- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
16.—(1) Commission Regulation (EU) 2019/1782 of 1 October 2019 laying down ecodesign requirements for external power supplies pursuant to Directive 2009/125/EC of the European Parliament and of the Council and repealing Commission Regulation (EC) No 278/2009 is amended as follows.
(2) In Article 2 (definitions)—
(a)for “For the purposes of this Regulation, the following definitions shall apply:” substitute—
“For the purposes of this Regulation, the definitions set out in the 2010 Regulations apply. The following definitions also apply—”;
(b)after point (19) insert—
“(20) ‘the 2010 Regulations’ means the Ecodesign for Energy-Related Products Regulations 2010;
(21) ‘market surveillance’ and ‘market surveillance authority’ have the meanings set out in Article 2 of RAMS.”.
(3) In Article 4 (conformity assessment)—
(a)for paragraph 1, substitute—
“1. For the purposes of regulation 4(2)(a) of the 2010 Regulations, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control procedure set out in Part 1 of Schedule 1A to those Regulations, or the management system procedure set out in Part 2 of that Schedule.”;
(b)in paragraph 2, for “Article 8 of Directive 2009/125/EC” substitute “regulation 4(2)(a) of the 2010 Regulations”.
(4) For Article 5 (verification procedure for market surveillance purposes) substitute—
“5. When performing market surveillance checks to assess compliance with the requirements set out in this Regulation, the market surveillance authority must apply the verification procedure described in Annex 3.”.
(5) Omit Article 7 (review).
(6) After Article 9 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States”.
(7) In paragraph 3 of Annex 2 (measurements and calculations), for the words from “harmonised” to “Union” substitute “designated standards”.
(8) In Annex 3 (verification procedure for market surveillance purposes)—
(a)for each occurrence of “the Member State authorities”, substitute “the market surveillance authority”;
(b)in the first paragraph, for “Member State authorities”, substitute “the market surveillance authority”;
(c)for the second paragraph, substitute—
“When verifying the compliance of a product model with the requirements laid down in this Regulation, the market surveillance authority must apply the following procedure—”;
(d)in point 2(a)—
(i)for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “paragraph 1(2) of Part 1 of Schedule 1A to the 2010 Regulations”; and
(ii)for “paragraph (g) thereof” substitute “paragraph 1(2)(b)(vii) of that Schedule”;
(e)omit point 7;
(f)in the final paragraph before Table 1—
(i)for “points 1 to 7” substitute “points 1 to 6”; and
(ii)for “harmonised standards” substitute “designated standards”.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: