http://www.legislation.gov.uk/id/uksi/2020/818

http://www.legislation.gov.uk/uksi/2020/818/regulation/16

The Road Vehicles (Approval) Regulations 2020

text

text/xml

ROAD TRAFFIC

Statute Law Database

2024-06-19

Expert Participation

2022-12-31

These Regulations make provision in connection with Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (OJ No. L 151, 14.6.2018, p.1) (“the Type Approval Regulation”). In particular, they:— appoint the Secretary of State as the approval authority and the market surveillance authority for the purposes of the Type Approval Regulation (regulations 3 and 4)— specify when the Secretary of State may treat any application as having been withdrawn by the manufacturer (regulation 5) or when it must be refused (regulation 6)— require the holder of a type approval to retain certain records (regulation 7)— provide for a review procedure in respect of notices given in connection with decisions taken pursuant to the Type Approval Regulation, etc. (regulation 8)— specify when and how an approval may be withdrawn (regulation 9) and the effect of such a withdrawal or a suspension (regulation 10)— set out how any notice or other document is to be served by the approval authority, market surveillance authority or enforcement authority (regulation 11)— authorise the approval authority to provide and maintain testing stations and apparatus to use for examination of products for the purposes of the Type Approval Regulation (regulation 12)— provide that breach of the duty to provide certain technical information which causes a person to sustain loss or damage is actionable at the suit of that person, and that a defence is available to the manufacturer where they have exercised all due diligence (regulation 13)— provide for an offence of placing on the market or registering a vehicle that is fitted with a defeat system (regulation 14)— provide for applications for, and the granting of, national small series type approval (regulations 15 and 16, and Schedule 1)— provide for recognition of national type approvals of small series granted in other EU Member States (regulation 17)— provide for applications for individual approvals of vehicles (regulation 18 and Schedule 2) and appeals against decisions made (regulation 19)— provide for the form of certificates to be used for national type approval of small series and individual approval (regulation 20)— provide that the grant of a first vehicle licence or the registration of motor vehicles cannot happen unless a certificate of conformity or individual approval has been issued in respect of the vehicle (regulation 21)— provide for consent to be obtained for the supply of large trailers (regulation 23 and Schedule 3) and for certain records to be kept in relation to large trailers and small trailers (regulations 24 and 25)— provide for limits on the number of end-of-series vehicles entering into service (regulation 27)— provide for derogations from the requirements of the Type Approval Regulation in respect of components or separate technical units intended for fitment to vehicles which have been exempted from one or more provisions of the Type Approval Regulation, or which are not required to be type-approved by the Type Approval Regulation (regulation 28)— provide for breach of these Regulations, the Type Approval Regulation or legislation listed in Schedule 5 to be an offence, and for offences to be punishable either by criminal or civil penalties (regulation 29 and Parts 1 and 2 of Schedule 4)— make provision for enforcement of these Regulations, including in connection with false statements and obstruction of officers, powers of search, detention of goods by customs officers and recovery of expenses of enforcement (regulation 29 and Part 3 of Schedule 4)— make consequential amendments to various enactments, and revoke instruments replaced by the Type Approval Regulation (regulation 30(1) and Schedule 6)— provide for the continuation under these Regulations or the Type Approval Regulation of anything done under, or by virtue of, any regulation revoked by these Regulations, if it could have been done under or for the purpose of the corresponding provision of these Regulations or the Type Approval Regulation (regulation 30(2))— make transitional provision in respect of existing national small series type approvals of vehicles over 4m in height (regulation 31)— make transitional provision until the end of 2020 in respect of requirements for paper certificates of conformity in connection with national small series type approval (regulation 32)

The Road Vehicles (Approval) Regulations 2020

Regulations

Automated Vehicles Act 2024

s. 91

s. 96

s. 99(1)

PART 3National small series type approval and individual approval

CHAPTER 1F1Small series type approvals

Annotations:

Amendments (Textual)

Word in Pt. 3 Ch. 1 heading substituted (31.12.2022 at 11.00 p.m.) by The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022 (S.I. 2022/1273), regs. 1(2), 14(1)

Grant of F2GB small series type-approval and UK (NI) national small series type approvalI116

1

The approval authority must—

F3a

make the decision whether or not to grant—

i

a GB small series type-approval or an amendment to such an approval in accordance with Article 42 of the Type Approval Regulation (type-approval of vehicles produced in small series),

ii

a UK (NI) national small series type-approval or an amendment to such an approval in accordance with Article 42 of the EU Type Approval Regulation, or

iii

an amendment to a national small series type-approval granted prior to IP completion day in accordance with Article 42 of the Type Approval Regulation,

b

not grant the approval without first being satisfied that adequate arrangements have been made to ensure that production vehicles conform to the approved type, and

c

give notice of the decision to the applicant.

2

For the purposes of paragraph (1)(a), the alternative requirements required to be laid down under Article 42(2) are the technical or other requirements specified in Schedule 1.

3

Where the approval authority decides to grant or amend F4a type-approval in accordance with paragraph (1), the authority must issue a type approval certificate which complies with regulation 20(1).

4

If the holder of a F5type-approval granted or amended in accordance with paragraph (1) so requests, the approval authority must send, by registered or electronic mail, a copy of the type approval certificate and any attachments relating to it to an authority in a member State F7... corresponding to the approval authority.

5

Upon receiving a request from a person wishing to sell, register or put into service in a member State F8... a vehicle manufactured in conformity with a F6type-approval granted or amended in accordance with paragraph (1), the approval authority must supply to the authority in that member State corresponding to the approval authority a copy of the type approval certificate and any attachments relating to it.

6

The approval authority may refuse to grant a F9GB small series type-approval or a UK (NI) national small series type approval if the authority is not satisfied that the applicant has made adequate arrangements to comply with regulation 7.

7

The holder of F10a type approval granted under paragraph (1) must issue, in respect of each vehicle (whether incomplete, complete or completed) which is manufactured in conformity with that approval, a certificate of conformity which—

a

complies with regulation 20(3), and

b

is numbered sequentially between 1 and the maximum permitted number to denote, in respect of each year of production, the position of the vehicle within the production allocated for that year.

8

In paragraph (7), “maximum permitted number” and “year” have the meanings given in regulation 21(9).

9

Article 36(3) of the Type Approval Regulation F11or, in the case of a UK (NI) national small series type approval, the EU Type Approval Regulation, applies in relation to the issue of a duplicate of a certificate of conformity originally issued under paragraph (7).