Statutory Instruments

2020 No. 1549

Public Health, England

The Health Protection (Coronavirus, Testing Requirements and Standards) (England) Regulations 2020

Made

16th December 2020

Coming into force

17th December 2020

M1The Secretary of State makes these Regulations in exercise of the powers conferred by sections 45C(1) and (3)(c), 45F(2) and 45P(2) of the Public Health (Control of Disease) Act 1984 .

A draft of this instrument was laid before Parliament in accordance with section 45Q(4) of that Act and approved by a resolution of each House of Parliament.

The Secretary of State considers that the requirements imposed by these Regulations are proportionate to what they seek to achieve, which is a public health response to the serious and imminent threat to public health which is posed by the incidence and spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) in England.

Modifications etc. (not altering text)

Marginal Citations

M11984 c. 22; Part 2A was inserted by section 129 of the Health and Social Care Act 2008 (c.14).

Citation, commencement and applicationE+W

1.—(1) These Regulations may be cited as the Health Protection (Coronavirus, Testing Requirements and Standards) (England) Regulations 2020 and come into force on the day after the day on which they are made.

(2) These Regulations apply to England only.

Commencement Information

I1Reg. 1 in force at 17.12.2020, see reg. 1(1)

InterpretationE+W

2.  In these Regulations—

“administer”, in relation to an applicable test, means the collecting of a sample to be tested from the individual who is the subject of the test;

“applicable test” means a test to which regulation 3 applies;

“test provider” means a person who provides an applicable test;

“UKAS” means the United Kingdom Accreditation Service, a company limited by guarantee and incorporated in England and Wales under number 3076190 M2.

Commencement Information

I2Reg. 2 in force at 17.12.2020, see reg. 1(1)

Marginal Citations

M2See S.I. 2009/3155 for the functions of UKAS.

Applicable testsE+W

3.—(1) An applicable test is a test for the detection of coronavirus which is—

(a)provided in a single end-to-end testing service (whether or not the provider arranges with another person (“X”) for X to provide one or more elements of the service on their behalf);

(b)provided in the course of a business;

(c)not a test provided or administered under the National Health Service Act 2006 M3;

(d)not a test provided by a person (P) solely to—

(i)P's employees;

(ii)persons contracted to provide services to P; or

(iii)both of the above; and

(e)administered on or after 1st January 2021.

(2) In this regulation—

(a)“coronavirus” means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

(b)“single end-to-end testing service” means a service which comprises arranging to provide the test to the person to be tested, collecting and processing the sample to be tested, and providing the test result to that person.

Commencement Information

I3Reg. 3 in force at 17.12.2020, see reg. 1(1)

Marginal Citations

Test requirementsE+W

4.—(1) Any device used for the purposes of an applicable test must meet the following requirements—

(a)it can be put into service in accordance with Part 4 of the Medical Devices Regulations 2002 M4, other than solely by virtue of regulation 39(2) of those Regulations;

(b)it has been validated no more than 18 months before the test is administered.

(2) In this regulation “validated”, in relation to a device, means confirmed by—

(a)the Secretary of State;

(b)the National Institute for Health and Care Excellence M5; or

(c)a laboratory which is accredited by UKAS to ISO standard 15189 M6 or ISO/IEC standard 17025 M7, other than a laboratory which processes tests provided by the test provider or is owned by the test provider,

as having the levels of sensitivity and specificity stated by the manufacturer.

(3) In this regulation—

(a)“device” means an in vitro diagnostic medical device within the meaning given in regulation 2(1) of the Medical Devices Regulations 2002;

(b)“sensitivity”, in relation to a device, means how often the device correctly generates a positive result;

(c)“specificity”, in relation to a device, means how often the device correctly generates a negative result.

Commencement Information

I4Reg. 4 in force at 17.12.2020, see reg. 1(1)

Marginal Citations

M4S.I. 2002/618, as amended by S.I. 2003/1697. Further amendments are prospectively made by S.I. 2019/791 with effect from 1st January 2021. There are other amending instruments not relevant to these Regulations.

M5A body corporate established under section 232 of the Health and Social Care Act 2012 (c. 7).

M6ISO standards are published in Geneva by the International Organisation for Standardisation, and are available on their website (www.iso.org) or at ISO Central Secretariat, International Organization for Standardization (ISO), 1 rue de Varembé, Case postale 56, CH-1211, Geneva 20, Switzerland. ISO 15189 Medical Laboratories requirements for quality and competence was published in November 2012.

M7ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories was published in November 2017.

Provider requirementsE+W

5.—(1) A test provider must meet the following requirements in respect of any applicable test that they provide.

(2) The test provider must ensure that a registered medical practitioner has oversight and approval of medical practices undertaken by the test provider, and responsibility for reporting medical issues.

(3) The test provider must have an effective system of clinical governance in place which includes appropriate standard operating procedures in relation to the carrying out of applicable tests.

(4) The test provider must ensure that a registered clinical scientist has oversight of clinical practices undertaken by the test provider, and responsibility for reporting clinical issues.

(5) The test provider must have systems in place to—

(a)identify any adverse incidents or quality control issues in relation to applicable tests, and

(b)report any such incidents or issues as soon as reasonably practicable to the Secretary of State.

(6) If the test provider arranges with another person (“X”) for X to carry out any element of the testing service on their behalf, the test provider must ensure that X complies with any provision of this regulation that is relevant to the carrying out of that element.

(7) In this regulation “registered clinical scientist” means a person registered as a clinical scientist with the Health and Care Professions Council pursuant to article 5 of the Health Professions Order 2001 M8.

Commencement Information

I5Reg. 5 in force at 17.12.2020, see reg. 1(1)

Marginal Citations

M8S.I. 2002/254. There are amendments not relevant to these Regulations.

UKAS accreditationE+W

6.—(1) Before providing an applicable test, a test provider must—

(a)make a valid application to UKAS for accreditation to the relevant ISO standard; and

(b)make a declaration to the Secretary of State that they meet the minimum standards for private sector-provided testing published by the Department of Health and Social Care for that purpose on 25th November 2020M9, (“stage one”).

(2) The declaration referred to in paragraph (1)(b) must be made on the on-line portal provided by the Department of Health and Social Care at the following web page—

https://support-covid-19-testing.dhsc.gov.uk/PrivateSectorSelfDeclaration.

[F1(2A) For the purposes of this regulation—

(a)a test provider who completes stage one on or before 31st December 2020 is a “first channel test provider”;

(b)a test provider who completes stage one on or after 1st January 2021 is a “second channel test provider”.]

(3) A [F2first channel] test provider F3... must, before 31st January 2021, comply with the requirements published by UKAS on 24th November 2020 in relation to accreditation to the relevant ISO standardM10 (“stage two”).

(4) A [F4second channel] test provider F5... must complete stage two on or before whichever is the later of—

(a)31st January 2021; or

(b)the date four weeks after the date on which they completed stage one.

[F6(5A) A first channel test provider who does not achieve a positive recommendation on or before 30th June 2021 must not provide applicable tests.

(5B) A second channel test provider who does not achieve a positive recommendation on or before whichever is the later of—

(a)30th June 2021, or

(b)the date four months after the date on which they completed stage two

must not provide applicable tests.

(5C) A test provider who does not achieve a positive recommendation by the date in paragraph (5A) or the appropriate date in paragraph (5B) (as applicable) may provide applicable tests after they have achieved a positive recommendation.

(6A) A first channel test provider who is not accredited by UKAS to the relevant ISO standard by 31st August 2021 must not provide applicable tests.

(6B) A second channel test provider who is not accredited by UKAS by the later of—

(a)31st August 2021, or

(b)the date two months after the appropriate date in paragraph (5B)

must not provide applicable tests.

(6C) A test provider who is not accredited by UKAS by the date in paragraph (6A) or the appropriate date in paragraph (6B) (as applicable) may provide applicable tests after they have been accredited by UKAS.]

(7) Subject to paragraph (9), a test provider must cease to provide applicable tests if they have not—

(a)completed stage two by the date specified in paragraph (3) or (4), as applicable [F7.]

F8(b). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(8) If the test provider arranges with another person (“X”) for X to carry out any element of the testing service on their behalf, the test provider must—

(a)ensure that X complies with any provision of this regulation that is relevant to the carrying out of that element; and

(b)subject to paragraph (10), cease to provide applicable tests under arrangement with X if X fails to comply with any such provision.

(9) Paragraph (7) does not apply to an applicable test that was administered [F9or provided] before the dates referred to in that paragraph.

(10) Paragraph (8)(b) does not apply to an applicable test that was administered [F10or provided] before the date that X failed to comply with this regulation.

(11) In this regulation “the relevant ISO standard” means—

(a)in the case of a test which requires laboratory processing, ISO standard 15189 or ISO/IEC standard 17025; and

(b)in the case of a point of care test, ISO standard 15189 and ISO standard 22870M11, and for this purpose “point of care test” means a test processed outside a laboratory environment.

[F11(12) In this regulation a “positive recommendation” means a written notice from UKAS which—

(a)reports UKAS’s assessment of the test provider’s readiness to be fully accredited, and

(b)informs the test provider of any actions the provider must take in order to be fully accredited,

where “fully accredited” means accredited by UKAS to the relevant ISO standard.]

Textual Amendments

Modifications etc. (not altering text)

Commencement Information

I6Reg. 6 in force at 17.12.2020, see reg. 1(1)

Marginal Citations

M9See https://www.gov.uk/guidance/self-declare-as-a-private-sector-covid-19-testing-provider. Hard copies of the standards are not available but a print-out may be obtained from Ministerial Correspondence and Public Enquiries Unit, Department of Health and Social Care, 39 Victoria Street, London, SW1H 0EU.

M10http://www.ukas.com/C19-Stage2-UKAS-Appraisal. Hard copies are not available but a print-out may be obtained from the Department of Health and Social Care at the above address.

M11ISO 22870 Point-of-care testing (POCT) requirements for quality and competence was published in November 2016.

Offence and penaltiesE+W

7.—(1) A test provider commits an offence if, without reasonable excuse, they contravene a requirement imposed under regulation 4, 5 or 6.

(2) An offence under this regulation is punishable on summary conviction by a fine.

Commencement Information

I7Reg. 7 in force at 17.12.2020, see reg. 1(1)

ReviewE+W

8.  The Secretary of State must review the effectiveness of the provisions made by these Regulations before the expiry of the period of six months beginning with the day after the day on which they come into force.

Commencement Information

I8Reg. 8 in force at 17.12.2020, see reg. 1(1)

Signed by authority of the Secretary of State for Health and Social Care.

Bethell

Parliamentary Under-Secretary of State,

Department of Health and Social Care

Explanatory Note

(This note is not part of the Regulations)

These Regulations provide for certain tests for coronavirus to meet specified standards. Regulation 3 specifies the tests to which these Regulations apply. Regulations 4 and 5 set out standards to be met by tests and test providers, respectively. Regulation 6 requires test providers to apply for accreditation with the United Kingdom Accreditation Service. Regulation 7 provides that failure to comply with any requirement of these Regulations is an offence. Regulation 8 requires these Regulations to be reviewed within six months of their coming into force.

An impact assessment has not been produced for this instrument. An explanatory memorandum has been published alongside this instrument at www.legislation.gov.uk.