PART 4EU Regulations
CHAPTER 2Other EU Regulations
Commission Regulation (EU) No 109/201163
1
Commission Regulation (EU) No 109/2011 is amended as follows.
2
In Article 1 (scope), for “Annex II to Directive 2007/46/EC” substitute “Article 4 of Regulation (EU) 2018/858”
.
3
In Article 2 (definitions)—
a
in point (11), for the words from “point 2.15” to the end, substitute “point 35 of Article 2 of Commission Regulation (EU) No. 1230/2012110”
;
b
in point (12), for the words from “point 2.6” to the end, substitute “point 4 of Article 2 of Commission Regulation (EU) No. 1230/2012”
;
c
in point (13), for the words from “as defined” to the end, substitute “which comes into contact with the ground”
;
d
in point (15), for “as defined in point 2.1.1.2.2 of Annex I to Directive 97/27/EC” substitute “which is designed and constructed exclusively or principally to tow semi-trailers”
;
e
in point (16), for “point 2.8 of Annex I to Directive 2007/46/EC”, substitute “point 7 of Article 2 of Commission Regulation (EU) No. 1230/2012”
.
4
In Article 3 (EC type-approval of a vehicle re spray suppression systems)—
a
in the heading, and in paragraph 1, for “EC type-approval” substitute “GB type-approval”
;
b
in paragraphs 3 and 4, for “an EC type-approval” substitute “a GB type-approval”
;
c
in paragraph 3—
i
in the first subparagraph, for “Annex VII to Directive 2007/46/EC” substitute “Annex IV to Commission Implementing Regulation (EU) 2020/683”
;
ii
in the second subparagraph, for “An approval” substitute “The approval”
.
5
In Article 4 (EC separate technical unit type-approval of spray suppression systems)—
a
in the heading, and in paragraph 1 for “EC separate” substitute “GB separate”
;
b
in paragraph 2—
i
in the first subparagraph—
aa
for “an EC” substitute “a GB”
;
bb
for “Annex VII to Directive 2007/46/EC” substitute “Annex IV to Commission Implementing Regulation (EU) 2020/683”
;
ii
in the second subparagraph, for “An approval” substitute “The approval”
;
c
in paragraph 3, for “EC type-approval” substitute “GB type-approval”
.
6
In Article 5 (EC separate technical unit type-approval mark)—
a
for “EC separate”, in the heading and the first other time it occurs, substitute “GB separate”
;
b
for “an EC” substitute “a GB”
;
c
at the end, insert as a new subparagraph—
This Article does not apply to a separate technical unit which was manufactured before 1 February 2026 and is of a type which has been approved by an approval authority of a member State in accordance with Commission Regulation (EU) 109/2011111 or Annex VIII of Commission Implementing Regulation (EU) 2021/535112, in each case as they have effect in EU law.
7
In Article 6—
a
omit “National authorities shall permit”;
b
for “2012 and” substitute “2012 is permitted, and the approval authority must”
.
8
After Article 7 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”
9
In Annex I (administrative documents for EC type approval of vehicles re their spray suppression systems)—
a
in the heading and in the first paragraph of Part 1, for “EC type-approval” substitute “GB type-approval”
;
b
in Part 2—
i
in the certificate heading, and each time it occurs, for “EC type-approval” substitute “GB type-approval”
;
ii
in the opening section, for “Regulation (EU) … / …, as last amended by Regulation (EU) No …/…” substitute “Regulation (EU) No 109/2011, as it has effect in domestic law, and as last amended by S.I. …../……”
;
c
in note (3) after Part 2, for “Directive 2007/46/EC, Annex II, Section A” substitute “Article 4 of Regulation (EU) 2018/858”
;
d
in the heading to the Addendum to Part 2, for “EC type-approval” substitute “GB type-approval”
.
10
In Annex II (administrative documents for EC type-approval of spray suppression systems as separate technical units)—
a
in the heading and each time it occurs, for “EC type-approval” substitute “GB type-approval”
;
b
in Part 1—
i
in point 0.7, for “EC approval” substitute “GB approval”
;
ii
in point 1.3, for “EC component” substitute “GB component”
;
c
in Part 2—
i
in the opening section, for “Regulation (EU) No … / …, as last amended by Regulation (EU) No …/…” substitute “Regulation (EU) No 109/2011, as it has effect in domestic law, and as last amended by S.I. …../……”
;
ii
in point 0.7 of section I, for “EC approval” substitute “GB approval”
;
d
in Part 3—
i
for point 1.1, substitute—
1.1
A rectangle surrounding the lower-case letter “g” followed by the number “11”.
ii
in point 3, for the example of a separate technical unit type-approval mark, substitute—
iii
in the legend following the example, omit “by The Netherlands”.
11
In Annex III (requirements and tests for spray suppression devices)—
a
in the heading to point 2, for “EC component” substitute “GB component”
;
b
in point 2.1—
i
for “EC component” substitute “GB component”
;
ii
for “Article 7 of Directive 2007/46/EC” substitute “Article 23 of Regulation (EU) 2018/858”
;
c
in point 2.4.1, for “EC component” substitute “GB component”
;
d
in point 2.4.2, for “the Appendix of Annex VII to Directive 2007/46/EC” substitute “Annex V to Commission Implementing Regulation (EU) 2020/683”
.
12
In Annex IV (requirements for type-approval of vehicles re their spray suppression systems), in point 0.1, for “Annex II to Directive 2007/46/EC” substitute “Annex I to Regulation (EU) 2018/858”
.
13
In Annex V (conformity of production and cessation of production)—
a
in point 1.1, 1.2 and 2, for “EC component” each time it occurs, substitute “GB component”
;
b
in point 1.1 for “EC type-approval” substitute “GB type-approval”
.