SCHEDULES
SCHEDULE 3CO2 emissions estimation and reporting methods and tools
Introduction to the ICAO CORSIA CO2 Estimation and Reporting Tool (CERT)I11
The procedures specified in this Schedule are concerned with the estimation of CO2 emissions by an aeroplane operator for the purposes of monitoring CO2 emissions and filling data gaps. The methods and tools proposed are representative of most accurate established practices.
Use of the CERT for complying with monitoring and reporting requirementsI22
1
The aeroplane operator must use the CERT according to the eligibility criteria as described in article 22 of this Order and upon approval by the Regulator.
2
The aeroplane operator must use either—
a
the Block Time input method, or
b
the Great Circle Distance input method,
to enter the necessary information into the CERT.
3
The aeroplane operator approved to use the Block Time input method—
a
must collect the following data and must enter it into the CERT to estimate its CO2 emissions during the compliance year—
i
ICAO aircraft type - model designator64,
ii
origin aerodrome ICAO Designator65,
iii
destination aerodrome ICAO Designator66,
iv
Block Time (in hours), and
v
number of flights,
b
may collect the following data and, if collected, must enter it into the CERT to estimate its CO2 emissions during the compliance year—
i
date, and
ii
flight ID.
4
The aeroplane operator approved to use the Great Circle Distance input method—
a
must collect the following data and must enter it into the CERT to estimate its CO2 emissions during the compliance year—
i
ICAO aircraft type - model designator,
ii
origin aerodrome,
iii
destination aerodrome, and
iv
number of flights,
b
may collect the following data and, if collected, must enter it into the CERT to estimate its CO2 emissions during the compliance year—
i
date, and
ii
flight ID.