Statutory Instruments
2021 No. 785
Customs
Environmental Protection
The International Waste Shipments (Amendment of Regulation (EC) No 1013/2006 and 1418/2007) Regulations 2021
Made
30th June 2021
Laid before Parliament
1st July 2021
Coming into force
29th July 2021
The Secretary of State makes these Regulations in exercise of the powers conferred by: the first paragraph of Article 37(2); and Articles 58(1)(a) and 59a(3)(a), of Regulation (EC) No 1013/2006 of the European Parliament and of the Council on shipments of waste (“Regulation (EC) No 1013/2006”)(1).
Citation, commencement and extent
1.—(1) These Regulations may be cited as the International Waste Shipments (Amendment of Regulation (EC) No 1013/2006 and 1418/2007) Regulations 2021.
(2) These Regulations come into force on 29th July 2021.
(3) These Regulations extend to England and Wales, Scotland and Northern Ireland.
Amendment to Annex 7 to Regulation (EC) No 1013/2006
2. In table note (4) in Annex 7 to Regulation (EC) No 1013/2006 of the European Parliament and of the Council on shipments of waste omit “, B3010”.
Amendments to the Table in the Annex to Regulation (EC) No 1418/2007
3. The Table in the Annex to Commission Regulation (EC) No 1418/2007 concerning the export for recovery of certain waste listed in Annex III or IIIA to Regulation (EC) No 1013/2006 of the European Parliament and of the Council to certain countries to which the OECD Decision on the control of transboundary movements of wastes does not apply(2) is amended in accordance with the Schedule.
Signed by authority of the Secretary of State for Environment, Food and Rural Affairs
Rebecca Pow
Parliamentary Under Secretary of State
Department for Environment, Food and Rural Affairs
30th June 2021
Regulation 3
SCHEDULEAmendments to the Table in the Annex to Regulation (EC) No 1418/2007
1.Afghanistan
2.Albania
3.Algeria
4.Angola
5.Anguilla
6.Argentina
7.Azerbaijan
8.Bahamas
9.Bangladesh
10.Belarus
11.Bermuda
12.Bolivia
13.Bosnia and Herzegovina
14.Brazil
15.Brunei
16.Burundi
17.Cambodia
18.Cameroon
19.Cape Verde
20.Chile
21.China
22.Chinese Taipei
23.Colombia
24.Costa Rica
25.Cuba
26.Democratic Republic of the Congo
27.Dominican Republic
28.Ecuador
29.Egypt
30.El Salvador
31.Ethiopia
32.French Polynesia
33.Gabon
34.Gambia
35.Ghana
36.Georgia
37.Guatemala
38.Guinea Bissau
39.Guinea (Republic of Guinea)
40.Hong Kong (China)
41.India
42.Indonesia
43.Iran (Islamic Republic of Iran)
44.Iraq
45.Kazakhstan
46.Kenya
47.Kuwait
48.Kyrgyzstan
49.Lebanon
50.Libya
51.Macau (China)
52.Malawi
53.Malaysia
54.Marshall Islands
55.Micronesia (Federated States of Micronesia)
56.Moldova (Republic of Moldova)
57.Montenegro
58.Montserrat
59.Morocco
60.Mozambique and Myanmar
61.Namibia
62.Nepal
63.Niger
64.Oman
65.Pakistan
66.Panama
67.Papua New Guinea
68.Paraguay
69.Philippines
70.Qatar
71.Republic of Congo
72.Russia (Russian Federation)
73.Rwanda
74.Sao Tome and Principe
75.Senegal
76.Serbia
77.Seychelles
78.Singapore
79.Sudan and Suriname
80.Tajikistan
81.Tanzania
82.Thailand
83.Togo
84.Trinidad and Tobago
85.Tunisia
86.Ukraine
87.Uzbekistan
88.Vietnam
89.Wallis and Futuna
90.Zambia
Afghanistan
1. At the beginning of the Table, insert—
“Afghanistan | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Albania
2. Under the heading “Albania” and the sub-heading “Single waste entries”, for the row which contains “B3010 all other waste” substitute—
“B3011”. |
Algeria
3. Under the heading “Algeria” and the sub-heading “Single waste entries”, omit the row which contains “from B3010”.
Angola
4. After the final row under the heading “Andorra”, insert—
“Angola | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Anguilla
5. Under the heading “Anguilla”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Argentina
6. Under the heading “Argentina”—
(a)and the sub-heading “Single waste entries”, omit the row which contains “from B3010”;
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Azerbaijan
7. Under the heading “Azerbaijan” and the sub-heading “Single waste entries”, omit the row which contains “B3010”.
Bahamas
8. After the final row under the heading “Azerbaijan”, insert—
“Bahamas | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Bangladesh
9. Under the heading “Bangladesh”—
(a)and the sub-heading “Single waste entries”, in column “a”, for “B2030—B3010” substitute “B2030—B2130”;
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Belarus
10. Under the heading “Belarus”—
(a)and the sub-heading “Single waste entries”—
(i)in column “c”, for “B1250—B3035” substitute “B1250—B2130”;
(ii)after the row amended by sub-paragraph (i), insert—
“B3011 | |||
B3020—B3035”; |
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Bermuda
11. Under the heading “Bermuda”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Bolivia
12. Under the heading “Bolivia”, in column “d”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Bosnia and Herzegovina
13. Under the heading “Bosnia and Herzegovina”, omit the row which contains “B3010”.
Brazil
14. Under the heading “Brazil”—
(a)and the sub-heading “Single waste entries”—
(i)in column “c”, for “B2040—B3050” substitute “B2040—B2130”;
(ii)after the row amended by sub-paragraph (i), insert—
“B3011 | |||
B3020—B3050”; |
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Brunei
15. After the final row under the heading “Brazil”, insert—
“Brunei | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Burundi
16. Under the heading “Burundi”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Cambodia
17. Under the heading “Cambodia”—
(a)and the sub-heading “Single waste entries”, for the row which contains “B3010” substitute—
“From B3011: —All other wastes | From B3011: —polyethylene —polyethylene terephthalate”; |
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Cameroon
18. After the final row under the heading “Cambodia”, insert—
“Cameroon | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Cape Verde
19. For the rows under the heading “Cape Verde” substitute—
“a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Chile
20. Under the heading “Chile”, in column “d”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
China
21. Under the heading “China”—
(a)and the sub-heading “Single waste entries”, for the row which contains “from B3010” substitute—
“B3011”; |
(b)and the sub-heading “Mixtures of waste”, omit the three rows which contain “Mix B3010”.
Chinese Taipei
22. Under the heading “Chinese Taipei”—
(a)and the sub-heading “Single waste entries”, for the row which contains “from B3010” substitute—
“From B3011: —Mixtures of separated polyethylene, polypropylene and/or polyethyleneterephthahalte | From B3011: —Non-halogenated polymers —Cured resin or condensation product —Fluorinated polymer”; |
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Colombia
23. Under the heading “Colombia” and the sub-heading “Single waste entries”, for the row which contains “B2060-B3020” substitute—
“B2060—B2130 | |||
B3011 | |||
B3020”. |
Costa Rica
24. Under the heading “Costa Rica” and the sub-heading “Single waste entries”, for the row which contains “B1010-B3050” substitute—
“B1010—B2130 | B1010—B2130 | ||
B3011 | |||
B3020—B3050 | B3020—B3050”. |
Cuba
25. Under the heading “Cuba”, in column “c”, after “all waste listed in Annex III of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Democratic Republic of the Congo
26. Under the heading “Democratic Republic of the Congo”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Dominican Republic
27. Under the heading “Dominican Republic”, in column a, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Ecuador
28. For the rows under the heading “Ecuador” substitute—
“a | b | c | d |
From B3011: —Non-halogenated polymers —Fluorinated polymer —Mixtures of separated polyethylene, polypropylene and/or polyethyleneterephthalate | From B3011: —Cured resin or condensation product | ||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Egypt
29. Under the heading “Egypt” and the sub-heading “Single waste entries”, for the row which contains “B1080 - B4030” substitute—
“B1080—B2130 | |||
B3011 | |||
B3020—B4030”. |
El Salvador
30. For the rows under the heading “El Salvador” substitute—
“ a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006 | All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Ethiopia
31. For the rows under the heading “Ethiopia” substitute—
“a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
French Polynesia
32. Under the heading “French Polynesia”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Gabon
33. Under the heading “Gabon” and the sub-heading “Mixtures of wastes”, in column “a”, after “All mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Gambia
34. Under the heading “Gambia”, in column “d”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Ghana
35. Under the heading “Ghana”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Georgia
36. Under the heading “Georgia”—
(a)and the sub-heading “Single waste entries”, in column “d”, for “B3010—B3035” substitute “B3011—B3035”;
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Guatemala
37. For the rows under the heading “Guatemala” substitute—
“a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Guinea Bissau
38. After the final row under the heading “Guatemala”, insert—
“Guinea Bissau | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Guinea (Republic of Guinea)
39. Under the heading “Guinea (Republic of Guinea)”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Hong Kong (China)
40. Under the heading “Hong Kong (China)” and the sub-heading “Single waste entries”, in column “d”, for “B3010—B3030” substitute “B3011—B3030”.
India
41. For the rows under the heading “India” substitute—
“a | b | c | d |
From B3011: —All other wastes | From B3011: —polyethylene —polymethyl methacrylate | ||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Indonesia
42. Under the heading “Indonesia”, for the row which contains “B3010” substitute—
“From B3011: —Cured resin or condensation product —Fluorinated polymer | From B3011: —Non-halogenated polymers —Mixtures of separated polyethylene, polypropylene and/or polyethyleneterephthalate”. |
Iran (Islamic Republic of Iran)
43. Under the heading “Iran (Islamic Republic of Iran)”, in column “b”, for “B3010—B3020” substitute “B3020”.
Iraq
44. After the final row under the heading “Iran (Islamic Republic of Iran)”, insert—
“Iraq | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Kazakhstan
45. Under the heading “Kazakhstan” and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Kenya
46. Under the heading “Kenya” and the sub-heading “Single waste entries”, in column “a”, after “All waste listed in Annex III of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Kuwait
47. Under the heading “Kuwait”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Kyrgyzstan
48. Under the heading “Kyrgyzstan” and the sub-heading “Single waste entries”, omit the row which contains “from B3010”.
Lebanon
49. Under the heading “Lebanon”, omit the row which contains “from B3010”.
Libya
50. After the final row under the heading “Liberia”, insert—
“Libya | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Macau (China)
51. Under the heading “Macau (China)”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Malawi
52. For the rows under the heading “Malawi” substitute—
“a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Malaysia
53. Under the heading “Malaysia” and the sub-heading “Single waste entries”, in column “d”, for “B3010-B3020” substitute “B3011-B3020”.
Marshall Islands
54. After the final row under the heading “Mali”, insert—
“Marshall Islands | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Micronesia (Federated States of Micronesia)
55. After the final row under the heading “Mauritius (Republic of Mauritius)”, insert—
“Micronesia (Federated States of Micronesia) | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Moldova (Republic of Moldova)
56. Under the heading “Moldova (Republic of Moldova)” and the sub-heading “Single waste entries”, in column “a”, for “B2030—B3010” substitute “B2030—B2130”.
Montenegro
57. For the rows under the heading “Montenegro” substitute—
“a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Montserrat
58. Under the heading “Montserrat”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Morocco
59. Under the heading “Morocco” and the sub-heading “Single waste entries”, for the row which contains “from B3010” substitute—
“B3011 | B3011”. |
Mozambique and Myanmar
60. After the final row under the heading “Morocco”, insert—
“Mozambique | |||
---|---|---|---|
a | b | c | d |
B3011 | |||
Myanmar | |||
a | b | c | d |
B3011”. |
Namibia
61. For the rows under the heading “Namibia” substitute—
“a | b | c | d |
From B3011: —Cured resin or condensation product —Fluorinated polymer | From B3011: —Non-halogenated polymers —Mixtures of separated polyethylene, polypropylene and/or polyethyleneterephthalate | From B3011: —Non-halogenated polymers | |
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Nepal
62. Under the heading “Nepal” and the sub-heading “Single waste entries”, in column “a”, for “B2070—B3010” substitute “B2070—B3011”.
Niger
63. Under the heading “Niger”—
(a)and the sub-heading “Single waste entries”, in column “a”, for “B2010—B3010” substitute “B2010—B2130”;
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Oman
64. Under the heading “Oman”, after the row which contains “from B1010: all others”, insert—
“B3011”. |
Pakistan
65. Under the heading “Pakistan”—
(a)and the sub-heading “Single waste entries”, for the row which contains “B3010” substitute—
“B3011”; |
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Panama
66. After the final row under the heading “Pakistan”, insert—
“Panama | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Papua New Guinea
67. Under the heading “Papua New Guinea”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Paraguay
68. Under the heading “Paraguay”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Philippines
69. Under the heading “Philippines”—
(a)and the sub-heading “Single waste entries”, omit the row which contains “B3010”;
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Qatar
70. Under the heading “Qatar”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Republic of Congo
71. After the final row under the heading “Qatar”, insert—
“Republic of Congo | |||
---|---|---|---|
a | b | c | d |
B3011”. |
Russia (Russian Federation)
72. Under the heading “Russia (Russian Federation)” and the sub-heading “Single waste entries”, in column “d”, for “B1250—B3010” substitute “B1250—B2130”.
Rwanda
73. Under the heading “Rwanda”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Sao Tome and Principe
74. After the final row under the heading “Saint Vincent and the Grenadines”, insert—
“Sao Tome and Principe | |||
---|---|---|---|
a | b | c | d |
From B3011: —Non-halogenated polymers | From B3011: —Cured resin or condensation product —Fluorinated polymer —Mixtures of separated polyethylene, polypropylene and/or polyethyleneterephthalate”. |
Senegal
75. Under the heading “Senegal”, in the sub heading “Single waste entries”, for the row which contains “B1010—B3020” substitute—
“B1010—B2130 | |||
B3020”. |
Serbia
76. Under the heading “Serbia”, in column “d”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Seychelles
77. Under the heading “Seychelles” and the sub-heading “Single waste entries”, for the row which contains “B1010—B3040” substitute—
“B1010—B2130 | |||
B3011 | |||
B3020—B3040”. |
Singapore
78. For the rows under the heading “Singapore” substitute—
“a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Sudan and Suriname
79. After the final row under the heading “Sri Lanka”, insert—
“Sudan | |||
---|---|---|---|
a | b | c | d |
B3011 | |||
Suriname | |||
a | b | c | d |
B3011”. |
Tajikistan
80. Under the heading “Tajikistan” and the sub-heading “Single waste entries”, for the row which contains “B3010—B3020” substitute—
“B3011 | |||
B3020”. |
Tanzania
81. Under the heading “Tanzania” and the sub-heading “Mixtures of wastes”, in column “a”, after “All mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Thailand
82. Under the heading “Thailand”—
(a)and the sub-heading “Single waste entries”, for the row which contains “B3010” substitute—
“From B3011: —Cured resin or condensation product —Fluorinated polymer —Mixtures of separated polyethylene, polypropylene and/or polyethyleneterephthalate | From B3011: —Non halogenated polymers”; |
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Togo
83. Under the heading “Togo”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Trinidad and Tobago
84. For the rows under the heading “Trinidad and Tobago” substitute—
“a | b | c | d |
B3011 | |||
All other waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”. |
Tunisia
85. Under the heading “Tunisia”—
(a)and the sub-heading “Single waste entries”, in column “a”, for “B1250—B3010” substitute “B1250—B2130”;
(b)and the sub-heading “Mixtures of wastes”, omit the three rows which contain “Mix B3010”.
Ukraine
86. Under the heading “Ukraine”, omit the row which contains “B3010 except for:”.
Uzbekistan
87. Under the heading “Uzbekistan” and the sub-heading “Single waste entries”, for the row which contains “B2060—B3060” substitute—
“B2060—B2130 | |||
B3020—B3060”. |
Vietnam
88. Under the heading “Vietnam” and the sub-heading “Single waste entries”, for the row which contains “B3010—B3020” substitute—
“From B3011: —Cured resin or condensation product —Fluorinated polymer | From B3011: —Non-halogenated polymers —Mixtures of separated polyethylene, polypropylene and/or polyethyleneterephthalate | ||
B3020”. |
Wallis and Futuna
89. Under the heading “Wallis and Futuna”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
Zambia
90. Under the heading “Zambia”, in column “a”, after “All waste listed in Annex III and mixtures of wastes listed in Annex IIIA of Regulation (EC) No 1013/2006”, insert “, except B3011”.
EXPLANATORY NOTE
(This note is not part of the Regulations)
Regulation (EC) No 1418/2007 concerning the export for recovery of certain waste listed in Annex III or IIIA to Regulation (EC) No 1013/2006 of the European Parliament and of the Council (“Regulation (EC) No 1013/2006”) to certain countries to which the OECD Decision on the control of transboundary movements of wastes does not apply (“Regulation (EC) No 1418/2007”) forms part of domestic law on and after IP completion day (11 p.m. on 31st December 2020) (see section 3 of the European Union (Withdrawal) Act 2018 (c. 16).
These Regulations amend the Annex to Regulation (EC) No 1418/2007 to set out export control procedures for a new category of sorted, non-hazardous, plastic waste classified as B3011, which had previously been a subset of classification B3010.
These Regulations also amend both Annex 7 to Regulation (EC) No 1013/2006 and the Annex to Regulation (EC) No 1418/2007 in order to remove defunct references to plastic waste classified as B3010, which is no longer a classification used in the Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and their Disposal, adopted on 22nd March 1989(3), amended by Decision BC-14/12(4).
An impact assessment has not been produced for this instrument as no, or no significant, impact on the private or voluntary sector is foreseen.
EUR 2006/1013, amended by S.I. 2019/473, 2019/590, 2020/1455. Articles 37(2) and 58(1)(a) were amended by S.I. 2019/473 so that the powers contained in them, and as a consequence the power contained in Article 59a(3)(a), is now vested in the Secretary of State.
EUR 2007/1418, amended by S.I. 2019/590.
The consolidated text of the Basel Convention may be seen here: http://www.basel.int/TheConvention/Overview/ TextoftheConvention/tabid/1275/Default.aspx.
Decision BC-14/12 may be seen here: http://www.basel.int/Implementation/Plasticwaste/Decisions/tabid/6069/Default.aspx.