. There are amending instruments, but none are relevant.
Valid from 31/12/2020
13.—(1) The Customs (Export) (EU Exit) Regulations 2019 M4 are amended as follows.
(2) Omit regulation 57(2)(a) (disclosure of appointment).
(3) In regulation 64 (continued effect and cessation of effect of the EUCL)—
(a)before paragraph (1) insert—
“(A1) This part applies in relation to goods which are not subject to Article 49 of the EU withdrawal agreement.”;
(b)for “exit day”, in each place it occurs, substitute “ IP completion day ”.
(4) In regulation 65 (evidence required by notice) for “exit day”, in each place it occurs, substitute “ IP completion day ”.
(5) In regulation 66 (verification)—
(a)for “exit day”, in each place it occurs, substitute “ IP completion day ”;
(b)in paragraph (2) for sub-paragraph (c) substitute—
“(c)the end of the period of one year from IP completion day.”.
(6) In Part 11 (transitional and savings provisions) omit—
(a)Chapter 3 (export procedure and re-export);
(b)Chapter 4 (cessation of effect of EUCL);
(c)Chapter 5 (union goods moving out of the United Kingdom).
Commencement Information
I3Reg. 13 not in force at made date, see reg. 1(2)
Marginal Citations
M4S.I. 2019/108. Relevant amending instrument is S.I. 2019/486.
14.—(1) The Customs (Import Duty, Transit and Miscellaneous Amendments) (EU Exit) Regulations 2019 M5 are amended as follows.
(2) In regulation 5(2) (amendment of the Customs (Temporary Storage Facilities Approval Conditions and Miscellaneous Amendments) (EU Exit) Regulations 2018) in the text inserted as paragraph 5 to Schedule 1—
(a)for the definition of “Customs obligation” substitute—
““Customs obligation” has the same meaning as in regulation 2 of the Customs (Import Duty) (EU Exit) Regulations 2018 M6;”;
(b)in the definition of “EU Customs Code”—
(i)omit the “and” at the end of paragraph (b);
(ii)at the end of paragraph (c) insert “ and ”;
(iii)after paragraph (c) insert—
“(d)Commission Delegated Regulation (EU) 2016/341 of 17 December 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards transitional rules for certain provisions of the Union Customs Code where the relevant electronic systems are not yet operational and amending Delegated Regulation (EU) 2015/2446;”.
Commencement Information
I4Reg. 14 in force at 30.12.2020, see reg. 1(3)(b)
Marginal Citations
M5S.I. 2019/326. There are amending instruments, but none are relevant.
M6S.I. 2018/1248. There are amending instruments, but none are relevant.
Valid from 31/12/2020
15.—(1) The Customs (Crown Dependencies Customs Union) (EU Exit) Regulations 2019 M7 are amended as follows.
(2) In regulation 5 omit paragraphs (14) and (17).
(3) In regulation 6 omit paragraphs (5) and (6).
16.—(1) The Taxation (Cross-border Trade) (Miscellaneous Provisions) (EU Exit) Regulations 2019 M8 are amended as follows.
(2) In regulation 6 (amendment to the import duty regulations)—
(a)omit paragraph (27);
(b)in paragraph (28)(b) in the text substituted for sub-paragraph (f) for “ exit day ” substitute “IP completion day”;
(c)omit paragraph (29).
Commencement Information
I6Reg. 16 in force at 30.12.2020, see reg. 1(3)(c)
Marginal Citations
M8S.I. 2019/486. Relevant amending instrument is 2019/1215.
17.—(1) The Customs and Excise (Miscellaneous Provisions and Amendments) (EU Exit) Regulations 2019 M9 are amended as follows.
(2) In regulation 6(5) (requirement to provide a banana weight certificate)—
(a)in the definition of “a Banana Weight Certificate previously issued” for “exit day” substitute “ IP completion day ”;
(b)in the definition of “EU Customs Code”—
(i)omit the “and” at the end of paragraph (b);
(ii)at the end of paragraph (c) insert “ and ”;
(iii)after paragraph (c) insert—
“(d)Commission Delegated Regulation (EU) 2016/341 of 17 December 2015 supplementing Regulation (EU) No 952/2013 of the European Parliament and of the Council as regards transitional rules for certain provisions of the Union Customs Code where the relevant electronic systems are not yet operational and amending Delegated Regulation (EU) 2015/2446;”.
(3) In regulation 7(3) (reviews and appeals) in the definition of “EU Customs legislation” for “exit day”, in each place it occurs, substitute “ IP completion day ”.
(4) In regulation 11 (amendment to the import duty regulations)—
(a)in paragraph (25) in the text substituted for “ 29th March 2020 ” for “exit day” substitute “ IP completion day ”;
(b)in paragraph (26) in the text substituted for sub-paragraph (c) for “ exit day ” substitute “IP completion day”.
(5) In regulation 12(6)(b) (amendment of the special procedure regulations) in the text substituted for regulation 11(6) for “ exit day ” substitute “IP completion day”.
Commencement Information
I7Reg. 17 in force at 30.12.2020, see reg. 1(3)(d)
Marginal Citations
M9S.I. 2019/1215. There are amending instruments, but none are relevant.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Point in Time: This becomes available after navigating to view revised legislation as it stood at a certain point in time via Advanced Features > Show Timeline of Changes or via a point in time advanced search.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: