Search Legislation

The Railways (Miscellaneous Amendments, Revocations and Transitional Provisions) (EU Exit) Regulations 2020

 Help about what version

What Version

  • Latest available (Revised)
  • Original (As made)
 Help about opening options

Opening Options

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

PART 2Amendments to secondary legislation

Amendment of the Railways and Other Guided Transport Systems (Safety) Regulations 2006

2.—(1) The Railways and Other Guided Transport Systems (Safety) Regulations 2006(1) are amended as follows.

(2) In regulation 2—

(a)omit the definition of “conventional Directive”;

(b)for the definition of “European Railway Agency” substitute—

“European Union Agency for Railways” means the Agency established by Regulation (EU) 2016/796(2) of the European Parliament and of the Council on the European Union Agency for Railways and repealing Regulation (EC) No 881/2004;;

(c)omit the definition of “high-speed Directive”;

(d)after the definition of “railway” insert—

“Recast Safety Directive” means Directive (EU) 2016/798 of the European Parliament and the Council on railway safety (recast)(3);.

(3) In regulation 18A(3)(c) for “TSIs” substitute “NTSNs”.

Amendment of the Cross-border Railway Services (Working Time) (Amendment) (EU Exit) Order 2018

3.  In the Cross-border Railway Services (Working Time) (Amendment) (EU Exit) Order 2018(4) omit article 1(3).

Amendment of the Railways (Interoperability) (Amendment) (EU Exit) Regulations 2019

4.—(1) The Railways (Interoperability) (Amendment) (EU Exit) Regulations 2019(5) are amended as follows.

(2) In regulation 2(2)—

(a)in sub-paragraph (a), in the definition of “authorised representative”, in each place it occurs, for “exit day” substitute “IP completion day”;

(b)in sub-paragraph (s), for “exit day” substitute “IP completion day”.

(3) In regulation 2(6)—

(a)in paragraph 6, in the new regulation 3B for “exit day” substitute “IP completion day”;

(b)in paragraph 3, in the new regulation 3C for “exit day” substitute “IP completion day”.

(4) In regulation 2(13)—

(a)in sub-paragraph (b), in the new paragraph (6) for “exit day” substitute “IP completion day”;

(b)in sub-paragraph (c)—

(i)in the new paragraph (9)(a) and (b) for “exit day” substitute “IP completion day”;

(ii)in the new paragraph (10) for “exit day” substitute “IP completion day”.

(5) In regulation 2(27), in the new regulation 23—

(a)in paragraph (2)—

(i)in sub-paragraph (a), for “drawn up before or after exit day” substitute “drawn up before, on or before or after IP completion day”;

(ii)in sub-paragraph (b)(i), for “exit day” substitute “IP completion day”;

(b)in paragraph (3), for “exit day” substitute “IP completion day”;

(c)in paragraph (4), for “after exit day” substitute “on or after IP completion day”.

(6) In regulation 2(29)(f), in the new paragraph (5) for “exit day” substitute “IP completion day”.

(7) In regulation 2(36), in the new regulation 30, in each place it occurs, for “exit day” substitute “IP completion day”.

(8) In regulation 2(48)(b)(ii), for “exit day” substitute “IP completion day”.

(9) In regulation 2(50), in the new regulation 47A, in each place it occurs, for “exit day” substitute “IP completion day”.

(10) In Schedule 4, in paragraph 2 of the new Schedule 5, in each place it occurs, for “exit day” substitute “IP completion day”.

(11) In Schedule 6, in paragraph 2(c) of the new Schedule 7—

(a)for “after exit day” substitute “on or after IP completion day”;

(b)for “before exit day” substitute “before IP completion day”.

(12) In Schedule 8, in paragraph 1(b), in the definition of “relevant specifications”, in each place it occurs, for “exit day” substitute “IP completion day”.

Amendment of the Connecting Europe Facility (Revocation) (EU Exit) Regulations 2019

5.  In regulation 3(3) of the Connecting Europe Facility (Revocation) (EU Exit) Regulations 2019(6) for “the end of 2020 (whether before or after exit day)” substitute “IP completion day”.

Amendment of the Train Driving Licences and Certificates (Amendment) (EU Exit) Regulations 2019

6.—(1) The Train Driving Licences and Certificates (Amendment) (EU Exit) Regulations 2019(7) are amended as follows.

(2) In regulation 2(2)—

(a)in sub-paragraph (c), in the new definition of “the Directive” for “exit day” substitute “IP completion day”;

(b)in sub-paragraph (d), in the new definition of “European train driving licence” for “exit day” substitute “the end of the transitional period”.

Amendment of the Rail Safety (Amendment etc.) (EU Exit) Regulations 2019

7.—(1) The Rail Safety (Amendment etc.) (EU Exit) Regulations 2019(8) are amended as follows.

(2) In regulation 3(2)—

(a)in sub-paragraph (a), before the new definition of “accident” insert—

“2011 EU ECM Regulation” means Commission Regulation (EU) No 445/2011(9) on a system of certification of entities in charge of maintenance for freight wagons and amending Regulation (EC) No 653/2007 as it had effect or as it has effect in EU law, as the context dictates;

“2019 EU ECM Regulation”, save in the expression “retained 2019 EU ECM Regulation”, means Commission Implementing Regulation (EU) 2019/779(10) laying down detailed provisions on a system of certification of entities in charge of maintenance of vehicles pursuant to Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011 as it had effect or as it has effect in EU law, as the context dictates;;

(b)after sub-paragraph (d), insert—

(dd)after the definition of “competent person”, insert—

“cross-border service” means a service for the carriage of passengers or goods by way of the tunnel system;

“cross-border UK-issued ECM certificate” means a certificate issued in the United Kingdom to an entity in charge of maintenance by an accredited or recognised body or by a safety authority in accordance with the retained 2019 EU ECM Regulation;;;

(c)in sub-paragraph (e), in the new definition of “EU ECM Certificate” for “EU ECM Regulation” substitute “2011 EU ECM Regulation or the 2019 EU ECM Regulation as may be applicable”;

(d)for sub-paragraph (g), substitute—

(g)after the definition of “responsible person”, insert—

“retained 2019 EU ECM Regulation” means Commission Implementing Regulation (EU) 2019/779 laying down detailed provisions on a system of certification of entities in charge of maintenance of vehicles pursuant to Directive (EU) 2016/798 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 445/2011, as it has effect in the UK after IP completion day;;;

(e)in sub-paragraph (k), for the new definition of “UK-issued ECM certificate”, substitute—

“UK-issued ECM certificate”, save in the expression “cross-border UK-issued ECM certificate”, means a certificate issued in the United Kingdom to an entity in charge of maintenance by an accredited or recognised body or by a safety authority in accordance with Schedule 10;;

(f)for sub-paragraph (l), substitute—

(l)for paragraph 3 substitute—

(3) Parts 2 and 3 of these Regulations shall not apply to or in relation to the operation of a train or the management or use of infrastructure in the tunnel system, save for—

(a)regulation 18(A1) for vehicles used to operate a cross-border service;

(b)regulation 18B for the tunnel system...

(3) In regulation 3(4)(b)—

(a)in the new paragraph (6)—

(i)in sub-paragraph (b) after “railway safety functions in a member State” insert “or the European Union Agency for Railways”;

(ii)for “European Railway Agency” substitute “European Union Agency for Railways”;

(b)in the new paragraph (7) after “in accordance with Article 16.1 of the Directive” insert “or Article 16.1 of the Recast Safety Directive”.

(4) In regulation 3(6) after paragraph (a), insert—

(aa)after paragraph (1), insert—

(1A) No person may use a vehicle to operate a cross-border service unless that vehicle has an entity in charge of maintenance assigned to it, and that entity in charge of maintenance—

(a)is registered in relation to that vehicle in the National Vehicle Register; and

(b)holds either an EU ECM certificate valid on the terms of its original issue or a cross-border UK-issued ECM certificate, where it is required to do so in accordance with the retained 2019 EU ECM Regulation.;.

(5) In regulation 3(10)—

(a)for sub-paragraph (a) substitute—

(a)in paragraph (1)(a), for “an ECM certificate”, substitute “an EU ECM certificate, a cross-border UK-issued ECM certificate or a UK-issued ECM certificate”;;

(b)for sub-paragraph (b) substitute—

(b)for paragraph (1)(d) substitute—

(d)decision of the Office of Rail and Road, concerning his EU ECM Certificate taken pursuant to either—

(i)Article 7(3), (4) or (7) of the 2011 EU ECM Regulation; or

(ii)Article 7(5) or (8) or 8(2) of the 2019 EU ECM Regulation;;;

(c)in sub-paragraph (c)—

(i)at the end of the new sub-paragraph (dd) omit “or”;

(ii)after the new sub-paragraph (dd) insert—

(de)decision of the Office of Rail and Road, concerning his cross-border UK-issued ECM certificate, taken pursuant to Article 7(5) or (8) or 8(2) of the retained 2019 EU ECM Regulation; or;

(d)in sub-paragraph (d), for the new paragraph (1A), substitute—

(1A) A person who is aggrieved by—

(a)a decision taken either—

(i)to refuse an application for an EU ECM certificate or taken pursuant to Article 7(4) or (7) of the 2011 ECM Regulation by a certification body accredited or recognised in Great Britain for the purposes of the 2011 EU ECM Regulation; or

(ii)to refuse an application for an EU ECM certificate or taken pursuant to Article 7(8) or 8(2) of the 2019 EU ECM Regulation by a certification body accredited or recognised in Great Britain for the purposes of the 2019 EU ECM Regulation;

(b)a decision of a certification body accredited or recognised for the purposes of Schedule 10 either to refuse an application for a UK-issued ECM certificate or taken by that body pursuant to paragraph 7(3), (4) or (7) of Schedule 10; or

(c)a decision of a certification body accredited or recognised for the retained 2019 EU ECM Regulation, either to refuse an application for a cross-border UK-issued ECM certificate or taken by that body pursuant to Article 7(3), (4) or (7) of the retained 2019 EU ECM Regulation,

may appeal to the Secretary of State..

(6) In regulation 3(11), in the new paragraph 1(b)(i), for sub-paragraph (bb) substitute—

(bb)the European Union Agency for Railways or a safety authority in a member State before the end of the second anniversary of exit day(11), under provisions giving effect to Article 10(2)(a) of the Directive or Article 10 of the Recast Safety Directive;.

(7) Omit regulation 10.

(8) In the Schedule, in Part 4 of the new Schedule 8—

(a)in the Application form for a safety certificate in 8.5, 8.7 and 8.9, in each place that it occurs, for “TSIs” substitute “NTSNs”;

(b)in the Guidelines for Compilation in 8.5, 8.7 and 8.9, in each place that it occurs, for “TSIs” substitute “NTSNs”.

Amendment of the Railways (Safety, Access, Management and Interoperability) (Miscellaneous Amendments and Transitional Provision) (EU Exit) Regulations 2019

8.—(1) The Railways (Safety, Access, Management and Interoperability) (Miscellaneous Amendments and Transitional Provision) (EU Exit) Regulations 2019 are amended as follows.

(2) Omit regulation 6(2)(b).

(3) Omit regulation 7(2)(b).

(4) In regulation 11(4), in the new paragraph 3 of Article 3 for “exit day” substitute “IP completion day”.

Amendment of the Cableway Installations (Amendment) (EU Exit) Regulations 2019

9.  In regulation 3 of the Cableway Installations (Amendment) (EU Exit) Regulations 2019(12) in the new definition of “approved body”, in sub-paragraph (b) for “exit day” substitute “IP completion day”.

(1)

S.I. 2006/599, amended by S.I. 2019/837 and S.I. 2019/1310. There are other amending instruments but none are relevant.

(2)

O.J. No. L138, 26.5.2016, p. 1.

(3)

O.J. No. L138, 26.5.2016, p. 102.

(5)

S.I. 2019/345, amended by S.I. 2020/318.

(7)

S.I. 2019/677, amended by S.I. 2020/318.

(8)

S.I. 2019/837, amended by S.I. 2019/1310.

(9)

O.J. No. L 122, 11.5.2011, p. 22.

(10)

O.J. No. L 139I, 27.5.2019, p. 360.

(11)

Exit day is defined in section 20 of the European Union (Withdrawal) Act 2018 (c.16).

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources